Scribd
Upload
2K views

CHB Wall Basics

The document provides parameters and estimating factors for quantifying materials needed for wall construction. It lists dimensions like wall height and floor levels. It calculates the gross wall area, deducts structural elements and openings to get the net area. Estimating factors are provided for materials like concrete hollow blocks, rebar, cement, sand needed per unit area of wall. Sample walls are analyzed by applying the estimating system to calculate materials required.

Uploaded by

Girard Kenneth Mangente
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
2K views

CHB Wall Basics

The document provides parameters and estimating factors for quantifying materials needed for wall construction. It lists dimensions like wall height and floor levels. It calculates the gross wall area, deducts structural elements and openings to get the net area. Estimating factors are provided for materials like concrete hollow blocks, rebar, cement, sand needed per unit area of wall. Sample walls are analyzed by applying the estimating system to calculate materials required.

Uploaded by

Girard Kenneth Mangente
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 5

PARAMETERS (Documentation of the quantity survey/data base) HEIGHT OF WALL FROM TOP OF WF TO Natural Ground Line (NGL) FROM

NGL TO BOTTOM OF BEAM STANDARD CONSTRUCTION DRAWING REFERENCES Gradeline to Ground Floor FINISHED FLOOR LINE (FFL) FFL to TOP OF BEAM (e.g., Roof Beam, 2nd Flr. Beam) FFL to Ceiling Line

"Below Ground" "Above Ground"

ESTIMATING THE GROSS AND NET AREAS OF WALLS Total Area of Wall LESS (Area of Structural Elements PLUS Area of Wall Openings) Structural Elements: Main Columns and Stiffener Columns Main Beams and Lintel Beams Wall openings

Stiffener columns - used when Main Column spans are Lintel Beams - used above wall openings Windows, doors, vents and the like

Main Column spans are very wide

NET AREA Deductible Areas Area of Strucl Elements Column width from C.L. 0.15 X # of Col 2 0.3 height WF-NGL NGL-ToB

0.60 3.85 4.45 1.335

Ar of Col Roof Beam Depth Net Span Gross Span Less: Column

0.4 5 0.3 4.7 1.88

Ar of Beam Openings Window Width Height

2.4 1.2 2.88

Gross Area Width Height Below Grd Above Grd Area Net Area =

5 0.6 3.85 4.45 22.25 16.155

For Practice Only Wall Net Area W-2 17.37 W-3 30

Estimating Factors (from book by Fajardo) 12.5 pcs 0.2X0.4 chb per square meter 12 bags cement per cubic meter of Class B mortar 12.5 pcs of chb at 0.003 Cu. M. per 4" block 12.5 pcs of chb at 0.006 Cu. M. per 6" block 1 Cu. M. sand per cubic of Class B mortar

0.0375 0.45 0.075 0.9

Cu. M per square meter bags of cement per square meter Cu. M per square meter bags of cement per square meter

0.0375 cubic meter sand per square meter Estimating Factors (from class derivation) 2 lineal meters re-bar per square meter WALL Net Area 6" CHB 4" CHB Wall - 1 16.155 202

10 MM DSB

0.333333 length of DSB per square meter #16 GIW CEM SAND GRAVEL 6 15 1

Application of estimating system W-2 17.37 218 W-3 30 375

6 10

16 27

1 2

ASSIGNMENT 1 Add data to estimate cement plaster finish; use formulas from book. 2 Create a new sheet to estimate the painting requirements. Use the supplied PDF file Interior wall - Specification is Megacryl Paint Exterior wall - Specification is Liquid Tile Paint

uare meter

quare meter

You might also like