0% found this document useful (0 votes)

812 views377 pages

1973 US Army Vietnam War M122 Machine Gun Tripod 337p

Uploaded by

akms1982

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

812 views377 pages

1973 US Army Vietnam War M122 Machine Gun Tripod 337p

Uploaded by

akms1982

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 377

CHECK OUT OUR WEBSITE SOME TIME FOR PLENTY OF ARTICES ABOUT SELF DEFENSE,

SURVIVAL, FIREARMS AND MILITARY MANUALS.

http://www.survivalebooks.com/
Thank you for purchasing our ebook package.

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

SUPERSEDES TM 9-1005-245-14,
DATED 7 FEBRUARY 1973
TECHNICAL MANUAL
OPERATOR'S, UNIT, AND DIRECT
SUPPORT MAINTENANCE MANUAL
WITH REPAIR PARTS AND
SPECIAL TOOLS LIST (RPSTL)
FOR
MACHINE GUN MOUNTS
AND COMBINATIONS FOR
TACTICAL/ARMORED
VEHICLES AND GROUND MOUNTING
M122 MACHINE GUN TRIPOD
MOUNT (1005-00-710-5599) (EIC:4EF)
M122A1 MACHINE GUN TRIPOD MOUNT
(1005-01-433-1617)
M3 TRIPOD MOUNT
(1005-00-322-9716) (EIC:4EA)
M66 MACHINE GUN
MOUNT RING (1005-00-701-2810)
M240E1 FLEXIBLE MACHINE GUN
MOUNT (1005-01-254-0332)
M142 MACHINE GUN
MOUNT (1005-00-854-4463)
6650 .50 CAL MACHINE GUN
MOUNT (1005-00-704-6650)
M548 MACHINE GUN
MOUNT (1005-00-783-5494)
MK93 MOD 0 MACHINE GUN MOUNT
(USMC ONLY) (1005-01-383-2949)
MK93 MOD 1 MACHINE GUN
MOUNT (1005-01-383-2757)
M6 MACHINE GUN PEDESTAL
MOUNT (1005-01-411-6341)
M197 MACHINE GUN
MOUNT (1005-01-413-4098)
DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government
agencies and their contractors. This publication is required for administration
and operational purposes, as determined 14 April 1987. Other requests for this
document shall be referred to: ATTN: AMSTA-LC-CIP-WT, TACOM-Rock
Island, 1 Rock Island Arsenal, Rock Island, IL 61299-7630. AIR FORCE
ONLY: Requests for this document shall be referred to Warner Robins
ALC/MMDET, Robins AFB, GA 31098-5609.

DESTRUCTION NOTICE-For unclassified, limited documents, destroy by any

method that will prevent disclosure of contents or reconstruction of the
document.

DECEMBER 1994
HEADQUARTERS, DEPARTMENT OF THE ARMY, MARINE
CORPS, AND AIR FORCE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
WARNING
It is essential that operational procedures for the machine gun be followed before
installing on a mount. Dangerous procedures such as mounting, dismounting, cleaning,
repairing, or operating a machine gun on a mount without first having knowledge of the
operation of the machine gun and all safety precautions to be followed could result in
injury or death to personnel. DO NOT attempt to mount or dismount or inspect or repair a
mounted machine gun without first clearing the machine gun chamber and feedways of
ammunition.
WARNING
Case is under spring tension. To avoid injury to personnel, use care when removing
case.
WARNING
To avoid injury to your eyes, use care when removing and installing spring-loaded parts.
WARNING
To avoid injury to your eyes, wear safety glasses when grinding parts.
WARNING
Do not keep live ammunition near work/maintenance area.
WARNING
Dry cleaning solvent (SD) is flammable. Do not clean parts near an open flame or in a
smoking area. Dry cleaning solvent evaporates quickly and has a drying effect on the
skin. When used without protective gloves, solvent may cause irritation to or cracking of
the skin.
WARNING
Some objects covered in this manual are heavy and need two soldiers to lift.
WARNING
Some objects are hot to the touch. Ensure proper cooling has occurred before handling.

PIN: 073479-005

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
HEADQUARTERS
DEPARTMENT OF THE ARMY
Washington D.C., 22 March 2002

CHANGE
NO. 5

OPERATOR'S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL

WITH REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
FOR
MACHINE GUN MOUNTS AND COMBINATIONS
FOR TACTICAL/ARMORED VEHICLES AND GROUND MOUNTING
M122 MACHINE GUN TRIPOD MOUNT (1005-00-710-5599) (EIC: 4EF)
M122A1 MACHINE GUN TRIPOD MOUNT (1005-01-433-1617)
M3 TRIPOD MOUNT (1005-00-322-9716) (EIC: 4EA)
M66 MACHINE GUN MOUNT RING (1005-00-701-2810)
M240E1 FLEXIBLE MACHINE GUN MOUNT (1005-01-254-0332)
M142 MACHINE GUN MOUNT (1005-00-854-4463)
6650 .50 CAL MACHINE GUN MOUNT (1005-00-704-6650)
M548 MACHINE GUN MOUNT (1005-00-783-5494)
MK93 MOD 0 MACHINE GUN MOUNT (USMC ONLY) (1005-01-383-2949)
MK93 MOD 1 MACHINE GUN MOUNT (1005-01-383-2757)
M6 MACHINE GUN PEDESTAL MOUNT (1005-01-411-6341)
M197 MACHINE GUN MOUNT (1005-01-413-4098)
DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government agencies and their contractors.
This publication is required for administration and operational purposes, as determined 14 April 1987. Other
requests for this document shall be referred to: ATTN: AMSTA-LC-CIP-WT, TACOM-Rock Island, 1 Rock
Island Arsenal, Rock Island, IL 61299-7630. AIR FORCE ONLY: Requests for this document shall be
referred to Warner Robins ALC/MMDET, Robins AFB, GA 31098-5609.
DESTRUCTION NOTICE - For unclassified, limited documents, destroy by any method that will prevent
disclosure of contents or reconstruction of the document.
TM 9-1005-245-13&P, 15 December 1994, is changed as follows:
1. Remove old pages and insert new pages indicated below.
2. New or changed text material is indicated by vertical bar in the margin of the page. Change
to illustrations is indicated by miniature pointing hands. Added illustrations are indicated by
shaded areas.
Remove Pages

Insert Pages

None
i thru vi
1-1 thru 1-4
1-11 and 1-12
2-7 and 2-8
2-13 and 2-14
16-1 thru 16-5/(16-6 blank)
A-1 and A-2
B-9/(B-10 blank)
C-7 and C-8

A thru C/(D blank)

i thru vi
1-1 thru 1-4
1-11 and 1-12
2-7 thru 2-8.1/(2-8.2 blank)
2-13 and 2-14
16-1 thru 16-5/(16-6 blank)
A-1 and A-2
B-9/(B-10 blank)
C-7 and C-8

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Remove Pages
C-39-1 thru C-44-1/(C-44-2 blank)
None
I-1 thru I-22
None
Index-1 thru Index-8
2028-2
Front Cover and Warning Page

Insert Pages
C-39-1 thru C-44-1/(C-44-2 blank)
C-45-1 thru C-48-1/(C-48-2 blank)
I-1 thru I-23/(1-24 blank)
F-1 and F-2
Index-1 thru Index-7/(8 blank)
2028
Front Cover and Warning Page

3. File this change in the front of the publication for reference purposes.

By Order of the Secretary of the Army:

ERIC K. SHINSEKI
General, United States Army
Chief of Staff
Official:

JOEL B. HUDSON
Administrative Assistant to the
Secretary of the Army
0112705

DISTRIBUTION: To be distributed in accordance with the Initial Distribution Number (IDN)

401092, requirements for TM 9-1005-245-13&P.

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
CHANGE
NOA
Washington

HEADQUARTERS
DEPARTMENT OF THE ARMY
D.C.,
5 March
1998

OPERATOR'S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL

WITH REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
FOR
MACHINE GUN MOUNTS AND COMBINATIONS
FOR TACTICAL/ARMORED
VEHICLES AND GROUND MOUNTING
M122 MACHINE GUN TRIPOD MOUNT (1005-00-710-5599) (EIC: 4EF)
M122A1 MACHINE GUN TRIPOD MOUNT (1005-01-433-1617)
M3 TRIPOD MOUNT (1005-00-322-9716) (EIC: 4EA)
M66 MACHINE GUN MOUNT RING (1005-00-701-2810)
M240E1 FLEXIBLE MACHINE GUN MOUNT (1005-01-254-0332)
M142 MACHINE GUN MOUNT (1005-00-854-4463)
6650.50 CAL MACHINE GUN MOUNT (1005-00-704-6650)
M548 MACHINE GUN MOUNT (1005-00-783-5494)
MK93 MOD 0 MACHINE GUN MOUNT (USMC ONLY) (1005-01-383-2949)
MK93 MOD 1 MACHINE GUN MOUNT (1005-01-383-2757)
M6 MACHINE GUN PEDESTAL MOUNT (1005-01-411-6341)
M 197 MACHINE GUN MOUNT (1005-01-413-4098)
DISTRIBUTION
STATEMENT C. Distribution authorized to U.S. Government agencies and their
contractors. This publication is required for administration and operational purposes, as determined 14
April 1987. Other request for this document shall be referred to Director, Armament and Chemical
Acquisition and Logistics Activity, ATTN: AMSTA-AC-NML, Rock Island, IL 61299-7630. AIR FORCE
ONLY: Request for this document shall be referred to Warner Robins ALC/MMDET, Robins AFB GA
31098-5609.
DESTRUCTION NOTICE - For unclassif ied, limited documents,
disclosure of contents or reconstruction of the document.

TM 9-1005-245-13&P,

15 December

destroy by any method that will prevent

1994, is changed as follows:

Remove old pages and insert new pages indicated below.

New or changed material is indicated by vertical bar in the margin of the page.
Remove Pages

Insert Pages

i thru ii
v thru vi
1-3 thru 1-4
1-9 thru 1-12
2-3 thru 2-6
2 9- thru 2-12
14-1 thru 14-15/(14-16 blank)
15-3 thru 15-4
B-7 thru B-9/(B-1 0 blank)
C-30-1 thru C-33-2
C-36-1 thru C-39
I-7 thru 1-23
E-1 thru E-2
Front Cover and Warning Page

i thru ii
v thru vi
1-3 thru 1-4
1-9 thru 1-12
2-3 thru 2-6
2 9- thru 2-12
14-1 thru 14-16
15-3 thru 15-4
B-7 thru B-9/(B-1 0 blank)
C-30-1 thru C-33-2
C-36-1 thru C-39
I-7 thru 1-22
E-1 thru E-2
Front Cover and Warning Page

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P11
AIR FORCE T.O. 11W2-8-1-322

File this change in the front of the publication for reference

purposes.

By Order of the Secretary of the Army-

Office:

DENNIS J. REIMER
General United States Army
Chief Of Staff

,A61
46 Xej
-47JOEL B. HUDSON
Administrative Assistant to the
Secretary of the Amy
04W
DISTRIBUTION:
To be distributed
for TM 9-1005-245-13&P.

in accordance

with

IDN 401092 requirements

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/l
AIR FORCE T.O. 11 W2-8-1-322
c3

CHANGE

HEADQUARTERS
DEPARTMENT OF THE ARMY

Washington D.C., 15 October 1997

NO. 3

OPERATORS, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL

WITH REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
FOR
MACHINE GUN MOUNTS AND COMBINATIONS FOR TACTICAUARMORED
VEHICLES AND GROUND MOUNTING
M122 MACHINE GUN TRIPOD MOUNT (1005-00-710-5599) (EIC:4EF)
Ml22Al MACHINE GUN TRIPOD MOUNT (1005-00-433-1617)
M3 TRIPOD MOUNT (1005-00-322-9716) (EIC:4EA)
M66 MACHINE GUN MOUNT RING (1005-00-701-2810)
M240El FLEXIBLE MACHINE GUN MOUNT (1005-01-254-0332)
M142 MACHINE GUN MOUNT (1005-00-854-4463)
6650 .50 CAL MACHINE GUN MOUNT (1005-00-704-6650)
M548 MACHINE GUN MOUNT (1005-00-783-5494)
MK93 MOD 0 MACHINE GUN MOUNT (USMC ONLY) (1005-01-383-2949)
MK93 MOD 1 MACHINE GUN MOUNT (1005-01-383-2757)
M6 MACHINE GUN PEDESTAL MOUNT (1005-01-411-6341)
M197 MACHINE GUN MOUNT (1005-01-413-4098)
DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government agencies and their
contractors. This publication is required for administration and operational purposes, as determined 14
April 1987. Other requests for this document shall be referred to Director, Armament and Chemical
Acquisition and Logistics Activity, Al-TN: AMSTA-AC-NML, Rock Island, IL 61299-7630. AIR FORCE
Robins AFB GA
ONLY: Requests for this document shall be referred to Warner Robins ALCIMMDET,
31098-5609.
ARMY TM 9-1005-245-13&P, MARINE CORPS TM 1005-1 3&P/l, AIR FORCE T.O. 11 W2-8-1-322,
1994, is changed as follows:
1.

Remove old pages and insert new pages indicated below.

New or changed material is indicated by vertical bar in the margin of the page.

Remove Pages

Insert Pages

i thru vi
1-3 thru l-6
l-11/(1-12 blank)
2-l thru 2-13/(2-14 blank)
3-l thru 3-3/(3-4 blank)
4-3 thru 4-9/(4-l 0 blank)
None
None
A-l and A-2
B-7 thru B-9/(8-10 blank)
c-37-1
l-9 thru l-20
Index-l thru Index-7/(lndex-8
blank)
Front Cover and Warning Page

i thru vi
l-3 thru l-6
l-11 and l-12
2-1 thru 2-21/(2-22 blank)
3-1 thru 3-3/(3-4 blank)
4-3 thru 4-10
15-l thru 15-7/(15-8 blank)
16-1 thru 16-5/(16-6 blank)
A-l and A-2
B-7 thru B-9/(B-10: blank)
C-37-l thru C-44-l
l-9 thru l-23
Index-l thru Index-8
Front Cover and Warning Page

File this change sheet in the front of the publication for reference purposes.

15 December

By Order of the Secretary of the Army:

DENNIS J. REIMER
General, United States Army
Chief of Staff

Official
:
JOEL B. HUDSON
Administrative Assistant to the
Secretary of the Army
03947
DISTRIBUTION:
(IDN)

401092

To be distributed
requirements
for

in accordance
9-1005-245-13&P.

with

the

initial

distribution

number

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
CHANGE
NO.2

HEADQUARTERS
DEPARTMENT OF THE ARMY
Washington
D.C., 8 October 1997
OPERATOR'S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL
WITH REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
FOR
MACHINE GUN MOUNTS AND COMBINATIONS
FOR TACTICAL/ARMORED
VEHICLES AND GROUND MOUNTING
M122 MACHINE GUN TRIPOD MOUNT (1005-00-710-5599) (EIC: 4EF)
M1 22A1 MACHINE GUN TRIPOD MOUNT (11005-01-433-1617)
M3 TRIPOD MOUNT (1005-00-322-9716) (EIC: 4EA)
M66 MACHINE GUN MOUNT RING (1005-00-701-2810)
M240E1 FLEXIBLE MACHINE GUN MOUNT (1005-01-254-0332)
M142 MACHINE GUN MOUNT (1005-00-854-4463)
6650.50 CAL MACHINE GUN MOUNT (1005-00-704-6650)
M548 MACHINE GUN MOUNT (1005-00-783-5494)
MK93 MOD 0 MACHINE GUN MOUNT (USMC ONLY) (1005-01-383-2949)
MK93 MOD 1 MACHINE GUN MOUNT (11005-01-383-2757)

DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government agencies and their

contractors. This publication is required for administration and operational purposes, as determined 14
April 1987. Other request for this document shall be referred to Director, Armament and Chemical
Acquisition and Logistics Activity, ATTN: AMSTA-AC-NML, Rock Island, IL 61299-7630. AIR FORCE
ONLY: Request for this document shall be referred to Warner Robins ALC/MMDET, Robins AFB GA
31098-5609.
DESTRUCTION
NOTICE - For unclassified, limited documents,
disclosure of contents or reconstruction of the document.

TM 9-1005-245-13&P,

destroy by any method that will prevent

15 December 1994, is changed as follows:

Remove old pages and insert new pages indicated below.

New or changed material

is indicated by vertical bar in the margin of the page.

Remove Paaes

Insert Paaes

i thru vi
1-1 thru 1-6
6-1 thru 6-17/6-18 blank
9-1 thru 9-8
B-3 thru B-6
C-7 thru C-8
C-1-1 thru C-7-1
C-22-1 thru C-24-1
1-1 thru 1-25

i thru vi
1-1 thru 1-6.1/1-6.2 blank
6-1 thru 6-20
9-1 thru 9-7/9-8 blank
B-3 thru B-6
C-7 and C-8
C-1-1 thru C-7-1
C-22-1 thru C-24-1/C-24-2
1-1 thru 1-20

File this change in the front of the publication for reference purposes.

blank

By Order of the
The Secretary

Secretary
of the Army and Commandant of
of the Air Force:

the Marine

Corps

and

DENNIS J. REIMER
General, United States Army
Chief of Staff

Official
:
J
JOEL B. HUDSON
Administrative Assistant to the
Secretary of the Army
03843

Colonel,
Director,
Marine
DISTRIBUTION:
To be distributed
in accordance with
(IDN) 401092 requirements
for TM 9-1005-245-13&P.

the

initial

USMC
Program, Support
Corps Systems Command
distribution

number

CHANGE

HEADQUARTERS
DEPARTMENT OF THE ARMY
Washington D.C.4

NO. 1
OPERATORS, UNIT, AND DIRECT
SUPPORT MAINTENANCE MANUAL
WITH REPAIR PARTS AND
SPECIAL TOOLS LIST (RPSTL)
FOR
MACHINE GUN MOUNTS
AND COMBINATIONS
FOR
TACTICAI-JARMORED
VEHICLES AND GROUND MOUNTING
M122 MACHINE GUN TRIPOD
MOUNT (1005-00-710-5599) (EIC:4EF)
M3 TRIPOD MOUNT
(1005-00-322-9716) (EIC:4EA)
M66 MACHINE GUN
MOUNT RING (1005-00-701-2810)
M240E1 FLEXIBLE MACHINE GUN
MOUNT (1005-01-254-0332)
M142 MACHINE GUN
MOUNT (1005-00-854-4463)
6650.50 CAL MACHINE GUN,.
MOUNT (1005-00-704-6650)
M548 MACHINE GUN
MOUNT (1005-00-783-5494)
TM 9-1005-245-13&P,

December 1994, is changed as follows:

Remove old pages and insert new pages indicated below.

New or changed material is indicated by vertical bar in the margin of the page.

Remove Pages

Insert Pages

i thru v/(vi blank)

1-1 thru 1-8
2-1 thru 2-8
9-1 thru 9-8
None
None
B-1 and B-2
B-5 thru B-7/(B-8 blank)
C-1 and C-2
C-30-1
1-1 thru 1-20
Inclex-1 thru Index-6
Front Cover and Warning Page

i thru vi
1 -1 thru 1-11/(1 -12 blank)
2-1 thru 2-13/(2-14 blank)
9-1 thru 9-4
13-1/(13-2 blank)
14-1 thru 14-15/(14-16 blank)
B-1 and B-2
B-5 thru B-9/(B-10 blank)
C-1 and C-2
C-30-1 thru C-37-1
1-1 thru 1-25
Index-1 thru Index-7/(Index-8 blank)
Front Cover and Warning Page

File this change sheet in the front of the publication for reference purposes.

March 1996 9

By Order

of the

Secretary

of the

Army and Commandant of the Marine

Corps:

DENNIS J. REIMER
General, United States Army
Chief of Staff

Official
:
YVONNE
M. HARRISON
Administrative
Assistant to the
Secretafy of the Army
01194

DISTRIBUTION:
To be distributed
in accordance
requirements
for TM 9-1005-245-13&P.

D. R. Bloomer,
Colonel,
USMC
Director,
Program
Support
Marine
Corps
System
Command

with

DA Form 12-40-E,

block

1092

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

LIST OF EFFECTIVE PAGES

Note: a vertical bar in the outer margin of the page indicates the portion of the text
affected by the changes. Changes to illustrations are indicated by miniature
pointing hands. Changes to diagrams are indicated by shaded areas.

Dates of issue for original and changed pages are:

Original ........................0 ..............15 December 1994
Change ........................1 ...................... 4 March 1996
Change ........................2 ................... 8 October 1997

Change........................ 3................. 15 October 1997

Change ....................... 4...................... 5 March 1998
Change ....................... 5.................... 22 March 2002

TOTAL NUMBER OF PAGES IN THIS PUBLICATION IS 344, CONSISTING OF THE FOLLOWING:

Page
No.

*Change
No.

Cover .................................. 5
Warning Page..................... 0
A ......................................... 5
B ......................................... 5
C/(D blank) ......................... 5
i........................................... 5
ii .......................................... 5
iii ......................................... 5
iv ......................................... 5
v.......................................... 5
vi ......................................... 5
1-1 ........................................ 5
1-2 ........................................ 2
1-3 ........................................ 4
1-4 ........................................ 5
1-4.1/(1.4.2 blank)................ 3
1-5 ........................................ 3
1-6 ........................................ 2
1-6.1/1-6.2 blank)................. 2
1-7 ........................................ 1
1-8 ........................................ 1
1-9 ........................................ 0
1-10 ...................................... 4
1-11 ...................................... 4
1-12 ...................................... 5
2-1 ........................................ 3
2-2 ........................................ 3
2-3 ........................................ 4
2-4 ........................................ 4
2-5 ........................................ 3
2-6 ........................................ 4
2-7 ........................................ 5
2-8 ........................................ 5
2-8.1/(2-8.2 blank)................ 5
2-9 ........................................ 4
2-10 ...................................... 4
2-11 ...................................... 4
2-12 ...................................... 4

Page
No.

*Change
No.

2-13 ........................................... 3
2-14 ........................................... 5
2-15 ........................................... 3
2-16 ........................................... 3
2-17 ........................................... 3
2-18 ........................................... 4
2-19 ........................................... 3
2-20 ........................................... 3
2-21/(2-22 blank) ....................... 3
3-1 ............................................. 0
3-2 ............................................. 3
3-3/(3-4 blank) ........................... 3
4-1 ............................................. 0
4-2 ............................................. 0
4-3 ............................................. 0
4-4 ............................................. 3
4-5 ............................................. 3
4-6 ............................................. 0
4-7 ............................................. 0
4-8 ............................................. 3
4-9 ............................................. 0
4-10 ........................................... 3
5-1 ............................................. 0
5-2 ............................................. 0
5-3 ............................................. 0
5-4 ............................................. 0
5-5/(5-6 blank) ........................... 0
6-1 ............................................. 2
6-2 ............................................. 2
6-3 ............................................. 2
6-4 ............................................. 2
6-5 ............................................. 2
6-6 ............................................. 2
6-7 ............................................. 2
6-8 ............................................. 2
6-9 ............................................. 2
6-10 ........................................... 2
6-11 ........................................... 2

Page
No.

*Change
No.

6-12 ....................................... 2
6-13 ....................................... 2
6-14 ....................................... 2
6-15 ....................................... 2
6-16 ....................................... 2
6-17 ....................................... 2
6-18 ....................................... 2
6-19 ....................................... 2
6-20 ....................................... 2
7-1 ......................................... 0
7-2 ......................................... 0
7-3 ......................................... 0
7-4 ......................................... 0
7-5 ......................................... 0
7-6 ......................................... 0
7-7 ......................................... 0
7-8 ......................................... 0
7-9 ......................................... 0
7-10 ....................................... 0
7-11 ....................................... 0
7-12 ....................................... 0
7-13 ....................................... 0
7-14 ....................................... 0
7-15 ....................................... 0
7-16 ....................................... 0
7-17 ....................................... 0
7-18 ....................................... 0
7-19 ....................................... 0
7-20 ....................................... 0
7-21 ....................................... 0
7-22 ....................................... 0
7-23/(7-24 blank) ................... 0
8-1 ......................................... 0
8-2 ......................................... 0
8-3 ......................................... 0
8-4 ......................................... 0
8-5 ......................................... 0
8-6 ......................................... 0

*Zero in this column indicates an original page

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
LIST OF EFFECTIVE PAGES -- Cont.
Dates of issue for original and changed pages are:
Original ........................0 ............. 15 December 1994
Change ........................1 ......................4 March 1996
Change ........................2 ................... 8 October 1997
Page
No.

*Change
No.

8-7 ........................................ 0
8-8 ........................................ 0
8-9 ........................................ 0
8-10 ...................................... 0
8-11/(8-12 blank).................. 0
9-1 ........................................ 2
9-2 ........................................ 2
9-3 ........................................ 2
9-4 ........................................ 2
9-5 ........................................ 2
9-6 ........................................ 2
9-7/(9-8 blank)...................... 2
10-1 ...................................... 0
10-2 ...................................... 0
10-3 ...................................... 0
10-4 ...................................... 0
10-5/(10-6 blank).................. 0
11-1 ...................................... 0
11-2 ...................................... 0
11-3 ...................................... 0
11-4 ...................................... 0
11-5 ...................................... 0
11-6 ...................................... 0
11-7 ...................................... 0
11-8 ...................................... 0
12-1 ...................................... 0
12-2 ...................................... 0
12-3/(12-4 blank).................. 0
13-1/(13-2 blank).................. 1
14-1 ...................................... 4
14-2 ...................................... 4
14-3 ...................................... 1
14-4 ...................................... 4
14-5 ...................................... 1
14-6 ...................................... 4
14-7 ...................................... 4
14-8 ...................................... 1
14-9 ...................................... 4
14-10 .................................... 4
14-11 .................................... 4

Page
No.

Change 5

*Change
No.

14-12 ......................................... 1
14-13 ......................................... 4
14-14 ......................................... 4
14-15 ......................................... 4
14-16 ......................................... 4
15-1 ........................................... 3
15-2 ........................................... 3
15-3 ........................................... 4
15-4 ........................................... 3
15-5 ........................................... 3
15-6 ........................................... 3
15-7/(15-8 blank) ....................... 3
16-1 ........................................... 5
16-2 ........................................... 5
16-3 ........................................... 5
16-4 ........................................... 5
16-4.1 ........................................ 5
16-4.2 ........................................ 5
16-5/(16-6 blank) ....................... 5
A-1 ............................................. 5
A-2 ............................................. 3
B-1 ............................................. 1
B-2 ............................................. 0
B-3 ............................................. 2
B-4 ............................................. 2
B-5 ............................................. 2
B-6 ............................................. 2
B-7 ............................................. 3
B-8 ............................................. 4
B-9/(B-10 blank) ........................ 5
C-1............................................. 1
C-2............................................. 0
C-3............................................. 0
C-4............................................. 0
C-5............................................. 0
C-6............................................. 0
C-7............................................. 5
C-8............................................. 2

*Zero in this column indicates an original page

Change........................ 3................. 15 October 1997

Change ....................... 4...................... 5 March 1998
Change ....................... 5.................... 22 March 2002
Page
No.

*Change
No.

C-1-1 ..................................... 2
Figure C-2 ............................. 2
C-2-1 ..................................... 2
Figure C-3 ............................. 2
C-3-1 ..................................... 2
Figure C-4 ............................. 2
C-4-1 ..................................... 2
Figure C-5 ............................. 2
C-5-1 ..................................... 2
Figure C-6 ............................. 2
C-6-1 ..................................... 2
C-7-1 ..................................... 2
C-8-1 ..................................... 0
C-9-1 ..................................... 0
Figure C-10 ........................... 0
C-10-1 ................................... 0
C-10-2 ................................... 0
Figure C-11 ........................... 0
C-11-1 ................................... 0
Figure C-12 ........................... 0
C-12-1 ................................... 0
Figure C-13 ........................... 0
C-13-1 ................................... 0
Figure C-14 ........................... 0
C-14-1 ................................... 0
C-14-2 ................................... 0
Figure C-15 ........................... 0
C-15-1 ................................... 0
C-16-1 ................................... 0
C-17-1 ................................... 0
Figure C-18 ........................... 0
C-18-1 ................................... 0
Figure C-19 ........................... 0
C-19-1 ................................... 0
Figure C-20 ........................... 0
C-20-1 ................................... 0
C-20-2 ................................... 0
Figure C-21 ........................... 0
C-21-1 ................................... 0
C-22-1 ................................... 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
LIST OF EFFECTIVE PAGES -- Cont.
Dates of issue for original and changed pages are:
Original ........................0 ..............15 December 1994
Change ........................1 ...................... 4 March 1996
Change ........................2 ................... 8 October 1997
Page
No.

*Change
No.

Figure C-23 .......................... 2

C-23-1 .................................. 2
Figure C-24 .......................... 2
C-24-1/(C-24-2 blank) .......... 2
C-25-1 .................................. 0
Figure C-26 .......................... 0
C-26-1 .................................. 0
C-26-2 .................................. 0
C-27-1 .................................. 0
Figure C-28 .......................... 0
C-28-1 .................................. 0
C-28-2 .................................. 0
C-29-1 .................................. 0
Figure C-30 .......................... 0
C-30-1 .................................. 0
Figure C-31 .......................... 4
C-31-1 .................................. 4
Figure C-32 .......................... 4
C-32-1 .................................. 0
Figure C-33 .......................... 4
C-33-1 .................................. 4
C-33-2 .................................. 0
Figure C-34 .......................... 1
C-34-1 .................................. 1
Figure C-35 .......................... 1
C-35-1 .................................. 1
Figure C-36 .......................... 1
C-36-1 .................................. 0
Figure C-37 .......................... 4
C-37-1 .................................. 4
Figure C-38 .......................... 0
C-38-1 .................................. 3
Figure C-39 (1 of 3).............. 4
Figure C-39 (2 of 3).............. 0
Figure C-39 (3 of 3).............. 4
C-39-1 .................................. 5
Figure C-40 .......................... 5
C-40-1 .................................. 3
Figure C-41 .......................... 5
C-41-1 .................................. 5
Figure C-42 .......................... 5
C-42-1 .................................. 5

Change........................ 3................. 15 October 1997

Change ....................... 4...................... 5 March 1998
Change ....................... 5.................... 22 March 2002

Page
No.

*Change
No.

Figure C-43 ............................... 0

C-43-1 ....................................... 5
Figure C-44 ............................... 5
C-44-1 ....................................... 5
Figure C-45 ............................... 5
C-45-1 ....................................... 5
Figure C-46 ............................... 5
C-46-1 ....................................... 5
Figure C-47 ............................... 5
C-47-1 ....................................... 5
Figure C-48 ............................... 5
C-48-1/C-48-2 blank) ................ 5
BULK-1...................................... 0
I-1 .............................................. 5
I-2 .............................................. 5
I-3 .............................................. 5
I-4 .............................................. 5
I-5 .............................................. 5
I-6 .............................................. 5
I-7 .............................................. 5
I-8 .............................................. 5
I-9 .............................................. 5
I-10 ............................................ 5
I-11 ............................................ 5
I-12 ............................................ 5
I-13 ............................................ 5
I-14 ............................................ 5
I-15 ............................................ 5
I-16 ............................................ 5
I-17 ............................................ 5
I-18 ............................................ 5
I-19 ............................................ 5
I-20 ............................................ 5
I-21 ............................................ 5
I-22 ............................................ 5
I-23/(I-24 blank) ......................... 5
D-1............................................. 0
D-2............................................. 0
E-1............................................. 4
E-2............................................. 4
F-1 ............................................. 5
F-2 ............................................. 5

Page
No.

*Change
No.

Index 1....................................... 5
Index 2....................................... 5
Index 3....................................... 5
Index 4....................................... 5
Index 5....................................... 5
Index 6....................................... 5
Index 7/(8 blank) ....................... 5

*Zero in this column indicates an original page

Change 5

C/(D blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
TECHNICAL MANUAL
ARMY No. 9-1005-245-13&P
MARINE CORPS No. 1005-13&P/1
AIR FORCE No. 11W2-8-1-322

HEADQUARTERS
DEPARTMENT OF THE ARMY
U.S. MARINE CORPS
U.S. AIR FORCE
Washington, DC., 15 December 1994

Operator's, Unit, and Direct Support Maintenance Manual

with Repair Parts and Special Tools List (RPSTL)
for
Machine Gun Mounts and Combinations
for Tactical/Armored Vehicles and Ground Mounting
M122 Machine Gun Tripod Mount (1005-00-710-5599) (EIC: 4EF)
M122A1 Machine Gun Tripod Mount (1005-01-433-1617)
M3 Tripod Mount (1005-00-322-9716) (EIC: 4EA)
M66 Machine Gun Mount Ring (1005-00-701-2810)
M240E1 Flexible Machine Gun Mount (1005-01-254-0332)
M142 Machine Gun Mount (1005-00-854-4463)
6650 .50 Cal Machine Gun Mount (1005-00-704-6650)
M548 Machine Gun Mount (1005-00-783-5494)
MK93 MOD 0 Machine Gun Mount (USMC Only) (1005-01-383-2949)
MK93 MOD 1 Machine Gun Mount (1005-01-383-2757)
M6 Machine Gun Pedestal Mount (1005-01-411-6341)
M197 Machine Gun Mount (1005-01-413-4098)
REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS
You can help improve this publication. If you find any mistakes or if you know of a way to improve the
procedures, please let us know. Submit your DA Form 2028 (Recommended Changes to Equipment
Technical Publications ), through the Internet, on the Army Electronic Product Support (AEPS) website. The
Internet address is http://aeps.ria.army.mil. If you need a password, scroll down and click on ACCESS
REQUEST FORM. The DA Form 2028 is located in the ONLINE FORMS PROCESSING section of the
AEPS. Fill out the form and click on SUBMIT. Using this form on the AEPS will enable us to respond quicker
to your comments and better manage the DA Form 2028 program. You may also mail, fax or E-mail your letter
or DA Form 2028 direct to: AMSTA-LC-CI Tech Pubs, TACOM-RI, 1 Rock Island Arsenal, Rock Island, IL
61299-7630. The email address is [email protected]. The fax number is DSN 793-0726 or
Commercial (309) 782-0726.
DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government agencies and their contractors.
This publication is required for administration and operational purposes, as determined 14 April 1987. Other
requests for this document shall be referred to: ATTN: AMSTA-LC-CIP-WT, TACOM-Rock Island, 1 Rock
Island Arsenal, Rock Island, IL 61299-7630. AIR FORCE ONLY: Requests for this document shall be referred
to Warner Robins ALC/MMDET, Robins AFB, GA 31098-5609.
DESTRUCTION NOTICEFor unclassified, limited documents, destroy by any method that will prevent
disclosure of contents or reconstruction of the document.

*This manual supersedes TM 9-1005-245-14, dated 7 February 1973, including all changes.

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Table of Contents

Page
HOW TO USE THIS MANUAL ................................................................ vi
CHAPTER 1.
Section I.
Section II.
Section III.
CHAPTER 2.
Section I.
Section II.
Section III.
Section IV.
CHAPTER 3.
Section I.
Section II.
CHAPTER 4.
Section I.
Section II.
Section III.
Section IV.
Section V.
Section VI.

CHAPTER 5.

INTRODUCTION
General Information.................................................................................. 1-1
Equipment Description and Data ............................................................. 1-2
Principles of Operation ............................................................................. 1-6
OPERATING INSTRUCTIONS
Description and Use of Operators Controls and Indicators..................... 2-1
Operator Preventive Maintenance Checks and Services (PMCS)........... 2-2
Operation Under Usual Conditions .......................................................... 2-6
Operation Under Unusual Conditions ...................................................... 2-19
OPERATOR MAINTENANCE
Lubrication Instructions ............................................................................ 3-1
Maintenance Procedures ......................................................................... 3-3
UNIT MAINTENANCE
Repair Parts; Tools; Special Tools; Test, Measurement, and
Diagnostic Equipment (TMDE); and Support Equipment .................... 4-1
Service Upon Receipt............................................................................... 4-1
Unit Preventive Maintenance Checks and Services (PMCS) .................. 4-2
Unit Troubleshooting ................................................................................ 4-5
Preparation for Storage or Shipment ....................................................... 4-9
Preembarkation Inspection of Material in Units Alerted for
Overseas Movement............................................................................ 4-9
DIRECT SUPPORT MAINTENANCE
Direct Support Troubleshooting ............................................................... 5-1

CHAPTER 6.
Section I.
Section II.
CHAPTER 7.
Section I.
Section II.
CHAPTER 8.
Section I.
Section II.

Change 5

M122/M122A1 MACHINE GUN TRIPOD MOUNT

Unit Maintenance Instructions .................................................................. 6-1
Direct Support Maintenance Instructions ................................................. 6-5
M3 TRIPOD MOUNT
Unit Maintenance ..................................................................................... 7-1
Direct Support Maintenance Instructions ................................................. 7-3
M66 MACHINE GUN MOUNT RING
Unit Maintenance Instructions .................................................................. 8-1
Direct Support Maintenance Instructions ................................................. 8-5

Illus/
Figure

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Table of Contents (cont)
Page
CHAPTER 9.

Section I.
Section II.
CHAPTER 10.
Section I.
Section II.
CHAPTER 11.
Section I.
Section II.
CHAPTER 12.

M240E1 FLEXIBLE MACHINE GUN MOUNT AND

MOUNT ASSEMBLY FOR M122 TRIPOD MOUNT AND
M240G MACHINE GUN
Unit Maintenance Instructions.................................................................. 9-1
Direct Support Maintenance Instructions ................................................. 9-3
M142 MACHINE GUN MOUNT
Unit Maintenance Instructions.................................................................. 10-1
Direct Support Maintenance Instructions ................................................. 10-2
6650 .50 CAL MACHINE MOUNT
Unit Maintenance Instructions.................................................................. 11-1
Direct Support Maintenance Instructions ................................................. 11-2
M548 MACHINE GUN MOUNT

Section I.
Section II.

Unit Maintenance Instructions.................................................................. 12-1

Direction Support Maintenance Instructions ............................................ 12-2

CHAPTER 13.

MK93 MOD 0 MACHINE GUN MOUNT

(U.S. MARINE CORPS ONLY)................................................................ 13-1

CHAPTER 14.

MK93 MOD 1 MACHINE GUN MOUNT

Section I.
Section II.
CHAPTER 15.
Section I.
Section II.
CHAPTER 16.

Unit Maintenance Instructions.................................................................. 14-1

Direct Support Maintenance Instructions ................................................. 14-7
M6 MACHINE GUN PEDESTAL MOUNT
Unit Maintenance Instructions.................................................................. 15-1
Direct Support Maintenance Instructions ................................................. 15-7
M197 MACHINE GUN MOUNT

Section I.
Section II.

Unit Maintenance Instructions.................................................................. 16-1

Direct Support Maintenance Instructions ................................................. 16-5

APPENDIX A.

