Scribd
Upload
142 views

VB71 Valve

This document provides specifications for a ball valve with the following details: - Valve tag number: VB-71 - Piping class rating: 50 to 600 - Construction: Cast - Size range: DN (Note 2) - Materials: Body - ASTM A216 Gr. WCB, Trim - SS 316L - Design features: Anti-blowout stem, secondary metal to metal seals - Testing requirements: Radiography, hydrostatic test at 2225 PSIG for body and 1650 PSIG for seat

Uploaded by

scribd_thakur
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
142 views

VB71 Valve

This document provides specifications for a ball valve with the following details: - Valve tag number: VB-71 - Piping class rating: 50 to 600 - Construction: Cast - Size range: DN (Note 2) - Materials: Body - ASTM A216 Gr. WCB, Trim - SS 316L - Design features: Anti-blowout stem, secondary metal to metal seals - Testing requirements: Radiography, hydrostatic test at 2225 PSIG for body and 1650 PSIG for seat

Uploaded by

scribd_thakur
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

VALVE SPECIFICATION

VALVE TAG NO. STANDARD


This drawing and design it covers are property of AKER KVAERNER ENG. S.E.A SDN. BHD. They are merely loaned and on the borrower's express agreement that it will not be reproduced, exhibited nor used except in the limited way and private use permitted by writing consent given by the lender to the borrower.

MANUF'S OFFER
: : : D1N, PD1N (NOTE 2) 600# FLANGED, RF, ASME B16.5 (NOTE 12) STANDARD : : ENDS MATERIAL : MFGRS CAT/FIG RATING : CONSTRUCTION

: VB - 71 : API 6D / BS 5351 : 50 TO 600 CONSTRUCTION CAST

PIPING CLASS RATING ENDS MATERIAL

SIZE RANGE (DN) BODY GLAND STEM BALL BODY SEAT STEM SEAL BODY SEAL BODY STUD BODY NUT

VALVE DESCRIPTION

ASTM A216 GR. WCB SS 316L

ANTI BLOWOUT TRUNNION MOUNTED SECONDARY METAL TO METAL RENEWABLE WITH VALVE OPEN ON STREAM

SS 316L (NO CASTING) SS 316L SOFT SEAT (NOTE 11) GRAFOIL / PTFE V-RINGS + GRAFOIL GRAFOIL / PTFE ASTM A193 GR. B7M (HOT DIP GALV.) ASTM A194 GR. 2HM (HOT DIP GALV.)

RADIOGRAPHY / DP / MP VALVE OPERATION FIRE SAFE REQUIREMENTS SPECIAL SERVICE CONDITION

AS PER GENERAL NOTES OF PIPING MATERIAL SPECIFICATION (B193-SP-PP-0001) LEVER OPERATED (NOTE 10) CARBON STEEL COATED WITH PVC GRIP

AS PER GENERAL NOTES OF PIPING MATERIAL SPECIFICATION (B193-SP-PP-0001) MAX. TEMP 121C SOUR SERVICE (NOTE 9)

PAINTING / COATING SPRINGS (IF ANY) OTHERS HYDROSTATIC TEST PRESSURE TEST PRESSURE WITH AIR

AS PER ONGC SPECIFICATION FOR PROTECTIVE COATING (ONGC SPEC 2005) INCONEL X-750

BODY : 2225 PSIG 80 PSIG TESTING STANDARD:

SEAT : 1650 PSIG API 598 / BS 6755 PART 1 (LATEST)

NOTES:1. THIS VALVE SPEC. SHEET SHALL BE READ IN CONJUNCTION WITH GENERAL NOTES & PIPING MATERIAL SPECIFICATIONS D1N, PD1N OF B193-SP-PP-0001. 2. ALL VALVES FOR PIPING CLASS PD1N SHALL BE FULL BORE AND FOR VALVES IN PIPING CLASS D1N SHALL BE REDUCED BORE , UNLESS OTHERWISE SPECIFIED. 3. ALL VALVES SHALL BE BI-DIRECTIONAL. 4. ALL VALVES SHALL BE PROVIDED WITH ANTISTATIC DEVICE AND POSITION INDICATORS. 5. ACCEPTABLE LEAKAGE RATES SHALL BE AS PER BS 6755 PART 1, RATE B. 6. FACE TO FACE DIMENSIONS OF VALVE SHALL BE AS PER ASME B16.10. 7. BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART / MATERIALS OF VALVE IN THE SPACE PROVIDED. FOR WHEREVER BIDDER AGREES SPECIFICATION FOR BALL VALVES PROJECT: B-193 FIELD DEVELOPMENT PROJECT A

WITH AKER'S SPEC, BIDDER SHALL INDICATE "AGREED". 8. NO CUTTING / OVERWRITING BY BIDDER ON AKER'S SPEC IS ALLOWED. 9. THE VALVE SHALL MEET THE REQUIREMENTS OF NACE MR-01-75 / ISO 15156 & ONGC SPEC 2004A. 10. VALVES DN150 AND ABOVE TO BE GEAR OPERATED. 11. VENDOR SHALL PROPOSE SUITABLE SEAT MATERIAL AND FURNISH THE P-T CURVE OF THE OFFERED MATERIAL. 12. SURFACE FINISH - SMOOTH FINISH. SIGNATURE & SEAL OF MANUFACTURER REV DATE 29.05.2008 REVISION Issue for Pre-Bid BY LTH CHK ASHOK APP ASHOK SPECIFICATION B193-SP-PP-0002

VB-71

You might also like