Scribd
Upload
222 views1 page

C9M

The document summarizes the properties and applications of Sandvik grade C9M cemented carbide. It is composed of 9% nickel and 91% tungsten carbide, has a medium carbide grain size, and provides good toughness, medium wear resistance, and high corrosion resistance while being non-magnetic. It is recommended for punch tooling and has a hardness of 375 HRA90, fracture toughness of 10.8 MPa√m, and compressive strength of 5,000 MPa. It also has high corrosion resistance and medium wear resistance.

Uploaded by

Горан Јараковић
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
222 views1 page

C9M

The document summarizes the properties and applications of Sandvik grade C9M cemented carbide. It is composed of 9% nickel and 91% tungsten carbide, has a medium carbide grain size, and provides good toughness, medium wear resistance, and high corrosion resistance while being non-magnetic. It is recommended for punch tooling and has a hardness of 375 HRA90, fracture toughness of 10.8 MPa√m, and compressive strength of 5,000 MPa. It also has high corrosion resistance and medium wear resistance.

Uploaded by

Горан Јараковић
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Cemented Carbide Grade for Can Tooling

SANDVIK Grade C9M 9% Ni and 91% tungsten carbide (WC). Medium carbide grain size. Good toughness. Medium wear resistance. High corrosion resistance. Non-magnetic.

SANDVIK C9M

x 1600
Applications Grade C9M is recommended for: Punch.

Physical and mechanical properties


Grade Hardness HV30 C9M 1 375 HRA 90.1 Fracture*) toughness K1C MPa m1/2 10.8 Compressive strength MPa psi 5 000 725 000 Density g/cm3 14.60 Corrosion resistance 0-10 7 Wear resistance 0-10 4

Ref.no. H-8116PD ENG (Printed 2002.04)

Corrosion and wear resistance data is subjective in accordance with 0 = very low resistance and 10 = very high resistance. All data shown are typical values. *) As per Palmqvist method.

SANDVIK HARD MATERIALS


Argentina Australia Austria Belgium/Luxembourg Brazil Canada Chile China Czech Republic Denmark Estonia Finland France Germany Hungary India Indonesia Ireland Italy Japan Korea Lethuania Latvi Malaysia Mexico Netherlands New Zealand Norway Philippines Peru Poland Portugal Russia Singapore Slovak Republic South Africa Spain Sweden Switzerland Taiwan Thailand Turkey UK USA Please find contact details on www.hardmaterials.sandvik.com

You might also like