Scribd
Upload
77 views

Mark Pro - XP Driver Install

This document provides instructions for installing a device driver on Windows XP that allows the computer to recognize a Mark Pro series USB audio device by name rather than the generic label. It involves downloading the driver file from the manufacturer's website, connecting the Mark Pro to the computer, and manually updating the driver via the device manager to replace the generic driver with the Mark Pro specific one. Once complete, the Mark Pro will be labeled by its name in the device manager and any audio software.

Uploaded by

Monroy Eli
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
77 views

Mark Pro - XP Driver Install

This document provides instructions for installing a device driver on Windows XP that allows the computer to recognize a Mark Pro series USB audio device by name rather than the generic label. It involves downloading the driver file from the manufacturer's website, connecting the Mark Pro to the computer, and manually updating the driver via the device manager to replace the generic driver with the Mark Pro specific one. Once complete, the Mark Pro will be labeled by its name in the device manager and any audio software.

Uploaded by

Monroy Eli
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Mark Pro Series

XP Device Installer
This XP device installer is optional and is offered merely as a naming convenience. With this install, your XP will display your Mark Pro as a USB device by name (i.e. Mark Pro XXX) rather than the generic USB Audio Device label that XP defaults to.

Note: Windows Vista and Mac OSX do NOT use a driver/device installer.

What you will need: 1)AnyPC,WindowsXPinstalled.(RecommendServicePack2) 2)WorkingMARK PROunit. 3)TypeAtoB,USBcable. 4)Gotoourdownloadpagebelow and locate your Mark Pro model: http://www.kurzweilmusicsystems.com/Downloads.php 5) Click Device Installer and download the MARK PROSeries.inf file.

How to install: 1)Note whereMARK PROSeries.inffilelocated on your computer (step 5 above). 2)Powerupthe MARK PRO. 3)Once the Mark Pro is completed booting, connect the USBcablebetweenyour PCandthe MARK PRO. 4)Shortlyafter,youmay heara dingsound, and in the system tray the: Found New Hardware popup opens. 5)Following,youmay seeanotherpopup indicating Found New Hardware. 6)Afterenumerationwiththe host has finished,the followingmessage is displayed: Found New Hardware Your new hardware is installed and ready for use.

(cont.)

7)In theDeviceManager,the Mark Pro is now shown connected as: USB Audio Device. 8)Toinstallthe Mark Pro device driver, in lieu of the generic USB Audio Device, select the USB Audio Device file and right-click on your mouse. Select Update Driver from the popup menu. 9) Next, in the dialog which appears, select Install a list of specific location (Advanced) and click Next. 10) In the subsequent dialog, select Dont search, I will choose driver to install and click Next. 11) Click Have Disk... button. 12) Next press Browse button. 13) Browse to where the MARK PROSeries.inf file is located and press the Open button. 14) On the next screen, press OK. 15) Now select MARK PROSeries.inf and press the Next button. 16) A warning window will appear because this driver is not signed by Microsoft. Click YES to ignore it. 17) You may see the warning box again, press the Continue Anyway button. 18) A dialog will appear indicating a driver install is in progress. 19) When finished, a final dialog will appear confirming the installation. Press the Finish button. 20) Now, in the device manager, you will see the new device name MARK PROSeries displayed. From this point, you will now see the new device name used as reference in any chosen sequencer software. -end-

You might also like