D-Link And TheGreenBow Solution

DFL-800
Netdefend IPS/UTM
Firewall
Application Note

Version 2.01
(2009-10-24)

D-Link International 1
Confidential and proprietary
 Revision History
Date Rev. Description Editor
Interoperability Compliance Testing Negotiate mode for
2009-4-24 1.0 Phase1 and Phase2 using TheGreenBow VPN Client John Yoong
software and D-Link product’s DFL-800.
Added the function VPN User Authentication using
TheGreenBow VPN Client software (X-Auth) and DFL- 800
2009-5-28 2.0
(External Radius Server) and changed the network
John Yoong
diagram.
Changing DFL-800 firmware from 2.20.00 to 2.26.00.06 and
2009 -10-24 2.01 TheGreenBow VPN Client firmware 4.60.00 to 4.61.003 and John Yoong
edit TheGreenBow client picture for “PFS” setting.

1. Introduction
The objective of this document is to provide a guide describing how to configure the
devices to achieve the same environment as show at the network topology.

Users of this document are expected to already possess basic knowledge of D-Link
devices and TheGreenBow VPN software, and are familiar with how to perform basic
configurations. Only important configurations, such as those pertaining to interfacing and
integrating, will be described in this document.

For purpose of reference, configuration files for each device are available for download.

2. Audience
This document is intended for project engineers or end users that need to implement
DFL series and TheGreenBow software at the sites.

3. Objective
This topology consist the scenarios that integrates using TheGreenBow VPN program
and D-Link Firewall and demonstrate integrations and network solutions to OBUs, and in
addition, to Partners and Customers from D-Link International.

D-Link International 2
Confidential and proprietary
4. List of Equipment and Software
The table below shows the devices information.

Device No. Device Name Device Model Firmware

1 TheGreenBow VPN Client Software - 4.61.003

2 Netdefend IPS Firewall DFL-800 2.26.00.06-12649
3 WinRadius Radius Server - 4.00

5. Network Diagram

Note: Router is set to allow IPSec pass through.

6. Configurations
In this document, we will only describe the main configurations for this Scenario. The
configurations setting for all the D-Link products will not be described here and for more
detail about the product you can download their user guide.

1) TheGreenBow VPN Client (IPSec) and D-Link Security Solutions

(VPN Client Æ DFL-800)

2) TheGreenBow VPN Client (XAuth) and D-Link Security Solutions

(VPN Client Æ DFL-800 Æ Radius Server)

D-Link International 3
Confidential and proprietary
6.1 TheGreenBow VPN Client (IPSec) and D-Link Security Solutions
(VPN Client Æ DFL-800)

In this scenario the user can connect back to the headquarter database by using
TheGreenBow VPN Client connection to DFL-800.

All configurations are based on DFL-800 (F/W: 2.26.00.06-12649) and TheGreenBow

VPN Client (F/W: 4.61.003)

The steps in this configuration are:

• Setup DFL-800 for VPN tunneling
• Setup Pre-shared Key
• Phase 1 and Phase 2 algorithms setup
• Setting up IPSec-Tunnel
• Setup IP Rules

• Setup TheGreenBow VPN Client software

• Setup Phase 1
• Setup Phase 2

D-Link International 4
Confidential and proprietary
6.1.1) Setup DFL-800 for VPN tunneling
6.1.1.1) Setup Pre-Shared Key

1) Login to the DFL-800 and click “Authenticate Objects” and add a

new “Pre-shared Key” and fill in the passphrase and name.

6.1.1.2) Phase 1 and Phase 2 algorithms setup

1) At the “IKE Algorithms”, select the Encryption and Integrity

algorithms for your phase 1 authenticate.

D-Link International 5
Confidential and proprietary
 2) Next is the “IPSec Algorithms”, select the Encryption and
Integrity algorithms for the Phase 2.

6.1.1.3) Setting up IPSec-Tunnel

1) After we finish setting up the algorithms, next we will need to

create the “IPSec-Tunnel” as show below.

D-Link International 6
Confidential and proprietary
2) Next, click on the “Authentication” tab and select the “Pre-
Shared Key” you have setup at the steps 1.

3) After selecting the Pre-Shared Key, next is to enable the

“Dynamically add route” at the routing tab.

4) Last step is to make sure the DH Group at the IKE setting is the
same setting for the TheGreenBow VPN Client software.

D-Link International 7
Confidential and proprietary
6.1.1.4) Setup IP Rules
Now is to setup the IP Rules so there the DFL-800 knows where
to direct all the traffic to.

1) First add a new interface group name “IPSec-LAN” by grouping

up “IPSec-Tunnel” and “LAN”.

2) Next, click “IP Rules” and add a new IP rule as show below.

D-Link International 8
Confidential and proprietary
6.1.2) Setup TheGreenBow VPN Client Software

6.1.2.1) Setup Phase 1

1) Right click on the “Root” to add a new “Phase1”, next fill in the IP
address for this VPN client and Remote gateway IP follow by
Preshared Key and IKE setting.

Note: the Preshared Key and IKE must be the same setting set in the DFL-800.

D-Link International 9
Confidential and proprietary
6.1.2.2) Setup Phase 2

1) Right click on the “Phase1” to add a new “Phase2”, next fill in the
VPN Client address for this VPN client and Remote gateway IP
follow by ESP setting.

Note: the ESP Encryption and Authentication setting must be the same in the
DFL-800 IPSec-Tunnel.

