Scribd
Upload
210 views

18 SS Physical Properties PDF

The document provides physical property data for various types of stainless steel and mild steel, including density, modulus of elasticity, specific heat capacity, thermal conductivity, coefficient of thermal expansion, resistivity, recommended maximum service temperatures, and relative magnetic permeability. The properties are presented in a table with the steel grades listed along the left and the properties in the top row.

Uploaded by

sekharsappa
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
210 views

18 SS Physical Properties PDF

The document provides physical property data for various types of stainless steel and mild steel, including density, modulus of elasticity, specific heat capacity, thermal conductivity, coefficient of thermal expansion, resistivity, recommended maximum service temperatures, and relative magnetic permeability. The properties are presented in a table with the steel grades listed along the left and the properties in the top row.

Uploaded by

sekharsappa
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

STAINLESS STEEL

National Distributors of Stainless Steel and Aluminium

PHYSICAL PROPERTIES
Other physical properties of corrosion resistant steel, stainless steel and mild steel Over and above the usual mechanical properties of tensile streets, proof streets and elongation other ancillary properties of stainless steel are often required. Note : the values given below are typical. Stainless steels within the same classification (e.g. Austenitic stainless steels) will have similar values, but even slight variations of chemical composition within the specification limits of the same steels will affect the actual value. Reported values are often slightly different, depending on the reference. Many of these properties are temperature dependant. The values given below should not be used as guaranteed or minimum values.
Property and units Density: kg/m3 Modulus of elasticity Gpa Tension Torsion Specific heat capacity at 100 C Thermal conductivity W/m C J/kg C at 100 C at 300 C at 500 C Mean Co-efficient of Thermal Expansion m/m C 0 -100 C 0 -300 C 0 -500 C Resistivity m at 100 C Recommended maximum Service (Oxidising Conditions) Endurance Limit MPa Relative Magnetic Permeability Continuous Intermittent Mild steel 7870 200 65 455 73 70 65 12.5 13.0 13.8 0.16 500 C 600 C 200

304 7900 195 85 415 15.7 17.4 21.2 17.0 17.75 18.5 0.73 925 C 850 C 241

310 7900 205 70 452 13.4 15.2 18.9 15.5 16.5 17.25 0.89 1150 C 1035 C 217 1.02

316 8000 195 70 480 14.5 16.4 20.0 16.5 17.5 18.25 0.75 925 C 870 C 269 1.02

321 7900 195 72 503 15.7 21.2 17.0 17.8 18.25 0.75 950 C 870 C 262 1.02

400 7700 200 77 460 23 25 11.1 11.7 12.3 0.61 620 C 730 C

430 7800 200 65 460 21 23 24 10.4 11.0 11.3 0.60 750 C 850 C 276
600

3CR12 7700 207 77 460 30 40 11.1 11.7 12.3 0.57 600 C 700 C _
200

/3800

1.02

/1100

/1000

2006 Euro Steel. All rights reserved.

You might also like