REFERENCES......................................................................................... A-1

APPENDIX B.

MAINTENANCE ALLOCATION CHART (MAC)

Section I.
Section II.
Section III.
Section IV.

Illus/
Figure

Introduction .............................................................................................. B-1

Maintenance Allocation Chart for Gun Mounts ........................................ B-4
Tool and Test Equipment Requirements for Gun Mounts ....................... B-9
Remarks................................................................................................... B-9

Change 5

iii

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Table of Contents (cont)

Page
APPENDIX C.

UNIT AND DIRECT SUPPORT MAINTENANCE REPAIR

PARTS AND SPECIAL TOOLS LIST

Section I.
Section II.

Introduction .............................................................................................. C-1

Repair Parts List ...................................................................................... C-1-1

Group 00

M122 Machine Gun Tripod Mount, 7790723 and

M1221A1 Machine Gun Tripod Mount, 12976949 (Assembled View) .... C-1-1

C-1

M122 Machine Gun Tripod Mount, 7790723 and

M122A1 Machine Gun Tripod Mount, 12976949..................................... C-2-1

C-2

Group 02

Tripod Leg Assembly, 7790948 ............................................................... C-3-1

C-3

Group 01

Elevating and Traversing Mechanism Assembly (Traversing and

Clamping Unit), 7791119 ......................................................................... C-4-1
Elevating and Traversing Mechanism Assembly
(Elevating Unit), 7791119 ........................................................................ C-5-1

C-5

Group 03
Group 0202

Pintle, Mount, 11010408 .......................................................................... C-6-1

Pintle Lock Assembly, 6108986............................................................... C-7-1

C-6
C-7

Group 00
Group 00
Group 00

M3 Machine Gun Tripod Mount, 8403398 (Assembled View) ................. C-8-1

M3 Machine Gun Tripod Mount, 8403398 ............................................... C-9-1
M3 Machine Gun Tripod Mount, 8403398
and
Bearing Assembly Head, 8448211
and
Machine Bolt, 6108395 ............................................................................ C-10-1
Tripod Mount Leg, 6507137 (Left Rear) .................................................. C-11-1
Tripod Mount Leg, 5559423 (Front)......................................................... C-12-1
Tripod Mount Leg, 6507136 (Right Rear) ................................................ C-13-1
Elevation Mechanism (Traversing and Clamping Unit), 5574621 ........... C-14-1
Elevation Mechanism (Lower and Upper Elevation Unit),5574621 ......... C-15-1
Pintle Mount Latch, 6108402 ................................................................... C-16-1

C-8
C-9

Group 00

Group 01

Group 01
Group 02
Group 03
Group 04
Group 05
Group 06
Group 06
Group 07
Group 00
Group 00
Group 01
Group 0101
Group 01
Group 0102
Group 0103

Illus/
Figure

Change 5

M66 Machine Gun Mount Ring, 7102810 (Assembled View).................. C-17-1

M66 Machine Gun Mount Ring, 7102810 ................................................ C-18-1
Ring Assembly, 7012727
and
Ring Assembly, 7012725 ......................................................................... C-19-1
Ring Assembly, 7012727
and
Ring, 7070704.......................................................................................... C-20-1
Ring Brake, 7012801 ............................................................................... C-21-1

C-4

C-10
C-11
C-12
C-13
C-14
C-15
C-16
C-17
C-18

C-19

C-20
C-21

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Table of Contents (cont)

Page
Group 00

Illus/
Figure

Group 0101
Group 02
Group 03
Group 04

M240E1 Flexible Mount Assembly, 12597090

(Assembled View)
and
Flexible Mount Assembly, 12976940....................................................... C-22-1
M240E1 Flexible Mount Assembly, 12597090
and
Flexible Mount Assembly, 12976940....................................................... C-23-1
Upper Cradle Assembly, 12597091 ........................................................ C-24-1
M142 Machine Gun Mount, 10900945 (Assembled View) ..................... C-25-1
M142 Machine Gun Mount, 10900945
and
Platform Assembly, 10900947................................................................. C-26-1
6650 .50 Cal Machine Gun Mount, 7046650 (Assembled View) ............ C-27-1
6650 .50 Cal Machine Gun Mount, 7046650 .......................................... C-28-1
M548 Machine Gun Mount, 11631740-2 (Assembled View) .................. C-29-1
M548 Machine Gun Mount, 11631740-2 .................................................
(Legs and Attaching Hardware) .............................................................. C-30-1
MK93 Mod 1 Machine Gun Mount, 6650717
and
MK93 Mod 0 Machine Gun Mount, 6650450 (Assembled Views) ........... C-31-1
MK93 Mod 0 Machine Gun Mount, 6650450
and
Yoke Assembly, 6650725 ....................................................................... C-32-1
Carriage Assembly, 6650434
and
Depression Stop Assembly, 6650651 ..................................................... C-33-1
.50 Caliber Ammo Holder Assembly, 6650724 ....................................... C-34-1
Bracket, Mounting, 12929150 ................................................................. C-35-1
Catch Bag Assembly, 6650723 .............................................................. C-36-1

Group 05

Universal Pintle Adapter, 12012061

Group 0501

Traverse Arm Assembly, 6650488

Group 0502
Group 00
Group 00

and
Body Assembly, 12012062 ..................................................................... C-37-1
M6 Machine Gun Pedestal Mount 12956270 (Assembled View) ........... C-38-1
M6 Machine Gun Pedestal Mount 12956270 ......................................... C-39-1

C-37
C-38
C-39

Group 00
Group 00

M197 Machine Gun Mount 12956264 (Assembled View) ...................... C-40-1

M197 Machine Gun Mount 12956264 ..................................................... C-41-1

C-40
C-41

Group 01
Group 02
Group 03
Group 04
Group 05
Group 06
Group 07

Travel Lock Assembly 12956265-2 ........................................................ C-42-1

Travel Lock Bracket Assembly 5830063 ................................................ C-43-1
Pintle Adapter Assembly 5830131 .......................................................... C-44-1
Mount Pintle 11010408 ............................................................................ C-45-1
Mount Pintle Assembly 12986102 ........................................................... C-46-1
Ammo Adapter Bracket Assembly and Deflector 12986106 ................... C-47-1
M60 Gun Mount Adapter ......................................................................... C-48-1

C-42
C-43
C-44
C-45
C-46
C-47
C-48

Group 9999

Bulk Items ............................................................................................... Bulk-1

Group 00

Group 01
Group 00
Group 00
Group 01
Group 00
Group 00
Group 00
Group 00
Group 00

Group 00
Group 02
Group 01

C-22

C-23
C-24
C-25

C-26
C-27
C-28
C-29
C-30

C-31

C-32

C-33
C-34
C-35
C-36

and

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Table of Contents (cont)
Page
APPENDIX C.

Illus/
Figure

UNIT AND DIRECT SUPPORT MAINTENANCE REPAIR PARTS

AND SPECIAL TOOLS LIST (RPSTL) (cont)

Section IV.

APPENDIX D.
Section I.
Section II.
APPENDIX E.
Section I
Section II.
APPENDIX F.
Section I
Section II.

Cross-Reference Indexes ....................................................................... I-1

Figure and item Number Index ............................................................... I-1
Part Number Index .................................................................................. I-11
National Stock Number Index ................................................................. I-20
BASIC ISSUE ITEMS
Introduction ............................................................................................. D-1
Basic Issue Items List ............................................................................. D-2
EXPENDABLE AND DURABLE ITEMS LIST
Introduction ............................................................................................. E-1
Expendable and Durable Items List ........................................................ E-1
ADDITIONAL AUTHORIZATION LIST (AAL)
Introduction ............................................................................................. F-1
Additional Authorization List (AAL) ......................................................... F-2
HOW TO USE THIS MANUAL

This manual contains operator's, unit, and direct support maintenance procedures for the various gun mounts.
Chapter 1 contains general information; equipment description and data; and principles of operation. Chapter 2
contains operating instructions and operator preventive maintenance checks and services (PMCS). Chapter 3
contains operator maintenance. Chapter 4 contains unit PMCS and troubleshooting. Chapter 5 contains direct
support troubleshooting. Chapters 6 through 16 contain unit and direct support maintenance for the various gun
mounts.
Be sure to read and understand maintenance instructions before beginning any maintenance task.

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

CHAPTER 1
INTRODUCTION
Section I. GENERAL INFORMATION
1-1.

SCOPE

Type of Manual: Operator, Unit, and Direct Support Maintenance.

Model Number and Equipment Name: Gun Mounts.

1-2.

MAINTENANCE FORMS, RECORDS, AND REPORTS

Department of the Army forms and procedures used for equipment maintenance will be those prescribed by
DA PAM 738-750, The Army Maintenance Management System (TAMMS). Marine Corps personnel will
use TM 4700-15/1, Equipment Record Procedures.

1-3.

DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE

Refer to TM 750-244-6.

1-4.

PREPARATION FOR STORAGE AND SHIPMENT

Refer to paragraph 4-7.

1-5.

OFFICIAL NOMENCLATURE, NAMES, AND DESIGNATIONS

NOMENCLATURE CROSS-REFERENCE LIST

Common Name

Official Nomenclature

Equilibrator spring......................................................................
Flexible wire...............................................................................
Helical torsion spring ................................................................
Mechanism assembly ................................................................
Pintle lock cap ...........................................................................
Quick release pin assembly ......................................................
Remote control lever .................................................................
Retaining pin..............................................................................
Roller bearing ............................................................................
Seal............................................................................................
Shock absorber mounting bracket.............................................
Traversing and elevating mechanism........................................

Torsion spiral spring

Nonelectrical wire
Torsion helical spring
Elevating and traversing mechanism
Pintle socket cap
Quick-release pin
Manual control lever
Spring pin
Plain solid disk
Mechanical felt
Mounting bracket
Elevating and traversing mechanism

1-6.

REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR)

If your gun mounts need improvement, let us know. Send us an EIR. You, the user, are the only one who can tell
us what you dont like about your equipment. Let us know why you dont like the design or performance. Put it on
an SF 368 (Product Quality Deficiency Report). Mail it to us at: ATTN: AMSTA-AR-QAW (C), TACOM-ARDEC, 1
Rock Island Arsenal, Rock Island, IL 61299-7300. Well send you a reply. Air Force users submit Materiel
Deficiency Report (MDR) to: Dir Mat Mgt Robins AFB GA//MMQC// and Quality Deficiency report to: Dir Mat Mgt
Robins AFB GA//MMQC// IAW Technical Order 00-35D-54, Technical Manual, USAF, Materiel Deficiency
Reporting and Investigating System.
Change 5

1-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

1-6.

REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR) (cont)

Marine Corps personnel, submit SF 368 to Commander (Code 808-1), Marine Corps Logistics Bases,
Albany, GA 31704-5000 in accordance with MCO 4855.10 (Quality Deficiency Report).

1-7.

CORROSION PREVENTION AND CONTROL

a.
Corrosion prevention and control (CPC) of Army materiel is a continuing concern. It is important that
any corrosion problems with this item be reported so that the problem can be corrected and improvements can be
made to prevent the problem in future items.
b.
While corrosion is typically associated with rusting of metals, it can also include deterioration of other
materials such as rubber and plastic. Unusual cracking, softening, swelling, or breaking of these materials may
be a corrosion problem.
c.
If a corrosion problem is identified, it can be reported using a SF 368, Product Quality Deficiency
Report. Use of keywords such as corrosion," rust, deterioration, or cracking will assure that the
information is identified as a CPC problem.
d.
Submit the form to: Commander, US. Army Armament Research, Development and Engineering Center,
ATTN: AMSTA-AR-QAW (R)/Customer Feedback Center, Rock Island, IL 61299-7300. Air Force users submit
Materiel Deficiency Report (MDR) to: Dir Mat Mgt Robins AFB GA//MMQC// IAW Technical Order 00-35D-54,
Technical Manual, USAF, Materiel Deficiency Reporting and Investigating System.

Section II. EQUIPMENT DESCRIPTION AND DATA

1-8.

EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES

M122/M122A1 Machine Gun Tripod Mount.

(1) Component assembly designed as defensive ground mounting for M60 machine gun, M240B/M240G
machine gun, and M249 squad automatic weapon system (SAWS).
(2) Composed of a folding tripod, pintle, and traversing and elevating mechanism.
(3) Flexible mount for use with M240B/M240G machine gun.
b.

M3 Machine Gun Tripod Mount.

(1) Component assembly designed as defensive ground mounting for M2 machine gun and MK19
machine gun.
(2) Composed of a folding tripod, pintle, and traversing and elevating mechanism.
c.

M66 Machine Gun Mount Ring.

(1) Ring mounts are component assemblies designed for installation on trucks or combat vehicles to
support a machine gun mount. Cab support structures are separate and must be acquired from HQ, TACOM, for
individual vehicles.
(2) Composed of a pintle socket, pintle clamping screw, ring assembly, and brake assembly.

1-2

Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
d. M240E1 Flexible Machine Gun Mount.
(1) Component assembly upon which a machine gun is directly mounted.
(2) Composed of a cradle, pintle, ammunition box tray, and securing pins or latches.
(3) Purpose is to hold a machine gun and ammunition and provide the capability to elevate, depress, and
traverse the machine gun.
(4) Should be installed into a pintle socket of a post, pedestal, ring, or cupola mount located on the
vehicle.
e. M142 Machine Gun Mount.
(1) Component assembly upon which a machine gun is directly mounted.
(2) Composed of a cradle, pintle, ammunition box tray, and securing pins or latches.
(3) Purpose is to hold a machine gun and ammunition and provide the capability to elevate, depress, and
traverse the machine gun.
(4) Should be installed into a pintle socket of a post, pedestal, ring, or cupola mount located on the
vehicle.
f.

6650 .50 Cal Machine Gun Mount.

(1) Component assembly upon which a machine gun is directly mounted.
(2) Composed of a cradle, pintle, ammunition box tray, and securing pins or latches.
(3) Purpose is to hold a machine gun and ammunition and provide the capability to elevate, depress, and
traverse the machine gun.
(4) Should be installed into a pintle socket of a post, pedestal, ring, or cupola mount located on the
vehicle.
g. M548 Machine Gun Mount.
(1) Component assembly designed as attaching device for mounting the M66 ring on the M548 carrier.
(2) Composed of four support legs, two with spare ammo can holders, and attaching hardware for the
carrier and the M66 ring.
h. MK93 MOD 0 Machine Gun Mount.
(1) Component assembly designed as a defensive ground mount for the MK19 MOD 3 and M2 HB
machine guns onto the M3 tripod.
(2) Composed of a carriage assembly and yoke assembly.
i.

MK93 MOD 1 Machine Gun Mount.

(1) Component assembly designed as a defensive ground mount for the MK19 MOD 3 and M2 HB
machine guns onto the HMMWV ring assembly.
(2) Composed of MK93 MOD 0 machine gun mount, .50 caliber ammo holder assembly, mounting
bracket, catch bag assembly, universal pintle adapter (UPA), and traverse and elevation mechanism (T&E).

Change 4

1-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
j.

M6 Machine Gun Pedestal Mount.

(1) Component assembly designed as attaching device for mounting the M60, M249, and M240B
machine gun on the M998/M1038/M1097 High Mobility Multipurpose Wheeled Vehicle (HMMWV) (Cargo/Troop
Carrier series of HMMWVs).
(2) Composed of a base plate, column assembly, and securing pins and latches.
(3) Purpose is to hold an M60, M249, or M240B machine gun and ammunition and provide the capability
to elevate, depress, and traverse the machine gun.
k. M197 Machine Gun Mount.
(1) Component assembly designed to attach M60, M249 and M240B machine guns to the M6 gun
pedestal or the M1025/M1026/M1114 High Mobility Multipurpose Wheeled Vehicle (HMMWV) (Armament
Carrier).
(2) Composed of travel lock assembly, travel lock bracket assembly, pintle adapter assembly, and a
pintle (Mount Pintle or Pintle Assembly ( for the M249 and M240B only)).
(3) The deflector kit is an additional item authorized for support of the M240B machine gun (see
Additional Authorization List (AAL) appendix F).
(4) Travel lock components and the M122 Pintle are additional items authorized for support of the M60
(see Additional Authorization List (AAL) appendix F).

1-9. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS

Not applicable.

1-10. DIFFERENCES BETWEEN MODELS

a. Machine Gun Mounts. Machine gun mounts differ in a combination of the cradle assembly, pintle
assembly, and ammunition tray. The cradle assemblies differ in design to fit and support the different models of
machine guns and corresponding ammunition trays. Pintle assemblies differ in the type of mounting shank. Pintle
assemblies with the straight type shank are designed to fit the pintle socket on ring mounts.
b. Gun Mount Pedestals. Gun mount pedestals differ only in the design of the column and braces. Each
gun mount pedestal is designed to be installed on a different model 1/4 ton truck. Pintle sockets on all gun mount
pedestals are designed to fit machine gun mounts with the stepped pedestal shanks.
c.

Gun Mount Rings

(1) Gun mount rings differ in design of the ring assemblies, pintle sockets, brake assemblies, and
mounting supports. One type is a solid ring assembly and the other is a multiple ring assembly. The solid type ring
has a carriage assembly with the pintle socket for the straight type machine gun mount and pintle shank. The
brake is located on the carriage which travels around the ring.
(2) The multiple type ring has a fixed ring for mounting to the vehicle, a revolving ring which carries the
pintle socket for the stepped type machine gun mount and pintle shanks, a brake assembly, and a backrest
assembly. The M66 ring is a multiple ring type mount.
(3) The M548 carrier uses the M66 ring with attaching supports from the M548 mounting kit. The M66
ring is capable of mounting the M2 machine gun using the 6650 pintle mount or the M60 machine gun using the
M142 pintle mount.

1-4

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

1-11. EQUIPMENT DATA

Machine Gun Mounts.

(1)

M142 Machine Gun Mount (8426671)

Weight ......................................................................................................
Elevation ...................................................................................................
Depression ................................................................................................
Traverse ...................................................................................................
(2)

M122/M122A1

Machine Gun Tripod Mount (7790723/12976949)

Weight - M122 ..........................................................................................

M122A1 .....................................................................................
Elevation - (free gun) ................................................................................
(locked (T&E)) ........................................................................
Depression - (free gun) ............................................................................
(locked (T&E)) .....................................................................
Traverse - (free gun) ................................................................................
(w/traversing bar) ...................................................................
(3)

18.00 lb (8.16 kg)

+60 degrees
. 5 degrees
360 degrees

M142 Machine Gun Mount (10900945)

44.00 lb (19.96 kg)

+5.6 degrees
. 14 degrees
360 degrees
45 degrees

M240E1 Flexible Machine Gun Mount (12597090)

Weight ......................................................................................................
Elevation ...................................................................................................
Depression ...............................................................................................
Traverse ...................................................................................................
(5)

15.00 lb (6.80 kg)

33.00 lb (14.97 kg)
+21 degrees
+19 degrees
. 45 degrees
. 25 degrees
360 degrees
50 degrees

M3 Machine Gun Tripod Mount (8403398)

Weight ......................................................................................................
Elevation ...................................................................................................
Depression ...............................................................................................
Traverse- (free gun) .................................................................................
(locked (T&E)) ..........................................................................
(4)

95.00 lb (43.09 kg)

+80 degrees
20 degrees
360 degrees

6650.50

30.00 lb (13.61 kg)

+80 degrees
20 degrees
360 degrees

Cal Machine Gun Mount (7046650)

40. 00 1b (18.14 kg)

+80 degrees
20 degrees
360 degrees

Change 3

1-4.1/(1-4.2

blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

(7) M548 Machine Gun Mount (11631740-2)

Weight .........................................................................................................
Traverse ......................................................................................................

324.00 lb (146.97 kg)

360 degrees

(8) MK93 MOD 0 Machine Gun Mount (6650450) (USMC Only)

Weight .........................................................................................................
Elevation ......................................................................................................
Depression ...................................................................................................

30.00 lb (13.61 kg)

+67 degrees
27 degrees

(9) MK93 MOD 1 Machine Gun Mount (6650717)

135.00 lb (61.23 kg)

+67 degrees
27 degrees

(110) M197 Machine Gun Mount (112956264)

15.00 lb (6.80 kg)

360 degrees

Gun Mount Ring.

M66 Machine Gun Mount Ring
Weight .........................................................................................................
Traverse ......................................................................................................

Gun Mount

Pedestal.

M6 Machine

Gun Pedestal

Mount

300.00 lb (136.08 kg)

360 degrees

(12956270)

104.00 lb (47.17 kg)

+34 degrees
20 degrees
360 degrees

Change 3

1-5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Section III. PRINCIPLESOF OPERATION

1-12.

PRINCIPLES OF OPERATION

r
"

M122A1
FLEXIBLEMOUNT

M122
PINTLE

TRAVERSING
AND
ELEVATING
MECHANISM

HEAD/
ASSEMBLY

a. M122/M122A1 Machine Gun Tripod Mount.

(1) Traversing and elevating mechanism. The bar and bearing assembly head serve as a rear
support for traversing and elevating mechanism, which in turn supports the M60/M240B/M240G/M249
machine
gun. M1 22/Ml 22A1 tripod mount has a double, screw-type traversing and elevating mechanism. The upper screw
is attached to the yoke, which is connected to the M60/M240B/M240G/M249
machine gun
by the quick release pin through the holes in the rear mounting lugs of the receiver assembly. A scale shows 250
mils in depression and 100 mils in elevation. A setscrew fastens the elevating handwheel to the upper elevating
screw, permitting the handwheel graduations to be synchronized with those on the screw. The traversing sleeve
and screw are clamped in place on the bar by the traversing slide lock lever. The traversing sleeve is properly
mounted when the lock lever is to the rear and the traversing handwheel is positioned to the left. The traversing
and elevating mechanism requires an adapter for the M60 and M249 machine guns.
(2) The M122 tripod has three tubular folding legs connected at the head assembly. The rear legs are
joined together by the traversing bar assembly. The head assembly furnishes a front support for the machine gun
through a pintle attached to the machine gun and the tripod.
(3) The M122A1 similar to the M122, utilizes the flexible mount for the M240B and M240G machine guns.
The flexible mount replaces the pintle and provides soft recoil capability.

1-6

Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
1-12.

PRINCIPLES OF OPERATION (cont)

TRAVERSINGAND
ELEVATING MECHANISM

FRONTLEG

BEARINGASSEMBLY
HEAD

M3 Tripod Mount.

(1) Traversing and elevating mechanism. The traversing bar assembly serves as a rear support for
traversing and elevating mechanism, which in turn supports the M2 machine gun. The M3 tripod has a
double, screw-type traversing and elevating mechanism. The upper screw is attached to the yoke, which is
connected to the M2 machine gun by the guide release pin through the holes in the rear mounting lugs of
the receiver assembly. A scale shows 250 mils in depression and 100 mils in elevation. A setscrew fastens
the elevating handwheel to the upper elevating screw, permitting the handwheel elevations to be
synchronized with those on the screw. The traversing sleeve and screw are clamped in place on the bar by
the traversing slide lock lever. The traversing sleeve is properly mounted when the lock lever is to the rear
and the traversing handwheel is positioned to the left.
(2) Front leg and bearing assembly head. The M3 tripod mount has three telescoping tubular legs
connected at the bearing assembly head. The rear legs are joined together and supported by the bar. The
bearing assembly head furnishes a front support for the mounted M2 machine gun which is supported by
the front leg.
TRAVERSE
LOCK

BEARING
ASSEMBLY

UPPER
RACEI
C.

M66 Machine Gun Mount Ring.

Upper race rotates 360 degrees and contains a bearing assembly which receives pintles of the
M142 or the 6650 mount. Has traverse lock which prevents the rotation of ring.

1-6.1/1-6.2 blank

Change 2

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322
TRAVERSINGAND
ELEVATINGMECHANISM

FRONTLEG

BEARINGASSEMBLY
HEAD

M3TripodMount.

(1) Traversingand elevatingmechanism.Thetraversingbar assemblyservesas a rearsupportfor

traversing and elevating mechanism, which in turn supports the M2 machine gun. The M3 tripod mount has a
double, screw-type traversing and elevating mechanism. The upper screw is attached to the yoke, which is
connected to the M2 machine gun by the guide release pin through the holes in the rear mounting lugs of the
receiver assembly. A scale shows 250 mils in depression and 100 mils in elevation. A setscrew fastens the
elevating handwheel to the upper elevating screw, permitting the handwheel graduations to be synchronized with
those on the screw. The traversing sleeve and screw are clamped in place on the bar by the traversing slide lock
lever. The traversing sleeve is properly mounted when the lock lever is to the rear and the traversing handwheel
is positioned to the left.
(2) Front leg and bearing assembly head. The M3 tripod mount has three telescopic tubular legs
connected at the bearing assembly head. The rear legs are joined together and supported by the bar. The
bearing assembly head furnishes a front support for the mounted M2 machine gun which is supported by the front
leg.

TRAVERSE
LOCK
BEARING
ASSEMBLY

UPPER
RACE

c.
M66 Machine Gun Mount Ring. Upper race rotates 360 degrees and contains a bearing assembly
which receives pintles of the M142 or the 6650 mount. Has traverse lock which prevents the rotation of ring.

Change 1

1-7

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIRFORCET.O. 11W2-8-1-322

1-12. PRINCIPLES OF OPERATION (cont)

PLATFORM
PINTLE

AMMUNITION
BOXASSEMBLY

d. M240E1FlexibleMachineGunMount. Platformand pintlefor the M240E1machinegun.Platformhas

dual spring shocks which dampen recoil of the machine gun. Pintle is attached to the platform and allows for
insertion into sockets on armored vehicles and gives 360 degree traverse capability. Ammunition box assembly
attached to left side for belted ammo feed ease.

PLATFORM

PINTLE

M142 Machine Gun Mount. Platform and pintle for mounting M60/M249 machine gun to a vehicle
e.
socket. Platform supports the machine gun and attaches to the pintle, which gives the mount 360 degree rotation
when inserted in the vehicle socket. Socket can be a permanent part of the vehicle or part of M66 ring or M548
mount. See ammunition box assembly for location of belted ammunition can.
1-8

Change 1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

AMMUNITION
CAN
SUPPORTASSEMBLY
PLATFORM

PINTLE
f
6650.50
Cal Machine Gun Mount. Platform and pintle for mounting M2 machine gun to a vehicle
socket. Platform, which has a built-in recoil dampening device, supports the machine gun and attaches
to the pintle, which gives the mount 360 degree rotation when inserted in the vehicle socket. Socket can
be a permanent part of the vehicle or part of M66 ring or M548 mount. Not to be used on the M4
pedestal. Left side mounted ammo can support assembly for positioning belted ammo for feeding to
machine gun.

BEARING ASSEMBLY

TRAVERSE
LOCK

UPPER RACE

g. M548 Machine Gun Mount. Upper race rotates 360 degrees and contains a bearing assembly which
receives pintles of the M142 or the 6650 mount. Has traverse lock which prevents the rotation of ring.
Has four support legs for mounting to the M548 ammunition carrier.

1-9

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
1-12.

PRINCIPLES OF OPERATION (cont)

CARRIAGE
ASSEMBLY

YOKE ASSEMBLY

MK93 MOD 0 Machine Gun Mount.

(1) The MK93 MOD 0 provides a means of traversing and elevating an installed weapon. It
can be configured to mount either the MK19 MOD 3 40mm grenade machine gun or the M2 heavy barrel
(HB) .50 caliber machine gun. No modification to either weapon is required when changing from one gun
configuration to the other. The MK93 MOD 0 consists of a carriage assembly and yoke.
(2) The MK93 MOD 0 has a small bolt-on pintle which allows it to be used in the standard
small sockets (i.e., M3 tripod mount or universal pintle adapter).
.50 CALIBER AMMO
HOLDER ASSEMBLY
J

MOUNTING
BRACKET

MK93 MOD 0
MACHINE GUN MOUNT

TRAVERSE AND
ELEVATION MECHANISM

CATCH BAC
ASSEMBLY

UNIVERSAL PINTLE
ADAPTER

1-10

Change 4

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
i.

MK93 MOD 1 Machine Gun Mount.

(1) The MK93 MOD 1 includes the MK93 MOD 0 machine gun mount, mounting bracket, .50 caliber
ammo holder assembly, traverse and elevation mechanism, universal pintle adapter, catch bag assembly, and
travel lock assembly.
(2) The MK93 MOD 1 includes a spent cartridge case and link catch bag which will hold approximately
96 40mm or 400 .50 caliber spent cartridge cases and links. The catch bag has a side opening which allows for
easy clean out without removing the entire assembly. The side opening may be left open during combat to
prevent buildup of rounds under the mount which might prevent the gun from firing.
(3) The MK93 MOD 1 has an attaching ammunition can support bracket which allows either the .50
caliber ammo holder assembly or the mounting bracket for 40mm ammunition to be mounted.

j. M6 Machine Gun Pedestal Mount. Universal pedestal mount whose operational effectiveness is
dependent upon the weapon characteristics of the gun installed. However, the operation of the mount does have
two specific characteristics, which are described below:
(1) Internal Column Assembly. This assembly is raised or lowered manually by the operator and has
provisions for locking the firing positions desired in predetermined increments.
(2) Retaining Clamp Assembly. The retaining clamp assembly is located in the pintle socket of the
internal column assembly. This assembly serves to lock the pintle adapter assembly of the M197 machine gun
mount, used with the M6 machine gun pedestal mount, in the traverse position, and also prevents any upward
movement which would allow disengagement from the pintle socket.

Change 4

1-11

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

1-12.

PRINCIPLES OF OPERATION (cont)

M O
P IN
P /N
(M 2

U N
T L
1 2
4 9
E

T
9 8 6 1 0 2
a n d M 2 4 0 B )

P IN T L E
A D A P T E R
A S S E M B L Y

M O U N T P IN T L E
M 6 0
R E F E R T O A A L .
T R A V E L L O C K
B R A C K E T
A S S E M B L Y

T R A V E L
L O C K
A S S E M B L Y
A M M
B R A C K
A N D
R E F

O
E T
D E
E R

A D
A
F L
T

A P T E
S S E M
E C T O
O A A L

R
B L Y
R
.

G U N M O U N T
A D A P T E R
R E F E R T O A A L .

k. M197 Machine Gun Mount.

(1) The M197 machine gun mount includes a pintle adapter assembly and a mount pintle (for M249 and
M240B only), travel lock bracket assembly, and travel lock assembly.
(2) Can be used with M6 machine gun pedestal mount to mount and secure M249 and M240B machine
gun with appropriate AAL items for the M60 and M240B.

1-12

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

CHAPTER 2
OPERATING INSTRUCTIONS
Section I. DESCRIPTION AND USE OF
OPERATOR'S CONTROLS AND INDICATORS
2-1.

GENERAL

This section describes the various controls and provides the operator/crew
proper operation of the various mounts.

2-2.

sufficient information to ensure the

MACHINE GUN MOUNT CONTROLS

Machine gun mount controls are the items of the mounts necessary for the operator to install and secure a
a.
machine gun on the mount. Additional controls are such items as travel lock pins, which are installed through the
pintle and the cradle to hold the machine gun and mount in a horizontal position. The travel lock pin must be
removed before the operator can elevate or depress the machine gun.
The 6650 .50 cal machine gun mount has, in addition to the travel lock pin, a travel lock tie bar which is
b.
spring-operated. The bar is attached to the pintle and connects to the lower portion of the cradle. The machine gun
and cradle must be moved to maximum depression and the operator must lift up the spring-loaded tie bar. Then
the operator must insert the end of the tie bar into the forward end of the channel located on the bottom of the
cradle. Holding the tie bar in the channel, the operator must elevate the machine gun and cradle to a horizontal
position. To release the mount tie bar from the cradle, the operator must move the machine gun and cradle to
maximum depression. The spring-loaded tie bar will then disengage from the cradle and the mount will be free for
operation.
(1) This mount also has a spring-loaded equilibrator. The equilibrator, when adjusted properly, will
counter-balance the weight of the machine gun and a box of ammunition. It should hold the machine gun in a
horizontal position.
(2) The ammunition tray assembly has a cam lock, which holds the tray in position on the cradle.
The pressure foot is to be set on top of the ammunition and will prevent the ammunition from failing out of the box
when the mount is at maximum elevation.
Machine gun mounts, for M60 machine guns, have a platform with a hook and a latch to retain the
C.
machine gun to the mount. The latch is spring-loaded and must be depressed when removing the machine gun
from the mount.
The MK93 MOD 0/MK93 MOD 1 machine gun mount, when an M2 machine gun is installed, has the
d.
safety and spade grips located on the machine gun backplate. When an MK19 MOD 3 machine gun is installed,
the safety and spade grips are located on the machine gun.
When the M6 machine gun pedestal mount is mounted in M998/M1038/M1097
HMMWVs, an installed
e.
M60 or M249 machine gun will be secured with the travel lock assembly from the M197 gun mount.

Change 3

2-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR
FORCE
T.O. 11W2-8-1-322

Section II. OPERATOR PREVENTIVE MAINTENANCE

CHECKS AND SERVICES (PMCS)
2-3.

INTRODUCTION TO PMCS TABLE

soyoucankeepyourequipment
in good
a. General.YourPMCStable(table2-1)hasbeenprovided
operating condition and ready for its primary mission.
b. Warnings and cautions. Always observe the WARNINGS and CAUTIONS appearing in your PMCS table
BEFORE, DURING, and AFTER you operate the equipment. The warnings and cautions appear before certain
procedures. You must observe these WARNINGS and CAUTIONS to prevent serious injury to yourself and others
or to prevent your equipment from being damaged.
c.

Explanation

of table entries.

(1) Item Number column. Numbers in this column are for reference. When completing DA Form 2404,
Equipment Inspection and Maintenance Worksheet, include the item number for the check/service indicating a
fault. Item numbers also appear in the order that you must do checks and services for the intervals listed.
(2) Interval column. This column tells you when you must do the procedure in the procedure column.
BEFORE procedures must be done before you operate or use the equipment for its intended mission. DURING
procedures must be done during the time you are operating or using the equipment for its intended mission.
AFTER procedures must be done immediately after you have operated or used the equipment.
(3) Item to Check/Service column. This column provides the location and the item to be checked or
serviced.
(4) Procedure column. This column gives the procedure you must do to check or service the item listed
in the Item to Check/Service column to know if the equipment is ready or available for its intended mission or for
operation. You must do the procedure at the time stated in the interval column.
(5) Not Fully Mission Capable If: column. Information in this column tells you what faults will keep your
equipment from being capable of performing its primary mission. If you make check and service procedures that
show faults listed in this column, do not operate the equipment. Follow standard operating procedures for
maintaining the equipment or reporting equipment failure.
Table 2-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES

ITEM
NO.

INTERVAL

Before

2-2

ITEM TO CHECK/
SERVICE

Change 3

Machine Gun
Mounts

PROCEDURE
a. Check machine gun mounts; make
certain they are clean and lubricated.
b. Check pins and chains; make sure they
are properly installed and chains are
secure.
c. Check for proper installation of
ammunition tray.

NOT FULLY
MISSION CAPABLE
IF:
Parts broken or
missing.
Pins broken or
missing.
Parts broken or
missing.

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Table 2-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (cont)
ITEM
NO.

INTERVAL

ITEM TO CHECK/
SERVICE

PROCEDURE
d. Check elevating, depression, and
traversing.

Check condition and installation of

cover.

On MK93 MOD 1, check for tears in

casings bag, bends in catch bag frame,
and Velcro wear on casings bag.
Check for legibility of markings on
adjustable arm and traverse bar of
universal pintle adapter.

Before

Tripod Mounts

Gun Mount Rings

Pedestal Mounts

NOTFULLY
MISSION CAPABLE
IF:
Mount does not
elevate, depress, or
traverse through full
range.

Casings bag torn,

catch bag frame
bent, or Velcro will
not close.
Markings on
adjustable arm, or
traverse bar are
illegible.

Emplace tripod mount. Ensure legs are

properly separated and make contact to
the side of tripod head to ensure rigidity
of mount. Pintle must be secured to
tripod head by pintle lock assembly.

Inoperable legs.
Pintle lock is
inoperative.

Check handwheels for binding and ease

of operation. Check for missing parts.
Check the scales for cleanness and
legibility.

Broken, binding,
worn, or missing
parts.

Check mounts; make certain they are

clean and lubricated.

Parts broken or
missing.

Check operation of pintle clamping

screw; make certain it locks machine
gun mount, preventing traversing.

Screw missing or
fails to lock pintle
mount.

Check operation of brake assembly;

make certain it locks the traverse of the
carriage or ring.

Parts missing or
brake fails to lock
carriage or ring.

Check nuts, bolts, pins, and screws;

make certain they are secure.

Parts broken or
missing.

Check condition and of cover.

Check pedestal mounts; make certain

they are clean, lubricated, and free of
damage.

Parts broken or
missing.

Check pins and chains; make certain

they are properly installed and chains
are secure.

Pins broken or
missing.

Change 4 2-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Table 2-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (cont)
ITEM TO CHECK/
SERVICE

NOT FULLY
MISSION CAPABLE
IF:

ITEM
NO.

INTERVAL

4
(cont)

Before
(cont)

Pedestal Mounts
(cont)

Check elevating, depression,

traversing.

After

Machine Gun
Mounts

Check machine gun mounts; make

certain they are clean and lubricated.

Parts broken or
missing

Check pins and chains; make certain

they are properly installed and chains
are secure.

Pins broken or
missing

Check for proper installation of

ammunition tray.

Parts broken or
missing.

Check elevating, depression,

traversing.

Mount does not

elevate, depress, or
traverse through full
range.

Check condition and installation of

cover.

Check for missing, broken, or loose leg

clamps. Check for missing, broken, or
inoperative sleeve lock latch. Clean and
lubricate tripod mount. Check pintle
lock assembly.

Missing, broken, or
loose leg clamps.
Inoperative sleeve
lock latch. Pintle will
not secure to tripod
head.

Check quick release pin for burrs and

corrosion. Check for missing parts.
Check handwheels for ease of
operation. Check traversing and
elevating scales for legibility.

Will not elevate or

traverse.

Clean and lubricate tripod, traversing

and elevating mechanism assembly,
and pintle assembly.

Inspect traversing bar assembly for

tightness when legs are extended.
Make sure sleeve latch operates freely.
Make sure traversing handwheels
operate freely. Be sure all scale
readings are legible and zero indexes
line up (FM 23-67).

After

2-4

Change 4

Tripod Mount

PROCEDURE
and

and

Mount does not

elevate, depress, or
traverse through full
range.

Sleeve latch does not

operate freely.
Traversing handwheels do not
operate freely. Scale
readings are illegible
or zero indexes do
not align.

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Table 2-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (cont)

ITEM
NO.

INTERVAL

After

ITEM TO CHECK/
SERVICE
Gun Mount Rings

Pedestal Mounts

M197 Machine
Gun Mount

MK93 MOD 0
Machine Gun
Mount

NOTFULLY
MISSION CAPABLE
IF:

PROCEDURE
a. Check mounts; make certain they are
clean and lubricated.