D-Link International 10
Confidential and proprietary
6.2 TheGreenBow VPN Client Software (X-Auth) and D-Link security
solutions (VPN ClientÆDFL-800)

In this scenario the client will be authenticate (X-Auth) before the user can connect back
to the headquarter database by using TheGreenBow VPN Client connection to DFL-800
authenticate by External Authentication (Radius Server).

All configurations are based on DFL-800 (F/W: 2.26.00.06), TheGreenBow VPN Client
(F/W: 4.61.003) and WinRadius (Version 4.00)

Note: Before configuration this solution, please make sure that your DFL-800 and VPN Client had
the IPSec setting configured. Please refer to (6.1 - TheGreenBow VPN Client software (IPSec)
and D-Link Security Solutions (VPN Client Æ DFL-800))

The steps in this configuration are:

• Setup DFL-800 for X-Auth
• Enable the X-Auth in DFL-800
• Setup the External Authentication Server

• Setup TheGreenBow VPN Client software

• Enable the X-Auth Function

• Setup WinRadius Server

• Set the Secret Key

D-Link International 11
Confidential and proprietary
6.2.1) Setup DFL-800 for X-Auth

6.2.1.1) Enable the X-Auth in DFL-800

1) At the “Interfaces Æ IPSec”, select the IPSec tunnel you have

created in the previous solution and at the “XAuth” tab, enable the
function as show below.

6.2.1.2) Setup the External Authentication Server (i.e. Radius)

1) Add the IP Address for the Radius Server in the “Address Book”.

D-Link International 12
Confidential and proprietary
2) Select the “User Authentication Æ External User Database”
and add a new “Radius Server” with the setting as show below.

Note: the Shared Secret must be the same key in the Radius Server.

3) Next, add a New Rule in the “User Authentication Rules”.

D-Link International 13
Confidential and proprietary
4) At the “Authentication Options”, select the Radius Server you
have created and select the Radius Method as “CHAP”.

5) Save and activate the setting.

D-Link International 14
Confidential and proprietary
6.2.2) Setup TheGreenBow VPN Client software

6.2.2.1) Enable the X-Auth Function

1) Inside the “P1 Advanced” menu, tick the box for the “X-Auth
Popup”.

2) Click “Ok” and “Save &Apply” the setting.

D-Link International 15
Confidential and proprietary
6.2.3) Setup WinRadius Server

6.2.3.1) Set the Secret Key

1) Click the “System” from the “Setting” drop down list

2) Key in the “NAS Secret”.

Note: The NAS Secret must be the same key set in the DFL-800 “Shared
Key”.

3) Click “OK”, close and start the WinRadius Server again.

D-Link International 16
Confidential and proprietary
7. Interoperability Compliance Testing

7.1) General Test Approach

a. Open the VPN tunnel using different Negotiate Mode in phase 1 and
phase 2:

Series Negotiate Mode

Phase 1 Phase 2
AES-SHA AES-SHA
AES-MD5 AES-SHA
3DES-MD5 AES-SHA
3DES-SHA AES-SHA
DES-MD5 AES-SHA
DES-SHA AES-SHA
AES-SHA AES-MD5
AES-MD5 AES-MD5
3DES-MD5 AES-MD5
3DES-SHA AES-MD5
DES-MD5 AES-MD5
DES-SHA AES-MD5
AES-SHA 3DES-SHA
AES-MD5 3DES-SHA
3DES-MD5 3DES-SHA
3DES-SHA 3DES-SHA
DES-MD5 3DES-SHA
DES-SHA 3DES-SHA
AES-SHA 3DES-MD5
AES-MD5 3DES-MD5
3DES-MD5 3DES-MD5
3DES-SHA 3DES-MD5
DES-MD5 3DES-MD5
DES-SHA 3DES-MD5
AES-SHA DES-SHA
AES-MD5 DES-SHA
3DES-MD5 DES-SHA
3DES-SHA DES-SHA

D-Link International 17
Confidential and proprietary
 Series Negotiate Mode
Phase 1 Phase 2
DES-MD5 DES-SHA
DES-SHA DES-SHA
AES-SHA DES-MD5
AES-MD5 DES-MD5
3DES-MD5 DES-MD5
3DES-SHA DES-MD5
DES-MD5 DES-MD5
DES-SHA DES-MD5

b. Create users in the WinRadius and during the X-Auth popup, key
in the users ID and Password from the WinRadius.

D-Link International 18
Confidential and proprietary
7.2) Test Result

a. The VPN tunnel will be open at any negotiate mode set in Phase 1
and Phase 2.

TheGreenBow VPN Client software

D-Link International 19
Confidential and proprietary
b. The DFL-800 will show the tunnel is up at their VPN status.

DFL-800 IPSec

b. Client is able to Ping to the remote network.

D-Link International 20
Confidential and proprietary
e. For the “X-Auth”, when the valid users are enter in the X-Auth
popup. The Radius Server will show “Users Authentication OK”
and open up the VPN tunnel.

TheGreenBow VPN Client software

D-Link International 21
Confidential and proprietary
8. Conclusion
The Application Notes demonstrate how D-Link VPN products and TheGreenBow VPN
software combined perfectly address the requirements of the small and medium
businesses worldwide. The joint VPN solution offer advantages around multiple access
control and authorization mechanisms for users and tunneling capabilities to access the
entire corporate network; it can also provide different access rights to different users.

D-Link International 22
Confidential and proprietary
D-Link Inc. All Rights Reserved
D-Link is the worldwide leader and an award-winning designer, developer, and
manufacturer of Wi-Fi and Ethernet networking, broadband, multimedia, voice and data
communications and digital electronics solutions.

D-Link International 23
Confidential and proprietary