Scribd
Upload
30 views

Advantech - USB Installation Guide

The document provides installation instructions for Advantech USB Data Acquisition Series devices. It describes how to attach the lockable USB cable, DIN-rail bracket, optional wallmount bracket, and optional VESA bracket. Instructions are also given for removing the casing to access internal jumpers.

Uploaded by

Hadi Barak
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

Advantech - USB Installation Guide

The document provides installation instructions for Advantech USB Data Acquisition Series devices. It describes how to attach the lockable USB cable, DIN-rail bracket, optional wallmount bracket, and optional VESA bracket. Instructions are also given for removing the casing to access internal jumpers.

Uploaded by

Hadi Barak
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

USB Installation Guide

Advantech USB Data Acquisition (DAQ) Series Installation Guide


The unique design of Advantechs USB Data Acquisition (DAQ) Series can fulfill demands on secure connections between USB cables and the devices, as well as allow modules to be used with a variety of alternate mounting solutions. The following information will provide the necessary information and guide you through the basic operations of these kits.

Attaching the Lockable USB Cable


Advantech USB DAQ series feature the lockable cable design to secure the device connection. To prevent the USB cable from being unplugged accidentally, please insert the cable into the module, and screw in the two fasteners as shown below.

Dimensions

Attaching the DIN-rail Bracket


Advantechs USB DAQ modules come with a bracket that facilitates the industry standard DIN-rail mounting. To attach, simply place the bracket firmly on the back, and secure it by attaching the two screws into the holes as shown below.

(Device) *Note: Every Advantech's USB data acquisition/hub module comes with a DIN-rail kit, except USB-4702.

Attaching the Wallmount Bracket (Optional)


The wallmount kit can help you hang your modules on the wall or other flat surfaces. To attach the wallmount bracket, remove all 4 rubber pads on the rear of the module, and secure it by attaching the two screws into the holes as shown below.

(Screw Terminal)

Removing the Casing


You may need to remove the modules outer casing to access the jumpers inside the module. To remove the casing, you'll have to first remove the rubber padding covering the screws, and then remove the two screws holding the casing in place, as shown below.

Wallmount kit part number: 1960004544

Attaching a VESA Bracket (Optional)


Use the VESA bracket to mount your module to the VESA-ready appliances, such as Advantechs TPC series. To attach, remove all 4 rubber pads on the back, and secure it by attaching the two screws into the holes as shown below.

VESA bracket part number: 1960005788

Industrial USB I/O Modules

You might also like