Parts broken or
missing.

Check operation of pintle clamping

screw; make certain it locks machine
gun mount, preventing traversing.

Screw missing or
fails to lock pintle
mount.

Check operation of brake assembly;

make certain it locks the traverse of the
carriage or ring.

Parts missing or
brake fails to lock
carriage or ring.

Check nuts, bolts, pins, and screws;

make certain they are secure.

Parts broken or
missing.

Check condition of cover.

Check pedestal mounts; make certain

they are clean, lubricated, and free of
damage.

Parts broken or
missing.

Check pins and wire cords; make

certain they are properly installed and
wire cords are secure.

Pins broken or
missing.

Check elevating, depression,

traversing.

Mount does not

elevate, depress, or
traverse through full
range.

Clean all accessible surfaces with a dry

rag (item 8, appx E). Preserve
unpainted metal with PL-S (item 7,
appx E).

Check for defects including broken wire

cords, damaged bracket, damaged
threads, or missing nuts, washers, or
screws.

Parts broken or
missing.

Check mount; make certain it is clean

and properly lubricated.

Parts broken or
missing.

b. Check elevating, depression,

traversing.

and

Mount does not

elevate, traverse, or
depress through full
range.

Change 3 2-5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Table 2-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (cont)

ITEM TO CHECK/
SERVICE

NOTFULLY
MISSION CAPABLE
IF:

ITEM
NO.

INTERVAL

10
(cont)

After
(cont)

MK93 MOD 0
Machine Gun
Mount (cont)

Check yoke assembly for broken or

missing parts. Yoke assembly must
maintain positive retention of weapon.

Parts broken or
missing. Yoke
assembly does not
provide positive
retention.

After

MK93 MOD 1
Machine Gun
Mount

Check mount; make certain it is clean

and properly lubricated.

Parts broken or
missing.

Check elevating, depression,

traversing.

Mount does not

elevate, traverse, or
depress through full
range.

Check yoke assembly for broken or

missing parts. Yoke assembly must
maintain positive retention of the
universal pintle adapter.

PROCEDURE

Section Ill. OPERATION

2-4.

ASSEMBLY

AND PREPARATION

and

Parts broken or
missing. Yoke
assembly does not
provide positive
retention.

UNDER USUAL CONDITIONS

FOR USE

Installation

of Machine Gun Mount.

(1)

Perform before operation PMCS (table 2-1) on machine gun mount, pedestal, and ring mount.

(2)

Loosen pintle clamping screw, located on the pintle socket of the pedestal mount or ring

mount.
(3) Install the pintle of the machine gun mount into the pintle socket and tighten the pintle
clamping screw until the machine gun mount will not traverse in the socket.
(4)

On ring mounts, lock the brake assembly to prevent the ring mount from traversing.

(5)

Align the holes in the cradle and pintle and insert the travel lock pin.

(6) Install the ammunition tray assembly on the machine gun mount by aligning the tray guides
with the cradle guides and lower the tray on to the mount

2-6

Change 4

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(7) Installation of M197 machine gun mount on:

NOTE
When installing the M197, Unit Maintenance support is required.
When used in conjunction with the M249 or M240B, use mount pintle, P/N 12986102 (5).
When used in conjunction with the M60, use mount pintle P/N 11010408 (6).
(a)

M6 Machine Gun Pedestal Mount:

$
!
#
!
"

Loosen retaining clamp assembly (1) by turning handle on M6 machine gun pedestal mount
1
(2) counterclockwise.
2

Install pintle adapter assembly (3) into M6 machine gun pedestal mount (2).

3
Turn handle of retaining clamp assembly (1) clockwise to lock pintle adapter assembly (3) in
place. Pull up on pintle adapter assembly to ensure it is secure.
4

Remove quick release pin (4) from pintle adapter assembly (3).

Install mount pintle (5), or mount pintle (6) in pintle adapter assembly (3).

Insert quick release pin (4).

7
Twist and pull up on the installed mount pintle (5), or mount pintle (6). It should be locked
into pintle adapter assembly (3), but should traverse freely left and right.
WARNING
For use with M240B when mounted on the M1025/M1026 armament carrier series, install deflector kit
(see Additional Authorization List (AAL), appendix F) and ammo adapter bracket assembly and deflector.
Use of deflector kit helps prevent hot brass from falling onto the driver.
NOTE
Maintenance procedures for the ammo adapter bracket assembly and deflector are found in TM 9-1005313-23&P (M240B).
Change 5

2-7

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

2-4.

ASSEMBLY AND PREPARATION FOR USE (cont)

!
'

M O U N T

P IN T L E
P /N 1 2 9 8 6 1 0 2

8
Remove two machine bolts (7) and two lockwashers (8) and separate travel lock bracket
assembly (9) into two halves (10).
9
Install two halves (10) of travel lock bracket assembly (9) on structural tube (11) with travel
lock bracket assembly (9) holes facing rear of HMMWV. Secure by installing two lockwashers (8) and two
machine bolts (7).
10 Remove self-locking nut (12), two flat washers (13), and hexagon head capscrew (14) from
travel lock bracket (15).
11 Align mounting holes in travel lock bracket (15) with mounting holes in travel lock bracket
assembly (9), and install two flat washers (13), hexagon head capscrew (14), and self-locking nut (12).

(b)

M1025/M1026/M1114 HMMWV:

Loosen four set screws on

1
HMMWV pintle adapter (16).
2
Install pintle adapter assembly
(17) and secure by tightening four set screws.
3
Install applicable mount pintle
(18) P/N 11010408 or 12986102 and attach travel
lock bracket (19) on HMMWV pintle adapter
assembly (17) following steps (7) (a) 4 thru
(7) (a) 11.

2-8

Change 5

$
S E T S C R E W S

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(c)

Deflector Kit and Ammo Adapter Bracket Assembly and Deflector:

1
Install deflector plate (20) and secure to ammo adapter bracket assembly (21) with two cap
screws (22) and two nuts (23).
NOTE
Nuts (23) must be held within the ammo adapter bracket assembly (21) and deflector plate (20)
weldment, while installing cap screws (22) to secure deflector plate (20).

Change 5

2-8.1/(2-8.2 blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P11
AIR FORCE T.O. 11W2-8-1-322
b.

Installation of Machine Gun.

WARNING

It is essential that operational procedures for the machine gun be followed before
installing on a mount. Dangerous procedures such as mounting, dismounting, cleaning,
repairing, or operating a machine gun on a mount without first having knowledge of the
operation of the machine gun and all safety precautions to be followed could result in
injury or death to personnel. DO NOT attempt to mount or dismount or inspect or repair
a mounted machine gun without first clearing the machine gun chamber and feedways of
ammunition.
(1)

Installation of .50 Cal Machine Gun on MK 93 MOD 1 Machine Gun Mount.

2
3

(a)

Loosen HMMWV adapter bolts (3).

(b)

Mount universal pintle adapter (1) in HMMWV adapter (2), and tighten adapter bolts (3).

(c)

Install mount pintle (4) into universal pintle adapter (1).

(d)

Install quick-release

pin (5) to secure universal pintle adapter (1) and mount pintle (4).

Change 4 2-9

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
2-4

ASSEMBLY AND PREPARATION FOR USE (cont)

(e) Align thumbscrew (6) on ammo holder assembly (7) with corresponding bottom slot in
sideplate of carriage assembly (8). Push up and align studs with corresponding holes in sideplate down
until studs stop. Tighten thumbscrew.
(f) Turn shock absorber assemblies

(9) to upright position.

(g) Ensure rear slider assembly (10) is "up".

8
12
15
14

16
(h) Install catch bag assembly (11) from right side while pushing catch bag frame (12) forward
into carriage assembly (8). Align catch bag assembly with holes in carriage assembly. Install quickrelease pin (13) and seal Velcro.

2-10 Change 4

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(i) Install elevation mechanism (14) by placing quick-release pin (15) through corresponding
holes beneath carriage assembly (8). Pull lever down to lock elevation mechanism on azimuth indicator
(16).

20
Install .50 caliber machine gun by aligning front mounting holes with the corresponding
in front slide assemblies. Install front M2 quick-release pin (17).
(k)

holes

Install rear M2 quick-release pin (18) through weapon and rear slider assembly.

NOTE
A semi-free weapon can be achieved with the elevation mechanism attached by turning
the thumbscrew on the traverse arm assembly counterclockwise and turning the manual
control handle two full revolutions. This allows manual elevation/depression
and azimuth
change without unlocking HMMWV ring.
(2)

Installation of .50 Cal Machine Gun on Other Gun Mounts.

(a) Position the machine gun in the cradle, align the front mounting hole of the machine gun
with the front mounting hole of the cradle, and insert the front securing pin.
(b) Align the rear mounting hole of the machine gun with the rear mounting hole in the cradle
and insert rear securing pin.
(3)

Installation of M60 Machine Gun.

(a) Place the machine gun into the cradle with the forearm over the platform and engage the
forearm hole over the platform hook.
(b)

Push the machine gun forward and down on the butt stock.

(c) Press the platform catch open to engage the machine gun mounting pin and release the
platform catch to close the mounting pin of the machine gun.

Change 4 2-11

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
2-4.

ASSEMBLY AND PREPARATION FOR USE (cont)

(4)

Installation of MK19 Grenade Machine Gun on MK93 MOD 1 Machine Gun Mount.

(a)

Loosen HMMWV adapter bolts (3).

(b)

Mount universal pintle adapter (1) in HMMWV ring socket (2), and tighten adapter bolts (3).

(c)

Install mount pintle (4) into universal pintle adapter (1).

(d)

Install quick-release pin (5) to secure universal pintle adapter (1) and mount pintle (4).
8
10

9
6

(e) Align thumbscrew (5) on mounting bracket (7) with corresponding slot in slideplate of
carriage assembly (8). Push up and align studs with corresponding holes in sideplate. Push down until
studs stop. Tighten thumbscrew.
(f) Turn shock absorber assemblies (9) to downward position.
(g) Ensure rear slider assembly (10) is "down", rear .50 caliber pin assembly is installed through
the bushing and stowage bracket, and detent balls are secure and clearly visible.

2-12

Change 4

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

(h) Install catch bag assembly (11) from right side while pushing catch bag frame (12) forward into
carriage assembly (8). Align catch bag assembly with holes in carriage assembly. Install quick-release pin (13)
and seal Velcro.
(i)
Install elevation mechanism (14) by placing quick-release pin (15) through corresponding holes
beneath carriage assembly (8). Pull lever down to lock elevation mechanism on azimuth indicator (16).
(j)
Install MK19 grenade machine gun by sliding its locking channels into the forward mounting pins
on carriage assembly. Ensure sear assembly aligns with upper rear holes in carriage assembly.
(k)

Install rear quick-release pin through the carriage assembly and sear.

NOTE
A semi-free weapon can be achieved with the elevation mechanism attached by
turning the thumbscrew on the traverse arm assembly counterclockwise and
turning the manual control handle two full revolutions. This allows manual
elevation/depression and azimuth change without unlocking HMMWV ring.
c. Installation of Ammunition and Box.
(1) Installation of Ammunition Trays on .50 Cal Mounts.
(a)

Remove the cover from the ammunition box.

(b)

Lift and rotate the pressure straps.

(c)

Place the ammunition and box into the tray.

(d)

Lower the pressure traps to hold the ammunition in the ammunition box.

Change 3

2-13

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

2-4.

ASSEMBLY AND PREPARATION FOR USE (cont)

(2) Installation of Ammunition Box Container Assembly on .50 Cal Machine Gun Mount.
(a)

Unlatch the door assembly.

(b)

Lift the pressure foot and cover assembly upward.

(c)

Place a box of ammunition with the cover removed into the tray.

(d)

Lower the cover assembly with pressure foot on the ammunition.

(e)

Close and latch the door.

(3) Installation of Ammunition Tray on M60 Machine Gun Mounts.

(a)

Remove the box cover.

(b)

Place the box end under the tray hook.

(c) Push the box downward on the tray, allowing the tray hook to engage over the end of the box.
The hook retains the box in the tray.
d. Installation of M6 Machine Gun Pedestal Mount in M998/M1038/M1097 HMMWV (Cargo/Troop
Carrier).
WARNING

The M6 Pedestal Mount is heavy. A minimum of two personnel are required to lift
and install the mount in the vehicle.

When installing the M6 Pedestal Mount nuts and bolts under cargo bed ensure
vehicle exhaust system is cool to the touch to prevent burns.
NOTE

When installing the M6, Unit Maintenance support is required.

If your vehicle has threaded inserts welded under the cargo bed, perform steps (1) and
(2). If your vehicle does not have threaded inserts, go to step (3). One assistant will be
needed.

Hardware removed in steps (1) thru (4) are components of the HMMWV and cannot be
requisitioned separately using this manual. Use care not to lose or damage hardware.

(1) Remove three bolts (1) and three rear tiedowns (2) from cargo bed (3).
2-14

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

(2)

Remove two bolts (4) and two bulkhead brackets (5) from cargo bed (3). Go to step (5).

1W
2@7T-_
7,)----------

(3) Remove three self-locking nuts (6), three flat washers (7), three bolts (1), and three rear
tie-downs (2) from cargo bed (3).
4
<

5
9

3
9
8

(4) Remove two self-locking nuts (8), two lockwashers (9), two bolts (4), and two bulkhead brackets (5)
from cargo bed (3).

Change 3

2-15

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

2-4.

ASSEMBLY

AND PREPARATION

FOR USE (cont)

(5) Loosen two bolts (10) on each side of driver's compartment and raise bulkhead assembly (11) to
provide clearance for M6 machine gun pedestal mount and lightly tighten two bolts (10) on each side.

13
14
15
5

17
12

brackets

2-16

(6) Remove two bolts (12) two nuts (13) four washers (14), four lockwashers (17), two bulkhead
5) and two front tieclowns (15) from bulkhead (16).

Change 3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

20
k\

20
19

WARNING
M6 machine gun pedestal mount is heavy. At least two persons should be used to lift it
into the vehicle.
(7)

Slide M6 machine gun pedestal mount into cargo bed (3).

NOTE
If holes in mount weldment frame (18) do not line up with holes in cargo bed (3), new
holes may be drilled in mount weldment frame to a maximum of 0.75 in. (1.91 cm).
(8)

Align mounting holes in mount weldment frame (18) with holes in cargo bed (3).
NOTE

If your vehicle has threaded inserts welded under the cargo bed, perform step (9).
Discard self-locking nuts and lockwashers supplied with assembly kit.
If your vehicle does not have threaded inserts, go to step (10). One assistant will be
needed.
(9) Attach mount weldment frame (18) to cargo bed (3) using five flatwashers (19), and five
hexagon head capscrews; (20). Tighten securely. Go to step (11).

Change 3 2-17

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
2-4.

ASSEMBLY AND PREPARATION FOR USE (cont)

20
9

21
22
18

WARNING

Ensure

vehicle

is not operating

and all parts are cool to the touch before

proceeding.

(10)
Attach mount weldment frame (18) to cargo bed (3) using five hexagon head
capscrews (20), five flatwashers (19), five lockwashers (21), and five self-locking nuts (22). Tighten
securely.
NOTE
If the pedestal mount is installed for extended periods, a seal may be created to
prevent cartridges/cases from entering the space beneath the pedestal mount. Use
sealing compound, (Item 9, appx E) and touch up with olive drab enamel paint (Item
3, appx E).

(11) Loosen two bolts (10) on each side of driver compartment and lower bulkhead (16) until it
rests evenly on mount weldment frame. Tighten two bolts (10) on each side of driver's compartment
securing bulkhead in position.

2-18

Change 4

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

2-5.

OPERATING PROCEDURES

After loading and preparing machine gun for firing, loosen the pintle clamping screw enough to allow the
a.
gun mount to traverse in the pintle socket.
On ring mounts, release brake assembly and traverse the machine gun mount around the ring assembly
b.
to desired location and lock brake to prevent further movement in traverse.
Remove travel lock pin from machine gun mount and/or release the travel tie bar lock. The machine gun
c.
may be elevated, depressed, or traversed as required. On ring mounts, to change position of the machine gun
mount on the ring, release the brake and rotate the machine gun mount to the desired location and lock brake.
After clearing the machine gun, move the machine gun mount on ring assembly to desired location. Place
d.
travel lock pin into machine gun mount. Tighten pintle clamping screw until machine gun mount will not traverse in
the pintle socket.

2-6.

PREPARATION

FOR MOVEMENT
WARNING

Machine gun and mount may travel at a ready-loaded position with machine gun ready for action,
but only when an operator or gunner is present to control and operate the machine gun and mount
or as directed by the officer or NCO in charge.
Position machine gun mount in desired direction with travel lock pin in place. Tighten pintle clamping
a.
screw and/or lock the brake assembly of ring mounts.
b.

Install cover when required.

Install ammunition

in stowage trays and gun tray when directed.

Section IV. OPERATION

2-7.

UNDER UNUSUAL CONDITIONS

GENERAL

In addition to the normal preventive maintenance service, special care in cleaning and lubrication must be
a.
observed where extremes of temperature, humidity, and atmospheric conditions are present or anticipated. Proper
cleaning, lubrication, and storage and the use of oils and lubricants not only ensure proper operation and
functioning but also guard against excessive wear of the working parts and deterioration of the materiel.
When chronic failure of the materiel results from subjection to extreme conditions, report of such chronic
b.
failure should be made on DA Form 2407, Maintenance Request.

Change 3

2-19

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

2-8.

OPERATION IN EXTREME COLD WEATHER

Preparation for Cold-Weather Operation.

(1) Whenit is anticipated

thatthematerielwillbeoperatedincoldclimates,itwillbenecessary
toprepare
it for cold-weather operation. See chapter 3, section 1,for lubrication instructions. Before changing grade of
lubricant, it is necessary that the parts be disassembled sufficiently to permit complete removal of oil, grease, and
foreign matter.
(2) Cleanliness is imperative. Rust, dirt, gummed oil, and grease in the bearing clearance interfere with
proper distribution of lubricant, causing stiff action or a complete stoppage in cold weather.
b.

Cold-Weather Operating Instructions.

(1) Keep all parts clean. The mechanical procedures for cleaning the materiel are the same as for usual
conditions; however, certain precautions must be observed as outlined in (2) thru (6) below.
(2) In cold climates, contamination of lubricants with moisture from snow, rain, or condensation in partlyfilled containers is the source of many difficulties. Keep containers covered at all times and store in a warm place,
if possible.
(3) Leave no unpainted metal surfaces exposed without a protective film of lubricant.
(4) Make a thorough inspection and provide as much protection as possible for all parts. See that the
covers are properly installed and securely fastened. If possible, do not fold covers that are wet or frozen.
(5) When the materiel is protected with a cover, moisture may form on metal surfaces. To prevent rusting,
remove the cover daily and inspect all exposed surfaces for presence of moisture or ice. It moisture or ice is
found, clean the surface thoroughly, dry, and coat sparingly with preservative weapons lubricating oil (LAW) (item
5, appx E).
(6) Exercise the controls through their entire range, at intervals as required, to aid in keeping the controls
from freezing in place and to reduce the effort required to operate them.
2-9.

OPERATION

IN EXTREME HOT WEATHER

In hot climates, inspect and clean the materiel as frequently as required rather than at fixed intervals.

Clean and lubricate as soon as possible after operation to prevent corrosion.

2-20

Change 3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

2-10. OPERATION IN EXTREME DUSTY OR SANDY CONDITIONS

a.
Inspect and clean the materiel more frequently when operating under sandy or dusty conditions; however,
lubricant should be applied sparingly, as oil will collect dust and sand, which act as abrasives.
b.
Use particular care to keep sand and dust out of the mechanism when performing inspection, lubrication,
or adjustments and repairs.
Keep the materiel covered as much as the tactical situation permits. Make certain that the cover is in good
c.
condition and securely fastened.

2-11.

OPERATION

IN RAINY, HUMID, AND SALT AIR CONDITIONS

a.
The moisture in the atmosphere will emulsify the lubricants and destroy their corrosion-preventive
qualities. Therefore, perform inspection, cleaning, and lubrication more frequently and carefully. Salt in the air,
such as occurs in salt-water areas, adds to the corrosive activity of moisture. Salty atmosphere conditions require
extra precautions when inspecting, cleaning, and lubricating materiel.
b.

Inspect, clean, air, and dry canvas covers more frequently.

Change 3

2-21/(2-22

blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

CHAPTER 3
OPERATOR MAINTENANCE
Section 1. LUBRICATION INSTRUCTIONS
WARNING
Dry cleaning solvent is toxic and flammable. Use in well ventilated area. Avoid breathing the
vapors and keep away from ignition sources.
CAUTION
Do not mix lubricants
on the same gun mount at the same time. The gun mount
must be
thoroughly cleaned during change from one lubricant to another. Dry cleaning solvent (item 9,
appx E) is recommended for cleaning your gun mount during change from one lubricant to
another.
3-1.
a.

LUBRICATION

UNDER

USUAL

CONDITIONS

General.
(1) Clear ammunition from machine gun and remove machine gun from the machine gun mount.
(2) Remove ammunition tray (detachable type trays only).
(3) Remove the machine gun mount from the pintle socket.
(4) Thoroughly clean all components of the machine gun mount, pedestal mount, or gun mount rings.
(5) Wipe dry, and lubricate following the appropriate steps for each type of mount.

Machine Gun Mounts.

(1) Lubricate the securing pins, travel lock pin, trunnion bearing or screws, hinge pins, locking cam, and
guide grooves on the ammunition trays weekly with general purpose lubricating oil (item 7, appx E).
(2) Lubricate all exposed metal surfaces weekly with a light coat of general purpose lubricating oil (item 7,
appx E).
(3) Lubricate the pintle shank weekly with a light coat of automotive and artillery grease (item 4, appx E).
c.

Gun Mount

Rings

with Carriages.

(1) Lubricate
the pintle clamping
screw, carriage rollers, brake lever detents and springs, brake lever
screws, brake clamps, backrest pins, barrel clamps, backrest carriage connecting bolts, and rollers weekly with
general purpose lubricating oil (item 7, appx E).
(2) Lubricate all exposed metal surfaces of the track and carriage weekly with a light coat of general
purpose lubricating oil (item 7, appx E).
(3) Lubricate the inside of the pintle socket weekly with a light coat of automotive and artillery grease
(item 4, appx E).
3-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

3-1.
d.

LUBRICATION UNDER USUAL CONDITIONS (cont)

Gun Mount Rings without Carriages.

(1) Lubricate all moveable parts of the brake assemblies, pintle clamping screw, backrest pins, and barrel
clarr.p assemblies weekly with a light coat of general purpose lubricating oil (item 7, appx E).
(2) Lubricate mechanical felt as required with general purpose lubricating oil (item 7, appx E) to keep the
felt soft and pliable.
(3) Lubricate inside of pintle socket weekly with a light coat of automotive and artillery grease (item 4,
appx E).
e.

Pedestal Mounts.

(1) Lubricate the securing pins, travel lock pin, and hinge pins weekly with general purpose lubricating oil
(item 7, appx E).
(2) Lubricate all exposed metal surfaces weekly with a light coat of general purpose lubriacting oil (item 7,
appx E).

3-2.
a.

LUBRICATION

UNDER UNUSUAL CONDITIONS

Lubrication in Extreme Cold Weather.

(1) When operating in cold climates, the gun mounts should be thoroughly cleaned and dried. If possible,
cleaning and lubrication should be performed in a warm place.
(2) Lubrication/cleaning
intervals should be advanced to daily and the gun mounts operated through the
entire range frequently to help prevent freezing that may cause the mounts to become inoperative.
(3) Lubricate all points outlined in paragraph 3-1 when temperatures are 0 F (-18 C) or below with
weapons lubricating oil (item 5, appx E), except gear boxes, where automotive and artillery grease (item 4, appx
E) should be used.
b.

Lubrication

in Extreme Hot Weather.

When operating in hot climates, the coating of oil necessary for operation and preservation will dissipate
quickly. Frequent servicing is necessary. Use general purpose lubricating oil (item 7, appx E) at all points indicated
in paragraph 3-1, except the pintle shank, socket, and gear boxes, where automotive and artillery grease (item 4,
appx E) should be used.
c.

Lubrication

(1) When
will be necessary.

in Rainy,
operating

Humid,
in climates

and Salt Air Conditions.

consisting

of high humidity,

moisture,

or salt air, more frequent

servicing

(2) Lubricate all points indicated in paragraph 3-1 with general purpose lubricating oil (item 7, appx E),
except for those points requiring automotive and artillery grease (item 4, appx E).
(3) Lubricate as often as necessary to prevent corrosion.

3-2

Change 3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

Lubrication in Extreme Dusty or Sandy Conditions.

(1) When operating in dusty or sandy areas, it will be necessary to clean and lubricate more frequently.
Dust and sand collected by the lubricant will cause abrasive action on the components.
(2) Clean the gun mounts thoroughly and lubricate only the moving components. Do not lubricate the
entire exposed metal surfaces, as this would only collect dust and sand. Lubricate very sparingly with general
purpose lubricating oil (item 7, appx E). Refer to paragraph 3-1.

Section II. MAINTENANCE

3-3.

PROCEDURES

CLEANING

a.
Fill a suitable container with dry cleaning solvent (item 9, appx E). Using a bristle brush, clean dirt, grease,
and residue from all surfaces. Dry all surfaces with clean dry wiping rags (item 8, appx E).
CAUTION
When using abrasive cloth, make certain not to remove too much metal, as this will change the
dimension of components.
Using abrasive cloth (item 2, appx E), remove paint and rust from quick release and securing pins, sides
b.
of holes, pintle shanks, and sockets.
c.

Lubricate in accordance

with paragraph 3-1.

Change 3

3-3/(3-4 blank)

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIR FORCET.O. 11
W2-8-1-322

CHAPTER 4
UNIT MAINTENANCE
SectionI. REPAIRPARTS;TOOLS;SPECIALTOOLS;TEST,
MEASUREMENT,
ANDDIAGNOSTICEQUIPMENT(TMDE);
ANDSUPPORTEQUIPMENT
4-1.

COMMON TOOLS AND EQUIPMENT

For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment
(MTOE), CTA 50-970, or CTA 8-100, as applicable to your unit. Marine Corps units, refer to the unit's Equipment
Allowance File (EAF) and appropriate technical manuals.
4-2.

SPECIAL TOOLS, TMDE, AND SUPPORT

EQUIPMENT

Special tools, TMDE, and support equipment are listed in appendix B of this manual.
4-3.

REPAIR PARTS

Repair parts are listed and illustrated in appendix C of this manual.

Section II. SERVICE UPON RECEIPT

4-4.

SERVICE

UPON RECEIPT

OF MATERIEL

Upon receipt of materiel, it is the responsibility of the officer in charge to determine whether the materiel
a.
has been properly mounted and prepared for service by the supplying organization, and to be sure it is in condition to preform its function. For this purpose, inspect all assemblies, subassemblies, and accessories to be sure
they are properly assembled, secured, correctly adjusted, cleaned, and lubricated.
Make a record of all missing parts and equipment and any malfunctions.
b.
as quickly as possible.
c.

Deficiencies must be corrected

Before materiel is activated, perform the following procedures:

(1) Perform Operator PMCS. Refer to paragraph 2-3.
(2) Lubricate for appropriate climatic condition. Refer to paragraphs 3-1 and 3-2.
(3) Check for proper operation. Refer to paragraph 2-4.

4-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

Section III. UNIT PREVENTIVE MAINTENANCE

CHECKS AND SERVICES (PMCS)
4-5.

INTRODUCTION

TO PMCS TABLE

a.
General. Your PMCS table (table 4-1) has been provided so you can keep your equipment in good
operating condition and ready for its primary mission.
b.

Explanation

of table entries.

column.

This column provides the location and the item to be checked or

serviced.
(4) Procedure column. This column gives the procedure you must do to check or service the item
listed in the Item to Check/Service column to know if the equipment is ready or available for its intended mission
or for operation. You must do the procedure at the time stated in the Interval column.
(5) Not Fully Mission Capable If: column. Information in this column tells you what faults will keep
your equipment from being capable of performing its primary mission. If you make check and service procedures
that show faults listed in this column, do not operate the equipment. Follow standard operating procedures for
maintaining the equipment or reporting equipment failure.

Table 4-1. UNIT PREVENTIVE

ITEM
NO.

INTERVAL

Quarterly

4-2

MAINTENANCE

ITEM TO CHECK/
SERVICE

Machine Gun
Mounts

CHECKS

AND SERVICES

FOR GUN MOUNTS

PROCEDURE

NOT FULLY
MISSION CAPABLE
IF:

Check all gun mounts: make

certain they are clean and lubricated.

Parts are broken

or missing.

Check for operating elevation,

depression, and traversing.

Mount does not

operate through
full required
range of movement.

Check all controls, make sure they

function properly.

Mount controls
malfunction.

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

Table 4-1. UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES FOR GUN MOUNTS (cont)

ITEM
NO.

INTERVAL

ITEM TO CHECK/
SERVICE

PROCEDURE

NOT FULLY
MISSION CAPABLE
IF:

d. Check cover; make sure it is clean,

serviceable, and properly installed or
stowed.

Quarterly

Tripod Mounts

e. Check mounts with equilibrators by

checking adjustment of equilibrator
with machine gun mounted.

Equilibrators
adjustment
inoperable.

f. Check for MWO application. See DA

PAM 25-30. If no MWO is used,
Marine Corps Units check the SL1 -2
for applicable MIs or TIs.

MWOs not applied

per directives.

a. Check functioning of legs, sleeve lock

latch, and pintle lock assembly.

Leg clamp loose.

Sleeve lock latch
inoperative. Pintle
will not latch to
tripod head. Parts
are broken or
missing.

b. Check components
and distortion.

Mount does not

operate through
full required range
of movement.
Mount controls
malfunction.

for dents, cracks,

out of

c. Check handle and nut for retention on

legs and wear or distortion of threads.
d. Check rear legs for full extension.
Rear legs should be forced apart by
bar when in firing position.

Legs are inoperable. Legs do not

contact side of tripod mount to
ensure rigidity of
mount.

e. Check machine bolt (5139973) and

nut for damaged threads or burrs.
f. Check head for cracks or burrs.

4-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

4-5.

INTRODUCTION TO PMCS TABLE (cont)

Table 4-1. UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES FOR GUN MOUNTS (cont)

ITEM
NO.

INTERVAL

ITEM TO CHECK/
SERVICE

NOT FULLY
MISSION CAPABLE
IF:

PROCEDURE
g. Inspect general appearance of tripod.
Check for damaged components and
make sure it operates properly. Refer
to FM 23-67.

Parts are broken

or missing.

h. Make sure traversing and elevating

mechanism moves freely.
i. Inspect lock assembly, pintle
assembly, and helical torsion spring.

Parts are broken

or missing.

j. Extend the legs and check latch for

wear and spring tension.

Latch is inoperative.

k. Make sure all identification

are legible.

Quarterly

Gun Mount Rings

markings

l. Check traversing mechanism for

broken elevating stop. If broken or
missing, notify direct support
maintenance.

Elevating stop
broken or
missing.

a. Check gun mount rings; make certain

they are clean and lubricated.

Parts are broken

or missing.

b. Check operation of pintle clamping

screw.

Clamping screw
missing or
inoperable.

c. Check traversing action of carriage or

ring.

Ring does not

traverse through
full required range.

d. Check cover; make certain it is clean,

serviceable, and properly installed or
stowed.
4

4-4

Quarterly

Change 3

Pedestal Mounts

a. Check pedestal mounts; make

certain they are clean and lubricated.

Parts are broken

or missing.

b. Check operation of raising,

lowering, and traversing.

Mount does not

operate through
full required range
of movement.

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

Section IV. UNIT TROUBLESHOOTING

4-6.

TROUBLESHOOTING INFORMATION

The malfunction index can be used as a quick guide to troubleshooting. Common malfunctions are listed
a.
in alphabetical order under each major assembly, with a page number reference to the troubleshooting table
where a test or inspection and corrective action are provided.
Table 4-2 lists the common malfunctions which you may find during operation or maintenance. You should
b.
perform the tests/inspections and corrective actions in the order listed.
This manual cannot list all malfunctions that may occur, nor all tests or inspections and corrective actions.
c.
If a malfunction is not listed or is not corrected by listed corrective actions, notify your supervisor.
d.

Refer to lubrication instructions

(para 3-1 ) for location of lubricating points.

UNIT MALFUNCTION

INDEX
Troubleshooting
Procedure
Page

GUN MOUNT RINGS

Brake lever will not stay in locked or unlocked position ............................................................................
Machine gun mount traverses when pintle screw is tightened ..................................................................
Machine gun mount will not install into pintle socket .................................................................................
Ring mount does not traverse properly .....................................................................................................
Ring mount will not traverse after brake is released .................................................................................

4-8
4-8
4-7
4-8
4-8

MACHINE GUN MOUNTS

Catch strike fails to hold machine gun to machine gun mount ..................................................................
Excessive effort must be made in order to elevate or depress machine gun mount ................................
Machine gun mount does not swivel smoothly ..........................................................................................
6650 .50 cal machine gun mount will not hold machine gun in a horizontal position ................................
Quick release and securing pins bind at installation .................................................................................

4-7
4-6
4-7
4-7
4-6

PEDESTAL MOUNTS
Excessive effort is required to raise or lower M6 machine gun pedestal mount ......................................
M6 machine gun pedestal mount does not swivel smoothly ....................................................................
Quick release and securing pins bind at installation ................................................................................

4-9
4-9
4-9

TRIPOD MOUNTS
Sleeve fails to lock on traversing bar assembly ........................................................................................
Tripod mount fails to traverse ....................................................................................................................

4-7
4-7

Change 3

4-5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Table 4-2. UNIT TROUBLESHOOTING

MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION

MACHINE GUN MOUNTS

QUICK RELEASE AND SECURING PINS BIND AT INSTALLATION.

Check for dirt, paint, rust, and burrs on pins or in sides of holes.

EXCESSIVE

Remove dirt, paint, rust, and burrs.

Lubricate cleaned areas.

EFFORT MUST BE MADE IN ORDER TO ELEVATE OR DEPRESS MACHINE

Check grooved headless straight pin/headless

GUN MOUNT.

straight pin/bolt for dirt, rust, and burrs.

Remove dirt, dust, and burrs.

Lubricate cleaned areas.

CATCH STRIKE FAILS TO HOLD MACHINE GUN TO M142 MACHINE GUN MOUNT.
Check catch strike for worn or broken helical torsion spring.
Notify direct support maintenance.

6650.50

CAL MACHINE

GUN MOUNT WILL NOT HOLD MACHINE

Check for broken torsion spiral spring or incorrect adjustment.

Notify direct support maintenance.
5.

MACHINE GUN MOUNT DOES NOT SWIVEL SMOOTHLY.

Check pintle socket for dirt, paint, and burrs.

4-6

Remove dirt, paint, and burrs.

Lubricate cleaned areas.

GUN IN A HORIZONTAL

POSITION.

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

Table 4-2. UNIT TROUBLESHOOTING (cont)

MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION

TRIPOD MOUNTS
6.

TRIPOD MOUNT FAILS TO TRAVERSE.

Check for incorrect adjustment of traversing screw.
Notify direct support maintenance.

SLEEVE FAILS TO LOCK ON TRAVERSING

BAR ASSEMBLY.

Check for incorrect adjustment of lever and traversing screw.

Notify direct support maintenance.
GUN MOUNT RINGS
8.

MACHINE GUN MOUNT WILL NOT INSTALL INTO PINTLE SOCKET.

Check for dirt, paint, rust, and burrs in pinfle socket.

Remove dirt, paint, rust, and burrs.

Lubricate cleaned areas.

MACHINE GUN MOUNT TRAVERSES

WHEN PINTLE SCREW IS TIGHTENED.

Check for broken pintle screw.

Notify direct support maintenance.
10. RING MOUNT DOES NOT TRAVERSE

PROPERLY.

Step 1. Check track, separator segments, and roller bearings for dirt, paint, rust, and burrs.

Step 2

Remove dirt, paint, rust, and burrs.

Lubricate cleaned areas.

Check brake assembly for proper adjustment.

Notify direct support maintenance.

4-7

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-11-322

Table 4-2. UNIT TROUBLESHOOTING (cont)

MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION

11. BRAKE LEVER WILL NOT STAY IN LOCKED OR UNLOCKED POSITION.

Step 1. Check detent and detent spring for dirt and rust.

Step 2.

Remove dirt and rust.

Lubricate cleaned areas.

Check for broken detent spring.

Notify direct support maintenance.

12. RING MOUNT WILL NOT TRAVERSE

AFTER BRAKE IS RELEASED.

Check brake for proper adjustment.

Notify direct support maintenance.
PEDESTAL
13. QUICK RELEASE

AND SECURING

MOUNTS

PINS BIND AT INSTALLATION.

Check for dirt, paint, rust, and burrs on pins or in sides of holes.

14. EXCESSIVE

Remove dirt, paint, rust, and burrs.

Lubricate cleaned areas.

EFFORT IS REQUIRED TO RAISE OR LOWER M6 MACHINE GUN PEDESTAL

Check quick internal column for dirt, rust, and burrs.

Remove dirt, rust, and burrs.

Lubricate cleaned areas.

15. MACHINE GUN DOES NOT SWIVEL SMOOTHLY.

Check pintle socket for dirt, paint, and burrs.

4-8

Change 3

Remove dirt, paint, and burrs.

Lubricate cleaned areas.

MOUNT.

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

Section V. PREPARATION FOR STORAGE OR SHIPMENT

4-7.
a.

PREPARATION FOR STORAGE OR SHIPMENT

General.

(1) This section establishes standards for overseas shipment (preembarkation inspectioncriteria) or
domestic issue of mounts. These standards are provided to ensure that the user is furnished equipment which will
perform its mission without early failure or major maintenance problems.
(2) The standards prescribed in table 4-3 provide for a high percentage of remaining life in affected
equipment. Equipment designated for overseas shipment or domestic issue must qualify under the standard
prescribed before it can be approved for such issue and/or shipping action. The term "Domestic Issue" covers the
transfer of equipment between major commands (e.g., transfer of equipment between National Guard and Army).
For additional information and procedures for administrative storage
b.
Administrative Storage of Equipment. Marine Corps personnel will use MCO
Record of Transportation Discrepancies) for checking unpacked equipment.
Warehousing) and MCO P4790.2 (Administrative Storage of Equipment) for

of equipment, refer to TM 740-90-1,

P4610.19 (Transportation and Travel
Refer to MCO P4450.7 (Marine Corps
preparation of storage.

Section VI. PREEMBARKATION

INSPECTION OF MATERIAL IN UNITS
ALERTED FOR OVERSEAS MOVEMENT
4-8.

