API 620

DATA SHEET: ATMOSPHERICAL TANK API 620 - FT BY FT METH. 1-Fluid: Product: Cp (cal/gr C) Vapor Pressure @ 200 F, psia SG Viscosity @ 130 F (centistokes) PM Water 0.238 11.53 1 0.55 18 60.13

r @ 200 F (lbm/pie3)
2-Tank Size: Nominal Diameter Nominal Heigth Lquido Heigth Nominal Capacity 3-Tuberias asociadas al Tanque: Nozzle N1 N2 N3 N6 N4 N5 N8 N7 N9 A/B N10

35 ft (10,7 meters) 40 ft (12,2 meters) 39 ft (11,9 meters) 1000 cubic meters

Service Water inlet Service Water Oulet fire fighting Water Oulet Fire Fighting water recirculation inlet Venting Manhole Rebose Drenaje Stand Pipe Low Level Sw TOTALS =

Cant 1 1 1 1 1 2 1 1 2 1

4-Datos de Operacion: Desgin Temperature, T1 Desging Pressure (ft Water Column) Atmospherical Pressure (Psia) Altitude (m.s.n.m.) Inlet Pressure at N1 (Psig) Inlet Flow at N1 (GPM) Maximul Allowed Velocity at N1 (m/seg) 5-Nozzles and Conections: Nozzle N1 N2 N3 N6 N4 N5 N8 N7 N9 A/B N10

200F (93 C) 492 14.7 350

Service Water inlet Service Water Oulet fire fighting Water Oulet Fire Fighting water recirculation inlet Venting Manhole Overflow Nozzle Drainage Nozzle Stand Pipe Low Level Sw

Cant 1 1 1 1 1 2 1 1 2 1

TOTAL =

Original File: NewFile: Original Date: New Date: Original Autor: Traslation:

Archivo: Mdulo 14.xls

7/30/2004 4/7/2008
LRRJ

[email protected]

Diameter (inch) 8 4 16 8 12 24 10 4 2 2

Schedule 40 40 40 40 40 40 40

Length (m)

Weigh (lb)

Weigh (kg)

Material

0.00

0.00

Diameter (inch) 8 4 16 8 12 24 10 4 2 2

Weigh (lb) 48.50 20.00 173.00 48.50 100.00 662.00 70.00 20.00 15.00 7.50

Weigh (kg) 31.75 9.07 78.47 22.00 45.35 300.27 31.75 9.07 6.80 3.40

Material A-105 A-105 A-105 A-105 A-105 A-105 A-105 A-105 A-105 A-105

1164.50

537.93

API 620
Write input Data Only on not colored cells
Module 14 CALCULATIONS ATMOSPHERICAL TANK CALCULATOR ACCORDING WITH API 650 - FT BY FT METHOD INLETS GENERAL DATA Design Pressure ftwc= Height of the tank (full of water) + 12 ftwc (ft of water column) Design Temperature, C Diameter of the Tank, feet Height of the Tank (Calculations Limits = 80 ft), feet specific Gravity of the Stored Fluid (Water=1) Allowable Working stress at Designs conditions, Psi Corrosion thickness, inch Angle of Inclination of the Roof with regard to the horizontal one, degrees Capacity needed of the Tank, cubic meters STANDARD SHEET Length of the sheet, feet Width of the sheet, feet Area of Standard Sheet, m2 Density of the Sheet of Steel, Kg/m3 OUTPUTS THICKNESS WALLS SHEET Number of Rings with Standard Sheets Area of A Ring, m2 Number of Sheets Needed by ring Minimum Thickness of sheet in Ring 1, mm Thickness of Sheet I Ring 1 Nominal, mm Minimum Thickness of sheet in Ring 2, mm Thickness of Sheet on Ring 2 Nominal, mm Minimum Thickness of sheet in Ring 3, mm Thickness of Sheet on Ring 3 Nominal, mm Minimum Thickness of sheet in Ring 4, mm Thickness of Sheet on Ring 4 Nominal, mm Minimum Thickness of sheet in Ring 5, mm Thickness of Sheet on Ring 5 Nominal, mm Minimum Thickness of sheet in Ring 6, mm Thickness of Sheet on Ring 6 Nominal, mm Minimum Thickness of sheet in Ring 7, mm Thickness of Sheet on Ring 7 Nominal, mm Minimum Thickness of sheet in Ring 8, mm Thickness of Sheet on Ring 8 Nominal, mm Minimum Thickness of sheet in Ring 9, mm Thickness of Sheet on Ring 9 Nominal, mm Minimum Thickness of sheet in Ring 10, mm Thickness of Sheet on Ring 10 Nominal, mm Volume of Tanks Body , m3 Weight of Tanks Body, Kg

Pd Td D H G Sd C.A. q CAPt LENGTH WIDTH AREA STD S: DENSITY

396.00 93.00 60.00 32.00 1.00 23,200.00 0.0625 25.00

20.00 8.00 14.86 7,901.42

Rings= Aa= NLanillo= TWALL-A1 = TWALL-A1n = TWALL-A2 = TWALL-A2n = TWALL-A3 = TWALL-A3n = TWALL-A4 = TWALL-A4n = TWALL-A5 = TWALL-A5n = TWALL-A6 = TWALL-A6n = TWALL-A7 = TWALL-A7n = TWALL-A8 = TWALL-A8n = TWALL-A9 = TWALL-A9n = TWALL-A10 = TWALL-A10n = Vct= Pct=

