Scribd
Upload
53 views2 pages

38 GHZ TX Attenuator: Features

The 38 GHz TX Attenuator provides attenuation for transmit signals from NEC digital microwave radios while introducing minimal loss to received signals. It comprises a directional attenuator, antenna and radio interfaces, and polarizer. Transmit signals are attenuated by over 30 dB while receive signals experience less than 2 dB of loss. The attenuation is frequency flat regardless of power level, allowing interference-free operation near other systems without lowering receive levels. The attenuator is suited for Andrew or RFS antennas and NEC outdoor units in the 38 GHz band, making it useful in areas with strict emission regulations.

Uploaded by

ms_alethea
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views2 pages

38 GHZ TX Attenuator: Features

The 38 GHz TX Attenuator provides attenuation for transmit signals from NEC digital microwave radios while introducing minimal loss to received signals. It comprises a directional attenuator, antenna and radio interfaces, and polarizer. Transmit signals are attenuated by over 30 dB while receive signals experience less than 2 dB of loss. The attenuation is frequency flat regardless of power level, allowing interference-free operation near other systems without lowering receive levels. The attenuator is suited for Andrew or RFS antennas and NEC outdoor units in the 38 GHz band, making it useful in areas with strict emission regulations.

Uploaded by

ms_alethea
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

38 GHz TX Attenuator

NEC has developed 38GHz TX Attenuator for PASOLINK Series digital microwave radio point-to-point fixed wireless systems. The TX Attenuator comprises directional attenuator, antenna interface, radio mounting interface and polarizer to provide attenuation only for the TX signal. The RX signal power received by the single polarized antenna is sent to outdoor unit (ODU) through the TX Attenuator with less than 2dB loss. On the other hand, the TX signal power transmitted from ODU is sent to antenna through the TX Attenuator with more than 30dB attenuation. The frequency flatness of the attenuation is realized regardless of its power level. The function of the TX Attenuator as mentioned above provides no interference to the adjacent systems without RX level down. Thus TX Attenuator is very useful in the region where EIRP regulation is strict. NEC 38 GHz TX Attenuator is suited for Andrew or RFS Antenna and NEC ODU for 38 GHz Band.

38 GHz TX Attenuator

FEATURES
Direct mount integration with smart design for PASOLINK Series Easy Installation Conforms to EIRP regulation Interference-free to adjacent systems

MTL-AG-011

SPECIFICATIONS

Frequency Range [GHz] Code No. VSWR Max. RX Insertion Loss Max. [dB] TX Attenuation [dB] Handling Power Max. [dBm] Interface

37.039.5 G9791A 1.3 2.0 32.0 to 36.0 20 ANTAndrew/RFS ODUNEC(Direct Mount)

PHYSICAL DIMENSIONS
Dimensions: Weight: 259.3(H)(exclude handle) x 135(W) x 278.8(D) mm 4 kg

Note: This document only describes prominent features of the product(s). NEC reserves the right to change specifications without notice and without obligations to notify to any person of such change.

2003 NEC Corporation

MTL-AG-011 150301

You might also like