Scribd
Upload
273 views

Pipe Flow

This document contains calculations for flow in a pipe using the Manning formula. It analyzes flow for a 0.5m diameter pipe with a 1% slope. It calculates flow for the pipe at 75% full diameter and 50% full diameter. For both scenarios, it determines flow rate, velocity, flow depth, hydraulic area, and compares flow to the required flow rate. Flow requirements are met for both scenarios.

Uploaded by

engrfarhanAAA
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
273 views

Pipe Flow

This document contains calculations for flow in a pipe using the Manning formula. It analyzes flow for a 0.5m diameter pipe with a 1% slope. It calculates flow for the pipe at 75% full diameter and 50% full diameter. For both scenarios, it determines flow rate, velocity, flow depth, hydraulic area, and compares flow to the required flow rate. Flow requirements are met for both scenarios.

Uploaded by

engrfarhanAAA
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

CONT.No.: 56115002 DATE : 22-May-13 BY : R.C.S CHECKED : R.C.

S DATE : 16-7-01

FLOW IN PIPE - MANNING FORMULA


Project: Subject: PROJECT SAMPLE PIPE FLOW. GROUND FLOOR. BLDG

SHEET No: 1

Flow required Q =

0.100 m3/s

Coefficient of surface roughness n = Slope of Pipe S = 1 Vertically

0.014 100 Horizontal.

1 %

Diameter of Pipe D = PIPE FULL Manning Formula Q = 0.312/ n* (D)^8/3*S^1/2 Manning Formula V = 0.397/ n* (D)^2/3*S^1/2 Velocity Discharge V= Q= 1.786 m/s 0.3510 m3/s 351.0 %

0.5 m

(MIN 0.8 , MAX 3 M/S) Qf>Qd (Peak Flow 0.75 D , Normal Flow 0.50 D) Flow Depth = H.Area = Rh=0.603*r 0.375 m 0.158125 m2 0.15075 m

Relation Qf/Qd = PIPE 75% Manning Formula Q = V * Hydraulic Area

Manning Formula V = 1/ n* (Rh)^2/3*S^1/2 Velocity Discharge V= Q= 2.02 m/s 0.3199 m3/s 319.9 %

(MIN 0.8 , MAX 3 M/S) Qf>Qd (Peak Flow 0.75 D , Normal Flow 0.50 D) Flow Depth = H.Area = Rh=0.5*r 0.250 m 0.098125 m2 0.125 m

Relation Qf/Qd = PIPE 50% Manning Formula Q = V * Hydraulic Area

Manning Formula V = 1/ n* (Rh)^2/3*S^1/2 Velocity Discharge V= Q= 1.79 m/s 0.1752 m3/s 175.2 %

(MIN 0.8 , MAX 3 M/S) Qf>Qd (Peak Flow 0.75 D , Normal Flow 0.50 D)

Relation Qf/Qd =

You might also like