PREEMBARKATION

INSPECTION
Table 4-3. PREEMBARKATION

Standard

Item

MACHINE GUN MOUNTS

INSPECTION

Machine gun mounts must be complete. Make certain all components

in good condition.

The mounts must be clean, lubricated, and functional. Painted

components must be thoroughly covered to prevent corrosion.

Machine gun covers must be clean and functional with no damage.

Cracked welds and damaged and missing parts will be repaired or

replaced.

are

4-9

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

4-8.

PREEMBARKATION INSPECTION (cont)

Table 4-3. PREEMBARKATION INSPECTION (cont)

Item

GUN MOUNT RINGS

PEDESTAL

4-10

MOUNTS

Change 3

Standard

Gun mount rings must be complete. Make certain all components

good condition.

are in

The mounts must be clean, lubricated, and functional. Painted

components must be thoroughly covered to prevent corrosion.

Carriages and rotating rings must function smoothly.

Brake assemblies must function properly to lock and unlock the carriage
or rotating ring.

Pintle clamping screw must lock the gun mount to prevent traversing
when screw is tightened.

On mounts containing backrests, make certain the backrest is in good

condition with no damage.

Attaching hardware must be in good condition and tight.

Ring mount covers must be clean and functional, with no damage.

Cracked welds and damaged and missing parts will be repaired or

replaced.

Pedestal mounts must be complete.

in good condition.

The mounts must be clean, lubricated, and functional. Painted components must be thoroughly covered to prevent corrosion.

Internal column assembly must function smoothly.

Pintle clamping screw must lock the gun mount to prevent traversing
when screw is tightened.

Attaching hardware must be in good condition and tight.

Cracked welds and damaged and missing parts will be repaired or

replaced.

Make certain all components

are

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

CHAPTER
DIRECT SUPPORT

MAINTENANCE

DIRECT SUPPORT TROUBLESHOOTING

a.
The malfunction index can be used as a quick guide to troubleshooting.
Common malfunctions are listed
in alphabetical order under each major assembly, with a page number reference to the troubleshooting table
where a test or inspection and corrective action are provided.
Table 5-1 lists the common malfunctions which you may find during operation or maintenance.
b.
should perform the tests/inspections and corrective actions in the order listed.

You

This manual cannot list all malfunctions that may occur, nor all tests or inspections and corrective actions.
c.
If a malfunction is not listed or is not corrected by listed corrective actions, notify your supervisor.
d.

Refer to lubrication instructions

(para 3-1) for location of lubricating points.

DIRECT SUPPORT MALFUNCTION

INDEX
Troubleshooting
Procedure
Page

GUN MOUNT RINGS

Brake assembly fails to lock or unlock carriage or ring assembly ..........................................................
Brake lever will not stay in locked or unlocked position .........................................................................
Machine gun mount traverses when pintle screw is tightened ...............................................................
Ring mount does not traverse properly ..................................................................................................
MACHINE GUN MOUNTS
Catch strike fails to hold machine gun M142 to machine gun mount .....................................................
Machine gun mount will not install into pintle socket ..............................................................................
6650.50 cal machine gun will not hold machine gun in horizontal position when
travel lock pin is removed ...................................................................................................................
Travel lock pin, quick release pins, or securing pins bind at installation ................................................
TRIPOD MOUNTS
Front leg of M3 tripod mount tails to lock ...............................................................................................
Legs of M3 tripod mount fail to remain in locked position ......................................................................
Machine gun will not secure to mount ....................................................................................................
M2 machine gun does not secure properly to M3 tripod mount .................... I ........................................
M3 tripod mount fails to elevate ................................................................
............................................
M3 tripod mount fails to traverse ............................................................................................................
M 122 tripod mount fails to traverse ........................................................................................................

5-5
5-5
5-5
5-5

5-2
5-2
5-2
5-2

5-3
5-4
5-4
5-3
5-3
5-3
5-4

5-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-11-322
Table 5-1. DIRECT SUPPORT TROUBLESHOOTING

MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION

MACHINE GUN MOUNTS

1. MACHINE GUN MOUNT WILL NOT INSTALL INTO PINTLE SOCKET.
Check for damaged pintle shank.
Replace pintle. Refer to paragraph 7-3, 10-2, or 11-2.
2.

CATCH STRIKE FAILS TO HOLD MACHINE

GUN TO M142 MACHINE

GUN MOUNT.

Check catch strike for worn or broken helical torsion spring.

Replace worn or broken torsion helical spring.
3.

Step2.

Refer to paragraph

11-2.

Check for broken torsion spiral spring.

Replace and adjust torsion spiral spring.

TRAVEL LOCK PIN, QUICK RELEASE PINS, OR SECURING

Step 1.

Refer to paragraph 11-2.

PINS BIND AT INSTALLATION.

Check for din, paint, rust, and burrs on pins or in sides of hole.
Remove dirt, paint, rust, and burrs.

Step 2.

Check for bent pins.

Replace pins. Refer to paragraph

Step 3.

POSITION

Check torsion spiral spring for incorrect adjustment.

Adjust torsion spiral spring.

11-2.

Check for bent or warped cradle or pintle.

Replace cradle or pintle.

5-2

10-2.

6650.50 CAL MACHINE GUN MOUNT WILL NOT HOLD MACHINE GUN IN HORIZONTAL
WHEN TRAVEL LOCK PIN IS REMOVED.
Step 1.

Refer to paragraph

11-2.

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322
Table5-1. DIRECTSUPPORTTROUBLESHOOTING(cont)
MALFUNCTION
TESTOR INSPECTION
CORRECTIVEACTION
TRIPODMOUNTS
5. M3 TRIPODMOUNTFAILSTO TRAVERSE.
Checkfor defectivescrew assembly.
Replace traversing and elevating mechanism.
6.

Refer to paragraph 7-3.

M3 TRIPOD MOUNT FAILS TO ELEVATE.

Check for defective screw assembly.
Replace traversing and elevating mechanism. Refer to paragraph 7-3.

FRONT LEG OF M3 TRIPOD MOUNT FAILS TO LOCK.

Step 1. Check for defective front leg clamping screw nut.
Replace defective front leg clamping screw nut. Refer to paragraph 7-4.
Step 2. Check for damaged serrations on retaining plate.
Replace damaged retaining plate. Refer to paragraph 7-4.
Step 3.

Check for damaged serrations on upper front tripod mount leg.

Replace damaged upper front tripod mount leg. Refer to paragraph 7-6.

Step 4.

Check for distortion of front tripod mount leg.

Replace distorted front tripod mount leg. Refer to paragraph 7-6.

M2 MACHINE GUN DOES NOT SECURE PROPERLY TO M3 TRIPOD MOUNT.

Step 1. Check for defective mount pintle.
Replace defective mount pintle. Refer to paragraph 7-3.
Step 2.

Check for defective sleeve bearing in tripod head.

Replace tripod head. Refer to paragraph 7-4.

5-3

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Table 5-1. DIRECT SUPPORT TROUBLESHOOTING

(cont)

MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
9.

LEGS OF M3 TRIPOD MOUNT FAIL TO REMAIN IN LOCKED POSITION.

Step 1. Check for defective spring or lever.
Replace defective spring or lever. Refer to paragraphs 7-5, 7-6, and 7-7.
Step 2. Check for incorrect adjustment of traversing bar assembly.
Readjust bar. Refer to paragraph 7-3.

10. M122 TRIPOD MOUNT FAILS TO TRAVERSE.

Step 1. Check adjustment area of traversing and elevating assembly for movement.
Replace traversing and elevating assembly. Refer to paragraph 6-3.
Step 2.

Check clamping area of traversing and elevating mechanism assembly for broken or missing
parts.
Replace machine screw, lockwasher, traversing slide lock lever, helical torsion
spring, and traversing slide lock screw. Refer to paragraph 6-5.

Step 3.

Check traverse bar assembly for bends or dents.

Replace traverse bar assembly. Refer to paragraph 6-4.

11.

MACHINE GUN WILL NOT SECURE TO MOUNT.

Step 1. Check for bent or deformed lock release lever and headless grooved pin. Check helical
torsion spring for weak spring action.
Replace defective parts. Refer to paragraph 6-6.
Step 2.

Check traversing and elevating mechanism adapter assembly locking action.

Replace traversing and elevating mechanism adapter assembly. Refer to paragraph 6-3.

5-4

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Table 5-1. DIRECT SUPPORT TROUBLESHOOTING (cont)

MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
GUN MOUNT RINGS
12.

MACHINE GUN MOUNT TRAVERSES WHEN PINTLE SCREW IS TIGHTENED.

Step 1. Check for broken headless shoulder pin.
Replace headless shoulder pin. Refer to paragraph 8-4.
Step 2.

Check for broken pintle lock (M66).

Replace pintle lock. Refer to paragraph 8-4.

13.

BRAKE ASSEMBLY

FAILS TO LOCK OR UNLOCK

RING ASSEMBLY.

Check for broken clamps or brake shoe.

Rdplace clamp or brake shoe.
14.

Refer to paragraph 8-4.

BRAKE LEVER WILL NOT STAY IN LOCKED OR UNLOCKED

Step 1.

Step 2.

POSITION.

Check detent and detent spring for dirt and rust.

Remove dirt and rust.

Lubricate cleaned areas.

Check for broken detent spring.

Replace broken detent spriing. Refer to paragraph 8-5.

15.

RING MOUNT DOES NOT TRAVERSE

Step 1.

Step 2.

PROPERLY.

Check for frozen, dirty, or broken bearings and rollers.

Clean or replace bearings and rollers.

Lubricate bearings and rollers.

Check for warped ring assembly.

Replace ring mount.

Step 3.

Refer to paragraph 8-4.

Check for proper assembly and installation.

Properly assemble and install.

5-5/(5-6 blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

CHAPTER 6
M122/M122A1
Section
6-1.

MACHINE GUN TRIPOD MOUNT

1. UNIT MAINTENANCE

INSTRUCTIONS

M122/M122A1 MACHINE GUN TRIPOD MOUNT- MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

DISASSEMBLY
1

Release pintle lock assembly (10) and

remove mount pintle (7) (M122 only).

Remove one retaining clip (3) and remove

pin (4).

Remove flex mount (6) (M122A1 only) from

sleeve bushing (8) and the mechanism
assembly (5).

Turn traversing lever (2) counterclockwise and remove traversing and

elevating mechanism (1) from traverse
bar assembly (9).

7
8

INSPECTION/REPAIR

Inspect for broken, damaged, or missing

parts.

Traversing and elevating mechanism (1)

is a repairable assembly. Refer to
paragraph 6-2.

Mount pintle (7) is a repairable assembly.

Flex mount assembly (6) is a repairable assembly.

For further disassembly

Repair is by replacement of authorized parts (appx C).

10
@10

Refer to paragraph 6-3.

Refer to paragraph 9-1.

of tripod leg assembly, notify direct support maintenance.

Change 2 6-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

6-1.

M122/M122A1 MACHINE GUN TRIPOD MOUNTINSTRUCTIONS (cont)

MAINTENANCE

REASSEMBLY
1

Place mount pintle (7) (M122 only) in sleeve bushing (8) and lock pintle lock assembly (10).

Place traversing and elevating mechanism (1) on traverse bar assembly (9) and secure by turning
traversing lever (2) clockwise.

Place flex mount (6) (M122A1 only) in sleeve bushing (8) and on mechanism assembly (5) and lock
pintle lock assembly (10).

Install pin (4) and replace retaining clip (3).

4
6

3
5

2
7
8
9
10

6-2 Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11
2-8-1-322

6-2.

MECHANISM ASSEMBLY (TRAVERSING AND CLAMPING UNIT) MAINTENANCE INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx 13)
Materials/Parts
Lockwasher

( 11010413)

Equipment Condition
6-1 Traversing and elevating mechanism removed

DISASSEMBLY
Remove machine screw (6) and lockwasher (5) from
traversing lever (4). Discard lockwasher. Remove
traversing lever (4), helical torsion spring (3) and
machine screw (2) from elevating mechanism
sleeve (1).
INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

For further disassembly of mechanism assembly

(traversing and clamping unit), notify direct
support maintenance.

Repair is by replacement
(appx C).

of authorized

parts

4
5
6

REASSEMBLY
Install machine screw (2), helical torsion spring (3),
and traversing lever (4) on elevating mechanism
sleeve (1). Secure with new lockwasher (5) and
machine screw (6).
NOTE
Machine screw (6) will need to be adjusted
when traversing lever (4) is installed. Traversing
lever (4) must be aligned with traverse bar
assembly.

Change 2 6-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

16-3.

MOUNT PINTLE - MAINTENANCE INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx 13)
Personnel Required
2
Equipment Condition
6-3 Mount pintle removed

DISASSEMBLY
WARNING
To avoid injury to your eyes, use care when
removing and installing spring-foaded parts.

2
3

Remove headless grooved pin (1), helical torsion

spring (2), and lock-release lever (3) from pintle (4).
INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing

parts.

If pintle (4) is broken or damaged, repair

is by replacement of next higher assembly.

Repair is by replacement
parts (appx C).

of authorized

REASSEMBLY
NOTE
Have helper assist in reassembly of mount
pintle.
Install helical torsion spring (2) and lock-release
lever (3), and secure to pintle (4) with headless
grooved pin (1).

6-4

Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

SECTION II. DIRECT SUPPORT MAINTENANCE INSTRUCTIONS

6-4.

M122/M122A1 MACHINE GUN TRIPOD MOUNT AND TRAVERSING AND

ELEVATING MECHANISM MAINTENANCE INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx 13)
Small Arms Shop Set (item 1, appx 13)

DISASSEMBLY
1

Release pintle lock assembly (10) and

remove mount pintle (7) (M122 only).

Remove one retaining clip (3) and remove

pin (4).

Remove flex mount (6) (M122A1 only)

from sleeve bushing (8) and the
mechanism assembly (5).

4
6@1

Turn traversing lever (2) counterclockwise and remove traversing and

elevating mechanism (1) from traverse
bar assembly (8).

01 3

2
7
10N_

INSPECTION /REPAIR

Inspect for broken, damaged, or

missing parts.

For further disassembly of tripod leg

assembly, refer to paragraph 6-5.

Traversing and elevating mechanism assembly (1) is a repairable assembly.

paragraph 6-6.

Mount pintle (7) is a repairable assembly.

Flex mount (6) is a repairable assembly.

Repair is by replacement of authorized parts (appx C).

Refer to

Refer to paragraph 6-3.

Refer to paragraph 9-1.

Change 2 6-5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

6-4.

M122/M122A1 MACHINE GUN TRIPOD MOUNT AND TRAVERSING

ELEVATING MECHANISM MAINTENANCE INSTRUCTIONS (cont)

AND

REASSEMBLY
1

Place mount pintle (7) (M122 only) in sleeve bushing (8) and lock pintle lock assembly (10).

Place traversing and elevating mechanism (1) on traverse bar assembly (9) and secure by turning
traversing lever (2) clockwise.

Place flex mount (6) (M122A1 only) in sleeve bushing (8) and on mechanism assembly (5) and lock
pintle lock assembly (10).

Install pin (4) and replace retaining clip (3).

3
5

2
7
8
9
10

@10

6-6 Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

6-5.

TRIPOD LEG ASSEMBLY

- MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

c. Reassembly

b. Inspection/Repair

a. Disassembly
INITIAL SETUP

Tools and Special Tools

Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Bolt, machine (5169879)
Bolt, machine (2) (5169880)
Bolt, machine (2) (5169881)

Lockwasher (2) (11010529)

Nut, plain, hexagon (4) (MS51968-2)
Nut, plain, hexagon (3) (MS51968 8)
Equipment Condition
6-4 Traversing and elevating mechanism and pintle mount/flex mount removed
DISASSEMBLY
14

1)
1 2 1

23
911

10
4

8
15
22

1
13
11

7/
6

P
8
5
20

If damaged, remove two hex plain nuts (1), two machine bolts (2), and two sleeve spacers (3)
from head (4).
Change 2 6-7

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

16-5.

TRIPOD LEG ASSEMBLY - MAINTENANCE INSTRUCTIONS

WARNING
Make sure pintle lock assembly is in locked position before removing.

If damaged, remove two machine screws (5), two lockwashers

from head (4). Discard two lockwashers.

Remove two hex plain nuts (8), two machine bolts (9), and traverse bar assembly (10) from pintle
tripod mount legs (11 and 12).

Remove two hex plain nuts (113),two machine bolts (14), tripod mount legs (11 and 12), from
head (4).
14

9-1

(6), and pintle lock assembly (7)

1 2 1

23
-_ 11 1

1 g'
4

8
15
2

1
3 1

11
73/
1/

13 1
1

19
21

7/
6

8
5
20
WARNING
To avoid injury to eyes, use care when removing

and installing

spring-loaded

parts.

Remove straight pin (16), sleeve latch (17), and helical spring (18) from body (15).

Remove hex plain nut (19), machine bolt (20), and tripod mount leg (21) from head (4).

If damaged, remove setscrew (22) from sleeve bushing (23), and remove sleeve bushing (23) from
head(4).

6-8 Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
INSPECTION/REPAIR
1

Inspect for broken, damaged,

or missing parts.

Pintle lock assembly is a repairable assembly.

Refer to paragraph 6-7.

18-1
1

13
24

24/

5
26

26/
10

17
19
23
12
3

If body (2) is broken or damaged, repair is by replacement of the next higher assembly.

Repair is by replacement of authorized parts (appx C).

REASSEMBLY
1

If removed, install sleeve bushing (1) in head (2). Install setscrew (3) in sleeve bushing (1).

Install helical spring (4), sleeve latch (5), and straight pin (6) on body (7).

Install leg (17) and tripod mount leg (12) on head (2) and secure with two machine bolts (20) and
two hex plain nuts (10).

Install tripod mount leg (11) and secure to head (2) with machine bolt (20) and hex plain nut (13).

6-9

Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

16-5.

TRIPOD LEG ASSEMBLY - MAINTENANCE INSTRUCTIONS (cont)

NOTE
Adjust hex plain nuts for 0.003 in. (0.008 cm) maximum clearance
between head and legs. All legs must pivot freely.
Place legs in vise before staking.

Stake hex plain nuts (10 and 13) to machine blots (9 and 12) in three places.
NOTE
Traverse bar assembly (16) must be adjusted so the sleeve (14) and
stop (15) are 0.25 to 0.38 in. (0.64 to 0.97 cm) apart before locking.

Install traverse bar assembly (16) on two tripod mount legs (12 and 17), and secure with two
machine bolts (18) and two hex plain nuts (19).

Stake hex plain nuts (19) to machine bolts (18) in three places.

Tighten nut (20) and stake in slot on traverse bar assembly (16).

If removed, install pintle lock assembly (21), two new lockwashers

(23) on head (2).

(22), and two machine screws

10 If removed, install two sleeve spacers (24), two machine bolts (25), and two hex plain nuts (26) on
head (2).
11 Stake two hex plain nuts (26) to two machine bolts (25) in three places.
9

18-V
25

18
19

4
6

5
r
26

241
24
I ?/
r

/1@
26/ 21

17
19
12
6-10

Change

1
0'
I

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

6-6.

MECHANISM ASSEMBLY (TRAVERSING AND CLAMPING UNIT) AND

MECHANISM ASSEMBLY (ELEVATING UNIT) - MAINTENANCE
INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx 13)
Small Arms Shop Set (item 1, appx B)

Spanner Wrench (item 3, appx 13)

Materials/Parts
Lockwasher (11010413)
Self-locking nut (MS51943-2)
Self-locking nut (MS51943-4)
Spring pin (MS16562-120)
Equipment Condition
6-4 Traversing and elevating mechanism disassembly
DISASSEMBLY
1

Remove two retaining rings (2) from headless

grooved pin (3).

Remove headless grooved pin (3) from

traversing and elevating mechanism.

Remove and discard two self-locking nuts

(1 and 5).

Remove traversing handwheel (4) as a unit.

WARNING
To avoid injury to eyes, use care when
removing and installing spring-loaded parts.

3
2

2"0

10
9

7
6

Separate union nut (8), scale dial (7), headless

straight pin (10), compression helical spring
(9), and knob (6).
5

Change 2 6-11

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

6-6.

MECHANISM ASSEMBLY
MECHANISM ASSEMBLY
INSTRUCTIONS (cont)

(TRAVERSING AND CLAMPING UNIT) AND

(ELEVATING UNIT) - MAINTENANCE

Remove woodruff key (14) and flat washer

(11) from traversing screw (15). Push
traversing mechanism ring (13) from yoke (12)
and remove traversing screw (15) from yoke.

12
13

15
14
7

Pull out slightly on elevating stop assembly

(18) and remove elevating screw assembly
(16) from elevating mechanism sleeve (17).

17
18

NOTE
Break staking stop screw with punch and
hammer before removing gun stop.
8

Turn elevating screw assembly until

compressed or flush. Using spanner wrench
(item 3, appx B), remove automatic gun stop
(19) from end of elevating screw (20).

19
N
A

6-12

Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322
DISASSEMBLY
9

(cont)

Remove upper elevating screw (21) with scale

plate (22) attached.

21
0

10 If damaged, remove scale plate (20).

11 Remove externally threaded ring (24) from

lower elevating screw (23).

23
24

12 Remove setscrew (26) and lower elevating

screw (23) from knob (25).

25-ar

13 Smooth stake marks on handwheel click ring

(28) and remove. Remove dial pointer (27)
from knob (25).

Change 2 6-13

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-11-322

6-6.

MECHANISM ASSEMBLY (TRAVERSING AND CLAMPING UNIT) AND

MECHANISM ASSEMBLY (ELEVATING UNIT) - MAINTENANCE
INSTRUCTIONS(cont)
WARNING

To avoidinjuryto eyes,use carewhen

removing and installing spring-loaded parts.
14 Remove headless straight pin (31) and
compression helical spring (30) through the
center hole of knob (25).
15 If damaged, drill out plain solid disk (29).

16 Drive out and discard spring pin (32).

31
30

CD
32
18

33
17

34
35
36
a

17 Smooth staked metal on elevating stop assembly (18) and remove from elevating mechanism
sleeve (17).
18 Remove machine screw (37) and lockwasher (36) from traversing lever (35). Remove traversing
lever torsion helical spring (34), and machine screw (33) from elevating mechanism sleeve (17).
Discard lockwasher (36).
INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

If yoke is broken or missing, repair is by replacement of next higher assembly.

If upper elevation screw, lower elevation screw, traversing screw, or elevating mechanism sleeve
are broken or damaged, repair is by replacement of next higher assembly.

Repair is by replacement of authorized parts (appx C).

6-14 Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
REASSEMBLY
NOTE
Machine screw (1) will need to be adjusted
when traversing lever is installed. Traversing
lever must be aligned with traverse bar
assembly.

34
35

Install machine screw (33), torsion helical

spring (34), and traversing lever (35) on
elevating mechanism sleeve (17). Secure
with new lockwasher (36) and machine screw
(37).

36
37

Install elevating stop assembly (18) and stake

in four places near bottom. Install new spring
pin (32) and stake material of elevating
mechanism sleeve (17) over spring pin on
both ends.

18
3 2'V

31
31

30
31

30
28

P0
30
NOTE
If plain solid disk was removed, perform steps 3 and 4. If plain solid disk was
not removed, go to step 5.
3

Drill out any portion of plain solid disk remaining in hole of knob (25) using 0. 125 (1/8) in. twist drill.

Install headless straight pin (31), compression helical spring (30), and plain solid disk (29) in side of
knob (25). Disk is to be flush to 0.010 in. (0.025 cm) below outer diameter of knob (25). Stake rim
of hole in three places.

Change 2

6-15

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

6-6.

MECHANISM ASSEMBLY (TRAVERSING AND CLAMPING UNIT) AND

MECHANISM ASSEMBLY (ELEVATING UNIT) - MAINTENANCE
INSTRUCTIONS (cont)

REASSEMBLY

(cont)

Install compression
(25).

helical spring (30) and headless straight pin (31) through center hole of knob

Apply pressure to end of headless straight pin (31) and hold it while inserting handwheel click ring
(28). Make sure key of handwheel click ring is aligned with 0 graduation mark on knob (25).

--25
C14

6-16

Position lower elevating screw (23) under handwheel click ring (25) and rest it on a flat surface.
Install dial pointer (27) on handwheel click ring. Make sure dial pointer aligns within 0.030 in.
(0.076 cm) of 0 graduation. Stake in four places, 90 degrees + 5 degrees apart.

Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
8

If removed, install scale plate (20). Position as

far as possible toward upper end of groove.
Stake on both sides at top, middle, and bottom
of scale plate (six locations total) in the base of
thread area to prevent thread damage.
Slide knob (25) on upper elevating screw (21)
until top of dial pointer (27) is aligned with 0
graduation on scale plate (20). Screw lower
elevating screw (23) on upper elevating screw
(21) until fully seated in knob (25). Recheck
graduation alignment to make sure it is
correct.

217&2(

20
25

10 Install externally threaded ring (24) on knob

(25). Tighten externally threaded ring until
flush with bottom of knob and stake in two
places.

NOTE
If threaded hole in knob does not align
with original hole in flange of lower elevation
screw, perform step 11. If holes are aligned,
go to step 12.

Drill flange hole in lower elevation screw (23)

to a depth of 0.30 in. (0.76 cm) using a 0.078
(5/64) in. twist drill.

23
av

12 Recheck to make sure graduation alignment

has been maintained. Install and tighten
setscrew (22).

13 Screw upper elevating screw (21) in lower

elevating screw (23).
14 Using spanner wrench (item 3, appx B) install
automatic gun stop (19) until flush and stake in
two places 180 degrees apart.

Change
2 6-17

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

6-6.

MECHANISM ASSEMBLY
MECHANISM ASSEMBLY
INSTRUCTIONS
(cont)

REASSEMBLY

(TRAVERSING AND CLAMPING UNIT) AND

(ELEVATING UNIT) - MAINTENANCE

(cont)

15 Pull back slightly on elevating stop assembly

(18) and screw elevating screw assembly (116)
in elevating mechanism sleeve (17).

.16

16 Install yoke (12), traversing mechanism ring

(13), traversing screw (15), and flat washer
(10).

aW@o
13
0

17 Assemble union nut (4), scale dial (7),

headless straight pin (110),compression helical

spring (9), and knob (4) to make traversing
handwheel.

10
@q
8

Change 2 6-18

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322
18 Install woodruff key (14) and traversing
handwheel (4), and secure with two new selflocking nut (1). Traversing handwheel
should move freely with no more than 1/16 of
a turn backlash.
19 Install headless grooved pin (16) and two
retaining rings (15) on traversing and elevating
mechanism.

15
z

15
4
1
14

Change 2 6-19

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

6-7.

PINTLE LOCK ASSEMBLY - MAINTENANCE INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Solid rivet (11010448)
Equipment Condition
6-5 Pintle lock assembly removed
DISASSEMBLY
WARNING
To avoid injury to your eyes, use care when
removing and installing spring-loaded parts.

WARNING
To avoid injury to your eyes, wear safety
glasses when grinding parts.
1

Grind head off solid rivet (1). Remove solid

rivet and pintle lock release cam (2). Discard
solid rivet.

Remove shaft collar (3) from body (4).

Remove housing (5) and two helical springs

(6) from body (4).

3
2
5

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

If shaft collar, body, or housing are broken or damaged, repair is by replacement of next higher

assembly.
3

Repair is by replacement of authorized parts (appx C).

REASSEMBLY
1

Install two helical springs (6) in body (4). Install body in housing (5) so that post sticks out through
U-shaped opening of housing.

Install shaft collar (3) on body (4).

Position pintle lock release cam (2) over body (4) and secure with new solid rivet (1). Pintle lock
release cam should pivot freely after riveting. Peen over end of rivet.

6-20

Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

CHAPTER 7
M3 TRIPOD MOUNT
Section 1. UNIT MAINTENANCE
7-1.

M3 MACHINE GUN TRIPOD MOUNT-MAINTENANCE

INSTRUCTIONS
INSTRUCTIONS

THIS TASK COVERS:

Disassembly

Inspection/Repair

Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx 13)
Materials/Parts
cotter pin (MS24665-834)
DISASSEMBLY

if damaged, remove mount pintle (1) from

sleeve bearing (2).

Remove cotter pin (3), slotted plain nut (4), and

machine bolt (5) from mount pintle (1). Discard

cotter pin.
3

Turn remote control lever (6) counterclockwise

and remove elevation mechanism (7) from
traversing bar assembly (8).

4
3

2
8

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

Elevation mechanism is a repairable assembly.

Notify direct support maintenance.

Repair is by replacement of authorized parts

(appx C).

REASSEMBLY
1 Place elevation mechanism (7) on traversing bar assembly (8) and secure by turning remote control lever
(6) clockwise.
2

Install machine bolt (5), slotted plain nut (4), and new cotter pin (3) on mount pintle (1).

If removed, install mount pintle (1) on sleeve bearing (2).

7-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
7-2.

TRIPOD MOUNT LEG (LEFT REAR, FRONT, AND RIGHT REAR)---MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

Inspection

Disassembly

Repair

Reassembly

INITIAL SETUP
Toolsand Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Materials/Parts
Lockwasher (11010530)

NOTE
Unit maintenance on the tripod mount legs (left rear, front, and right rear) consists of replacing
hardware that is missing or damaged. Procedures for the three legs are identical. The following
procedure is written and illustrated for the left rear tripod mount leg but applies to all three tripod
mount legs.

INSPECTION

NOTE
TRIPODMOUNTLEGREMOVEDFOR
CLARITY.

Check for broken, damaged, or missing parts.

DISASSEMBLY
1

Remove setscrew (1) and Iockwasher (2) from

mount leg (3). Discard Iockwasher.

Remove spring pin (4) and hexagon plain nut (5)

from manual control handle (6).

REPAIR
Repair is by replacement of authorized parts (appx C).
REASSEMBLY
1

Install hexagon plain nut (5) and spring pin (4)

on manual control handle (6). Stake nut at both
ends of pin.

Install new Iockwasher (2). Install setscrew (1)

on mount leg (3),

7-2

_/{_

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AlR FORCET.O. 11W2-8-1-322

Section
7-3. M3 MACHINE

II. DIRECT SUPPORT MAINTENANCE

GUN TRIPOD MOUNT-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

Inspection/Repair

Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Cotter pin (MS24665-834)

DISASSEMBLY
1

If damaged, remove mount pintle (1) from

sleeve bearing (2).

Remove cotter pin (3), slotted plain nut (4), and

machine bolt (5) from mount pintle (1). Discard
cotter pin.
Turn remote control lever (6) counterclockwise
and remove elevation mechanism (7) from
traversing bar assembly (8).

7
6

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

For further disassembly of M3 machine gun

tripod mount, refer to paragraph 7-4.

Elevation mechanism is a repairable assembly.

Refer to paragraph 7-8.

Repair is by replacement of authorized parts

(appx C) .

REASSEMBLY
1

Place elevation mechanism (7) on traversing bar assembly (8) and secure by turning remote control lever
(6) clockwise.

Install machine bolt (5), slotted plain nut (4), and new cotter pin (3) on mount pintle (1).

If removed, install mount pintle (1) on sleeve bearing (2).

7-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
7-4.

M3 MACHINE GUN TRIPOD MOUNT, BEARING ASSEMBLY

BOLT--MAINTENANCE
INSTRUCTIONS

HEAD, AND MACHINE

THIS TASK COVERS:

Disassembly

Inspection/Repair

Reassembly

INITIAL SETUP
Toolsand SpecialTools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Lockwasher (2) (11010529)
Spring pin (MS39086-95)
EquipmentConditions
7-3
M3 machine gun tripod mount partially disassembled

DISASSEMBLY

Remove spring pin (1) and front leg'clamping

nut (2). Discard spring pin.

Rem ove machine bolt (3) ana front tripod mount

leg (4).

Remove headless straight pin (5) from screw

(6).

Remove eight machine screws (7) and two

retaining plates (8) from bearing assembly head
(9).

Remove two hexagon plain nuts (10), two

machine bolts (11), left rear tripod mount leg
(12), and right rear tripod mount leg (13).

Remove two hexagon plain nuts (14), two

machine bolts (15), and traversing bar assembly
(16) from left rear tripod mount leg (12) and right
rear tripod mount leg (13).

7-4

Remove two hexagon plain nuts (17), two

machine bolts (18), and two sleeve spacers (19)
from bearing assembly head (9).

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

9
WARNING

Make sure the mount latch is locked before

removing.
Remove two machine screws (20), two
lockwashers (21), and pintle mount latch (22)
from bearing assembly head (9). Discard
lockwashers.

22
21
20

24
Remove setscrew (23) and sleeve bearing (24)
from tripod head (25).

12, 401004'

23
INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

Left rear tripod mount leg is a repairable assembly. Refer to paragraph 7-5.

Front tripod mount leg is a repairable assembly. Refer to paragraph 7-6.

Right rear tripod mount leg is a repairable assembly. Refer to paragraph 7-7.

Pintle mount latch is a repairable assembly. Refer to paragraph 7-9.

If bearing assembly head is broken or damaged, repair is by replacement of next higher assembly.

If tripod head is broken or damaged, repair is by replacement of next higher assembly.

If screw (6108400) is broken or damaged, repair is by replacement of next higher assembly.

Repair is by replacement of authorized parts (appx C).

7-5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
7-4.

M3 MACHINE GUN TRIPOD MOUNT, BEARING

BOLT-MAINTENANCE
INSTRUCTIONS
(cont)

ASSEMBLY

HEAD, AND MACHINE

REASSEMBLY

CIO
3
1

Install sleeve bearing (1) and setscrew (2) in

tripod head (3).

6
11

Install two sleeve spacers (4), two machine bolts (5), and two hexagon plain nuts (6) in bearing assembly
head (7). Stake each nut to machine bolt in three places.

Position left rear tripod mount leg (8) and right rear tripod mount leg (9) in bearing assembly head (7) and
secure with two machine bolts (10) and two hexagon plain nuts (11). Legs should pivot freely in unlocked
position. Stake each nut to machine bolt in three places.

7-6

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Position nonadjustable end of traversing bar assembly (12) into collar (13) of left rear tripod mount leg (8)
and secure with machine bolt (14) and hexagon plain nut (15), Stake nut to machine bolt in three places.

Position adjustable end of traversing bar assembly (12) into sliding sleeve (16) of right rear tripod mount leg
(9) and loosely install machine bolt (17) and hexagon plain nut (18). Adjust traversing bar assembly so that
gap between sliding sleeve (16) and locking sleeve (19) is between 0.50 and 0.75 in. (1.27 and 1.91 cra).
Stake adjustable nut in one place. Tighten and stake nut (18) to machine bolt in three places.

Install pintle mount latch (20), two new Iockwashers (21), and two machine screws (22) on bearing assembly head (7).

Install two retaining plates (23) on bearing assembly head (7) and secure with eight machine screws (24).

Install headless straight pin (25) into screw (26).

Position front tripod mount leg (27) on bearing assembly head (7). Install machine bolt (28) through front
tripod mount leg (27) and bearing assembly head (7) and secure with front leg clamping nut (29) and new
spring pin (30). Stake pin at both ends.

7-7

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
7-5.

LEFT REAR TRIPOD MOUNT LEG--MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

Disassembly

Inspection/Repair

Reassembly

INITIAL SETUP
Toolsand SpecialTools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Lockwasher (11010530)
Spring pin (MS39086-54)
EquipmentConditions
7-4
Left rear tripod mount leg removed

DISASSEMBLY
WARNING
To avoid injury to your eyes, use care when removing and installing spring-loaded parts.
To avoid injury to your eyes, wear safety glasses when grinding parts.
1

If damaged, grind down one end of headless straight pin (1), and remove. Remove remote control lever (2)
and helical compression spring (3). If removed, discard headless straight pin.

Remove setscrew (4) and Iockwasher (5). Discard Iockwasher.

Remove spring pin (6), hexagon plain nut (7), and manual control handle (8) from leg (9). Discard spring
pin.

Remove tripod leg section (1O)from leg (9).

7-8

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
INSPECTION/REPAIR
I

Inspect for broken, damaged, or missing parts,

If leg is damaged, repair is by replacement of next higher assembly.

Repair is by replacement of authorized parts (appx C).

REASSEMBLY
Slide tripod leg section (1) into leg (2) and install new Iockwasher (3) and setscrew (4).
2

Install manual control handle (5) in leg (2). Screw hexagon plain nut (6) on manual control handle and
tighten, leaving a 0.005 + 0.015 in. (0.013 + 0.038 cra) clearance between hexagon plain nut and leg. If
new manual control handle is installed, drill a 0.062 + 0.003 in. (0.157 + 0.008 cm) diameter hole for spring
pin (7) in manual control handle, using hexagon plain nut as a guide. Install new spring pin. Stake nut at
both ends of spring pin.

If removed, install helical compression spring (8), remote control lever (9), and new headless straight pin
(10). Stake headless straight pin securely at both ends.
NOTE
Remote control lever should pivot freely after staking and return to original position by spring
force after compression.
Tripod leg section should slide freely when clamping is released.

7-9

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
7-6.

FRONT TRIPOD MOUNT LEG--MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Toolsand Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Lockwasher (11010530)
Spring pin (MS39086-54)
EquipmentConditions
7-4
Front tripod mount leg removed
DISASSEMBLY

To avoid injury to your eyes, use care

when removing and installing spring-loaded

p_rts.
To avoid injury to your eyes, wear safety
glasses when grinding parts.
1

If damaged, grind down one end of headless

straight pin (1), and remove. Remove remote
control lever (2) and helical compression sprang
(3). If removed, discard headless straight pin.

Remove setscrew (4) and Iockwasher (5).

Discard Iockwasher.

Remove spring pin (6), hexagon plain nut (7),

and manual control handle (8) from leg (9).
Discard spring pin.

Remove leg (10) from leg (9).

7-10

,_,

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
INSPECTION/REPAIR
I

Inspect for broken, damaged, or missing parts.

It either leg is damaged, repair is by replacement of next higher assembly.

Repair is by replacement of authorized parts (appx C).

REASSEMBLY
1

Install leg (1) into leg (2) and install new Iockwasher (3) and setscrew (4).

Install manual control handle (5) in leg (2). Screw hexagon plain nut (6) on manual control handle and
tighten, leaving a 0.005 + 0.015 in. (0.013 + 0.038 cm) clearance between hexagon plain nut and leg. If
new manual control handle is installed, drill a 0.062 + 0.003 in. (0.157 + 0.008 cm) diameter hole for spring
pin (7) in manual control handle, using hexagon plain nut as a guide. Install new spring pin. Stake nut at
both ends of spring pin.

If removed, install helical compression spring (8), remote control lever (9), and new headless straight pin
(10). Stake headless straight pin securely at both ends.
NOTE
Remote control lever should pivot freely after staking and return to original position by spring
force after compression.
Leg (1) should slide freely when clamping is released and pin (11) is retracted.

7-11

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
7-7.

