Scribd
Upload
25 views

Product Specification: PDM-88230DMBW01

This document specifies the details of an LED product called PDM-88230DMBW01. It is an 8x8 matrix LED with a white emitting color. The mechanical dimensions and electrical characteristics such as forward voltage, luminous intensity, and chromaticity coordinates are provided. Precautions for use and packing specifications are also noted.

Uploaded by

api-62031994
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

Product Specification: PDM-88230DMBW01

This document specifies the details of an LED product called PDM-88230DMBW01. It is an 8x8 matrix LED with a white emitting color. The mechanical dimensions and electrical characteristics such as forward voltage, luminous intensity, and chromaticity coordinates are provided. Precautions for use and packing specifications are also noted.

Uploaded by

api-62031994
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

PRODUCT SPECIFICATION

Part Number

PDM-88230DMBW01
Details
2.3 (58.36mm) Matrix Height 8 x 8 Array with X-Y Select Emitting Color: White InGaN Dice Used Column Cathode, Row Anode Case Mold Type RoHS Compliant Gray Face, White Dot Easy mounting on PCB or socket

Features

Mechanical Dimensions

Notes:

1. All pins are 0.50[.020]0.1 [.004] 2. Dimension in millimeter [inch], tolerance is 0.25 [.010] and angle is 1 unless otherwise noted.

www.ptec.net

071513Rev0MS

Page1of7

Device Selection Guide


Model Number PDM-88230DMBW01 Material InGaN Chip Emitting Color White Description Column Row Cathode Anode

Absolute Maximum Ratings at Ta=25


Parameter Symbol Rating Unit 114 mW Power Dissipation per Dice PAD -0.4 Derating Liner from 25 per Dice mA/ 30 mA Continuous Forward Current Per Dice IAF Peak Current Per Dice (duty cycle 1/10, 1KHz) IPF 100 mA Reverse Voltage Per Dice VR 5 V Electrostatic Discharge (HBM) ESD 1500 V Operating Temperature Topr -35~+85 Storage Temperature Tstg -35~+85 Note: Solder Conditions:1/16 inch below seating plane for 3 seconds at 260. Or temperature of unit (during assembly) not over max.
temperature rating above.

Electrical and Optical Characteristics at Ta=25


Parameter Forward Voltage Per Segment Luminous Intensity Per Segment Chromaticity Coordinates Dominant Wavelength Reverse Current Luminous Intensity Matching Ratio Symbol VF Iv X Y IR Iv-m Min. -92 ----Typ. 3.2 250 0.27 0.25 --Max. 3.8 -50 2:1 Unit V mcd --A -Condition IF=20mA IF=10mA IF=10mA VR=5V
Ip=80mA 1/16Duty

Luminous General lv Bin Grade (IF = 10mA)

Note: Unit=mcd Tolerance 20%

www.ptec.net

071513Rev0MS

Page2of7

Color Rank Limits (IF =10mA)

www.ptec.net

071513Rev0MS

Page3of7

All Light On Segments Feature & Pad Position

Internal Circuit Diagram

www.ptec.net

071513Rev0MS

Page4of7

Typical Electrical / Optical Characteristic Curves

www.ptec.net

071513Rev0MS

Page5of7

Precautions for Use

www.ptec.net

071513Rev0MS

Page6of7

Packing Specifications

Note: 1. Specifications subject to change without notice.

www.ptec.net

071513Rev0MS

Page7of7

You might also like