Scribd
Upload
370 views2 pages

Electrical Crimping Tool PDF

The document describes an electrical crimping tool model EM-6B2. It is suitable for crimping pre-insulated terminals from 0.25mm2 to 10mm2 and cutting copper and aluminum at 7mm. It has seven interchangeable die sets and is powered by a fixed speed motor for efficient and high quality crimping. It is well-suited for crimping large or medium quantities of terminals.

Uploaded by

baolifeng
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
370 views2 pages

Electrical Crimping Tool PDF

The document describes an electrical crimping tool model EM-6B2. It is suitable for crimping pre-insulated terminals from 0.25mm2 to 10mm2 and cutting copper and aluminum at 7mm. It has seven interchangeable die sets and is powered by a fixed speed motor for efficient and high quality crimping. It is well-suited for crimping large or medium quantities of terminals.

Uploaded by

baolifeng
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Baolifeng ToolsCo.

,LTD
www.blf-tools.com
Electrical Crimping Tool,Battery Cable Crimper,Pneumatic Tool
EM-6B2 Electrical Crimping Tool

Product Description:

Type EM-6B2 is an ideal crimper for connection in cabinet. It is applicable for pre-insulated terminal crimping from 0.25mm2 to 10mm2 and Cu/AI cutting in 7mm. It is supplied with seven kinds of accurate and replaceable die sets. The crimper has high working efficiency and wide application. The crimper is driven by fixed speed motor so that it owns advantages of high efficiency and high quality not only in crimping force but crimping speed. It is good for terminal crimping in large or medium quantity. If there are a lot of different kinks of terminals to be crimped, this crimper is the best choice.

Specification Model Output Max Crimping Force Crimping Time 1.8s(50Hz) Volts Power Consumption Dimension Weight AC100-125V 90W 325*265* 150mm 12Kg 1.8s(50Hz) AC200-230V 90W 325*265* 150mm 12Kg AM-10 Pneumatic Crimping Tool EM-6B1 12.7KN Insulated Terminal 5.5mm2 1.5s(60Hz) EM-6B2 12.7KN Insulated Terminal 5.5mm2 1.5s(60Hz)

Product Description:

The machine is driven by dual-action normal cylinder,Which has advantages of high efficiency and quality in crimping force and speed.The machine is fit for crimping many kinds of terminals.The die sets are interchangeable with our manual crimping tools.So we can provide you all kinds of die sets for crimping. Accessories:one die set,one foot air valve,two air pipes.

Specification Description AM-10 Non-Insulated Terminal <= 10mm2 Range of Application Insulated Terminal <= 6mm2 Wire-end ferrules<= 25mm2 Output force Application air pressure External Dimension Weight 13.5KN 0.4-1Mpa 260*120* 140mm 4Kg

You might also like