RIGHT REAR TRIPOD MOUNT LEG--MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

/CL_

DISASSEMBLY
WARNING
To avoid injury to your eyes, use care when removing and installing spring-loaded parts.
To avoid injury to your eyes, wear safety glasses when grinding parts.
1

If damaged, grind down one end of headless straight pin (1) and remove. Remove lock-release lever (2)
and helical spring (3). If removed, discard headless straight pin.

If damaged, grind down one end of headless straight pin (4) and remove. Remove manual remote control
lever (5) and helical spring (6). If removed, discard headless straight pin.

Remove setscrew (7) and Iockwasher (8). Discard Iockwasher.

Remove spring pin (9), hexagon plain nut (10), and manual control handle (11) from leg (12). Discard spring
pin.

Remove tripod leg section (13) from leg (12).

7-12

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322
INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

If leg is damaged, repair is by replacement of next higher assembly.

Repair is by replacement of authorized parts (appx C).

5
4
2
3

%
14

7
8
9

REASSEMBLY
1

Slide tripod leg section (1) into leg (2) and install new lockwasher (3) and setscrew (4).

Install manual control handle (5) into leg (2). Screw hexagon plain nut (6) on manual control handle and
tighten, leaving a 0.005 + 0.015 in. (0.013 + 0.038 cm) clearance between plain hexagon nut and leg. If
new manual control handle is installed, drill a 0.062 + 0.003 in. (0.157 + 0.008 cm) diameter hole for spring
pin (7) in manual control handle, using hexagon plain nut as a guide. Install new spring pin. Stake nut at
both ends of spring pin.

It removed, install helical spring (8), manual remote control lever (9), and new headless straight pin (10).
Stake headless straight pin securely at both ends.

If removed, install helical spring (11), lock-release lever (12), and new headless straight pin (13). Stake
headless straight pin securely at both ends.
NOTE
Manual remote control lever and lock-release lever should pivot freely after staking and should
return to original position by spring force after compression.
Tripod leg section (1) should slide freely when clamping is released and pin (14) is retracted.

7-13

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322
7-8.

ELEVATION MECHANISM (TRAVERSING AND CLAMPING UNIT AND ELEVATION

MECHANISM (ELEVATING UNIT)-MAINTENANCE
INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Spanner Wrench (item 3, appx B)
Materials/Parts
Lockwasher (11010413
)
Self-locking nut (MS51943-2)
Self-locking nut (MS51943-4)
Self-locking screw (5140383)
Spring pin (MS16562-120)
Equipment Conditions
7-3
Elevation mechanism

removed

DISASSEMBLY

3
1

Pry open links on ends of single chain assembly

(1) and remove single chain assembly. Remove
quick release pin (2) from yoke (3).

Remove two self-locking nuts (4 and 5). Discard

two self-locking nuts.
5

7-14

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Remove traversing handwheel (6) as a unit.

WARNING'
To avoid injury to your eyes, use care when removing and installing spring-loaded parts.

Separate union nut (7), scale dial (8), headless straight pin (9), helical compression spring (10), and knob
(11).

Remove woodruff key (12) and flat washer (13) from traversing screw (14). Push traversing click ring (15)
from yoke (3) and remove traversing screw (14) from yoke.

Pull out slightly on flat spring (16) and remove elevating screw assembly (17) from elevating mechanism
sleeve (18),

Using spanner wrench (item 3, appx B), remove automatic gun stop (19) from end of lower elevation screw

(2o).
7-15

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
7-8.

ELEVATION
MECHANISM

DISASSEMBLY

MECHANISM
(ELEVATING

(TRAVERSING AND CLAMPING UNIT) AND ELEVATION

UNIT)-MAINTENANCE
INSTRUCTIONS
(cont)

(cont)

Remove upper elevation screw (21) with designation plate (22) attached.

If damaged, remove designation plate (22).

Remove externally threaded ring (23) from lower

elevation screw (20).

24
25

Remove setscrew (24) and lower elevation

screw (20) from knob (25).

7-16

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W241-1-322

Smooth stake marks on elevating click ring (26)

and remove. Remove dial pointer (27) from
knob (25).

25
WARNING
To avoid injury to your eyes, use care
when removing and installing spring-loaded
parts.
13

Remove headless straight pin (28) and compression helical spring (29) through the center
hole of knob (25).

If damaged, drill out plain solid disk (30).

28
29
30

Drive out and discard spring pin (31).

Smooth staked metal on flat spring (16) and .

remove from elevating mechanism sleeve (18)

7-17

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11
W2-8-1-322
7-8.

ELEVATION MECHANISM (TRAVERSING AND CLAMPING UNIT) AND ELEVATION

MECHANISM (ELEVATING UNIT)-MAINTENANCE
INSTRUCTIONS (cont)

DISASSEMBLY (cont)
18

WARNING
To avoid injury to your eyes, use care
when removing and installing spring-loaded
parts.
17

Remove machine screw (32) and lockwasher

(33) from remote control lever (34). Discard
lockwasher. Remove remote control lever,
helical torsion spring (35), and self-locking screw
(36) from elevating mechanism sleeve (18).
Discard self-locking screw.

35
34
33
32

INSPECTION/REPAIR
1

Inspect for broken, damaged,

It yoke is broken or damaged, repair is by

replacement of next higher assembly.

Repair is by replacement
(appx C).

or missing parts.

of authorized parts

REASSEMBLY
2

Install new self-locking screw (1) on elevating

mechanism sleeve (2).
NOTE
Self-locking screw will need to be adjusted
when remote control lever is installed.
Remote control lever must be aligned with
traversing bar assembly.

7-18

Install helical torsion spring (3) and remote

control lever (4) on self-locking screw (1) and
secure with new lockwasher (5) and machine
screw (6).

4
5
6

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8..1-322

Install flat spring (7) and stake in four places

near the bottom. Instalt new spring pin (8) and
stake material of elevating mechanism sleeve
(2) over spring pin on both ends.

NOTE
If plain solid disk was removed, perform
steps 4 and 5. If plain solid disk was not
removed, go to step 6.

Drill out any portion of plain solid disk remaining

in hole of knob (9) using a 0.125 (1/8) in. twist
drill.

Install headless straight pin (10), helical compression spring (11), and plain solid disk (12) in
side of knob (9), Disk is to be flush to 0.010 in,
(0.025 cm) below outer diameter of knob (9).
Stake rim of hole in three places.

Install helical compression spring (11) and headless straight pin (10) through center hole of knob (9).

Apply pressure to end of headless straight pin (10) and hold it while inserting elevating click ring (13). Make
sure key of elevating click ring is aligned with 0 graduation mark on knob (9).

7-19

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
7-8.

ELEVATION MECHANISM (TRAVERSING AND CLAMPING UNIT) AND ELEVATION

MECHANISM (ELEVATING UNIT)--MAINTENANCE
INSTRUCTIONS (cont)

REASSEMBLY (cont)

Position lower elevation screw (14) under elevating click ring il3) and rest it on a flat surface. Install dial
pointer (15) on elevating click ring. Make sure dial pointer aligns within 0.030 in. (0.076 cm) of 0 graduation.
Stake in three places 120 + 5 degrees apart.

If removed, install designation plate (16).

Position as far as possible toward upper end of
groove. Stake on both sides at top, middle, and
bottom of designation plate (six locations total)
in the base of thread area to prevent thread

Slide knob (9) on upper elevation screw (17)

damage.
until top of dial pointer (15) is aligned with 0
graduation on designation plate (16). Screw
lower elevation screw (14) on upper elevation
screw (17) until fully seated in knob (9).
Recheck graduation alignment to make sure it is
correct.

7-20

Install externally
onflush
knobwith
(9).
Tighten
externallythreaded
threadedring
ring(18)
until
bottom of knob and stake in two places.

;_
;,

'i_
'

lkLt,)
_O/_'"_

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIR FORCET.O. 11
W2-8-1-322

NOTE
If threadedhole in knob does not alignwith
original hole in flange of lower elevation
screw, perform step 12. If holes are
aligned, go to step 13.
12

Drill flange hole in lower elevation screw (14) to

a depth of 0.30 in. (0.76 cm) using a 0.078
(5/64) in. twist drill.

Recheck to make sure graduation alignment has

been maintained. Install and tighten setscrew
(19).

Screw upper elevation screw (17) in lower

elevation screw (14).

Using spanner wrench (Rem 3, appx 8), install

automatic gun stop (20) until flush and stake in
two places 180 degrees apart.

21
16

Pull back slightly on flat spring (7) and screw

elevating screw (21) in elevating mechanism
sleeve (2).

7-21

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
7-8.

ELEVATION MECHANISM
MECHANISM (ELEVATING

(TRAVERSING
AND CLAMPING UNIT) AND ELEVATION
UNIT)-MAINTENANCE
INSTRUCTIONS
(cont)
22

REASSEMBLY (cont)

23
24

Install yoke (22), traversing click ring (23),

traversing screw (24), and flat washer (25).

26
18

Assemble union nut (26), scale dial (27), headless straight pin (28), helical compression spring
(29), and knob (30) to make traversing handwheel (31).

27
30

34
35
31

-","Jot

33
36
22

Install woodruff key (32) and traversing handwheel (31), and secure with two new self-locking
34). Traversing handwheel should move freely with no more than 1/16 of a turn backlash.

Install quick release pin (35) in yoke (22). Crimp links on ends
(22) and quick
release
pin

7-22

single chain

nuts (33 and

assembly
(36)to

yoke

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 1lW2-8-1-322
7-9.

PINTLE MOUNT LATCH--MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

Disassembly

Inspection/Repair

Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Solid rivet (11010448)
EquipmentConditions
7-4
Pintie mount latch removed
DISASSEMBLY
WARNING
To avoid injury to your eyes, wear safety
glasses when grinding pads.
1

Grind head off solid rivet (1). Remove solid rivet

and pintle lock release cam (2). Discard solid
rivet.

Remove shaft collar (3) from lock (4).

WARNING

Wf '_

To avoid injury to your eyes, use care

when removing and installing spring-loaded
parts.
3

Remove housing (5) and two helical compression springs (6) from lock (4).

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

It shaft collar, lock, or housing are broken or damaged, repair is by replacement of next higher assembly.

Repair is by replacement of authorized parts (appx C).

REASSEMBLY
1

Install two helical compression springs (6) in lock (4). Install lock in housing (5) so that post sticks out
through U-shaped opening of housing.

Install shaft collar (3) on lock (4).

Position pintle lock release cam (2) over lock (4) and secure with new solid rivet (1). Pintle lock release cam
should pivot freely after riveting. Peen over end of rivet.
7-23/(7-24 blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

CHAPTER 8
M66 MACHINE GUN MOUNT RING
Section I. UNIT MAINTENANCEINSTRUCTIONS
8-1.

M66 MACHINE GUN MOUNT RING--MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Toolsand SpecialTools
Small Arms Repairman Tool Kit (item 2. appx B)
Materials/Parts
Cotter pin (2)(MS24665-132)
Self-locking nut (2) (MS51922-29)

EquipmentConditions
14-1
M66 machine gun mount ring removed

DISASSEMBLY

Remove two cotter pins (1). two headed straight

1(_,..._

_____

assembly (4). Discard cotter pins.

Remove two setscrews (5), flexible wire (6), and

cartridge deflector (7).

Remove two self-locking nuts (8), two flat

washers (9), two hexagon capscrews (10), and
deflector support (11) from ring assembly (4).
Discard self-locking nuts.

8-1

ARMY TMI9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
8-1.

M66 MACHINE GUN MOUNT RING-MAINTENANCE

INSTRUCTIONS

(cont)

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

Ring assembly is a repairable assembly.

Repair is by replacement of authorized parts (appx C).

Notify direct support maintenance.

REASSEMBLY

9
3

2
0 0
10

6
7
4
5

Position deflector support (1) on ring assembly (2) and secure with two hexagon capscrews (3), two flat
washers (4), and two new self -locking nuts (5).

Install flexible wire (6), cartridge deflector (7), and two setscrews (8).

Position cushioning pad (9) on ring assembly (2), and secure with two headed straight pins (10) and two
new cotter pins (11).

8-2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
8-2.

RING ASSEMBLY

AND RING-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

c. Reassembly

b. Inspection/Repair

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Equipment Conditions
M66 machine gun mount ring disassembled
8-1
I
DISASSEMBLY
1

Remove pintle lock cap (1), two S chain hooks

(2), and weldless chain (3) from upper revolving
ring (4).

Remove sleeve bushing (5) from upper revolving

ring (4).

If damaged, remove two cotter pins (6) from

pintle lock handle (7) and cotter pin (8) from
headless shoulder pin (9).

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

Repair is by replacement
(appx C).

of authorized parts

REASSEMBLY
1

It removed, install cotter pin (8) in headless

shoulder pin (9) and two cotter pins (6) in pintle
lock handle (7).

Install sleeve bushing (5) in upper revolving ring

(4).

Install weldless chain (3), two S chain hooks (2),

and pintle lock cap (1) on upper revolving ring
(4).

5
6

8-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AlR FORCE T.O. 11 W2-8-1-322
8-3.

RING BRAKE-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

c. Reassembly

b. Inspection/Repair

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (Item 2, appx B)
DISASSEMBLY
1

Remove socket head capscrew (1) and manual

control lever (2).

If damaged, remove two cotter pins (3) from

headless straight pin (4).

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

Repair is by replacement of authorized parts

(appx C).

4
0

REASSEMBLY
1

If removed, install two cotter pins (3) in headless

straight pin (4).

Install manual control lever (2) and secure with

socket head capscrew (1).

8-4

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Section II. DIRECT SUPPORT MAINTENANCE INSTRUCTIONS

8-4.

RING ASSEMBLY,

RING ASSEMBLY, AND RING,--MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection
/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Cotter pin (2) (MS24665-283)
Cotter pin (MS24665-285)
Grease (item 4, appx E)
Lockwasher (22) (MS35333-38)
Lockwasher (24) (MS35333-39)
Lockwasher (MS35338-43)
Mechanical felt (7012805-1)
Mechanical felt (7012805-2)
Mechanical felt (7012806)
Self-locking nut (22) (MS51922-9)
Self-locking nut (2) (MS51922-17)
Supports
Personnel Required
2
Equipment Conditions
M66 machine gun mount ring disassembled
8-1

8-5

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIRFORCET.O. 11W2-8-1-322
8-4.

RING ASSEMBLY, RING ASSEMBLY, AND RING----MAINTENANCEINSTRUCTIONS (cont)

DISASSEMBLY

19
CAUTION
_
I -------1
Ring assembly must be supported
clean, dry area.

over a

Remove sleeve bushing (1) from upper revolving

ring (2).

Remove pintle lock cap (3), two S chain hooks

(4), and weldless chain (5).

Remove cotter pin (6), ring spacer (7), helic-al

compression spring (8), manual control handle
(9), and headless shoulder pin (10) from upper
revolving ring (2). Discard cotter pin.

Remove two cotter pins (11) from pintle lock

handle (12) and remove pintle lock handle from
upper revolving ring (2). Discard cotter pins.

Remove machine screw (13) and lockwasher

(14) from three seal ring segments (15, 16, and
17), and remove three seal ring segments from
outer seal ring (18). Discard lockwasher.

17
20

If damaged, remove two headed straight pins

(19) and separate seal ring segment (15), seal
ring segment (16), and seal ring segment (17).

Remove 24 machine screws (20), 24

lockwashers (21), and outer seal ring (18) from
upper revolving ring (2). Discard lockwashers.

Remove mechanical felt (22) from outer seal

ring (18). Discard mechanical felt.

Remove mechanical felt (23) from outer seal

ring (24). Discard mechanical felt.

4
6

5
2

8
0

8-6

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322
10

Remove 22 machine screws (25), 22 lockwashers (26), and seal retainer ring (27) from
lower revolving ring (28). Discard lockwashers.

Remove mechanical felt (29) from outer seal

ring (24). Discard mechanical felt.

11
12

Remove two self-locking nuts (30), two flat

washers (31), two socket head capscrews (32),
and ring brake (33) from upper revolving ring (2).
Discard self-locking nuts.

Remove two socket head capscrews (34) and

brake lining clamp (35) from lower revolving ring
(28).

2
31

35
32

Remove shoe brake assembly (36) from upper

revolving ring (2).
--------------------------------CAUTION

Lower revolving ring, separator segments,

and roller bearings may fall out when selflocking nuts and socket head capscrews
are removed.
15

Remove 22 self-locking nut (37) and 22 socket

head capscrews (38). Discard self-locking nuts.

Carefully remove lower revolving ring (28) from

outer seal ring (24).

Carefully lift upper revolving ring (2) from outer

seal ring (24).

If damaged, remove 16 separator segments (39)

and 96 roller bearings (40) from outer seal ring (24).

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

If outer seal ring is broken or damaged, repair is

by replacement of next higher assembly.

If upper revolving ring is broken or damaged,

repair is by replacement of next higher assembly.

Ring brake is a repairable assembly. Refer to

paragraph 8-5.

Repair is by replacement of authorized parts

(appx C).

8-7

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIRFORCET.O. 11
W243-1-322
8-4.

RING ASSEMBLY, RING ASSEMBLY, AND RING-MAINTENANCE INSTRUCTIONS (cont)

REASSEMBLY
6
1

Lightly coat 16 separator segments (1) with

grease and install in outer seal ring (2).

Lightly coat 96 roller bearings (3) with grease

and install in 16 separator segments (1).

Carefully lower upper revolving ring (4) into

outer seal ring (2).

Align lower revolving ring (5) with upper revolving ring (4) and secure with 22 socket head
capscrews (6) and 22 new self-locking nuts (7).

9
12

Install shoe brake assembly (8) in upper revolving ring (4). Install brake lining clamp (9) on
lower revolving ring (5) and secure with two
socket head capscrews (10).

Install ring brake (11), two socket head

capscrews (12), two flat washers (13), and two
npw self-locking nuts (14).

Install new mechanical felt (15) in outer seal ring

(2). Pierce 22 holes in mechanical felt.

Install seal retainer ring (16), 22 new lockwashers (17), and 22 machine screws (18) in
lower revolving ring (5).

8
5

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIRFORCET.O. 11
W2-8-1-322
29

Install new mechanical felt (19) in outer seal ring

(2).

Install new mechanical felt (20) in outer seal ring

(21). Pierce 24 holes in mechanical feft.

Install outer seal ring (21) on upper revolving

ring (4) so that cushioning pad bracket (22) is
directly opposite pintle socket (23). Secure
outer seal ring with 24 new lockwashers (24)
and 24 machine screws (25).

26
25

If separated, assemble seal ring segment (26),

seal ring segment (27), and seal ring segment
(28), and secure with two headed straight pins
(29).

Install three seal ring segments (26, 27, and 28)

on outer seal ring (21) and secure with new
lockwasher (30) and machine screw (31).

Install pintle lock handle (32) in upper revolving

ring (4) and secure with two new cotter pins
(33).

Install headless shoulder pin (34), manual

control handle (35), helical compression spring
(36), and ring spacer (37) in upper revolving ring
(4) and secure wfth new cotter pin (38).

Install sleeve bushing (39) in upper revolving

ring (4).

Install weldless chain (40), two S chain hooks

(41), and pintle lock cap (42).

42
41

32
8

37
4

IN
34

39
2

8-9

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIRFORCET.O. 11
W2-8-1-322
8-5.

RING BRAKE-MAINTENANCE INSTRUCTIONS

THISTASKCOVERS:
a. Disassembly

c. Reassembly

b. Inspection/Repair

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Cotter pin (2) (MS24665-283)
Headless straight pin (MS16556-628)
Solid rivet (MS35743-11 )
Equipment Conditions
8-4
Ring brake removed
DISASSEMBLY
9
Q2
1

Remove socket head capscrew (1) and manual

control lever (2).

Remove two cotter pins (3) and headless

straight pin (4) from brake shoe bracket (5).
Discard cotter pins.

Remove solid rivet (6), shaft collar (7), shoe

brake assembly (8), flat washer (9), brake shoe
cam (10), and brake shoe bracket (5) from cam
brake bracket (11). Discard solid rivet.

Remove setscrew (15) and plain round nut (16)

from cam brake bracket (11).

Remove worm shaft assembly (14) from cam

brake bracket (11).

Grind down and remove headless straight pin

(17). Discard headless straight pin. Remove
detent brake body (18) and helical spring (19)
from worm shaft assembly (14).

3
1

5
7

Remove convex washer (12) and helical spring

(13) from worm shaft assembly (14).

8-10

10
G@
1

19
17

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11
W2-8-1-322
INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

Repair is by replacement
(appx C).

of authorized

parls

6
4

REASSEMBLY
1

Install helical spring (1), dletent brake body (2),

and new headless straight pin (3) in worm shaft
assembly (4). Peen pin securely.

Install worm shaft assembly (4) in cam brake

bracket (5).

Install plain round nut (6) in cam brake bracket

(5) and secure with setscrew (7).

Install helical spring (8) and convex washer (9)

on worm shaft assembly (4).

13
12
17
16
5

11
19

4
10
14

Install brake shoe bracket (10), brake shoe cam (11 flat washer (12), shoe brake assembly (13), shaft
collar (14), and new solid rivet (15) on cam brake bracket (5) and worm shaft assembly (4).

Secure brake shoe cam (11) to brake shoe bracket (110)with headless straight pin (16) and two new cotter
pins (17).

Install manual control lever (18) and secure with socket head capscrew (19).

8-11/(8-12 blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11
W2-8-1-322

CHAPTER9
M240E1 FLEXIBLE MACHINE GUN MOUNT, AND
FLEXIBLE MOUNT ASSEMBLY FOR
M122A1 TRIPOD MOUNT AND M240G MACHINE GUN
Section
9-1. FLEXIBLE

1. UNIT MAINTENANCE

INSTRUCTIONS

MACHINE GUN MOUNT - MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

c. Reassembly

b. Inspection/Repair

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx 13)
Materials/Parts
Nonelectrical wire (item 10, appx E)

DISASSEMBLY
6

7
1

Remove nonelectrical wire (1), four

capscrews (2), and holder assembly
(3) from lower cradle support (4).
Discard nonelectrical wire (M240E1 only).

Remove headless grooved pin (9) and

mount pintle (10).

Remove two retaining rings (8) from

grooved pin (18) and separate traversing
and elevating cradle bracket (17)
(M122A1/M240G only).

9
12

10
0

Remove two retaining rings (8) from

headless grooved pin (9).

Remove nonelectrical wire (1), four socket

head capscrews (6) and upper cradle
assembly (7) with attached parts from
lower cradle support (4). Remove round
deflector (16) if damaged (M122A1 /
M240G only). Discard nonelectrical wire.

oyl

"A-8
4

8
8
10

8
17

M122AI

Change 2 9-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

19-1. FLEXIBLE MACHINE GUN MOUNT - MAINTENANCE INSTRUCTIONS (cont)

DISASSEMBLY (cont)
6

Remove two machine screws (11) and deflector (12) from upper cradle assembly (7)
(M240E1 only).

Remove retaining ring (13), spring pin (14), and retaining pin (15) from uppercradle
assembly (7).

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

Upper cradle assembly is a repairable assembly, notify direct support maintenance.

paragraph 9-3.

Repair by replacement

Refer to

of authorized parts (appx C).

REASSEMBLY
1

9-2

Install retaining pin (15) in upper cradle

assembly (7) and secure with spring pin (14).
Install retaining ring (13).

Install deflector (12) on upper cradle assembly

(7) and secure with two machine screws (11)
(M240E1 only).

M122A1

Align holes in traversing and elevating cradle

bracket (17) and lower cradle (4) and install
headless grooved pin (18). Install two
retaining rings (8) on headless grooved pin (9)
(M122A1/M240G only).
Change 2

Install two retaining rings (8) on headless

grooved pin (9).

Align holder assembly (3) with lower cradle

support (4) and secure with four hexagon
head capscrews (2) and new nonelectrical
wire(1) (item 10, appx E) (M240E1 only).

Align holes in mount pintle (10) with holes in

lower cradle support (4) and install headless
grooved pin (9).

Align upper cradle assembly (7) with attached

parts with lower cradle support (4), and secure
right side with two socket head capscrews (6).
Align round deflector (16) with cradle holes
(M122A1/M240G only). Secure left side with
two socket head capscrews (6). Attach new
nonelectrical wire (1) (item 10, appx E) on
both sides.

2
2

8
4

@q
ao-)
10

18
9@ 1
8
17

M122AI

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11
W2-8-1-322

Section II. DIRECT SUPPORT MAINTENANCE INSTRUCTIONS

9-2. FLEXIBLE MACHINE GUN MOUNT - MAINTENANCE INSTRUCTIONS
THIS TASK COVERS:
a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Nonelectrical wire (item 10, appx E)

DISASSEMBLY
7
1

Remove nonelectrical wire (1), four hexagon

head capscrews (2), and holder assembly (3)
from lower cradle support (4). Discard
nonelectrical wire (M240E1 only).
Remove nonelectrical wire (1), capscrews (6)
and upper cradle assembly (7) with attached
parts from lower cradle support (4). Remove
round deflector (16) if damaged (M122A1/
M240G only).

Remove two retaining rings (8) from headless

grooved pin (9).

Remove headless grooved pin (9) and mount

pintle (10).

Remove two retaining rings (8) from grooved

pin(18) and separate traversing and elevating
cradlebracket (17) (M122A1/M240G only).

6
14

13
0

16
M122AI
-

9
12
8
4

8
4
8
4@ @q

Remove two machine screws (11) and

deflector
(
12)from upper cradle assembly (7)
(M240E1 only).
Remove retaining ring (8), spring pin (14),
and retaining pin (15) from upper cradle
assembly (7).

8
17

M122AI

Change
2 9-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

Upper cradle assembly is a repairable assembly.

Repair by replacement

Refer to paragraph 9-3.

of authorized parts (appx C).

REASSEMBLY
1

Install retaining pin (15) in upper cradle assembly (7) and secure with spring pin (4). Install retaining
ring (13).

Install deflector (12) on upper cradle assembly (7) and secure with two machine screws (11).
(M240E1 only).

Align holes in mount pintle (10) with holes in lower cradle support (4) and install headless grooved
pin (9).

Install two retaining rings (8) on headless grooved pin (9).

6
14

M122A1

9
1

LL2

1
2
8
4

zlw-

@q
is
10
17
M122A1

9-4

Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
5

Align upper cradle assembly (7) with attached parts with lower cradle support (4), and secure right
side with two socket head capscrews (6). Align round deflector (16) with cradle holes (M122A1/
M240G only). Secure left side with two socket head capscrews (6). Attach new nonelectrical wire
(1) (item 10, appx E) on both sides.

Align holder assembly (3) with lower cradle support (4) and secure with four hexagon head
capscrews (2) and new nonelectrical wire (1) (item 10, appx E) (M240E1 Flex Mount only).

Align holes in traversing and elevating cradle bracket (17) and lower cradle (4) and install headless
grooved pin (18). Install two retaining rings (8) on headless grooved pin (9) (M122A1/M240G only).

Change 2 9-5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

9-3.

UPPER CRADLE ASSEMBLY - MAINTENANCE INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

c. Reassembly

b. Inspection/Repair

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx 13)
Small Arms Shop Set (item 1, appx 13)
Equipment Condition
9-2
Upper cradle assembly removed

DISASSEMBLY

M14

6 7
8/1
10

9
1

Remove two spring pins (1) from front cradle support (2) and remove front cradle support from two
metallic tubes (3).
WARNING
To avoid injury to your eyes, use care when removing and installing
spring-loaded parts.

Remove two helical springs (4), two spring shields (5), two elastic stops (6), two nonrotating eye
brackets (7), and two elastic stops (8) from metallic tubes (9).

Remove two spring pins (9) and two metallic tubes (6) from rear cradle support (10).

19-6

Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322
INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

If front cradle support is broken or damaged, repair is by replacement

of next higher assembly.

If rear cradle support is broken or damaged, repair is by replacement

of next higher assembly.

Repair is by replacement of authorized parts (appx C).

8
7

G@9

6
X
2
OD

REASSEMBLY
1

Install two metallic tubes (1) in rear cradle support (2) and secure with two spring pins (3).

Install two elastic stops (4), two nonrotating eye brackets (5), two elastic stops (6), two spring
shields (7), and two helical springs (8) on two metallic tubes (1).

Install front cradle support (9) on two metallic tubes (1) and secure with two spring pins (10).

9-7/9-8 blank

Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11
W2-8-1-322

CHAPTER10
M142 MACHINE

GUN MOUNT

Section I. UNIT MAINTENANCE INSTRUCTIONS

10-1.

M142

MACHINE

GUN

MOUNT-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

c. Reassembly

b. Inspection/Repair

a. Disassembly
INITIAL SETUP

Tools and Special Tools

Small Arms Repairman Tool Kit (item 2, appx B)

DISASSEMBLY
1

Remove single chain assembly (1) from quick

release pin (2) and mount-pintle (3).

Remove quick release pin (2) from mount pintle

(3).

If damaged, remove cotter pin (4).

INSPECTION/REPAIR
1

inspect for broken, damaged, or missing parts.

Repair is by replacement
(appx C).

of authorized parts
3

2
REASSEMBLY
1

It removed, install new cotter pin (4).

Install quick release pin (2) in mount pintle (3).

Install single chain assembly (1) on mount pintle

(3) and quick release pin (2).

10-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11
W2-8-1-322

Section II. DIRECT SUPPORT MAINTENANCE INSTRUCTIONS

10-2.

M142 MACHINE GUN MOUNT AND PLATFORM ASSEMBLY-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

c. Reassembly

b. Inspection/Repair

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Personnel Required
2
Materials/Parts
Cotter pin (MS24665-291)
Nonelectrical wire (item 10, appx E)
7

DISASSEMBLY

0
8

0
4

5
3

Remove single chain assembly (1) from quick release pin (2) and mount pintle (3).

Remove quick release pin (2) from mount pintle (3).

Remove cotter pin (4), slotted plain nut (5), flat washer (6), shoulder bolt (7), and platform assembly (8) with
attached parts from mount pintle (3). Discard cotter pin.

10-2

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

14
10

12
9

Remove nonelectrical wire (9) and three hexagon capscrews (10). Remove machine gun cradle (11) from
platform assembly (8). Discard nonelectrical wire.

Remove nonelectrical wire (12), four hexagon capscrews (13), and gun holder assembly (14) from machine
gun cradle (11). Discard nonelectrical wire.

19
18
16
15

WARNING
To avoid injury to your eyes, use care when removing and installing spring-loaded parts.
6

Remove machine screw (15) and hexagon plain nut (16) from mount pintle (3).

Remove headless grooved pin (17), torsion helical spring (18), and catch strike (19) from platform assembly
(20).
10-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11
W2-8-1-322
10-2.

M142 MACHINE GUN MOUNT AND PLATFORM ASSEMBLY-MAINTENANCE

INSTRUCTIONS (cont)

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

Repair is by replacement of authorized parts (appx C).

REASSEMBLY

Have helper

NOTE
assist in reassembly.

Place torsion helical spring (1) and catch strike (2) on platform assembly (3) and secure with headless
grooved pin (4).

Place hexagon plain nut (5) on machine screw (6) and install in mount pintle (7).
8
9

10-4

Place gun holder assembly (8) on machine gun

cradle (9) and secure with four hexagon
capscrews (10) and new nonelectrical wire (11)
(item 10, appx E).

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

9
13

12
Place machine gun cradle (9) on platform
assembly (12) and secure with three hexagon
capscrews (13) and new nonelectrical wire (14)
(item 10 appx E).

12
18

0
0

16
7

Place platform assembly (12) with attached parts in mount pintle (7) and secure with shoulder bolt (15), flat
washer (16), and slotted plain nut (17). Align slotted plain nut with shoulder bolt and install new cotter pin
(18).

Install quick release pin (19) in mount pintle (7).

Install single chain assembly (20) on mount pintle (7) and quick release pin (19).

10-5/(10-6 blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

CHAPTER11
6650.50 CAL MACHINE GUN MOUNT
Section I. UNIT MAINTENANCE INSTRUCTIONS
11-1.

6650.50

CAL MACHINE

GUN MOUNT-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

c. Reassembly

b. Inspection/Repair

a. Disassembly
INITIAL SETUP

Tools and Special Tools

Small Arms Repairman Tool Kit (item 2, appx B)

DISASSEMBLY
Remove three quick release pins (1, 2, and 3) from
machine gun cradle (4) and mount pintle (5).
4

INSPECTION/REPAIR
1

Inspect for broken, damaged,

For further disassembly of 6650 .50 cal machine

gun mount, notify direct support maintenance.

Repair is by replacement
(appx C).

or missing parts.

3
2

of authorized parts
5

REASSEMBLY
Install three quick release pins (3, 2, and 1) in
machine gun cradle (4) and mount pintle (5).

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-11-322

Section 11.DIRECT SUPPORT MAINTENANCE INSTRUCTIONS

11-2.

6650.50 CAL MACHINE GUN MOUNT--MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly
b. Inspection/Repair

c. Reassembly
d. Adjustment

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Cotter pin (MS24665-132)
Enamel (item 3, appx E)
Lockwasher (4) (MS35333-42)
Lockwasher (MS35333-46)
Lockwasher (3) (MS35338-45)
Lockwasher (MS35338-46)

DISASSEMBLY
6

5
4

2
3

Unlock cam (1) and remove ammunition box tray assembly (2) from ammunition bracket (3).

Clamp machine gun cradle (4) in vise with case (5) facing to the front.
WARNING
Case is under spring tension.

3
2

To avoid injury to personnel, use care when removing case.

Loosen but do not remove hexagon head capscrew (6)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

6
5
7

Place socket and drive socket handle on hexagon portion of case (5). Hold handle to counterbalance spring tension. Remove hexagon head
capscrew (6) and lockwasher (7). Discard
lockwasher.

9
8

Allow socket handle to rotate downward to

relieve spring tension. Remove socket and drive
socket handle.

Remove equilibrator stud (8) and lockwasher (9)

from case (5) and remove case. Discard
lockwasher.

Remove torsion spiral spring (10) and flat

washer (11) from headless grooved pin (12).

1
C

11-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
11-2.

6650.50 CAL MACHINE GUN MOUNT-MAINTENANCE

INSTRUCTIONS

(cont)

DISASSEMBLY (cont)
22

12
18

3
13

16
14
21

4
21

20
20
19
23

NOTE
Remove machine gun cradle from vise.
8

Remove four hexagon head screws (13), four lockwashers (14), and ammunition bracket (3) from machine
gun cradle (4). Discard lockwashers.

Remove three quick release pins (15, 16, and 17).

11-4

Remove two wicks (18), two hexagon plain nuts (19), two lockwashers (20), and two threaded tapered pins
(21). Remove headless straight pin (22) and headless grooved pin (12) from machine gun cradle (4).
Separate mount pintle (23) from machine gun cradle (4). Discard lockwashers.

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIRFORCET.O. 11W2-8-1-322
27

31
29
29
Remove hexagon plain nut (24), lockwasher
(25), and rod end clevis (26) with attached parts
from mount pintle (23). Discard lockwasher.

281

WARNING

To avoid injury to your eyes, use care

when removing and installing spring-loaded
parts.
25
Remove cotter pin (27) from headed straight pin
(28), and remove headed straight pin, two flat
washers (29), machine gun bar (30), and torsion
helical spring (31) from rod end clevis (26).
Discard cotter pin.

24
23

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

If mount pintle is broken or damaged, repair is by replacement of next higher assembly.

Touch up bright metal surfaces with olive drab enamel paint (item 3, appx E).

Repair is by replacement of authorized parts (appx C).

6
4
4

REASSEMBLY
1

Align torsion helical spring (1) and machine gun

bar (2) with rod end clevis (3) and secure with
two flat washers (4), headed straight pin (5), and
new cotter pin (6).

Place rod end clevis (3) with attached parts in

mount pintle (7) and secure with new
lockwasher (8) and hexagon plain nut (9).

8
2

9
7

11-5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
11-2.

6650.50 CAL MACHINE GUN MOUNT-MAINTENANCE

REASSEMBLY (cont)

INSTRUCTIONS (cont)
14

16
17

20
23

19
22

12
12
a 13

13
7

18
3

Align mount pintle (7) with machine gun cradle (10) and secure with two threaded tapered pins (11), two new
lockwashers (12), and two hexagon plain nuts (13). Install flat washer (14) onto headless grooved pin (15).
Install headless grooved pin (15) with flat washer (14) and headless straight pin (16), and secure with two
wicks (17).

Install three quick release pins (18, 19, and 20).

Place ammunition bracket (21) on machine gun cradle (10) and secure with four new lockwashers (22) and
four hexagon head screws (23).
10

15
6

11-6

Clamp machine gun cradle (10) in vise with

headless grooved pin (15) facing to the front.

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

J
I

Install torsion spiral spring (24) into case (25). Align hole in spring end with equilibrator stud hole in case.
Secure with new Iockwasher (26) and equilibrator stud (27).

Align torsion spiral spring (24) tang with slot on headless grooved pin (15) and install torsion helical spring
(24) and case (25) on headless grooved pin (15).

WARNING
To avoid injury to your eyes, use care
when removing and installing spring-loaded
parts.
9

"t
,,

place socket and drive socket handle on case

(25) and apply pressure to case until adjusting
holes in case and machine gun cradle (10) align.

11-7

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
11-2.

6650.50 CAL MACHINE GUN MOUNT-MAINTENANCE

INSTRUCTIONS

(cont)

REASSEMBLY (cont)

10 Place ammunition box (30) on ammunition

bracket (20) and lock cam (31).

ADJUSTMENT
1

Install a caliber .50 machine gun on the gun

mount as outlined in paragraph 2-2.

Place a full box of dummy ammunition

ammunition box tray.
---------------

2
3

into the

CAUTION
Do not load the ammunition into the machine gun.
3

The equilibrator should retain the machine gun

in a horizontal position when the travel locks are
disconnected.

The equilibrator spring should function to

counterbalance the weight of the machine gun
and ammunition.

Adjustment is made by placing socket on hexagon portion of case (1), holding the case to the machine gun
cradle. Remove hexagon head capscrew (2) and lockwasher (3) from the adjusting hole on the side of the
case. Using socket wrench, rotate case in the required direction until the machine gun is horizontal.

Install lockwasher (3) and hexagon head capscrew (2) into adjusting hole of case (1) and tighten.

11-8

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

CHAPTER 12
M548 MACHINE GUN MOUNT
Section I, UNITMAINTENANCEINSTRUCTIONS
12-1.

M548 MACHINE GUN MOUNT ATTACHING

INSTRUCTIONS

HARDWARE---MAINTENANCE

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Toolsand Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
DISASSEMBLY
1

If damaged, remove mouating hardware used to secure gun mount legs to hull.

If damaged, remove webbing straps.

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

Repair is by replacement of authorized parts (appx C).

REASSEMBLY
1

If removed, install webbing straps.

If removed, install mounting hardware used to secure gun mount legs to hull.