4 140.09 10 6.8821 5.00 5.5157 4.00 4.1494 4.00 2.7831 4.00 N/A 0.00 N/A 0.00 N/A 0.00 N/A 0.00 N/A 0.00 N/A 0.00 2.53 19,965.94

NLtecho= Ttecho = Ttecho n = Vtt= Ptt= NLpiso= Tpiso= Tpiso n = Vpt= Ppt= Volumen=

Thicknesses: Sheets of Conical Roof Number of Sheets Needed for the Roof minimal needed Thickness of Roof's sheet, INCHES minimal needed Thickness of Roof's sheet, mm Nominal Thickness of Roof's sheet, mm Volume of the Roof of the Tank, m3 Weight of the Roof of the Tank, Kg Thicknesses: Sheets of Floor Number of Sheets Needed for the Floor minimal needed Thickness of Floor's sheets, INCHES minimal needed Thickness of Floor's sheets, mm Nominal Thickness of Floor's sheets, mm Volume of the Floor of the Tank, m3 Total Weight of the Floor of the Tank, Kg: Total volume of Stored Water, m3 Ft3 gallons Barrels (U.S. Liquid) Total Weight of the Empty Tank, Kilograms Total Weigh of the Tank Full of Water, Kilograms Nominal Tanks Capacity (Barrels): Nominal Tanks Capacity (Gallons): Nominal Tanks Capacity (Liters): Nominal Tanks Capacity (Mts3): Percent of Volume of Air in the Tank(%): Net Tanks Capacity (Barrels): Net Tanks Capacity (Gallons): Net Tanks Capacity (Liters): Net Tanks Capacity (Mts3):

18.00 0.35 9.02 6.35 1.70 13,424.16 18.00 0.31 7.94 10.00 2.68 21,140.41 2,562.34 90,476.20 676,970.02 21,491.11 54,530.51 2,616,869.73 16,117.17 676,921.19 2,562,146.71 2,562.15 2.50 15,714.24 659,998.16 2,498,093.04 2,498.09

Peso Total=

Archivo: Mdulo 14.xls

Fecha

7/30/2004

HOJA DE DATOS PARA TANQUE ATMOSFRICO - API 650 - METODO PIE POR PIE 1-Fluido: Nombre: Cp (calora/gramo C) Presin de Vapor @ 200 F, psia SG Viscosidad @ 130 F (centistokes) PM Agua 0.238 11.53 1 0.55 18 60.13

r @ 200 F (lbm/pie3)
2-Dimensiones del Tanque: Dimetro Nominal Altura Nominal Altura del Lquido Capacidad Nominal 3-Tuberias asociadas al Tanque: Boquilla N1 N2 N3 N6 N4 N5 N8 N7 N9 A/B N10

35 pies (10,7 metros) 40 pies (12,2 metros) 39 pies (11,9 metros) 1000 metros cbicos

Servicio Cantidad Entrada de Agua 1 Salida de Agua de Agua Servicio 1 Salida Agua Contra Incendio 1 Entrada Recirculacin Agua Contra Incendio1 Respiradero 1 Manhole 2 Rebose 1 Drenaje 1 Stand Pipe 2 Interruptor Bajo Nivel 1 TOTALES =

Dimetro (pulg) 8 4 16 8 12 24 10 4 2 2

4-Datos de Operacion: Temperatura de Diseo, T1 Presin de Diseo (Pies de Columna de Agua) Presin Atmosfrica (Psia) Altitud (m.s.n.m.) Presin Entrada a N1 (Psig) Caudal de Entrada a N1 (GPM) Velocidad de permisible de Aduccin en N1 (m/seg) 5-Boquillas y Conexiones: Boquilla N1 N2 N3 N6 N4 N5 N8 N7 N9 A/B N10

200F (93 C) 492 14.7 350

Servicio Cantidad Entrada de Agua 1 Salida de Agua de Agua Servicio 1 Salida Agua Contra Incendio 1 Entrada Recirculacin Agua Contra Incendio1 Respiradero 1 Manhole 2 Rebose 1 Drenaje 1 Stand Pipe 2 Interruptor Bajo Nivel 1 TOTALES =

Dimetro (pulg) 8 4 16 8 12 24 10 4 2 2

Schedule 40 40 40 40 40 40 40

Longitud (m)

Peso (lb)

Peso (kg)

