Scribd
Upload
63 views

Fastenal Product Standard: FNL - FHN.GRA.Z: Finished Hex Nuts, Grade A, Zinc Plated

This document provides specifications for zinc plated hex nuts in various nominal sizes from 1/4" to 3". It lists the required dimensional characteristics for width across flats, width across corners, and thickness. It also specifies the material and mechanical properties, including grade A per ASTM A563 for nuts up to 1 1/2" and hardness testing only for larger sizes, as well as thread requirements of ANSI B1.1 UNC & UNF Class 2B. The finish is specified as Fe/Zn 3AT per ASTM F1941. Adherence to all referenced consensus standards is required.

Uploaded by

Joann Du
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
63 views

Fastenal Product Standard: FNL - FHN.GRA.Z: Finished Hex Nuts, Grade A, Zinc Plated

This document provides specifications for zinc plated hex nuts in various nominal sizes from 1/4" to 3". It lists the required dimensional characteristics for width across flats, width across corners, and thickness. It also specifies the material and mechanical properties, including grade A per ASTM A563 for nuts up to 1 1/2" and hardness testing only for larger sizes, as well as thread requirements of ANSI B1.1 UNC & UNF Class 2B. The finish is specified as Fe/Zn 3AT per ASTM F1941. Adherence to all referenced consensus standards is required.

Uploaded by

Joann Du
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Fastenal Product Standard: FNL.FHN.GRA.

Z
Finished Hex Nuts, Grade A, Zinc Plated
The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If
the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your
status as an approved vendor. Unless otherwise specified, all referenced consensus standards must be adhered to in their entirety.

Nominal Size
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
1 3/4
1 7/8
2
2 1/4
2 1/2
2 3/4
3

F
Width Across Flats
Max.
Min.
.438
.428
.500
.489
.563
.551
.688
.675
.750
.736
.875
.861
.938
.922
1.125
1.088
1.312
1.269
1.500
1.450
1.688
1.631
1.875
1.812
2.062
1.994
2.250
2.175
2.43
2.35
2.625
2.538
2.813
2.722
3.000
2.900
3.375
3.263
3.750
3.625
4.125
3.988
4.5
4.350

G
Width Across Corners
Max.
Min.
.505
.488
.577
.557
.650
.628
.794
.768
.866
.840
1.010
.982
1.083
1.051
1.299
1.240
1.516
1.447
1.732
1.653
1.949
1.859
2.165
2.066
2.382
2.273
2.598
2.480
2.805
2.679
3.031
2.893
3.247
3.103
3.464
3.306
3.897
3.719
4.330
4.133
4.763
4.546
5.196
4.959

H
Thickness
Max.
Min.
.226
.212
.273
.258
.337
.320
.385
.365
.448
.427
.496
.473
.559
.535
.665
.617
.776
.724
.887
.831
.999
.939
1.094
1.030
1.206
1.138
1.317
1.245
1.416
1.364
1.540
1.460
1.651
1.567
1.763
1.675
1.986
1.890
2.209
2.105
2.431
2.319
2.654
2.534

Specification Requirements:

Dimensions:

Material &
Mechanical Properties:

Thread requirements:
Finish:

Page 1 of 1

ASME B18.2.2 for thru 1


Over 1 see dimensions above and FIM limits to the ASME B18.2.2
Heavy Hex Nut Standard
Grade A per ASTM A563 for to 1 .
For sizes over 1 , hardness test only to HRB-68 to HRC-32
ANSI B1.1 UNC & UNF Class 2B
Fe/Zn 3AT Per ASTM F1941

June 1, 2009

This document was printed on 6/1/2009 and was current at that time. Please check current revision date to avoid using obsolete copies.

You might also like