12-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE m.o. 11W2-8-1-322

Section II. DIRECT SUPPORT MAINTENANCE INSTRUCTIONS

12-2.

M548 MACHINE GUN MOUNT LEGS AND ATTACHING

INSTRUCTIONS

HARDWARE--MAINTENANCE

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

INITIAL SETUP
Toolsand Special Tools
Lifting Device
Sling (4-point)
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Self-locking nut (12) (MS21044-N8)

12-2

c. Reassembly

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
DISASSEMBLY
1

Remove 12 serf-locking nuts (1), 12 hexagon head capscrews (2), 12 flat washers (3), and 4 gun mount legs
(4, 5, 6, and 7) from M66 machine gun mount ring. Discard self-locking nuts.

If damaged, remove mounting hardware used to secure gun mount legs to hull.

If damaged, remove webbing straps (9).

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

M66 machine gun mount ring is a repairable assembly. Refer to paragraph 8-1.

Repair is by replacement of authorized parts (appx C).

REASSEMBLY
1

If emoved, install webbing straps {9).

If removed, install mounting hardware used to secure gun mount legs to hull.

Place 4 gun mount legs (4, 5, 6, and 7) on M66 machine gun mount ring (8) and secure with 12 flat washers
(3), 12 hexagon head capscrews (2), and 12 new self-locking nuts (1).

12.3/(12-4 blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE
T. O.11W2-8-1-322

CHAPTER13
MK93 MOD 0 MACHINE GUN MOUNT
(U. S. MARINE CORPS ONLY)
13-1.

MK93 MOD 0 MACHINE

GUN MOUNT-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

Repair

REPAIR
If MK93 Mod 0 machine gun mount (1) is damaged or broken, refer to Chapter 14 for maintenance.

Changel

13-1/(13-2 blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11 W2-8-1-322
CHAPTER 14
MK93 MOD 1 MACHINE GUN MOUNT

SECTION I. UNIT MAINTENANCE

14-1.

MK93 MOD 1 MACHINE GUN MOUNT-MAINTENANCE

INSTRUCTIONS
INSTRUCTIONS

THIS TASK COVERS:

Repair

------------6
--------

----------

----- -----

REPAIR
The MK93 MOD 1 machine gun mount consists of .50 caliber ammo holder assembly (1), MK93 MOD 0
machine gun mount (2), mounting bracket (3), catch bag assembly (4), universal pintle adapter (5),
traverse andelevation mechanism (6). Repair of individual components is contained in Chapter 14.

Change 4 14-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11W2-8-1-322
14-2.

YOKE ASSEMBLY AND CARRIAGE ASSEMBLY-MAINTENANCE INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit
(item 2, appx B)

DISASSEMBLY
1

Remove two headless shoulder pins (1)

from machine gun cradle (2).

By spreading ends of retaining ring, remove

quick-release pin (3) from yoke (4).

By spreading ends of retaining rings,

remove quick-release pin assembly (5) and
quick-release pin assembly (6) from machine
gun cradle (2).

2
5

INSPECTION/REPAIR
1

Inspect for broken, damaged,

parts.

For further disassembly of yoke assembly

and carriage assembly notify direct support
maintenance.

Repair is by replacement
(appx C).

or missing

of authorized

parts

REASSEMBLY
1

Install quick-release pin assembly (6) and

quick-release pin assembly (5) in machine gun
cradle (2).

Install quick-release

Install two headless shoulder pins (1) in

machine gun cradle (2).

14-2

Change 4

pin (3) in yoke (4).

4
3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11
W2-8-1-322
14-3.

.50 CALIBER AMMO HOLDER ASSEMBLY-MAINTENANCE INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit
(item 2, appx B)
Materials/Parts
Self-locking nut (4) (MS21044C3)
DISASSEMBLY
NOTE
Top bracket is a component of clamping
catch and cannot be ordered separately.
Take care not to lose or damage this item.

Remove two self-locking nuts (1), two

machine screws (2), and top bracket (3) from
ammo can holder (4). Discard self-locking nuts.

Remove two self-locking nuts (5), two machine

screws (6), and clamping catch (7) from ammo
can holder (4). Discard self-locking nuts.

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

If ammo can holder is broken or damaged,

repair is by replacement of next higher assembly.

Repair is by replacement
(appx C).

of authorized parts

REASSEMBLY

1 Install clamping catch (7) on ammo can holder

(4) with two machine screws (6) and two new self
locking nuts (5).
2

Install top bracket (3) on ammo can holder (4)

with two machine screws (2) and two new selflocking nuts (1).

Change 1 14-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11W2-8-1-322
14-4.

MOUNTING BRACKET-MAINTENANCE INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit
(item 2, appx B)

DISASSEMBLY
1

Pull headed shoulder pin (1) from weldment

bracket (2).

Spread ends of S-hooks and remove chain

assembly (3) from headed shoulder pin (1) and
weldment bracket (2).

Remove two handknobs (4).

INSPECTION/REPAIR

Inspect for broken, damaged, or missing parts.

If weldment bracket is broken or damaged,

repair is by replacement of next higher assembly

Repair is by replacement
(appx C).

of authorized parts

REASSEMBLY
1

Install two handknobs

bracket (2).

(4) on weldment

Install chain assembly (3) on weldment bracket

(2) and headed shoulder pin (1).

Install headed shoulder pin (1) in weldment

bracket (2).

14-4 Change 4

14-5.

CATCH BAG ASSEMBLY-MAINTENANCE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11W2-8-1-322
INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit
(item 2, appx B)

DISASSEMBLY
NOTE
When disassembling catch bag, pull
Velcro seal away from catch bag frame.
1

Open Velcro seals and remove catch bag (1)

from catch bag frame (2).

Spread ends of retaining-ring (3) and remove

quick-release pin (4) from catch bag frame (2).

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

If catch bag frame is broken or damaged,

repair is by replacement of next higher assembly

Repair is by replacement
(appx C).

of authorized

parts

REASSEMBLY
1

Spread ends of retaining ring (3) and install

quick-release pin (4) on catch bag frame (2).

Install casings bag (1), with Velcro unsealed,

onto catch bag frame (2). Close Velcro seals.

Change 1 14-5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11W2-8-1-322
114-6.

UNIVERSAL PINTLE ADAPTER-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit
(item 2, appx B)
Materials/Parts
Loctite (MIL-S-22473)

DISASSEMBLY
Remove machine screw (1) and quick-release pin
assembly (2) from body (3).

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

Repair is by replacement
(appx C).

of authorized parts

REASSEMBLY
Apply loctite to machine
screw (1). Install quick
release pin assembly (2) on body (3) and secure
with machine screw.

14-6

Change 4

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11W2-8-1-322
Section II. DIRECT SUPPORT MAINTENANCE INSTRUCTIONS
14-7.

MK93 MOD 0 MACHINE GUN MOUNT AND YOKE ASSEMBLY-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP Tools and Special Tools

Small Arms Repairman Tool Kit (item 2, appx 13)
Small Arms Shop Set (item 1, appx B)Materials/Parts
Self-locking nut (2) (MS21083C10)
Self-locking nut (MS21083-C16)Equipment
Conditions
14-2
Yoke assembly and carriage assembly partially disassembled
DISASSEMBLY
1

Remove and discard two self-locking nuts (1).

Remove two machine bolts (2) and carriage
assembly (3) from yoke (4).

Remove self-locking nut (5), flat washer (6),

mount pintle (7), and flat washer (8) from yoke (4
Discard self-locking nut.

INSPECTION/REPAIR
1
2

Inspect for broken, damaged, or missing parts.

5
/ng.",

Carriage assembly is a repairable assembly.

Refer to paragraph 14-8.
Repair is by replacement
(appx C)_

of authorized parts
6

REASSEMBLY
1

Install flat washer (8), mount pintle (7), and flat

washer (6) on yoke (4). Secure with new selflocking nut (5).

Install carriage assembly (3) on yoke (4).

Install two machine screws (2) and secure with
two new self-locking nuts (1).

Change 4

14-7

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11
W2-8-1-322
14-8.

CARRIAGE ASSEMBLY AND DEPRESSION STOP ASSEMBLY-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Loctite (MIL-S-22473)
Equipment Conditions
14-7
Carriage assembly

removed

DISASSEMBLY
1

Remove three hexagon capscrews (6) and

remove depression stop assembly (4).
Remove continuous stud (5) from depression
stop assembly (4).

With an open end wrench hold straight shaft

(9) by placing the wrench on wrench flats of
straight shaft. Remove hexagon capscrew
(7) and flat washer (8) from straight shaft (9).
While supporting rear slider assembly (10)
with one hand, pull straight shaft out through
rear brace support (11).

10
8

14-8

Change

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11W2-8-1-322
NOTE
Before removing the shock absorber
assemblies from the machine gun cradle,
note that the concave side of
the two spring tension washers (18) face
the slide assemblies. Also note the
notched cutout on the link deflectors (28)
and its position to the inside and front of the
machine gun cradle when configured for the
M2.

20
19

Remove three machine bolts (14) from side of

machine gun cradle (15). With an open end
wrench hold straight shaft (21) by placing the
wrench on wrench flats of straight shaft.
Remove hexagon capscrew (16) and flat
washer (17). Remove spring tension washer
(18), which is between front slide assembly
(19) and machine gun cradle. Remove shock
absorber assembly (20).

Pull straight shaft (21) out through shock

absorber mounting bracket (22).

Remove four machine screws (27) and link

deflector (28) from shock absorber mounting
bracket (22) and mount deflector (29).
Unscrew front slide assembly (19) from shock
absorber (30) and remove mount deflector.
Unscrew shock absorber mounting bracket
from shock absorber.

Steps 3 thru 6 are written and illustrated for

one shock absorber assembly but apply to
both.
3

27
28

0
21

23
30
22

Change

14-9

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11W2-8-1-322
14-8.

CARRIAGE ASSEMBLY AND DEPRESSION STOP ASSEMBLY-MAINTENANCE

INSTRUCTIONS (cont)

DISASSEMBLY (cont)
6

Remove two hexagon plain nuts (31) from

two setscrews (32). Remove setscrews from
machine gun cradle (15).

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing

parts.

Repair is by replacement
(appx C).

of authorized

1-0

parts

of shock absorber stops:

Rotate shock absorber assemblies (4) to

the up position, and install quick release
pin from yoke assembly (not shown).

Install two setscrews (1) into machine

gun cradle (2) until setscrews contact
shock absorber surface.

Install two hexagon plain nuts (3) on

setscrews. Ensure nuts are flush with
setscrews.

Back off setscrews between 1/4 and 1/2

turn, and tighten nuts clockwise to lock in
place.

4
(3

2
3

14-10

REASSEMBLY
1. Adjustment

Change 4

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11W2-8-1-322
NOTE
When installing the shock absorber
assemblies in the machine gun cradle,
ensure the concave side of the two
spring tension washers face the front
slide assemblies. Also ensure the
notched cutout on the link deflectors is
positioned to the inside and front of the
machine gun cradle when configured for
the M2.

9
12
13

Steps 2 thru 6 are written and illustrated

for one shock absorber assembly but
apply to both.
2

Screw shock absorber (4) on shock absorber

mounting bracket (5). Install mount deflector
(6) on shock absorber. Screw shock absorber
into front slide assembly (7). Install link
deflector (8). Apply Loctite to four machine
screws (9) and install screws in shock absorber
mounting bracket and mount deflector.

Slide mounting bracket (13) and spring

tension washer (14) onto straight shaft (12).

Install straight shaft (12) with assembled parts

through rear of shock absorber mounting
bracket (5) and front slide assembly (7).

14
4

Change

14-11

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11W2-8-1-322
14-8.

CARRIAGE ASSEMBLY AND DEPRESSION STOP ASSEMBLY-MAINTENANCE

INSTRUCTIONS (cont)

REASSEMBLY (cont)
is
5

Install shock absorber assembly (15) into

machine gun cradle (2).
18

Install flat washer (16) on hexagon capscrew

(17). Install hexagon capscrew through front of
machine gun cradle (2). Install spring tension
washer (18) on hexagon capscrew and screw
hexagon capscrew into front slide assembly
(7). Ensure shock absorber mounting bracket
(5) is properly positioned before tightening.
With and open end wrench, hold straight shaft
by placing wrench on wrench flats of the
straight shaft and tighen capscrew (17). Apply
loctite to three machine bolts (19) and install
machine bolts through side of machine gun
cradle and into mounting bracket (13).
Install rear slider assembly (23) in machine
gun cradle (2) with the mountirig hole down and
to the rear. Support rear slider assembly with
one hand while installing straight shaft through
rear brace support (24) and rear slider
assembly. Install flat washer (25) and hexagon
capscrew (26) on straight shaft (22). With and
open end wrench, hold straight shaft (22) by
placing wrench on wrench flats of the straight
shaft and tighen capscrew (26).

19
5
2

22
23

25 28

27
NOTE
Slotted end of continuous
stud should point
down and toward rear of machine gun cradle.
8

Apply loctite to three hexagon capscrews (27).

Install hexagon capscrews from inside of
machine gun cradle (2) in depression stop
assembly (30) on outside of cradle. Insert
continuous stud (29) into depression stop
assembly (30) and secure.

NOTE
Do not disassemble depression stop assembly
beyond removal of the continuous stud.

14-12

Change 1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11W2-8-1-322
14-9.

UNIVERSAL PINTLE ADAPTER, TRAVERSE ARM ASSEMBLY, AND UNIVERSAL PINTLE

ADAPTER BODY ASSEMBLY-MAINTENANCE INSTRUCTIONS

THIS TASK COVERS:a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Small Arms Shop Set (item 1, appx B)
Materials/Parts
Spring pin (MS16562-223)
Equipment
14-6

Conditions
Universal pintle adapter partially disassembled

6
9
C@>

DISASSEMBLY
1

Remove two shoulder bolts (1) and azimuth indicator (2) and travel lock (10) from adjustable arm (3).

Remove spring pin (4) from thumbscrew (5). Remove thumbscrew and adjustable arm (3) with
assembled parts from universal pintle adapter assembly (6).

Remove four machine screws (7) and retaining plate (8) from adjustable arm (3).

Remove sleeve bushing (9) from adjustable arm (3).

Change 4 14-13

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11W2-8-1-322
14-9.

UNIVERSAL PINTLE ADAPTER, TRAVERSE ARM ASSEMBLY, AND UNIVERSAL PINTLE

ADAPTER BODY ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)

DISASSEMBLY (cont)
X

Remove four machine screws (10) and

retaining plate (11) from body (12).

Remove sleeve bushing (13) from body (12).

Unscrew locking handle (14) from body (12)

and remove pawl (15).

Remove retainer screw (17) and split

sleeve (16).

15
16

Spread end of retaining ring (18) and remove

quick release pin and cable assembly (19)
from travel lock (20).

INSPECTION/REPAIR

Inspect for broken, damaged,or

parts.

If body is broken or damaged, repair is by

replacement of next higher assembly.

Repair is by replacement
(appx C).

missing

of authorized

parts

REASSEMBLY
1

Install split sleeve (4) and retaining screw (5).

NOTE
Do not over tighten locking handle when the
universal pintle adapter is not installed on
mount as the pawl will spread the split ring
out of round.

Install pawl (6) and screw locking handle (7)

into body (3 ).

Install sleeve bushing (2) into body (3).

Install retaining plate (1) with inscribed

markings and single white dot facing away
from arm of body (3). Apply loctite and
secure with four machine screws (8).

14-14

Change 4

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11W2-8-1-322
14
10

18
5

Install sleeve bushing (7) into adjustable arm (8).

Install retaining plate (9) with inscribed markings and white dot facing the traverse bar (14).
Secure with four machine screws (10).

Install adjustable arm (8), with white dots on retaining plates aligned, on body assembly (11).

Screw in thumbscrew

Spread ends of retaining ring (17) and install quick release pin and cable assembly (18) to travel lock
(16).

(12) and install new spring pin (13), leaving equal lengths protruding.

10 Install azimuth indicator (14) and travel lock (16) on adjustable arm (8) and secure with two shoulder
bolts (15). Ensure the azimuth indicator markings face outward. Azimuth indicator will still rotate
when fully tightened.

Change 4

14-15

ARMY TM 9-1006-245-13&P
MARINE CORPS TM 1005-13-&P/1
AIR FORCE T.O. 11 W2-8-1-322
14-10.

ELEVATION

MECHANISM-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

Repair
REPAIR
If elevation mechanism

14-16

Change 4

is damaged or broken, refer to paragraph 7-8 for repair.

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

CHAPTER 15
M6 MACHINE GUN PEDESTAL
SECTION I. UNIT MAINTENANCE
15-1.

M6 MACHINE GUN PEDESTAL

MOUNT

INSTRUCTIONS

MOUNT-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

Disassembly

Inspection/Repair

Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx 13)
Materials/Parts
Washer Lock (13) (MS35338-48)
Olive drab enamel (item 3, appx E)
Self-locking nut (13) (MS51922-37)
Personnel Required
1
Equipment Conditions
2-4 d. M6 machine gun pedestal mount removed from HMMWV

DISASSEMBLY

Remove four self-locking nuts (1) and four

hexagon head capscrews (2). Discard selflocking nuts (1).
Remove four lock washers (3) from between feet
of pedestal gun mount braces (4) and (5) and
mount weldment frame (6).

4
2
5

5
6

Change 3

15-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

15-1. M6 MACHINE GUN PEDESTAL MOUNT-MAINTENANCE INSTRUCTIONS (cont)

DISASSEMBLY (cont)

Remove two self-locking nuts (7), two

lockwashers (8), and two pedestal gun
mount braces (5). Discard self-locking
nuts (7) and lockwashers (8).

9
7

Remove two self-locking nuts (9), two

lockwashers (110),and two pedestal
gun mount braces (4) from straight
threaded pin (11.). Discard self-locking
nuts (9) and lockwashers (10).

8
5

Remove self -locking nut (12),

lockwasher (13), hex head screw (14),
and telescoping tube assembly (15)
from aclapterand flange (16). Discard
self-locking nut (12) and lockwasher
(13).
Remove four self-locking nuts (117),
four lockwashers (18), four hexagon
head capscrews (19), and adapter and
flange (16) from mount weldment
frame (6). Discard self-locking nuts
(17) and lockwashers (18).

16
14

Change

13)
12

17
18
6

15-2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322
30

26
22

21
20

Remove straight threaded pin (20), and retaining collar (21) from telescoping tube assembly (15).

Disengage quick release pin (22) from telescoping tube assembly (15).

Separate internal structural tube (23) from external structural tube (24)

Remove wire cord (25) from ring gofquick release pin (22).

Remove threaded insert (26) from external structural tube (24). and separate wire cord (25) from threaded
insert (26)

Remove threaded insert (27) from other side of external structural tube (24).

Fully unscrew handle assembly (28) until it stops in insert (29).

Holding handle assembly (28), unscrew externally threaded insert (29) and remove retaining clamp
assembly (30) from internal structural tube (23).

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

If mount weldment frame (6) is broken or damaged, repair is by replacement of next higher assembly.

Touch up external bright metal surfaces with olive drab enamel paint (item 3, appx E)

Repair is by replacement

of authorized parts (appx C).

Change 4 15-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
15-1. M6 MACHINE GUN PEDESTAL MOUNT-MAINTENANCE

INSTRUCTIONS (cont)

REASSEMBLY
NOTE
The front of the external structural tube (24) is considered to be that side which faces you when
the internal structural tube (23) is installed and the retaining clamp assembly (30) is on the right
side.

28
30

22
22

Fully screw in handle assembly (28) until it stops in threaded insert (29). Holding handle assembly (28),
screw threaded insert (29) into internal structural tube (23) securing retaining clamp assembly (30).

Install threaded insert (27) in rear side of external structural tube (24).

Insert wire cord (25) on threaded insert (26) and install into front side of external strucural tube (24).

Install ring of quick release pin (22) on wire cord (25).

If replaced, lubricate new internal structural tube (23) with general purpose lubricating oil (item 7, appx E)
and install in external structural tube (24) with retaining clamp assembly (30) to the right.

Engage quick release pin (22) in telescoping tube assembly (15).

Install retaining collar (21) with threaded studs to the front, and straight threaded pin (20) in telescoping tube
assembly (15).

15-4 Change 3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322

Install adapter and flange (16) on mount weldment

frame (6) using four hexagon head capscrews
(19), four new lockwashers (18), and four new
self-locking nuts (17).

NOTE
Do not over tighten hex head screw
(14). If overtightened the internal
structural tube will not freely move
inside the external structual tube when
raising or lowering.
9

13
16
17
18
6

Install telescoping tube assembly (15) into adapter

and flange (16) and secure with hex head screw
(14), new lockwasher (13), and new self-locking
nut (12).

CAUTION
Pedestal gun mount braces have a top and bottom, and it is possible to install them wrong side
up. Your pedestal gun mount braces are marked DN (down) to indicate the bottom end (or floor
end). Make sure that each end of the pedestal gun mount braces are flush with the external
structural tube and the mount weldment frame before any hardware is installed. Do not force
hardware on if pedestal gun mount braces are not flush.

9
10

Position two pedestal gun mount braces (5) (with

ends marked DN on the mount weldment frame)
on retaining collar (21) and loosely install, two new
lockwashers (8), and two new self-locking nuts
(7).

(D9

9
1@

0
7
5

4
11

Set two pedestal gun mount braces (4) (with ends

marked DN on the mount weldment frame) in
place on straight threaded pin (11) and loosely
install, two new lockwashers (10), and two new
self-locking nuts (9).
8
7

Change

15-5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

15-1. M6 MACHINE GUN PEDESTAL MOUNT-MAINTENANCE

REASSEMBLY

INSTRUCTIONS

(cont)

4
9

2
5

5
6

Install four lockwashers (3) between feet of pedestal gun mount braces (4) and (5) and mount weldment
frame (6).

Install four hexagon head capscrews (2) and four new self-locking nuts (1).

Securely tighten self-locking nuts (1), (7), and (9).

15-6

Change 3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

15-2.

SECTION II. DIRECT SUPPORT MAINTENANCE

INSTRUCTIONS

M6 MACHINE GUN PEDESTAL MOUNT-MAINTENANCE

INSTRUCTIONS

THIS TASK COVERS:

There are no direct support repair procedures.
paragraph

For maintenance

repair refer to unit maintenance

procedures,

15-1.

Change 3

15-7/(15-8 blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

CHAPTER 16
M197 MACHINE GUN MOUNT
Section I. UNIT MAINTENANCE INSTRUCTIONS
16-1. M197 MACHINE GUN MOUNT-MAINTENANCE INSTRUCTIONS
THIS TASK COVERS:
a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Materials/Parts
Lockwasher (2) (MS35338-45)
Self-locking nut (1) (MS21044N6)

Retaining Ring (2) (MS16624-1043)

Equipment Conditions
2-4 a. M197 Machine Gun Mount removed from M6 Pedestal or HMMWV pintle adapter
DISASSEMBLY

M O
P IN
P /N
(M 2

U N
T L
1 2
4 9

T
E

9 8 6 1 0 2
a n d M 2 4 0 B )

$
!
&
#

%

"

Remove self-locking nut (1), two flat washers (2), hexagon head capscrew (3), and travel lock bracket (4)
from travel lock bracket assembly (5). Discard self-locking nut (1).

Remove two machine bolts (6), two lockwashers (7), and separate travel lock bracket assembly (5) into two
halves (8). Discard two lockwashers (7).
Change 5

16-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

16-1. M197 MACHINE GUN MOUNT-MAINTENANCE INSTRUCTIONS (cont)

DISASSEMBLY (cont)

#
"

!

Remove quick release pin (9) from cable assembly

(10).

Separate cable assembly (10) from retaining ring

(11).

Remove retaining ring (11) from travel lock bracket

(4).

NOTE
Items 12-18 apply only when mounting an M60 and
are located in the Additional Authorization List
(AAL), appendix F.
6

Remove two retaining clips (12) and headless

grooved pin (13) and separate sleeve spacer (14),
and travel lock adapter assembly (15) from travel
lock bracket (4). Discard retaining clips (12).
Separate stud plunger (16) and compression helical
spring (17) from travel lock adapter assembly (15).

For disassembly of mount pintle (PN 11010408) (18)

refer to paragraph 6-3. For disassembly of mount
pintle (PN 12986102) (19) refer to paragraph 16-1A.

Remove socket head capscrew (20) and wire rope

assembly (21) from pintle adapter (22).

10 Remove quick release pin (23) from wire rope

assembly (21).

16-2

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

If travel lock bracket assembly is broken or damaged, repair is by replacement of next higher assembly.

If pintle adapter is broken or damaged, repair is by replacement of next higher assembly.

For inspection and repair of mount pintle (18) refer to paragraph 6-3 and for mount pintle (19) refer to
paragraph 16-1A.

If travel lock assembly is broken, bent or damaged, repair is by replacement of next higher assembly.

Repair is by replacement of authorized parts (appx C).

REASSEMBLY

Attach quick release pin (23) to wire rope assembly (21).

Install wire rope assembly (21) on pintle adapter (22) using socket head capscrew (20).

For reassembly of mount pintle (18) refer to paragraph 6-3. For reassembly of mount pintle (19) refer to
paragraph 16-1A.

Change 5

16-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

16-1. M197 MACHINE GUN MOUNT-MAINTENANCE INSTRUCTIONS (cont)

REASSEMBLY (cont)
NOTE
Items 12-18 apply only when mounting an M60 and are located in the Additional Authorization
List (AAL), appendix F.
4

Install compression helical spring (17) and stud plunger (16) in travel lock adapter assembly (15).

Assemble travel lock adapter assembly (15), sleeve spacer (14), and headless grooved pin (13) into clevis of
travel lock bracket (4) and secure with two new retaining clips (12).

Attach retaining ring (11) to travel lock bracket (4).

Attach cable assembly (10) to retaining ring (11).

Attach quick release pin (9) to cable assembly (10).

Assemble two halves (8) of travel lock bracket assembly (5) using two new lockwashers (7) and two machine
bolts (6).

10 Assemble travel lock bracket assembly (5) to travel lock bracket (4) using two flat washers (2), hexagon head
capscrew (3), and new self-locking nut (1).

&
%

$
!

#
#

"

!
"
%

$

16-4

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

16-1A. MOUNT PINTLE - MAINTENANCE INSTRUCTIONS

THIS TASK COVERS:
a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Personnel Required
1
Equipment Conditions
16-1 Pintle assembly removed

DISASSEMBLY
Remove capscrew (1), cable assembly (2), and quick release pin (3) from pintle assembly (4).

1
4
3
2

INSPECTION/REPAIR
1

Inspect for broken, damaged, or missing parts.

If pintle (4) is broken or damaged, repair is by replacement of next higher assembly.

Repair is by replacement of authorized parts (appx C).

REASSEMBLY
Install quick release pin (3), cable assembly (2), and cap screw (1) to pintle assembly (4).

Change 5

16-4.1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

16-1B. AMMO ADAPTER BRACKET ASSEMBLY AND DEFLECTOR - MAINTENANCE

INSTRUCTIONS
THIS TASK COVERS:
a. Disassembly

b. Inspection/Repair

c. Reassembly

INITIAL SETUP
Tools and Special Tools
Small Arms Repairman Tool Kit (item 2, appx B)
Personnel Required
1
Equipment Conditions
Deflector removed

DISASSEMBLY
NOTE
For additional maintenance of Ammo Adapter Bracket Assembly and Deflector, refer to
TM 9-1005-313-23&P.
Remove two cap screws (1) and two nuts (2) and deflector plate (3) from ammo adapter bracket assembly (4).
2

4
3

INSPECTION/REPAIR
1

Inspect for broken or damaged parts.

Repair is by replacement of authorized parts (see Additional Authorization List (AAL), appendix F).

REASSEMBLY
Install the deflector plate (3) on ammo adapter bracket assembly (4) with the two cap screws (1) and two nuts (2).
16-4.2

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

SECTION II. DIRECT SUPPORT MAINTENANCE INSTRUCTIONS

16-2. M197 MACHINE GUN MOUNT-MAINTENANCE INSTRUCTIONS
THIS TASK COVERS:
There are no direct support repair procedures. For maintenance repair refer to unit maintenance procedures,
paragraph 16-1, 16-1A, and 16-1B.

Change 5

16-5/(16-6 blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

APPENDIX A
REFERENCES
A-1. TECHNICAL MANUALS (TM)
TM 9-1005-201-10................................ Operators Manual: M249 Machine Gun
TM 9-1005-213-10................................ Operators Manual: Machine Gun, .50 Cal, Browning, M2, Heavy Barrel,
Flexible w/e (1005-322-9715) Mount, Tripod, Machine Gun, .50 Cal, w/e
(1005-322-9716) Mount, Machine Gun, Anti-aircraft, .50 Cal, M63 w/e
(1005-673-3246)
TM 9-1005-224-10................................ Operators Manual: M60 Machine Gun
TM 9-1005-313-10................................ Operators Manual: Machine Gun, 7.62MM, M240 Series
TM 9-1005-313-23&P ........................... Unit and Direct Support Maintenance Manual (Including Depot
Maintenance Repair Parts) for Machine Gun, 7.62MM, M240 Series
TM 9-1010-230-10................................ Operators Manual: MK19 Mod 3 40MM Machine Gun
TM 9-1010-231-13&P ........................... MK64 Machine Gun Mount
TM 9-1300-206 ..................................... Ammunition Explosive Standards
TM 9-2320-280-20-3............................. Unit Maintenance Manual for Truck, Utility Cargo/Troop Carrier, 1-1/4
Ton, 4 x 4, M998 (NSN 2320-01-107-7155) (EIC: BBD); Armament
Carrier Armored, 1-1/4 Ton, 4x4, M1025 (2320-01-128-9951) (EIC: BBF);
Armament Center, Armored, 1-1/4 Ton, 4 x 4, W/Winch, M1026 (232001-128-9552) (EIC: BBG)
TM 750-244-6 ....................................... Procedures for Destruction of Equipment in Federal Supply Classifications
1000, 1005, 1010, 1015, 1020, 1025, 1030, 1055, 1090, and 1095 to
Prevent Enemy Use

A-2. DEPARTMENT OF THE ARMY (DA) FORMS

DA Form 2028 ...................................... Recommended Changes to Publications and Blank Forms
DA Form 2028-2 ................................... Recommended Changes to Publications and Blank Forms
DA Form 2404 ...................................... Equipment Inspection and Maintenance Worksheet
DA Form 2407 ...................................... Maintenance Request

A-3. MARINE CORPS DATA

MCO 4855.10 ....................................... Quality Deficiency Report
MCO P4610.19..................................... Transportation and Travel Record of Transportation Discrepancies

Change 5

A-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

A-3. MARINE CORPS DATA (cont)

MCO P4450.7 ....................................... Marine Corps Warehousing Manual
MCO P4790.2 ....................................... Administrative Storage of Equipment
NAVMC 10772...................................... Recommended Changes to Publications/Logistics Maintenance Date
Coding
TM 4700-15/1 ....................................... Marine Corps Tactical Equipment Record Procedure: Record
Maintenance

A-4. TECHNICAL ORDERS (TO)

TO 00-35D-54....................................... Materiel Deficiency Reporting and Investigation System
TO 11W-1-10........................................ Historical Data Recording of Inspection, Maintenance, and Firing Data
For Ground Weapons
TO 33K-1-100 ....................................... (TMDE) Interval Calibration and Repair Reference Guide and Work Unit
Code Manual

A-5. OTHER
AFTO Form 22...................................... Technical System Publication Improvement Report
AR 750-1............................................... Army Material Maintenance Policy and Retail Maintenance Operations
CTA 8-100 ............................................ Army Medical Department Expendable/Durable Items
CTA 50-970 .......................................... Modified Table of Organization and Equipment (MTOE)
DA PAM 25-30...................................... Consolidated Index of Army Publications and Blank Forms
DA PAM 738-750.................................. The Army Maintenance Management System (TAMMS)
FM 21-11 .............................................. First Aid for Soldiers
FM 23-14 .............................................. Machine Gun, 5.56MM, M249
FM 23-27 .............................................. MK19, 40MM Grenade Machine Gun Mod 3
FM 23-65 .............................................. Browning, Machine Gun, .50 Cal, HB, M2
FM 23-67 .............................................. Machine Gun, 7.62MM, M60
SF 364 .................................................. Report of Discrepancy (ROD)
SF 368 .................................................. Product Quality Deficiency Report

A-2

Change 3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W-28-1-322

APPENDIX
MAINTENANCE

ALLOCATION

CHART (MAC)

Section I. INTRODUCTION
B-1.

THE ARMY MAINTENANCE

SYSTEM MAC

This section provides a general explanation of all maintenance and repair functions authorized
a.
maintenance levels under the standard Army Maintenance System concept.

at various

The Maintenance Allocation Chart (MAC) in section 11designates overall authority and responsibility for
b.
the performance of maintenance functions on the identified end item or component. The application of the
maintenance functions to the end Rem or component will be consistent with the capacities and capabilities of the
designated maintenance levels, which are shown on the MAC in column (4) as:
Unit-includes

two subcolumns,

Direct Support-includes
General Support-includes
Depot-includes

C (operator/crew)

and 0 (unit) maintenance.

an F subcolumn.
an H subcolumn.

a D subcolumn.

Section III lists the tools and test equipment (both special tools and common tool sets) required for each
c.
maintenance function as referenced from section II.
Section IV contains supplemental
d.
function.

instructions

B-2.
MAINTENANCE
FUNCTIONS.
(except for ammunition MAC):

and explanatory

notes for a particular

maintenance

maintenance functions are limited to and defined as follows

a. Inspect. To determine the serviceability of an item by comparing its physical, mechanical, and/or
electrical characteristics with established standards through examination (e.g., by sight, sound, or feel).
b. Test. To verify serviceability by measuring the mechanical, pneumatic, hydraulic, or electrical
characteristics of an item and comparing those characteristics with prescribed standards.
c. Service. Operations required periodically to keep an item in proper operating condition, e.g., to clean
(includes decontaminate, when required), to preserve, to drain, to paint, or to replenish fuel, lubricants, chemical
fluids, or gases.
d. Adjust. To maintain or regulate, within prescribed limits, by bringing into proper position or by setting the
operating characteristics to specified parameters.
'Exception is authorized for ammunition MACs to permit use of maintenance function headings that better
describe or identify ammunition maintenance functions. The headings used and their definitions shall be included
in the appropriate ammunition technical manual(s).
Change 1

B-1

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIRFORCET.O. 11W2-8-1-322

B-2.

MAINTENANCE

FUNCTIONS

(cont)

Align. To adjust specified variable elements of an item to bring about optimum or desired performance.

Calibrate. To determine and cause corrections to be made or to be adjusted on instruments or test,

f.
measuring, and diagnostic equipment used in precision measurement. Consists of comparisons of two
instruments, one of which is a certified standard of known accuracy, to detect and adjust any discrepancy in the
accuracy of the instrument being compared.
Remove/install. To remove and install the same item when required to perform service or other
g.
maintenance functions. Install may be the act of emplacing, seating, or fixing into position a spare, repair part, or
module (component or assembly) in a manner to allow the proper functioning of an equipment or system.
Replace. To remove an unserviceable item and install a serviceable counterpart in its place. "Replace" is
h.
authorized by the MAC and assigned maintenance level is shown as the 3d position code of the SMR code.
i.
Repair. The application of maintenance services2, including fault location/troubleshooting,
removal/
installation, and disassembly/assembly
procedures, and maintenance actions to identify troubles and restore
serviceability to an item by correcting specific damage, fault, malfunction, or failure in a part, subassembly,
module (component or assembly), end item, or system.
Overhaul. That maintenance effort (service/action) prescribed to restore an item to a completely
j.
serviceable/operational condition as required by maintenance standards in appropriate technical publications (i.e.,
DMWR). Overhaul is normally the highest degree of maintenance performed by the Army. Overhaul does not
normally return an item to like new condition.
Rebuild. Consists of those services/actions necessary for the restoration of unserviceable equipment to
k.
a like new condition in accordance with original manufacturing standards. Rebuild is the highest degree of
materiel maintenance applied to Army equipment. The rebuild operation includes the act of returning to zero
those age measurements (e.g., hours/miles) considered in classifying Army equipment1components.
B-3.

EXPLANATION

OF COLUMNS

IN THE MAC, SECTION

a. Column 1, Group Number. Column 1 lists functional group code numbers, the purpose of which is to
identify maintenance significant components, assemblies, subassemblies, and modules with the next higher
assembly.
Column 2 contains the names of components,
b. Column 2, Component/Assembly.
subassemblies, and modules for which maintenance is authorized.

assemblies,

Column 3, Maintenance Function. Column 3 lists the functions to be performed on the item listed in
c.
column 2. (For detailed explanation of these functions, refer to para B-2).
2

Services-inspect,

test, service, adjust, align, calibrate, and/or replace.

Fault location/troubleshooting-the
process of investigating and detecting the cause of equipment
malfunctioning; the act of isolating a fault within a system or unit under test (UUT).
3

Disassembly/assembly-the
step-by-step breakdown (taking apart) of a spare/functional group coded item to
the level of its least component, that is assigned an SMR code for the level of maintenance under consideration
(i.e., identified as maintenance significant).
4

5 Actions-welding,
B-2

grinding, riveting, straightening, facing, machining, and/or resurfacing.

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
d. Column 4, Maintenance Level. Column 4 specifies each level of maintenance authorized to
perform each function listed in column 3 by indicating work time required (expressed as man-hours in
whole hours or decimals) in the appropriate subcolumn. This work-time figure represents the active time
required to perform that maintenance function at the indicated level of maintenance. If the number or
complexity of the tasks within the listed maintenance function vary at different maintenance levels,
appropriate work-time figures are shown for each level. The work-time figure represents the average time
required to restore an item (assembly, subassembly, component, module, end item, or system) to a
serviceable condition under typical field operating conditions. This time includes preparation time
(including any necessary disassembly/assembly
time), troubleshooting/fault location time, and quality
assurance time in addition to the time required to perform the specific tasks identified for the maintenance
functions authorized in the MAC. The symbol designations for the various maintenance levels are as
follows:
C ....................................................................
0 ...................................................................
F ....................................................................
H ....................................................................
L ....................................................................
D ....................................................................

Operator or crew maintenance

Unit maintenance
Direct support maintenance
General support maintenance
Specialized Repair Activity (SRA)6
Depot maintenance

e. Column 5, Tools and Equipment. Column 5 specifies, by code, those common tool sets (not
individual tools), common TMDE, and special tools, special TMDE, and special support equipment
required to perform the designated function. Codes are keyed to tools and test equipment in section Ill.
f. Column 6. Remarks. When applicable, this column contains a letter code, in alphabetical
which is keyed to the remarks contained in section IV.
EXPLANATION
SECTION Ill

B-4.

OF COLUMNS

IN TOOL AND TEST EQUIPMENT

a. Column 1, Reference Code. The tool and test equipment

used in the MAC, section II, column 5.
b. Column 2, Maintenance
test equipment.
Column 3, Nomenclature.

