Scribd
Upload
4K views2 pages

Nokia BSC Command's

This document contains 59 commands used to manage various aspects of a cellular network system. The commands check alarms, status of equipment, traffic information, and allow locking/unlocking of different components. Examples include commands to check alarms on specific equipment, change equipment states, check link status and parameters, and reset portions of the network.

Uploaded by

Rao Dheeru
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
4K views2 pages

Nokia BSC Command's

This document contains 59 commands used to manage various aspects of a cellular network system. The commands check alarms, status of equipment, traffic information, and allow locking/unlocking of different components. Examples include commands to check alarms on specific equipment, change equipment states, check link status and parameters, and reset portions of the network.

Uploaded by

Rao Dheeru
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

=

MAIN LEVEL ? ..... A ..... C ..... D ..... E ..... F ..... I ..... N ..... O ..... Q ..... R ..... T ..... U ..... W ..... Y ..... Z; .... DISPLAY MENU ALARM SYSTEM ADMINISTRATION ROUTING STATE ADMINISTRATION SYSTEM SUPPORT AND COMMUNICATION CELLULAR RADIO NETWORK ADMINISTRATION FRAME RELAY ADMINISTRATION I/O SYSTEM ADMINISTRATION SS7 NETWORK ADMINISTRATION SUPPLEMENTARY SS7 NETWORK ADMINISTRATION O&M NETWORK ADMINISTRATION ROUTING ADMINISTRATION TRAFFIC ADMINISTRATION UNIT ADMINISTRATION SYSTEM CONFIGURATION ADMINISTRATION SYSTEM SUPERVISION END DIALOGUE/DESTINATION SELECTION (:)

1. ZEEI:BCF=<BCFNO>; TELL ABOUT NO. OF CALLS IN EACH SECTOR. 2. ZEEL:BL; GIVE INFORMATION ABOUT BLOCK TRX IN EACH SECTOR. 3. ZEOL:<BCFNO.>; GIVE INFORMATION ABOUT PRSENT ALARMS. 4. ZERS:BTS=<NO.>,TRX=<NO.>:L OR U:; TO LOCK OR UNLOCK TRX. 5. ZEOH:YYYY-MM-DD:HH-MM-SS:BCF=<BCF NO.>; THIS COMMANDS TELLS ABOUT THE HISTORY OF ALARMS. 6. ZAHO:ET:; TO CHECK ALARMS ON ETS. 7. ZYMO:ET=<ET NO.>; TO CHECKET LINK STATUS HAVE AN ERROR OR NOT. 8. ZDTI:::PCM=<ET NO.>; TO INTERROGRATE ABOUT LAPD SIGNALS ON PARTICULAR ET. 9. ZUSI:TCSM; TO CHECK ALARMS ON TRANSCODERS. 10. ZACC<ALARM NO.> TO DELETE PARTICULAR ALARM ON ET. 11. ZAHO; TO CHAEK ALARMS ON BSC. 12. ZEQS:BTS=<BTS NO.>:L or U; TO LOCK OR UNLOCK BTS. 13. ZEFS:BCF=<BCF NO.>L OR U; TO LOCK OR UNLOCK BCF. 14. ZUSI:ET; TO CHECK ET STATUS WEATHER IT IS BLOCKING OR WORKING . 15. ZUSU:ET=<ET NO.>;-TO CHANGE THE STATE OF ET TO BL,WO,SE. 16. ZERO:BCF=<BCF NO.>; TO SEE ALL THE PARAMETERS OF BCF. 17. ZFWO:BCSU=0&&6:BTS:; TO CHECK ALL THE GB LINKS IN THE PARTICULAR BSC. 18. ZESI:; TI CHECK EDAP GPRS MAPPING . 19. ZDSB:::PCM=<ET NO.>; TO CHECK ALL THE PARAMETERS OF LAPD. 20. ZWIP:GSW:<ET NO.>; TO CHECK THE ET ,IS IN WHICH INTERFACE. 21. ZYEF:ET=<ET NO.>; TO CHECK WEATHER THE LOOP ON ET IS GETTING OR NOT. 22. ZUSU:ET=<ET NO.>; FOR RESETTING ET PORT

23. ZYEC:ET=<ET NO.>:NORM,CRC4,OFF; TO CHANGE ET MODE TO CRC4 OR DBLF. 24. ZFWO:BCSU=0&&6:BTS;TO CHECK GB LINKS IN THE PARTICULAR BSC. 25. ZESI; TO CHECK EDAP GPRS MAPPING. 26. ZDSB:::PCM=<ET NO.>; TO CHECK ALL THE PARAMETERS OF LAPDS. 27 ZWIP:GSW:<ET NO.>; TO CHECK THE ET ,IS IN WHICH INTERFACE. 28. ZYEI:ET=<ET NO.>; TO INTERROGRATE ABOUT THE ET MODE. 30. ZEFR:<BCF NO.>SITE OR OMU; TO GIVE RESET TO WHOLE SITE OR OMU OF THE SITE . 31. ZRCI:SEA=3:CGR=1:PRINT=5; TO CHECK THE STATUS OF CKT. OF TRANSCODERS AND ALSO TO SEE THE KICK NO. 32. ZNEL; TO CHECK THE STATUS OF SIGNALLING. 33. ZDRA : BSC CLOCK CHECK. 34. ZQNI : C-NUMBER. 35. ZQVC : OMC00000OPAD,BSC(C-NUMBER)PAD:; - TO REMOTE OTHER BSC 36. ZABO : OUTPUT BLOCKED ALARM. 37. ZUCI : COMP; CHECK BSC COMP UNIT. 38.ZUSS : BSC RESTART COMMAND 39.ZDTI:::SAPI=62; CHECK ALL ET NUMBERS 40.ZEFO:BCF NO:IOP:; - TO CHECK POLORITY OF ALARM 41.ZEFX:BCF NO:INBR=ALARM NUM:POL=OPEN OR CLOSED; TO CHANGE POLARITY OF ALARM. 42.ZDTF:TCSM;TO CHECK ALL THE TCSM 43.ZWQO:CR; TO CHECK THE SOFTWARE PACKAGE 44.ZWUC: TO CREATE ET (ZWUC:ET,512:ET16,0:IF=A:BCSU,0;) 45. ZYMO:ET,512; TO CHECK ET HISTTROY ALARMS 46. ZISI; I/O DEVICE WORKING STATE AND SPARE DEVICE 47. ZTPM: MEASUR, TRAFFIC:ALL,0-00-23-00,60:; 48. ZEGO;NETWORK HANDLING COMMAND 49.ZDSE:TO CREATE TRX SIGNAL 50.ZERC:TO CREATE TRX 51.ZEQO : TO CHECK FREQEUNCY 52.ZDTC:TO UNLOCK TRX SIGNAL. 53.ZEAP : HANDOVER CHECKING 54.ZEQO : TO CHECK GENA AND EGENA 55.ZEQV : TO CHECK GENA AND EGENA STATUS 56.ZDTF:TO CHECK TCSM 57.ZDSD TO DELETE TRX SIGNAL 58-ZERD-TO DELETE TRX 59- ZQUE:BCF=274,TRE=2:1:4,20,0;- to see the serial no. of FIFA

You might also like