Scribd
Upload
335 views

Firmware Upgrade Guide

This document provides instructions for updating the firmware on a Samsung CLP-365W printer. It notes to leave the printer and computer on during the update and disconnect other USB printers. The latest firmware version is V3.xx.02.02 and improves print quality. The update process involves running two executable files to download and install the firmware update, which takes approximately 2 minutes as indicated by the printer's LED lights.

Uploaded by

Jonathan Arana Mora
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
335 views

Firmware Upgrade Guide

This document provides instructions for updating the firmware on a Samsung CLP-365W printer. It notes to leave the printer and computer on during the update and disconnect other USB printers. The latest firmware version is V3.xx.02.02 and improves print quality. The update process involves running two executable files to download and install the firmware update, which takes approximately 2 minutes as indicated by the printer's LED lights.

Uploaded by

Jonathan Arana Mora
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Firmware Upgrade Guide

Note - Please do not turn off the printer and your computer until firmware update finishes. - If you are using USB connection, disconnect all other USB printers from the PC. - The firmware update you are about to install has been tested for compatibility with Samsung toner cartridge products ONLY. Installing the upgrade may cause a non-Samsung toner cartridge to malfunction. - Do not run your printer during the firmware update.(Do not have any print job) Model Name : CLP-365W The latest version : Updated Items Print quality has been improved. How to update the firmware. Important! Please follow the procedures carefully V3.xx.02.02

1) Make sure that the machine is connected to the PC with a USB cable or Network 2) Execute CLP365W_Upgrade_Patch.exe And then patch rom will be download on the machine via USB or Network port 3) Please wait until green LED is ON.(About 2 minute) * Reference 3.1) Red LED Blinking for about 30 sec 3.2) Green LED ON for 30 sec 3.3) Red LED Blinking for 60 sec 3.4) Green LED ON 4) Execute CLP-365W_V3.xx.02.02.exe 5) Please wait until the machine is reboot.

You might also like