Name or identification

Column 4, National Stock Number.

Column 5, Tool Number.

REQUIREMENTS,

reference code correlates with a code

Level. The lowest level of maintenance

order,

authorized

to use the tool or

of the tool or test equipment.

The National Stock Number of the tool or test equipment.

The manufacturer's

part number, model number, or type number.

6This maintenance level is not included in section 11,column (4) of the MAC. Functions to this level of
maintenance are indicated by a work-time figure in the "H" column of section 11,column (4), and an
associated reference code is used in the Remarks column (6). This code is keyed to section IV, Remarks,
and the SRA complete repair application is explained there.

Change 2

B-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
B-5.

EXPLANATION OF COLUMNS IN REMARKS, SECTION IV

a. Column 1, Reference Code. The code recorded in column 6, section 11.

b. Column 2, Remarks. This column lists information pertinent to the maintenance function being
performed as indicated in the MAC, section II.
Section

(3)

(2)

(1)

GROUP
NUMBER

II. MAINTENANCE ALLOCATION

FOR GUN MOUNTS

COMPONENT/
ASSEMBLY

(4)

MAINTENANCE
FUNCTION

UNIT
C

0201

0202

0401

Mount, Tripod,
Machine Gun, M122
(7790723)

Inspect
Service
Repair

0.3
0.3

Mount, Tripod,
M122A1
(12976949)

Inspect
Service
Replace
Repair

0.3
0.3

Inspect
Replace
Repair

0.3

Inspect
Replace
Repair

0.2

Inspect
Replace
Repair

0.1

Elevating and
Traversing
Mechanism
(7791119)
Tripod, Leg Assembly
(16976948)
Leg, Tripod Mount
(5559337)
Lock Assembly,
Pintle
(6108986)

Replace
Repair

Pintle, Mount
(11010408)
(M-122 only)

Replace
Repair

Flexible Gun Mount

(12976940)
(M122A1 only)

Inspect
Service
Replace
Repair

Cradle Assembly,
Upper
(12597091)

Replace
Repair

B-4 Change 2

CHART

MAINTENANCE
DS
0
F

0.3
0.3
0.1
0.3
0.3
0.1
0.2

0.8

LEVEL
GS
DEPOT
H
D

1.0

(5)
TOOLS
AND
EQUIPMENT
REF
CODE

1,2

0.2

0.1

1,2,3

0.5

1,2,3

0.3
0.3

1,2

0.1
0.2
0.3

1,2

0.2
0.3

0.2

1,2

0.3
0.3

0.2
0.1
0.1
0.1

0.1

0.3
0.3

0.3
0.3
0.8

1,2
1,2

0.5
0.5

1,2
1,2

(6)

REMARKS
CODE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Section III. MAINTENANCE ALLOCATION CHART
FOR GUN MOUNTS (cont)
(3)

(2)

(4)

(5)

(6)

AND
EQUIPMENT
REF
CODE

REMARKS
CODE

TOOLS
GROUP
NUMBER

COMPONENT/
ASSEMBLY

Mount, Tripod,
Machine Gun, M3
(8403398)

MAINTENANCE
FUNCTION

Inspect
Service
Replace
Repair

MAINTENANCE LEVEL
UNIT
DS
GS
DEPOT
C
0
F
H
D

0.3
0.3

0.3
0.3
0.3
0.3

0.3

1.3

1,2

Head,Bearing
Assembly
(8448211)

Repair

0.3

1,2

Bolt, Machine
(6108395)

Replace
Repair

0.1
0.1

1,2

Leg, Tripod Mount

(6507137)

Replace
Repair

0.3
0.6

1,2

Leg, Tripod Mount

(5559423)

Replace
Repair

0.3
0.6

1,2

Leg, Tripod Mount

(6507136)

Replace
Repair

0.3
0.6

1,2

Elevation Mechanism
(5574621)

Inspect
Replace
Repair

03
04
05
06

07
00

Latch, Pintle Mount

(6108402)

Replace
Repair

Ring, Mount, Machine

Gun, M66
(7012810)

Inspect
Service
Replace
Repair

Ring Assembly
(7012727)

Repair

0101

Ring Assembly (7012725)

Replace
Repair

0102

Ring
(7070704)

Inspect
Replace
Repair

Brake, Ring
(7012801)

Replace
Repair

0103

0.3

0.3
0.1

1,2,3
0.5
0.2
0.3

0.3
0.3

1,2

0.3
0.3
1.5
0.5
0.3

0.3

2
2.5

1,2

0.1
0.3

2
2

0.3
0.8
0.8

1,2
1,2

0.5
0.5

1,2
1,2

Change 2 B-5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Section II. MAINTENANCE ALLOCATION CHART
FOR GUN MOUNTS (cont)
(1)

(2)

(3)

(4)

GROUP
NUMBER

COMPONENT/
ASSEMBLY

MAINTENANCE
FUNCTION

MAINTENANCE LEVEL
UNIT
DS
GS
DEPOT
C
0
F
H
D

0401

M240E1 Flexible
Machine Gun Mount
(12597090)

Inspect
Service
Replace
Repair

Cradle Assembly,
Upper
(12597091)

Replace
Repair

Mount, Machine Gun,

M142
(10900945)

Inspect
Service
Replace
Repair

0.3
0.3

Platform Assembly
(10900947)

Repair

Mount, Machine Gun,

Cal .50, 6650
(7046650)

Inspect
Service
Replace
Repair

0.3
0.3

Machine Gun Mount,

M548
(11631740-2)

Inspect
Service
Repair

0.3
0.3

Ring, Mount, Machine

Gun, M66
(7012810)

Inspect
Service
Replace
Repair

0.3
0.3

0101

Ring Assembly
(7012727)

Repair

010101

Ring Assembly
(7012725)

Replace
Repair

010102

Ring
(7070704)

Inspect
Replace
Repair

Brake, Ring
(7012801)

Replace
Repair

010103

B-6 Change 2

0.3
0.3

0.3
0.3
0.3
0.3

(5)
TOOLS
AND
EQUIPMENT
REF
CODE

0.3
0.3
0.8

1,2
1,2

0.5
0.5

1,2
1,2

0.3

0.8

2
1,2

0.3

1,2

0.5
0.3
0.3
0.3

0.3

0.3
0.3
0.3

0.3

0.8

1.5

1,2

0.3
0.3
1.5
2

0.5
0.3

0.3

2.5

1,2

0.1
0.3

2
2

0.3
0.8
0.8

1,2
1,2

0.5
0.5

1,2
1,2

(6)

REMARKS
CODE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Section II. MAINTENANCE ALLOCATION CHART
FOR GUN MOUNTS (cont)
(1)

(2)

(3)

(4)

GROUP
NUMBER

COMPONENT/
ASSEMBLY

MAINTENANCE
FUNCTION

MAINTENANCE LEVEL
UNIT
DS
GS
DEPOT
C
0
F
H
D

0101

010101

0102

Stop Assembly,
Depression
(6650651)

Inspect
Service
Replace
Repair

0.3
0.3

Inspect
Service
Replace
Repair

0.3
0.3

Mount, Machine Gun,

MK93 Mod 1
(6650717)

Inspect
Service
Repair

0.3
0.3

Mount, Machine Gun,

MK93 Mod 0
(6650450)

Inspect
Service
Repair

0.3
0.3

Carriage Assembly
(6650434)

Inspect
Service
Replace
Repair

0.3
0.3

Inspect
Service
Replace
Repair

0.3
0.3

Inspect
Service
Replace
Repair

0.3
0.3

Holder Assembly,
Ammo,.50 Caliber
(6650724)

Inspect
Service
Repair

0.3
0.3

Bracket, Mounting
(12929150)

Inspect
Service
Repair

0.3
0.3

Yoke assembly
(6650725)

Stop Assembly,
Depression
(6650651)

Yoke Assembly
(6650725)

(6)
(5)
TOOLS
AND
EQUIPMENT
REF
REMARKS
CODE
CODE

0.3
0.3
0.1
0.4

1,2

0.3
0.3
0.1
0.3

1,2

0.8

1,2

0.6

1,2

0.1
1.5

1,2

0.1
0.4

1,2

0.1

0.3
0.3
0.1
0.3

1,2

0.3
0.3
0.1

0.3

1,2

0.3
0.3
0.1

0.3

1,2

0.3
0.3

0.3
0.3
0.1
0.3
0.3

0.3
0.3
0.5
0.3
0.3

0.3
0.3

Change

B-7

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Section III. MAINTENANCE ALLOCATION CHART
FOR GUN MOUNTS (cont)
(1)(2)

GROUP
NUMBER

0501

0502

B-8

COMPONENT/
ASSEMBLY

Catch Bag Assembly

(6650723)

(3)

(4)

MAINTENANCE
FUNCTION

MAINTENANCE LEVEL
UNIT
DS
GS
DEPOT
C
0
F
H
D

Inspect
Service
Repair

0.3
0.3

Universal Pintle
Adapter
(12012061)

Inspect
Service
Repair

0.3
0.3

Arm Assembly,
Traverse
(6650488)

Inspect
Service
Replace
Repair

0.3
0.3

Inspect
Service
Repair

0.3
0.3

Inspect
Service
Repair

0.3
0.3

M6 Machine Gun
Pedestal Mount
(12956270)

Inspect
Replace
Repair

0.3

M1 97 Machine Gun
Mount (12956264)

Inspect
Replace
Repair

0.2

Inspect
Replace
Repair

0.2

Bracket Assembly,
Travel Lock
(5830063)

Inspect
Replace
Repair

0.1

Pintle Adapter
Assembly (5830131)

Inspect
Replace
Repair

0.1

Body Assembly,
(12012062)

Elevation Mechanism
(5574621)

Travel Lock
Assembly (12956265)

Change

0.3
0.3
0.1

(6)
(5)
TOOLS
AND
EQUIPMENT
REF
REMARKS
CODE
CODE

0.3

1,2

0.3

1,2

0.1
0.3

1,2

0.3

1,2

0.3

1,2

0.3
0.3

0.3
0.5
0.3

0.2
0.2
0.3

0.2
0.2
0.2

1,2

0.1
0.1
0.1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Section II. MAINTENANCE ALLOCATION CHART

FOR GUN MOUNTS (cont)
NOTE
This section applies to Army users only.
(1)

(2)

(3)

GROUP
NUMBER

COMPONENT/
ASSEMBLY

MAINTENANCE
FUNCTION

Pintle, Mount
(11010408)
Pintle Assembly
(12986102)

Deflector Kit
(12986106)

Gun Mount Adapter

(NPN)

Replace
Repair
Inspect
Service
Repair
Inspect
Service
Install
Replace
Repair
Inspect
Service
Replace
Repair

(4)

(5)
(6)
TOOLS
AND
EQUIPMENT
MAINTENANCE LEVEL
REF
REMARKS
UNIT
DS GS DEPOT
CODE
CODE
C
O
F
H
D
0.1
0.2
1,2
0.3 0.3
0.3 0.3
0.3
2
0.1 0.1
0.2 0.2
0.2
0.2
2
0.1
0.1 0.1
0.1 0.1
0.2
0.2
2

Section Ill. TOOL AND TEST EQUIPMENT REQUIREMENTS

FOR GUN MOUNTS
TOOL OR
TEST
EQUIPMENT MAINTENANCE
LEVEL
REF CODE

NOMENCLATURE

NATIONAL
STOCK NUMBER

TOOL NUMBER

Shop Set, Small Arms: Field

4933-00-754-0664
Maintenance, Basic, Less Power

SC 4933-95-A11

Tool Kit, Small Arms Repairman

5180-01-462-4254

SC 5180-95-B71

Wrench, Spanner

5120-00-077-2081

8436748

Section IV REMARKS
Not applicable.

Change 5

B-9/(B-10 blank)

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11
W2-8-1-322

APPENDIX C
UNIT AND DIRECT SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
Section
C-1 .

I. INTRODUCTION

SCOPE

This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic
equipment (TMDE); and other special support equipment required for performance of unit and direct support
maintenance of the gun mounts. It authorizes the requisitioning, issue, and disposition of spares, repair parts, and
special tools as indicated by the Source, Maintenance, and Recoverability (SMR) codes.
C-2.

GENERAL

In addition to Section I, Introduction,

this Repair Parts and Special Tools List is divided into the following sections:

a.
Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. The list also includes parts which must be removed for replacement of the
authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the
parts in each group listed in ascending figure and item number sequence. Bulk materials are listed in item name
sequence. Repair parts kits are listed separately in their own functional group within Section 11.Repair parts for
repairable special tools are also listed in this section. Items listed are shown on the associated illustration(s)/
figure(s).
b. Section Ill. Special Tools List. A list of special tools, special TMDE, and other special support
equipment authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND
USABLE ON CODE column) for the performance of maintenance.
c.
Section IV. Cross-reference
Index. A list, in National Item Identification Number (NIIN) sequence, of all
National stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of all part
numbers appearing in the listing. National stock numbers and part numbers are cross- referenced to each
illustration figure and item number appearance. The figure and item number index lists figure and item numbers in
alphanumeric sequence and cross-references NSN, CAGEC, and part numbers.

Changel

C-1

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIRFORCET.O. 11
W2-8-1-322

C-3.
a.

EXPLANATION OF COLUMNS (SECTIONS II AND III)

ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.

b. SMR CODE (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position
code containing supply/requisitioning information, maintenance level authorization criteria, and disposition
instruction, as shown in the following breakout:

Recoverability
Code

Maintenance
Code

Source
Code

T
How you get an item

i st two
positions
3rd position

4th position

Who can install,

replace, or use
the item

Who can do
complete repair*
on the item

T
Who determines disposition
action on an unserviceable
item

*Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of
the "Repair" function in a use/user environment in order to restore serviceability to a failed item.
(1) Source Code. The source code tells you how to get an item needed for maintenance, repair, or
overhaul of an end item/equipment. Explanations of source codes follow:
Code
PA
PB
PC**
PD
PE
PF
PG
KD
KF
KB

C-2

Explanation
Stocked items; use the applicable NSN to request/requisition
items with these source codes. They are authorized to the
level indicated by the code entered in the 3rd position of the
SMR code.
"NOTE: Items coded PC are subject to deterioration.
Items with these codes are not to be requested/requisitioned
dividually. They are part of a kit which is authorized to the
maintenance level indicated in the 3d position of the SMR
code. The complete kit must be requisitioned and applied.

in-

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 1lW2-8-1-322
Code

MOMFMHML-

MD-

Explanation

(Made at Unit/
AVUM Level)
(Made at DS/
AVIM Level)
(Made at GS
Level)
(Made at Spe-

f'_
]

Items with these codes are not to be requested/requisitioned

individually. They must be made from bulk material which
is identified by the part number in the DESCRIPTION AND
USABLE ON CODE (UOC) column and listed in the Bulk
Material Group of the repair parts list in this RPSTL.
If the item is authorized to you by the 3d position code of the
SMR code, but the source code indicates it is made at a

Act (SRA))
(Made at Depot)
cialized Repair

higher level, order the item from the higher level of maintenance.

I
AO-

(Assembled by Unit/

AF-

(Assembled by
AVUM Level)
DS/AVIM
Level)
(Assembled by
GS Level)
(Assembled by
SRA)
(Assembled by
Depot)

AHALAD-

XA XB XC XD -

[
_

Items with these codes are not to be requested/requisitioned

be requisitioned or fabricated and assembled at the level of
individually. The
maintenance
indicated
parts that
by the
make
source
up the
code.
assembled
If the 3ditem
position
must
cede of the SMR code authorizes you to replace the item, but
the source code indicates the item is assembled at a higher
level, order the item from the higher level of maintenance.

Do not requisition an "XA"-coded item. Order its next higher assembly. (Also, refer to the NOTE below.)
If an "XB" item is not available from salvage, order it using the CAGEC and part number given.
Installation drawing, diagram, instruction sheet, field service drawing, that is identified by manufacturer's
part number.
Item is not stocked. Order an "XD'-coded item through normal supply channels using the CAGEC and
part number given, if no NSN is available.
NOTE
Cannibalization or controlled exchange, when authorized, may be used as a source of supply for
items with the above source codes, except for those source coded "XA' or those aircraft support
items restricted by requirements of AR 750-1.

C-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AlR FORCE T.0.11W2-8-1-322
C-3.

EXPLANATION

OF COLUMNS (SECTIONS II AND

III)(cont)

(2) Maintenance Code. Maintenance codes tell you the level(s) of maintenance authorized to USE and
REPAIR support items. The maintenance codes are entered in the third and fourth positions of the SMR code as
follows:
(a) The maintenance code entered in the third position tells you the lowest maintenance level
authorized to remove, replace, and use an item. The maintenance code entered in the third position will indicate
authorization to one of the following levels of maintenance:
Code

Application
/Explanation

-Crew or operator maintenance

done within unit or aviation unit maintenance.

-Unit or aviation unit level can remove, replace, and use the item.

-Direct support or aviation intermediate

the item.

-General support level can remove, replace, and use the item.

-Specialized

-Depot level can remove, replace, and use the item.

level can remove, replace, and use

repair activity can remove, replace, and use the item.

(b) The maintenance code entered in the fourth position tells whether or not the item is to be repaired and identifies the lowest maintenance level with the capability to do complete repair (i.e., perform all
authorized repair functions.) (NOTE: Some limited repair may be done on the item at a lower level of maintenance, if authorized by the Maintenance Allocation Chart (MAC) and SMR codes.) This position will contain one
of the following maintenance codes:
Code

C-4

Application/Explanation

-Unit or aviation unit is the lowest level that can do complete

repair of the item.

-Direct support or aviation intermediate

plete repair of the item.

-General support is the lowest level that can do complete

-Specialized
the item.

-Depot is the lowest level that can do complete repair of the item.

-Nonrepairable.

-No repair is authorized. (No parts or special tools are authorized for the
maintenance of a "B" coded item.) However, the item may be reconditioned
by adjusting, lubricating, etc., at the user level.

is the lowest level that can do com-

repair of the item.

repair activity is the lowest level that can do complete repair of

No repair is authorized.

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322
(3) Recoverability Code. Recoverabilitycodes are assignedto itemsto indicatethedispositionaction
on unserviceable items. The recoverability code is entered in the fifth position of the SMR code as follows:
Recoverability
Code

Application/Exr'anation

-Nonrepairable Rem. When unserviceable, condemn and dispose of the item

at the level of maintenance shown in 3d position of SMR code.

-Repairable item. When uneconomically repairable, condemn and dispose of

the item at unit or aviation unit level.

-Repairable item. When uneconomically repairable, condemn and dispose of

the item at direct support or aviation intermediate level.

-Repairable item. When uneconomically repairable, condemn and dispose of

the item at general support level.

-Repairable item. When beyond lower level repair capability, return to depot.
Condemnation and disposal of item not authorized below depot level.

-Repairable item. Condemnation

ized Repair Activity (SRA).

-Item requires special handling or condemnation procedures because of

specific reasons (e.g., precious metal content, high dollar value, critical
material, or hazardous material). Refer to appropriate manuals/directives for
specific instructions.

and disposal not authorized below Special-

CAGEC (Column (3)). The Contractor and Government Entity Code (CAGEC) is a 5-digit alphanumeric
c.
code which is used to identity the manufacturer, distributor, or Govemment agency, etc., that supplies the Rem.
PART NUMBER (Column (4)). Indicates the primary number used by the manufacturer (individual,
d.
company, firm, corporation, or Government activity), which controls the design and characteristics of the item by
means of its engineering drawings, specifications standards, and inspection requirements to identify an item or
range of items.
NOTE
When you use an NSN to requisition an item, the item you receive may have a different part
number from the part ordered.
DESCRIPTION AND USABLE ON CODE (UOC) (Column (5)). This column includes the following
e.
information:
(1) The Federal item name and, when required, a minimum description to identify the item.
(2) The physical security classification of the Rem is indicated by the parenthetical entry which is a
physical security classification abbreviation (e.g., Phy Sec CI (S) - Confidential, Phy Sec CI (S) - Secret, Phy Sec
Cl (T) - Top Secret).
(3) Items that are included in kits and sets are listed below the name of the kit or set.
(4) Spare/repair parts that make up an assembled item are listed immediately following the assembled
item line entry.

C-5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
C-3.

EXPLANATION

OF COLUMNS (SECTIONS II AND III) (cont)

(5) Part numbers for bulk materials are referenced in this column in the line item entry for the item to be
manufactured/fabricated.
(6) When the item is not used with all serial numbers of the same model, the effective serial numbers are
shown on the last line(s) of the description (before UOC).
(7) The usable on code, when applicable (see para C-5, Special Information).
(8) In the Special Tools List section, the Basis of Issue (BOI) appears as the last line(s) in the entry for
each special tool, special TMDE, and other special support equipment. When density of equipment supported
exceeds density spread indicated in the basis of issue, the total authorization is increased proportionately.
(9) The statement "END OF FIGURE" appears just below the last item description
given figure in both Section II and Section III.

in Column 5 for a

f.
QTY (Column (6)). The QTY (quantity per figure column) indicates the quantity of the item used in the
breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an
assembly. A "V" appearing in this column in lieu of a quantity indicates that the quantity is variable and the
quantity may vary from application to application.
C-4.
a.

EXPLANATION

OF COLUMNS

(SECTION

IV)

NATIONAL STOCK NUMBER (NSN) INDEX.

(1) STOCK NUMBER column. This column lists the NS N by National Item Identification Number (NIIN)
NSN
sequence. The NIIN consists of the last nine digits of the NSN (i.e., 5305-01-674-1467).
NIIN
When using this column to locate an item, ignore the first 4 digits of the NSN. However, the complete NSN
should be used when ordering items by stock number.
(2) FIG. column. This column lists the number of the figure where the item is identified/located.
figures are in numerical order in Section II and Section III.

The

(3) ITEM column. The item number identities the item associated with the figure listed in the adjacent
FIG. column. This item is also identified by the NSN listed on the same line.
b.
PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric
sequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each
group in order A thru Z, followed by the numbers 0 thru 9 and each following letter or digit in like order).
(1) CAGEC column. The Contractor and Government Entity Code (CAGEC) is a 5-digit alphanumeric
code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
(2) PART NUMBER column.
Indicates the primary number used by the manufacturer (individual, firm,
corporation, or Government activity), which controls the design and characteristics of the hem by means of its
engineering drawings, specifications standards, and inspection requirements to identify an item or range of items.
(3) STOCK NUMBER column. This column lists the NSN for the associated part number and manufacturer identified in the PART NUMBER and CAGEC columns to the left.

C-6

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(4) FIG. column. This column list the number of the figure where the item is identified/located in
Sections II and III.
(5) ITEM column. The item number is that number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
c. FIGURE AND ITEM NUMBER INDEX.
(1) FIG. column. This column lists the number of the figure where the item is identified/located in
Sections II and III.
(2) ITEM column. The item number is that number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
(3) STOCK NUMBER column. This column lists the NSN for the item.
(4) CAGEC column. The Contractor and Government Entity Code (CAGEC) is a 5-digit alphanumeric
code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
(5) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm,
corporation, or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications standards, and inspection requirements to identify an item or range of items.

C-5. SPECIAL INFORMATION

a. USABLE ON CODE. The usable on code appears in the lower left corner of the Description column
heading. Usable on codes are shown as UOC: in the Description column (justified left) on the first line of
applicable item description/nomenclature. Uncoded items are applicable to all models. Identification of the
usable on codes used in the RPSTL are:
Code
AM4
AM5
AM7
AM8
AM9
AN0
AR3
AY7
AY8
BB7
BB8
BC5

Used On
M66 Machine gun mount
M122 Machine gun tripod mount
M142 Machine gun mount
6650 .50 cal machine gun mount
M240E1 Flexible machine gun mount
M3 Tripod mount
M548 Machine gun mount
MK93 MOD 0 machine gun mount
MK93 MOD 1 machine gun mount
M6 Machine gun pedestal mount
M197 Machine gun mount
M122A1 Machine gun tripod mount

b. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk
Material Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the description
column of the item entry for the item to be manufactured/fabricated.
c. ASSEMBLY INSTRUCTIONS. Detailed assembly instructions for items source coded to be assembled
from component spare/repair parts are found in this manual. Items that make up the assembly are listed
immediately following the assembly item entry or reference is made to an applicable figure.

Change 5

C-7

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

C-6. HOW TO LOCATE REPAIR PARTS

a. When National Stock Number or Part Number is Not Known.
(1) First. Using the table of contents, determine the assembly group or subassembly group to which the
item belongs. This is necessary since figures are prepared for assembly groups and subassembly groups, and
listings are divided into the same groups.
(2) Second. Find the figure covering the assembly group or subassembly to which the item belongs.
(3) Third. Identify the item on the figure and use the Figure and Item Number Index to find the NSN.
b. When National Stock Number or Part Number is Known.
(1) First. Using the National Stock Number or Part Number Index, find the pertinent National Stock
Number or Part Number. The NSN index is in National Item Identification Number (NIIN) sequence (see para
C-4.a(1)). The part numbers in the Part Number index are listed in ascending alphanumeric sequence (see para
C-4.b). Both indexes cross-reference you to the illustration/figure and item number of the item you are looking for.
(2) Second. Turn to the figure and item number, verify that the item is the one you are looking for, then
locate the item number in the repair parts list for the figure.

C-7. ABBREVIATIONS
Not applicable.

C-8

Change 2

SECTION II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

M122A1

M122

Figure C-1. Mount, Tripod, Machine Gun, M122, 7790723,

M122A 1, 12976949(Assembled View)

(1)
ITEM
NO

(2)
SMR
CODE

(3)
CAGEC

(4)
PART
NUMBER

(5)

(6)

DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUPOO
FIG. C-1 MOUNT, TRIPOD, MACHINE GUN,
M122, 7790723; M122A1, 12976949
1
1

PAOFF
PAOFF

19205
19200

7790723
12976949

MOUNT, TRIPOD, MACHINE GUN, M122 ..............

MOUNT, TRIPOD, MACHINE GUN M122A1 ............
END OF FIGURE

C-1-1

Change 2

1
1

SECTION

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

00
0

-------------

Change 2

Figure C-2. Mount, Tripod, Machine Gun, M122, 7790723,

and M122A1, 12976949

L41

SECTION II

(1)
ITEM
NO

(2)
SMR
CODE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11
W2-8-1-322
(3)
CAGEC

(4)
PART
NUMBER

(5)

(6)

DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUPOO
FIG. C-2
MOUNT, TRIPOD, MACHINE GUN,
M 122, 7790723 AND M155A1,
12976949
1

XAOFF

19200

7790948

PAOFF

19205

7791119

PAOFF

19200

12976940

PAOOO

19205

11010408

TRIPOD LEG ASSY

SEE FIG. C-3 F/BREAKDOWN
UOC: AM5, BC5, BC6 ................................................
ELEVATING AND TRAVERSING MECHANISM
ASSY
SEE FIG. C-5 F/BREAKDOWN
UOC: AM5, BC5, BC6 ................................................
FLEXIBLE MOUNT
SEE FIG. C-23 F/BREAKDOWN
UOC: BC5, BC6 ..........................................................
PINTLE MOUNT
SEE FIG. C-6 F/BREAKDOWN
UOC: AM5 .................................................................

END OF FIGURE

C-2-1

Change 2

SECTION

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

3
I

20
14

19
17

151
15/
1 ? /

14 /12/

14
16
14

10
9

*No further disassembly

Change 2

authorized.

Figure C-3. Tripod, Leg Assembly,

7790948

0
7 I

SECTION II

(1)
ITEM
NO

(2)
SMR
CODE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(3)
CAGEC

(4)
PART
NUMBER

(5)

(6)

DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUP 02 AND 0201

FIG. C-3
TRIPOD, LEG ASSY, 7790948
1

PAFZZ

19204

5169880

PAFZZ

19204

5559338

PAFZZ

19204

5169881

PAFZZ

19204

5169882

PAFZZ

19205

6108201

XAFZZ

19204

5559331

96906

MS51968-8

19204

6108195

19204

5169879

PAFZZ
*PAOZZ
PAFZZ
*PAOZZ
PAFZZ
*PAOZZ
PAFZZ

19204

5141950

PAFZZ

19205

11010529

PAFZZ

19204

6108986

PAFZZ

96906

MS51031-48

PAFZZ

96906

MS51968-2

PAFZZ

19205

5139962

PAFZZ

19204

5559337

PAFZZ

19207

5140004

PAFZZ

19205

5139959

PAFZZ

19205

5139997

PAFZZ

19205

5559333

8
9

BOLT, MACHINE
UOC: AM5, BC5 ..........................................................
LEG, TRIPOD MOUNT
UOC: AM5, BC5 ..........................................................
BOLT, MACHINE
UOC: AM5, BC5 ..........................................................
BOLT, MACHINE
UOC: AM5, BC5 ..........................................................
BUSHING, SLEEVE
UOC: AM5, BC5 ..........................................................
HEAD
UOC: AM5, BC5 ..........................................................
NUT, PLAIN, HEXAGON
UOC: AM5, BC5 ..........................................................
LEG, TRIPOD MOUNT
UOC: AM5, BC5 ..........................................................
BOLT, MACHINE
UOC: AM5, BC5 ..........................................................
SCREW, MACHINE
UOC: AM5, BC5 ..........................................................
WASHER, LOCK
UOC: AM5, BC5 ..........................................................
LOCK ASSEMBLY, PINTLE
F/BREAKDOWN SEE FIG. C-7
UOC: AM5, BC5 ..........................................................
SETSCREW
UOC: AM5, BC5 ..........................................................
NUT, PLAIN, HEXAGON
UOC: AM5, BC5 ..........................................................
SPACER,SLEEVE
UOC: AM5, BC5 ..........................................................
LEG, TRIPOD MOUNT
UOC: AM5, BC5 ..........................................................
..PIN, STRAIGHT, HEADLESS
UOC: AM5, BC5 ..........................................................
..LATCH,SLEEVE
UOC: AM5, BC5 ..........................................................
-SPRING, HELICAL, COMPRESSION
UOC: AM5, BC5 ..........................................................
BAR ASSEMBLY, TRAVERSING
UOC: AM5, BC5 ..........................................................
END

MARINE

CORPS

ONLY

C-3-1

Change

FIGURE

2
1
2
2
1
1
3
1
1
2
2

1
1
4
2
1
1
1
1
1

SECTION

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
19
20

2
19

6
7
8
9

10
18 17

16
15
14
13
12

Change 2

Figure C-4. Elevating and Traversing Mechanism Assembly

(Traversing and Clamping Unit), 7791119

SECTION

(1)
ITEM
NO

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

(2)
SMR
CODE

(3)
CAGEC

(4)
PART
NUMBER

(5)
DESCRIPTION

AND USABLE ON CODES (UOC)

(6)
QTY

GROUP01
FIG. C-4 ELEVATING AND TRAVERSING
MECHANISM ASSEMBLY
(TRAVERSING AND CLAMPING),
7791119
1

PAFZZ

XAFZZ

PAFZZ

96906

MS51943-2

19205

5174192

19204
19205
19205
19205
19207
19205

11010037
5174175
5171495
11010547
5171491
5171492

PAFZZ

19207

6158375

PAFZZ

96906

MS51943-4

11
12
13
14

PAFZZ
PAOZZ
PAOZZ
PAOZZ

96906
19204
19205
19205

MS35756-2
5139989
11010413
7793002

PAOZZ

19205

7793003

PAOZZ

19205

5139988

PAFZZ

19205

5189757

PAFZZ

96906

MS1 6562-120

PAOZZ

96906

MS16624-1043

PAOZZ

19205

7792993

NUT, SELF-LOCKING, HEX

UOC: AM5, BC5 ..........................................................
WASHER, FLAT
UOC: AM5, BC5 ..........................................................
YOKE
UOC: AM5, BC5 ..........................................................
RING, TRAVERSING, MECHANISM
UOC: AM5, BC5 ..........................................................
PIN, STRAIGHT, HEADLESS
UOC: AM5, BC5 ..........................................................
SPRING, HELICAL, COMPRESSION
UOC: AM5, BC5 ..........................................................
NUT, UNION
UOC: AM5, BC5 ..........................................................
DIAL, SCALE
UOC: AM5, BC5 ..........................................................
KNOB
UOC: AM5, BC5 ..........................................................
NUT, SELF-LOCKING, HEX
UOC: AM5, BC5 ..........................................................
KEY, WOODRUFF
UOC: AM5, BC5 ..........................................................
SCREW, MACHINE
UOC: AM5, BC5 ..........................................................
WASHER, LOCK
UOC: AM5, BC5 ..........................................................
LEVER, TRAVERSING
UOC: AM5, BC5 ..........................................................
SPRING, HELICAL, TORSION
UOC: AM5, BC5 ..........................................................
SCREW, MACHINE
UOC: AM5, BC5 ..........................................................
STOP ASSEMBLY, ELEVATING
UOC: AM5, BC5 ..........................................................
PIN, SPRING
UOC: AM5, BC5 ..........................................................
RING, RETAINING
UOC: AM5, BC5 ..........................................................
PIN, GROOVED, HEADLESS
UOC: AM5, BC5 ..........................................................
END OF FIGURE

MARINE CORPS ONLY

C-4-1

Change 2

1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1

SECTION

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

2*
2*

10 11

*Issued as a set
Change 2

Figure C-5. Elevating and Traversing Mechanism Assembly

(Elevating Unit), 7791119

SECTION II

(1)
ITEM
NO

(2)
SMR
CODE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(3)
CAGEC

(4)
PART
NUMBER

(5)
DESCRIPTION AND USABLE ON CODES (UOC)
GROUP01
FIG. C-5

PAFZZ

19205

11010242

XAFZZ

19204

7793004

PAFZZ

192 04

5139982

PAFZZ

19204

5140612

PAFZZ

19204

6108211

PAFZZ

19204

5139994

PAFZZ

19205

5140485

PAFZZ

19204

8408768

PAFZZ

19204

5139995

PAFZZ

19205

11010523

PAFZZ

19205

11010522

10
11

END

Change

QTY

ELEVATING AND TRAVERSING

MECHANISM ASSEMBLY
(ELEVATING UNIT), 7791119

PLATE,SCALE
UOC: AM5, BC5 .........................................................
ELEVATING SCREW ASSEMBLY
(ISSUED AS A SET)
UOC: AM5, BC5 .........................................................
POINTER, DIAL
UOC: AM5, BC5 .........................................................
SETSCREW
UOC: AM5, BC5 .........................................................
KNOB
UOC: AM5, BC5 .........................................................
RING, CLICK, HANDWHEEL
UOC: AM5, BC5 .........................................................
RING, EXTERNALLY THREADED
UOC: AM5, BC5 .........................................................
STOP, GUN, AUTOMATIC
UOC: AM5, BC5 .........................................................
DISK, SOLID, PLAIN
UOC: AM5, BC5 .........................................................
SPRING, HELICAL, COMPRESSION
UOC: AM5, BC5 .........................................................
PIN, STRAIGHT, HEADLESS
UOC: AM5, BC5 .........................................................

C-5-1

(6)

OF FIGURE

1
1

1
1
1
1
1
1
1
1
1

SECTION

Change 2

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

Figure C-6. Pintle, Mount, 11010408

SECTION II

(1)
ITEM
NO

(2)
SMR
CODE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(3)
CAGEC

(4)
PART
NUMBER

(5)

(6)

DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUP03
FIG. C-6
1

PAOZZ

19205

11010409

PAOZZ

19204

11010410

XAOZZ

19204

11010412

PAOZZ

19205

11010411

PINTLE MOUNT, 11010408

LEVER, LOCK-RELEASE
UOC: AM5 ..................................................................
SPRING, HELICAL, TORSION
UOC: AM5 ..................................................................
PINTLE
UOC: AM5 ..................................................................
PIN, GROOVED, HEADLESS
UOC: AM5 ..................................................................
END OF FIGURE

C-6-1

Change 2

1
1
1
1

SECTION II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11
W2-8-1-322

5
4
3
CD

Figure

(1)
ITEM
NO

(2)
SMR
CODE

(3)
CAGEC

C-7

(4)
PART
NUMBER

Lock

Assembly,

Pintle,

6108986

(5)

(6)

DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUP 0202
FIG. C-7
LOCK ASSEMBLY, PINTLE, 6108986
1

PAFZZ

19205

11010448

PAFZZ

19205

5141080

XAFZZ

19205

5141081

XAFZZ

19205

6140648

PAFZZ

19205

5142877

XAFZZ

19204

5141121

RIVET, SOLID
UOC: AM5, BC5 ..........................................................
CAM, PINTLE LOCK RELEASE
UOC: AM5, BC5 ..........................................................
COLLAR, SHAFT
UOC: AM5, BC5 ..........................................................
HOUSING
UOC: AM5, BC5 ..........................................................
SPRING, HELICAL, COMPRESSION
UOC: AM5, BC5 ..........................................................
BODY
UOC: AM5, BC5 ..........................................................
END OF FIGURE

C-7-1

Change 2

1
1
1
1
1
1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11
W2-8-1-322
C-6.
a.

HOW TO LOCATE REPAIR PARTS

When National Stock Number or Part Number is Not Known.

(1) First. Using the table of contents, determine the assembly group or subassembly group to
which the items belongs. This is necessary since figures are prepared for assembly groups and
subassembly groups, and listings are divided into the same groups.
(2). Second.
belongs.
(3) Third.

Find the figure covering the assembly group or subassembly

group to which the item

Identify the item on the figure and use the Figure and Item Number Index to find the

NSN.
b.

When National Stock Number or Part Number is Known.

(1) First. Using the National Stock Number or Part Number Index, find the pertinent National Stock
Number or Part Number. The NSN index is in National Item Identification Number (NIIN) sequence (see
para C-4.a(l)). The part numbers in the Part Number index are listed in ascending alphanumeric
sequence (see para C-4.b). Both indexes cross-reference you to the illustration/figure and item number of
the item you are looking for.
(2) Second. Turn to the figure and item number, verify that the item is the one you are looking for,
then locate the item number in the repair parts list for the figure.
C-7.

ABBREVIATIONS

Not applicable.

C-8

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AlRFORCE T.O. 11W2-8-1-322

SectionII

FigureC-8. Mount, Tripod,MachineGun,M38403398(AssembledView).

SECTIONII
(2)
(3)
(1)
SMR
ITEM
NO
CODE CAGEC

TM9-1005-245-13&P
(6)
(5)
(4)
PART
DESCRIPTION AND USABLE ON CODES(UOC) QTY
NUMBER
GROUP 00
FIG.C-8 MOUNT,TRIPOD,MACHINE GUN,M3
8403398 (ASSEMBLED VIEW)

1 PAOFF 19204 8403398

1 PAODD 19204 8403398

MOUNT,TRIPOD,
MACHINE GUN, M3 ......
MOUNT,TRIPOD,
MACHINE GUN, M3
(MARINE CORPS ONLY) .................
END OF FIGURE

C-8-1

1
1

Section II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

'See figure C-10 for further breakdown.