Material

0.00

0.00

Peso (lb) 48.50 20.00 173.00 48.50 100.00 662.00 70.00 20.00 15.00 7.50 1164.50

Peso (kg) 31.75 9.07 78.47 22.00 45.35 300.27 31.75 9.07 6.80 3.40 537.93

Material A-105 A-105 A-105 A-105 A-105 A-105 A-105 A-105 A-105 A-105

Solo ingresar datos en las celdas NO sombreadas

Mdulo 14 CLCULO CLCULO DE TANQUES ATMOSFRICOS SEGN API 650 - METODO PIE POR PIE ENTRADAS DATOS GENERALES Presin de Diseo en pca=Altura del tanque (lleno de agua) + 12 pca Temperatura de Diseo, C Dimetro del Tanque, pies Altura del Tanque (Lmite de Clculo = 80 ft), pies Gravedad especfica del Fluido Almacenado (Agua=1) Esfuerzo admisible para la Condicin de Diseo, Psi Espesor de Corrosin, pulg Angulo de Inclinacin del Techo respecto a la horizontal, grados Capacidad requerida del Tanque, metros cbicos LMINAS ESTNDAR Largo de la lmina, pies Ancho de la lmina, pies Area de Lmina Estndar, m2 Densidad de la Lmina de Acero, Kg/m3 SALIDAS Espesores: Lminas de Pared Nmero de Anillos con Lminas Estndar rea de Un Anillo, m2 Nmero de Lminas Requeridas por anillo Espesor mnimo de lmina en Anillo 1, mm Espesor de Lmina Anillo 1 Nominal, mm Espesor mnimo de lmina en Anillo 2, mm Espesor de Lmina Anillo 2 Nominal, mm Espesor mnimo de lmina en Anillo 3, mm Espesor de Lmina Anillo 3 Nominal, mm Espesor mnimo de lmina en Anillo 4, mm Espesor de Lmina Anillo 4 Nominal, mm Espesor mnimo de lmina en Anillo 5, mm Espesor de Lmina Anillo 5 Nominal, mm Espesor mnimo de lmina en Anillo 6, mm Espesor de Lmina Anillo 6 Nominal, mm Espesor mnimo de lmina en Anillo 7, mm Espesor de Lmina Anillo 7 Nominal, mm Espesor mnimo de lmina en Anillo 8, mm Espesor de Lmina Anillo 8 Nominal, mm Espesor mnimo de lmina en Anillo 9, mm Espesor de Lmina Anillo 9 Nominal, mm Espesor mnimo de lmina en Anillo 10, mm Espesor de Lmina Anillo 10 Nominal, mm Volumen del Cuerpo del Tanque, m3 Peso del Cuerpo del Tanque, Kg

Pd Td D H G Sd C.A. q CAPt LARGO ANCHO AreaLE DENSIDAD

396.00 93.00 60.00 32.00 1.00 23,200.00 0.0625 25.00

20.00 8.00 14.86 7,901.42

Anillos= Aa= NLanillo= Tpared-A1 = Tpared-A1n = Tpared-A2 = Tpared-A2n = Tpared-A3 = Tpared-A3n = Tpared-A4 = Tpared-A4n = Tpared-A5 = Tpared-A5n = Tpared-A6 = Tpared-A6n = Tpared-A7 = Tpared-A7n = Tpared-A8 = Tpared-A8n = Tpared-A9 = Tpared-A9n = Tpared-A10 = Tpared-A10n = Vct= Pct=

4 140.09 10 6.8821 5.00 5.5157 4.00 4.1494 4.00 2.7831 4.00 N/A 0.00 N/A 0.00 N/A 0.00 N/A 0.00 N/A 0.00 N/A 0.00 2.53 19,965.94

NLtecho= Ttecho = Ttecho n = Vtt= Ptt= NLpiso= Tpiso= Tpiso n = Vpt= Ppt= Volumen=

Espesores: Lminas de Techo Cnico Nmero de Lminas Requeridas para el Techo Espesor mnimo de lmina de Techo requerido, PULGADAS Espesor mnimo de lmina de Techo requerido, mm Espesor de Lmina Techo Nominal, mm Volumen del Techo del Tanque, m3 Peso del Techo del Tanque, Kg Espesores: Lminas de Piso Nmero de Lminas Requeridas para el Piso Espesor mnimo de lmina de Piso requerido, PULGADAS Espesor mnimo de lmina de Piso requerido, mm Espesor de Lmina de Piso Nominal, mm Volumen del Piso del Tanque, m3 Peso del Piso del Tanque, Kg Totales: Volumen Total de Agua Almacenada, m3 En pie3 En galones En barriles (U.S. Liquid) Peso Total del Tanque Vaco, Kilogramos Peso Total del Tanque Lleno de Agua, Kilogramos Capacidad Nominal del Tanque (Barriles): Capacidad Nominal del Tanque (Galones): Capacidad Nominal del Tanque (Litros): Capacidad Nominal del Tanque (Mts3): Volumen de Aire en el Tanque (%): Capacidad Neta del Tanque (Barriles): Capacidad Neta del Tanque (Galones): Capacidad Neta del Tanque (Litros): Capacidad Neta del Tanque (Mts3):

18.00 0.35 9.02 6.35 1.70 13,424.16 18.00 0.31 7.94 10.00 2.68 21,140.41 2,562.34 90,476.20 676,970.02 21,491.11 54,530.51 2,616,869.73 16,117.17 676,921.19 2,562,146.71 2,562.15 2.50 15,714.24 659,998.16 2,498,093.04 2,498.09

Peso Total=