Figure C-9.

SECTION II
(1)
(2)
(3)
ITEM
SMI{
NO
CODE CAGEC

Mount, Tripod, Machino Gun, M3 8403398.

TM9-!005-245-13&P
(4)
PART
NUMBER
DESCRIPTION

(5)
AND

(6)

USABLE

ON CODES(UOC)

GROUP 00
FIG.C-9 MOUNT, TRIPOD,MACHINE
M3 8403398
1 PAOFF

19200

5574621

2 PAOZZ

19204

5139973

3 PAOZZ

19200

5559332

4 PAOZZ

19204

5139964

5 PAOZZ

96906

MS24665-834

GUN,

ELEVATION MECHANISM
SEE FIGS. C-14
AND C-15 FOR BREAKDOWN ..............
U0C: AN0
BOLT,MACHINE ........................
U0C: AN0
PINTLE,MOUNT ........................
UOC :AN0
NUT,HEXAGON,SLOTTED
.................
U0C: AN 0
PIN,COTTER ..........................
U0C: AN 0
END OF

C-9-1

FIGURE

QTY

1
1
1
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

4
2

24
22

2
8
21

20
19

18
13

Figure C-10. Mount,

Head, Bearing Assembly

Tripod, Machine Gun, M3 8403398,8448211; and Bolt, Machine 6108395.

7M9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER

SECTION II
(1)
(2)
(3)
ITEM
SMR
NO
CODE CAGEC

(5)
AND USABLE

(6)
ON CODES(UOC)

QTY

GROUPS 00,01,AND
02
FIG.C-10
MOUNT,TRIPOD,MACHINE
GUN,M3
8403398;HEAD,
BEARING
ASSEMBLY 8448211;
AND BOLT,
MACHINE 6108395
1 PAFFF

19204

6507137

2 PAFZZ

19204

5170484

3 PAFZZ

88044

AN174-21A

4 PAFZZ

19205

5170486

5 XAFFF

19200

8448211

5 XADDD 19200

8448211

6 PAFZZ

19205

6108397

6 PADZZ

19205

6108397

7 XAFZZ

19204

5559419

8 PAFZZ

96906

MS51031-48

8 PADZZ

96906

MS51031-48

9 PAFFF

19204

6108395

10 PAFZZ

96906

MS16555-42

11 XAFZZ

19204

6108400

12 PAFFF

19204

5559423

13 PAFZZ

19204

6193782

14 PAFZZ

96906

MS39086-95

15 PAFZZ

96906

MS35691-826

16 PAFZZ

19204

6108396

17 PAFZZ

19205

5140237

18 PA-FZZ 192O4

5141950

19 PAFZZ

11010529

19205

LEG,TRIPOD
MJUNT
SEE FIG.
C-11 FOR
BREAKDOWN ...........................
UOC:ANO
BOLT,MACHINE
........................
UOC:ANO
........................
BOLT,MACHINE
UOC:ANO
BOLT,MACHINE
........................
UOC:ANO
HEAD,BEARING
ASSY ...................
UOC:ANO
HEAD,BEARING
ASSY
ANO (MARINE
CORPS ONLY) .........................
....................
..BEARING,SLEEVE
UOC:ANO
BEARING,SLEEVE
(MARINE CORPS ONLY).
UOC:ANO
..HEAD
TRIPOD .......................
UOC:ANO
..SETSCREW ..........................
UOC:ANO
SETSCREW
(MARINE CORPS ONLY) .......
UOC:ANO
......................
..BOLT,MACHINE
UOC:ANO
..PIN,STRAIGHT,HEADLE
...............
UOC:ANO
..SCREW .............................
UOC:ANO
LEG,TRIPOD
MOUNT SEE FIG. C-12 FOR
BREAKDOWN ...........................
UOC:ANO
NUT,FRONT
LEG CLAMP .................
UOC:ANO
PIN,SPRING
..........................
U0C:ANO
...................
NUT,PLAIN,HEXAGON
UOC:ANO
PLATE,RETAINING
SER .................
UOC:AN0
SCREW,MACHINE .......................
UOC:ANO
SCREW,MACHINE .......................
UOC: ANO
WASHER,LOCK .........................
UOC:AN0

C-10-1

1
2
2
2
1
1
1
1
1
1
1
1
1
1
1

1
1
4
2
8
2
2

SECTION II
(1)
(2)
(3)
ITEM
SMR
NO
CODE CAGEC

TM9-1005-245-13&P
(4)
PART
NUMBER
DESCRIPTION

PAFFF

19204

6108402

PAFZZ

96906

MS35691-826

PAFFF

19204

6507136

PAFZZ

19205

5140219

PAFZZ

19204

7149678

(5)
AND USABLE

(6)
ON CODES(UOC)

LATCH,PINTLE,MOUNT
SEE FIG.
C-16
FOR BREAKDOWN .......
...............
UOC:ANO
NUT,PLAIN,HEXAGON
...................
UOC:ANO
LEG,TRI
MNT REAR RT SEE FIG.
C-13
FOR BREAKDOWN .......................
UOC:ANO
SPACER,SLEEVE
.......................
UOC:ANO
BAR ASSEHBLY,TRAVER
.................
UOC:AN0
END OF FIGURE

C-10-2

QTY
1

2
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

4
3
5

6
7

Figure C- 11. Leg, Tripod, Mount 650 7137 (Left Rear).

SECTION II
(1)
(Z)
(3)
ITEM
SHE
NO
CODE CAGEC

TMg-1005-245-13&P
(4)
PART
NUMBER
DESCRIPTION

(5)
AND USABLE

(6)
ON CODES(UOC)

GROUP 03
FIG.C-ii LEG,TRIPOD MOUNT
(LEFT REAR)
1 PAFZZ

19200

11010426

19204

5140211

AFZZ

2PAOZZ

19204

3
PAFZZ

19205

11010530

3PAOZZ

19205

11010

4PAFZZ

19204

5140213

4PAOZZ

19204

5140213

5PAFZZ

19205

5140210

6PAF
7PA

5140211

530

19204

5140204

FZZ

19205

5140209

8
XAFZZ

19204

5559428

9PAFZZ

19205

11010421

9PAOZZ

19205

11010421

10PAFZZ

96906

MS39086-54

10PAOZZ

96906

MS39086-54

6507137

LEG SECTION,TRIPOD ..................

UOC :AN0
HANDLE,_AL
CONTR .................
UOC: AN0
_LE,MANUAL
CONTR
(MARINE CORPS
ONLY) ...............................
UOC: AN0
WASHER,LOCK .........................
U0C: AN0
WASHER,LOCK
(MARINE CORPS ONLY) ....
UOC :AM0
SETSCREW ............................
UOC: AN0
SETSCREW
(MARINE CORPS ONLY) .......
UOC :AN0
PIN,STRAIGHT,HEADLE
.................
UOC :AN0
LEVEK,_
CONTRO .................
UOC: AN0
SPRING,HELICAL,COMP .................
UOC: AN0
LEG .................................
U0C:AN0
NUT,PLAIN,HEXAGON ...................
UOC: AN0
NUT,PLAIN,HEXAGON
(MARINE CORPS
ONLY) ...............................
UOC:AN0
PIN,SPRING ..........................
UOC: AN0
PIN,SPRING
(MARINE CORPS ONLY) .....
UOC :AN0
END OF FIGURE

C-11-1

QTY

1
1
1

1
1
1
1
1
1
1
1
1
1

1
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TIVI 1005-13&P/1
AIRFORCE T.O. 11 W2-8-1-322

5
6
7

Figure C- 12. Leg, Tripad, Mount 5559423

(Front).

SECTION ii
(3)
(2)
(1)
ITEM
SMR
NO
CODE CAGEC

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER
GROUP 04
FIG.C-12

1 XAFZZ

19204

5559424

2 PAFZZ

19205

5140209

3 PAFZZ

19205

5140210

4 PAFZZ

19204

5140204

5 PAFZZ

19204

5140211

5 PAOZZ

19204

5140211

6 PAFZZ

19204

5140213

6 PAOZZ 19204

5140213

7 PAFZZ

19205

11010530

7 PAOZZ

19205

11010530

8 XAFZZ

19204

6108384

9 PAFZZ

19205

11010421

9 PAOZZ

19205

11010421

10 PAFZZ

96906

MS39086-54

PAOZZ 96906

MS39026-54

(6)

(5)
AND USABLE

LEG,TRIPOD
(FRONT)

ON CODES (UOC)

MOUNT 5559423

LEG .................................
UOC:ANO
.................
SPRING,HELICAL,COMP
UOC:ANO
.................
PIN,STRAIGHT,HEADLE
UOC:ANO
LEVER,MANUAL
CONTROL.................
UOC:ANO
HANDLE,MANUAL
CONTR .................
UOC:ANO
HANDLE,MANUAL
CONTR
(MARINE CORPS
ONLY) ...............................
UOC:ANO
SETSCREW ............................
UOC:ANO
SETSCREW
(MARINE CORPS ONLY) .......
UOC:ANO
.........................
WASHER,LOCK
UOC:ANO
WASHER,LOCK
(MARINE CORPS ONLY) ....
UOC:ANO
LEG .................................
UOC:ANO
...................
NUT,PLAIN,HEXAGON
UOC:ANO
NUT,PLAIN,HEXAGON
(MARINE CORPS
ONLY) ...............................
UOC:ANO
..........................
PIN,SPRING
UOC:ANO
PIN,SPRING
(MARINE CORPS ONLY) .....
UOC:ANO
END OF FIGURE

C- 12-1

QTY

1
1
1
1
1

1
1
1
1
1
1
1

1
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS Tm 1005-13&Pll
AIR FORCE T.O. 11W2-8-1-322

4
3

5
r

7
11
13

Figure C- 13

Leg, Tripod, Mount 650 7136 (Right Rear).

SECTION ii
(3)
(1)
(2)
ITEM
SMR
CODE CAGEC
NO

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER
GROUP 05
FIG.C-13

1 PAFZZ

19200

11010426

2 PAFZZ

19205

11010530

2 PAOZZ 19205

11010530

3 PAFZZ

19204

5140213

3 PAOZZ 19204

5140213

4 PAFZZ

19204

5140211

4 PAOZZ 19204

5140211

5 XAFZZ

19200

5559425

6 PAFZZ

19205

5140215

7 PAFZZ

19204

5140216

8 PA.FZZ 19204

5140217

9 PAFZZ

96906

MS39086-54

9 PAOZZ

96906

MS39086-54

10 PAFZZ

19205

11010421

10 PAOZZ 19205

11010421

11 PAFZZ

19205

5140209

12 PAFZZ

19204

5140204

13 PAFZZ

19205

5140210

(6)

(5)
AND USABLE

ON CODES(UOC)

LEG,TRIPOD
MOUNT 6507136
(RIGHT REAR)

..................
LEG SECTION,TRIPOD
UOC:ANO
WASHER,LOCK .........................
UOC:ANO
WASHER,LOCK
(MARINE CORPS ONLY) ....
UOC:ANO
SETSCREW ............................
U0C:AN0
SETSCREW
(MARINE CORPS ONLY) .......
UOC:ANO
HANDLE,MANUAL
CONTR .................
UOC:AN0
HANDLE,MANUAL
CONTR
(MARINE
CORPS
ONLY) ...............................
UOC:ANO
LEG REAR RT UPPER ...................
UOC:ANO
.................
SPRING,HELICAL,COMP
UOC:ANO
..................
LEVER,LOCK-RELF.ASE
UOC:ANO
.................
PIN,STRAIGHT,HEADLE
UOC:ANO
..........................
PIN,SPRING
UOC:ANO
PIN,SPRING
(MARINE CORPS ONLY) .....
U0C:AN0
...................
NUT,PLAIN,HEXAGON
UOC:ANO
NUT,PLAIN,HEXAGON
(MARINE
CORPS
ONLY) ...............................
UOC:ANO
.................
SPRING,HELICA.L,COMP
UOC:ANO
LEVER,MANUAL
CONTRO .................
UOC:ANO
.................
PIN,STRAIGHT,HFADLE
UOC:ANO
END OF FIGURE

C- 13-1

QTY

1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

1
1
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

3
4

5
6

9
10

12
19

18
17
16
Shown here for disassembly.
See figure C-1 5 for further breakdown.

FigureC-14.

Elevation Mechanism

15
14

(Traversing

and Clamping

Unit) 5574621.

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NTUMBER

SECTION ii
(3)
(1)
(2)
ITEM
SMR
NO
CODE CAGEC

GROUP 06
FIG.C-14

1 PAFZZ

19205

5141460

1 PAOZZ 19205

5141460

2 PAFZZ

19204

5174113

2 PAOZZ 19204

5174113

3 PAFZZ

96906

MS51943-2

4 PAFZZ

19205

5174192

5 XAFZZ

19204

6166497

6 PAFZZ

19200

5174123

7 PAFZZ

19205

5171495

8 PAFZZ

19205

11010547

9 PAFZZ

19207

5171491

10 PAFZZ

192O5

5171492

11 PAFZZ

19207

6158375

12 PAFZZ

96906

MS51943-4

13 PAFZZ

19205

11010407

14 PAFZZ

19204

5139989

14 PAOZZ 19204

5139989

15 PAFZZ

19205

11010413

15 PAOZZ 19205

11010413

16 PAFZZ

19200

5194313

16 PAOZZ 19200

5194313

17 PAFZZ

8412295

19205

(6)

(5)
AND USABLE

ON CODES(UOC)

ELEVATION MECHANISM
(TRAVERSING
AND CLAMPING
UNIT) 5571321

CHAIN ASSEKBLY,SING .................

UOC:AN`0
(MARINE
CORPS
CHAIN ASSEMBLY,SING
ONLY) ...............................
UOC.ANO
PIN,QUICK
RELEASE ...................
UOC:ANO
PIN,QUICK
RELEASE
(MARINE CORPS
ONLY) ...............................
UOC:AN0
.................
NUT,SELF-LOCKING.HE
UOC:ANO
WASHER,FLAT .........................
UOC:ANO
YOKE ................................
UOC:AN0
.................
RING,CLICK,TRAVERSI
UOC:ANO
.................
PIN,STRAIGHT,HEADLE
UOC:ANO
.................
SPRING,HELICAL,COMP
UOC:ANO
NUT,UNION ...........................
UOC:ANO
..........................
DIAL,SCALE
UOC:ANO
KNOB ................................
UOC:ANO
.................
NUT,SELF-LOCKING,HE
UOC-ANO
KEY,WOODRUFF ........................
UOC:ANO
SCREW,MACHINE .......................
UOC:ANO
SCREW,MACHINE
(MARINE CORPS ONLY)..
UOC:ANO
WASHER,LOCK .........................
UOC:ANO
WASHER,LOCK
(MARINE CORPS ONLY) ....
UOC:AMO
LEVER,REMOTE
CONTRO .................
UOC:ANO
LEVER,REMOTE
CONTRO
(MARINE
CORPS
ONLY) ...............................
UOC:ANO
.................
SPRING,HELICA.L,TORS
UOC:ANO

C-14-1

QTY

1
1

1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

SECTION
II
(1)
(2)
(3)
ITEM
SMR
NO
CODE CAGEC

TM9-1005-245-13&P
(4)
PART
NUMBER
DESCRIPTION

PAOZZ

19205

8412295

PAFZZ

19200

5140383

PAOZZ

19200

5140383

PAFZZ

19200

5189756

PAFZZ

96906

MS16562-120

(5)
AND USABLE

(6)
ON CODES(UOC)

SPRING,HELICAL,TORS
(MARINE CORPS
ONLY) ...............................
UOC:ANO
SCREW,SELF-LOCKING
..................
UOC:ANO
SCREW,SELF-LOCKING
(MARINE CORPS
ONLY) ...............................
UOC:ANO
SPRING,FLAT
.........................
UOC:ANO
PIN,SPRING
..........................
UOC:ANO
END OF FIGURE

C-14-2

QTY
1

1
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AlR FORCE T.O. 11W2-8-1-322

3
4

Furnished with identically

numbered item.
L

FigureC-15.
Elevation
Mechanism
(Lower
andUpper
Elevating
Unit)
5574621.

SECTION II
(2)
(3)
(1)
ITEM
SMR
CODE CAGEC
NO

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER
GROUP 06
FIG.C-15

1 PAFZZ

19204

5140669

2 PBFZZ

19204

5591828

3 PAFZZ

19204

5139982

4 PAFZZ19204 5140612
5 PAFZZ

19204

6108211

6 PAFZZ

19200

5140137

7 PAFZZ

19205

5140485

8 PAFZZ

19204

8408768

9 PAFZZ

19204

5139995

10 PAFZZ

19205

11010523

11 PAFZZ

19205

11010522

(6)

(5)
AND USABLE

ON CODES(UOC)

ELEVATION
MECHANISM
(LOWER AND UPPER ELEVATING
UNIT) 5574621

PLATE,DESIGNATION
...................1
UOC:ANO
SCREW ASSEMBLY ......................1
UOC:ANO
POINTER,DIAL
...................1
UOC-ANO
SETSCREW .......................1
UOC:ANO
KNOB ............................1
UOC:ANO
.................1
RING,CLICK,ELEVATIN
UOC:ANO
RING,EXTERNALLY
THR .................1
UOC:ANo
..................1
STOP,GUN,AUTOMATIC
UOC:ANO
....................1
DISK,SOLID,PLAIN
UOC:ANO
SPRING,HELICAL,COMP
.................1
UOC:ANO
PIN,STRAIGHT,HEADLE
.................1
UOC:ANO
END OF FIGURE

C-15-1

QTY

Section IIi

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

5
4
5
3
@'Z@Z@
2

Figure C- 16.

SECTION II
(2)
(3)
(1)
ITEM
SMR
NO
CODE CAGEC

Latch, Pintle Mount 6108402.

TM9-1005-245-13&P
(4)
PART
NUMBER
DESCRIPTION

(5)
AND USABLE ON CODES(UOC)

GROUP 07
FIG.C-16
LATCH,PINTLE,MOUNT
1 PAFZZ

19205

11010448

2 PAFZZ 19205

5141080

3 XAFZZ

19204

5141081

4 XAFZZ

19205

6153118

5 PAFZZ

19205

5140209

6 XAFZZ

19204

5140225

(6)

6108402

RIVET,SOLID .........................
UOC:AN0
CAM,PINTLE
LOCK REL .................
UOC:ANO
COLLAR,SHAFT ........................
UOC:ANO
HOUSING .............................
UOC:ANO
SPRING,HELICA.L,COMP
.................
UOC:AN0
LOCK ................................
UOC:ANO
END OF FIGURE

C-16-1

QTY

1
1
1
1
2
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2.8-1-322

C5
CD
CD
0

FigureC-17.

SECTION
II
(3)
(2)
(1)
ITEM,
SMR
NO
CODE CAGEC

Ping,

Mount,

Machine

Gun, M66 7012810(Assembled

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER

7012810
7012810

(6)

(5)
AND USABLE ON CODES(UOC)

GROUP 00
FIG.C-17
RING,MOUNT,MACHINE
M66 7012810
(ASSEMBLED VIEW)
1 PAFFF 19204
1 PAOFF 19204

View).

GUN,

RING,MOUNT,MACHINE
GUN,M66 ...
RING, MOUNT, MACHINE
GUN,M66
(MARINE CORPS ONLY) .................
END OF FIGURE

C-17-1

QTY

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

2
3
4

Figure C-18.

Ring, Mount, Machine

Gun, M66 7012810.

SECTION II
(1)
(3)
(2)
ITEM
SMR
CODE CAGEC
NO

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER

AND USABLE ON CODES(UOC)

GROUP 00
FIG.C-18
RING,MOUNT,MACHINE
M66 7012810
1 PAOZZ 96906

MS907Z7-86

2 PAOZZ 96906

MS24665-132

3 PAOZZ 19204

10945028

4 PAOZZ 96906

MS35810-2

5 XAOFF 19204

7012727

5 XAOFF 19204

7012727

6 PAOZZ 19204

11589551

7 PAOZZ 19207

10907432-4

8 PAOZZ 96906

MS51963-64

9 PAOZZ 96906

MS51922-29

10 PAOZZ 96906

MS27183-16

11 PAOZZ 19204

11631739

(6)

(5)

GUN,

SCREW,CAP,HEXAG0N
H .................
UOC:AM4,AR3
PIN,COTTER .....................
UOC:AM4,AR3
PAD, CUSHIONING ....................
UOC:AM4,AR3
.
HEADED .................
PIN.STRAIGHT
UOC,AM4,AR3
RING ASSEMBLY SEE FIGS. C-19 AND C20 FOR BREAKDOWN ....................
UOC:AK4,AEL3
RING ASSEMBLY SEE FIGS. C-19 AND C20 FOR BREAKDOWN
(MARINE CORPS ONLY) .................
UOC:AM4,AR3
TRIDGE .................
DEFLECTOR,CARTRIDGE...............1
UOC:AM4,AR3
WIRE, NONELECTRICAL ..................
UOC:AM4,AR3
SETSCREW ........2
UOC:AH4,AR3
.................
NUT SELF-LOCKING,HE
UOC:AM4,AR3
WASHER,FLAT ....................2
UOC:AM4,AR3
SUPPORT,DEFLECTOR ...................
UOC:AM4,AR3
END OF FIGURE

C-18-1

QTY

2
2

2
1
1

1
1
2
2
2
1

Section II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

2
4

7
@7117
6

16
8

15
9
14

See figure C-20 for further breakdown.

FigureC-19.

Ring

Assembly

7012727

and Ring

Assembly

7012725.

SECTION II
(I)
(2)
(3)
ITEM
SMR
NO
CODE CAGEC

TM9-!005-245-!3&P
(4)
PART
NUbfBER
DESCRIPTION

(5)
AND USABLE

GROUPS 01,0101,0101,AND
FIG.C-19 RING ASSEMBLY
RING ASSEMBLY
1 PAFFF

19204

7012725

1 PAOFF

19204

7012725

2 PAFZZ

19207

7012720

3 PA FZZ

19204

7012723

4 PAFZZ

19204

5 PAFZZ

96906

6 PAFZZ

96906 MS35338-43

7 PA FZZ

19204

7012722
MS35206-268

7012724

8 XAFZZ

19204

7070851

9 PAFZZ

19204

7012805-1

10 PAFZZ

19204

7012726

11 PAFZZ

96906

MS35333-38

12 PAFZZ

96906

MS35206-246

13 PAFZZ

19204

7012805-2

14 PAFZZ

19204

7012806

15 PAFZZ

19204

16 PAFZZ

96906 MS35333-39

17 PAFZZ

7012701

96906 MS35207-263

(6)
ON CODES(UOC)
010101
7012727
7012725

AND

RING ASSEMBLY .......................

UOC :AM4 ,AR3
RING ASSEMBLY
(MARINE CORPS ONLY)..
UOC :AM4 ,AR3
PIN,STRAIGHT,HEADED .................
UOC: AM4, AR3
SEGMENT,SEAL RING ...................
UOC :AM4 ,ARS
SEGMENT SEAL RING ...................
UOC :AM4 ,AR3
SCRE W,MACHINE .......................
UOC :AM4 ,ARS
WASHER,LOCK .........................
UOC :AM4 ,AR3
SEGMENT,SEAL RING ...................
UOC :AM4 ,AR3
RING,OUTER SEAL .....................
UOC :AM4 ,ARS
FELT,MECHANICA L,PRE .................
UOC: AM4, AR3
RING,SEAL RETAINER ..................
UOC :AM4 ,ARS
WASHER,LOCK ..... '...................
UOC :AM4 ,AR3
SCRE W,MACHINE .......................
UOC :AM4,AR3
FELT,MECHANICAL,PRE .................
UOC :AM4 ,AR3
FELT,MECHANICAL,PRE .................
UOC :AM4 ,AR3
RING,0UTER SEAL .....................
UOC :AM4 ,AR3
WASH ER,LOCK .........................
UOC: AM4, ARS
SCREW,MACHINE .......................
UOC: AM4, ARS
END OF FIGURE

C-19-1

QTY

1
1
2
1
1
1
1
1
1
1
1
22
22
1
1
1
24
24

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

kt@D@

14
11

C,
C3.

21
18

20
9

FigureC-20.

Ring Assembly

7012727

and Ring 7070704.

SECTION II
(3)
(2)
(1)
ITEM.
SMR,
CODE CAGEC
NO

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER

(6)
AND USABLE

GROUPS 01,0102,0101,AND
FIG.C-20
RING ASSEMBLY
RING 7070704
1 PAFFF

19204

7070704

2 PAFZZ

96906

MS51922-9

3 PAFZZ

19204

7012702

4 XAFZZ

19204

7012713

5 PAFZZ

96906

MS16997-84

6 PAOZZ

96906

MS87006-3

7 PAOZZ 81348

RRC271

8 PAOZZ

19204

7012747

9 PAOZZ

96906

MS24665-283

10 PAFZZ

19204

7012730

11 PAFZZ

96906

MS16997-84

11 PAOZZ

96906

MS16997-84

1Z PAFZZ

19204

7012804

12 PAOZZ

19204

7012804

13 PAFZZ

19204

7012731

13 PAOZZ

19204

7012731

14 PAFZZ

19207

7012733

14 PAOZZ 19207

7012733

15 PAFZZ

19204

7012732

15 PAOZZ 19204

7012732

16 PAOZZ

96906

MS24665-285

17 XDFZZ

19204

7012740

ON CODES(UOC)
010102
7012727

...............
RING ................
UOC:AM4,AR3
..........
_ NUTLOCKING,HE
..NUT,SELF
UOC:AM4,AR3
...............
..RING,REVOLVING,LOWE
UOC:AM4
..RING
UPPER REVOLV .................
UOC.-AM4,AR3
..SCREW,CAP,SOCKET
HE ...............

AND
1
.....

UOC:AM4,AR3
........................
HOOK,CHAINS
UOC:AM4,AR3
......................
CHAIN,WELDLESS
UOC:AM4,AR3
SOCKET ...................
CAP, PINTLE
UOC:AM4,AR3
PIN,COTTER ..........................
UOC:AM4,AR3
HANDLE,PINTLE
LOCK ..................
UOC:AM4,AR3
SCREW,CAP,SOCKET
HE .................
UOC:AM4,AR3
SCREW,CAP,SOCKET
HE (MARINE CORPS
ONLY) ...............................
UOC:AM4,AR3
.................
PIN,SHOULDER,HEADLE
UOC:AM4,AR3
HEADLE
(MARINE CORPS
PIN,SHOULDER,
ONLY) ...............................
UOC:AM4,AR3
HANDLE,MANUAL
CONTR .................
UOC:AM4,AR3
HANDLE,MANUAL
CONTR
(MARINE CORPS
ONLY) ...............................
UOC:AM4,AR3
.................
SPRING,HELICAL,COMP
UOC:AM4,AR3
SPRING,HELICAL,COMP
(MARINE CORPS
ONLY) ...............................
UOC:AM4,AR3
.........................
SPACER,RING
UOC:AM4,AR3
SPACER,RING
(MARINE CORPS ONLY) ....
UOC:AM4,AR3
..........................
PIN,COTTER
UOC:AM4,AR3
...................
SEGMENT,SEPARATOR
UOC:AM4,AR3

C-20-1

QTY

22
1
1
22
2
1
1
2
1
2
2

1
1

1
1
1
1
1
16

SECTION
Il
(1)
(2)
(3)
ITEM
SMR
NO
CODE CAGEC

TM9-1005-245-13&P
(4)
PART
NUM13ER
DESCRIPTION

PAFZZ

19207

8668937

PAFZZ

19204

7012762

PAFFF

19204

7012801

PAOFF

19204

7012801

21 PAOZZ 19204

7012728

(6)

(5)
AND USABLE

ON CODES(UOC)

DISK,SOLID,PLAIN
....................
UOC:AM4,AR3
CLAMP,BRAKE
LINING ..................
UOC:AM4,AR3
BRAKE,RING
SEE FIG.
C-21 FOR
BREAKDOWN ...........................
UOC:AM4,AP3
BRAKE,RING
SEE FIG.
C-21 FOR
BREAKDOWN
(MARINE CORPS ONLY) .................
UOC:AM4,AR3
BUSHING,SLEEVE
......................
UOC:AM4,AR3
END OF FIGURE

C-20-2

QTY
96
1
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

8
7

ag@

6
5

12
9

2
1

2
20

15
17
16

18
19

Figure C-21.

Brake, Ring 7012801.

SECTION II
(2)
(3)
(1)
ITEM
SMR,
NO
CODE CAGEC

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER

(6)
AND USABLE

ON CODES(UOC)

qTY

GROUPS 0103 AND 010103

FIG.C-21
BRAKE.RING
7012801
1 PAOZZ

19204

7012759

2 PAOZZ

96906

MS16997-60

3 PAFZZ

19204

7012800

4 PAFZZ

19204

7012756

5 PAFZZ

96906

MS51932-59

6 PAOZZ

96906

MS24665-283

7 PAFZZ

19207

7070734

8 PAFZZ

19204

7012765

9 PAFZZ

19204

7012758

10 PAFZZ

96906

MS27183-15

11 PAFZZ

96906

MS51922-17

12 PAFZZ

19207

7012761

13 PAFZZ

96906

MS51963-67

14 PAFZZ

19204

7012753

15 PAFZZ

19207

7012752

16 PAFZZ

96906

MS16556-628

17 PAFZZ

19204

7012757

18 PAFZZ

19204

7012748

19 PAFZZ

19207

7012749

20 PAFZZ

96906

MS35743-11

21 PAFZZ

96906

MS16997-102

22 PAFZZ

19204

7012760

LEVER,MANUAL
CONTRO .................
UOC:AM4,AR3
SCREW,CAP,SOCKET HE .................
UOC:AM4,AR3
........................
COLLAR,SHA.FT
UOC:AM4,AR3
CAM,BRAKE
SHOE ......................
UOC:AM4,AR3
.................
PIN,STRAIGHT,HEADLE
UOC:AM4,AR3
PIN,COTTER ..........................
UOC:AM4,AR3
WASHER,FLAT .........................
UOC.-AM4,AR3
BRAKE SHOE SET ......................
UOC:AM4,AR3
BRACKET,CAM
BRAKE ...................
UOC:AM4,AR3
.........................
WASHER,FLAT
UOC:AM4,AR3
.................
NUT,SELF-LOCKING,HE
UOC:AM4,AR3
.....................
NUT,PLAIN,ROUND
UOC:AM4,AR3
SETSCREW ............................
UOC:AM4,AR3
BODY,DETENT
BRAKE R .................
UOC:AM4,AR3
.................
SPRING,HELICAL,COMP
UOC:AM4,AR3
.................
PIN,STRAIGHT,HEADLE
UOC:AM4,AR3
WORM,SHAFT ASSEMBLY .................
UOC:AM4,AR3
.................
SPRING,HELICAL,COMP
UOC:AM4,AR3
.......................
WASHER,CONVEX
UOC:AM4,AR3
.........................
RIVET,SOLID
UOC-AM4,AR3
SCREW,CAP,SOCKET
HE .................
UOC:AM4,AR3
BRACKET,BRAKE
SHOE ..................
UOC:AM4,AR3
END OF FIGURE

C-21-1

1
1
1
1
1
2
1
1
1
2
2
1
1
1
1
1
1
1
1
1
2
1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

SECTION II

0
0

M240E1
0 cc>

M122A1

Figure C-22. M240E1 Flexible Mount Assembly,

12597090,
Flexible Mount Assembly,
12976940 (Assembled
View)

(1)
ITEM
NO

(2)
SMR
CODE

(3)
CAGEC

(4)
PART
NUMBER

(5)
DESCRIPTION

AND USABLE ON CODES (UOC)

(6)
QTY

GROUP OO
FIG. C-22 M240E1 FLEXIBLE MACHINE GUN
MOUNT (ASSEMBLED VIEW),
12597090; FLEXIBLE MOUNT ASSY,
12976940
1

PAOFF

19200

12597090

PAOFF

19200

12976940

M240E1 FLEXIBLE MACHINE GUN MOUNT

UOC: AM9 ...................................................................
FLEXIBLE MOUNT ASSEMBLY
UOC: BC5, BC6 ..........................................................
END OF FIGURE

C-22-1

Change 2

1
1

SECTION

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
3
2

..........
10
M122A1

...........
3
... .........

............. ....
4

..................

........................
5

8
................... ...... o
7

................. ............. .

.............
6

3
6
4
5
4
4
9
0
8

- --- -------

4
12
0

Change 2

Figure C-23. M240E1 Flexible Mount Assembly,

Flexible Mount Assembly, 12976940

12597090,

SECTION II

(1)
ITEM
NO

(2)
SMR
CODE

(3)
CAGEC

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(4)
(5)
PART
NUMBER
DESCRIPTION AND USABLE ON CODES (UOC)

(6)
QTY

GROUP OO
FIG. C-23 M240E1 FLEXIBLE MACHINE GUN
MOUNT (ASSEMBLED VIEW),
12597090; FLEXIBLE MOUNT ASSY,
12976940
1

PAFFF

19200

12597091

PAFZZ

96906

MS24673-4

MOOZZ

96906

MS20995C32

PAOZZ

96906

MS3215-4037

XAFZZ

19200

12597102

XAOZZ

19200

12976941

PAOFF

96906

MS18153-58

PAOZZ

19200

12597105

PAFZZ

19200

12597103

PAFZZ

19200

12976945

PAOZZ

19200

12597104

PAOZZ

19200

12976944

PAOZZ

19200

12976943

PAOZZ

19200

12976942

CRADLE ASSEMBLY, UPPER

SEE FIG. C-24 F/BREAKDOWN
UOC: AM9, BC5, BC6 .................................................
SCREW, CAP, SOCKET
UOC: AM9, BC5, BC6 .................................................
WIRE, NONELECTRICAL
MAKE FROM NSN 9505-00-293-4208
UOC: AM9, BC5, BC6 .................................................
RING, RETAINING
UOC: AM9, BC5, BC6 .................................................
SUPPORT, CRADLE, LOWER
UOC: AM9 ...................................................................
SUPPORT, CRADLE, LOWER
UOC: BC5, BC6 ..........................................................
SCREW, CAP, HEXAGON
UOC: AM9 ...................................................................
HOLDER ASSEMBLY
UOC: AM9 ...................................................................
PINTLE, MOUNT
UOC: AM9 ...................................................................
PINTLE, MOUNT
UOC: BC5, BC6 ..........................................................
PIN, GROOVED, HEADLESS
UOC: AM9, BC5, BC6 .................................................
PLATE, DEFLECTOR
UOC: BC5, BC6 ..........................................................
PIN, RETAINING, REAR
UOC: BC5, BC6 ..........................................................
BRACKET, T&E CRADLE
UOC: BC5, BC6 ..........................................................
END

C-23-1

Change

OF FIGURE

1
4

V
4
1
1
4
1
1
1
1
1
1
1

SECTION

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

2
3
4

5
6

10
3
4

5 9
5

12
8

Change 2

Figure C-24. Cradle Assembly,

Upper, 12597091

SECTION II

(1)
ITEM
NO

(2)
SMR
CODE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCET.O. 11W2-8-1-322
(3)
CAGEC

(4)
PART
NUMBER

DESCRIPTION AND USABLE ON CODES (UOC)

GROUP 01
FIG. C-24 CRADLE ASSEMBLY,
12597091

PAFZZ

96906

MS39086-44

XAFZZ

19200

12597092

PAFZZ

19200

12597095

PAFZZ

19200

12597096

PAFZZ

19200

12597097

PAFZZ

19200

12597098

7
8
9
10
11
12
13

XAFZZ
PAFZZ
PAOZZ
PAFZZ
PAOZZ
PAOZZ
PAOZZ

19200

12597093

19200

12597094

96906
19200

MS35190-271
12597099

19200

11826283

96906

MS39086-93

19200

12597100

blank

Change

FIGURE

QTY

UPPER,

PIN, SPRING
UOC: AM9, BC5, BC6 .................................................
SUPPORT, CRADLE
UOC: AM9, BC5, BC6 .................................................
SPRING, HELICAL, COMPRESSION
UOC: AM9, BC5, BC6 .................................................
SHIELD, SPRING
UOC: AM9, BC5, BC6 .................................................
STOP, ELASTIC
UOC: AM9, BC5, BC6 .................................................
BRACKET, EYE, NONROTATING
UOC: AM9, BC5, BC6 .................................................
SUPPORT, CRADLE, REAR
UOC: AM9, BC5, BC6 .................................................
TUBE, METALLIC
UOC: AM9, BC5, BC6 .................................................
SCREW, MACHINE
UOC: AM9 ...................................................................
PIN, SPRING
UOC: AM9, BC5, BC6 .................................................
RING, RETAINING
UOC: AM9, BC5, BC6 .................................................
PIN, SPRING
UOC: AM9, BC5, BC6 .................................................
DEFLECTOR
UOC: AM9 ...................................................................
END

C-24-1/C-24-2

(6)

(5)

4
1
2
2
4
2
1
2
2
1
1
1
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Figure C-25.

SECTION II
(2)
(3)
(1)
ITEM
SMR
NO
CODE CAGEC

Mount, Machine Gun, M142 10900945 (Assembled

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER

View).

(5)

(6)

AND USABLE ON CODES(UOC)

QTY

GROUP 00
FIG.C-25
MOUNT,MACHINE GUN,M142
10900945
(ASSEMBLED VIEW)
1 PAOFF 19207

10900945

MOUNT,MACHINE

GUN,

M142 ............

END OF FIGURE

C-25-1

Section II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

4
Oil

5
17
16

is
a

18
14

13
7
12

10
9

FigureC-26.

Mount, Machine Gun, M142 10900945 and Platform Assembly

10900947.

SECTION II
(2)
(3)
(1)
ITEM
SMR
NO
CODE CAGEC

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER

(5)
AND USA.BLE ON CODES (UOC)

(6)
QTY

GROUPS 00 AND 01
FIG.C-26
MOUNT,MACHINE
GUN,M142
10900945
AND PLATFORM
ASSEMBLY 10900947
1 PAFZZ 19204

10900948

2 PAFZZ 19204

10900712

3 PAFZZ

MS51096-355

96906

4 MOOZZ 96906

MS20995C32

5 PAFZZ

96906

MS51095-364

6 PAFZZ

19207

10900962

7 XDFZZ

19204

10900949

7 XAFZZ

19204

10900949

8 PAOZZ 19204

5236999

9 PAOZZ 19207

10900963

10 PAFZZ

96906

MS35206-315

11 PAFZZ

96906

MS35691-17

12 PAFZZ

96906

MS35692-37

13 PAOZZ 96906

MS24665-291

14 PAFZZ

96906

MS27183-18

15 AFFFF

19204

10900947

15 AOOOO 19204

10900947

16 PAFZZ 19204

7792982

16 PAOZZ 19204

7792982

17 PAFZZ

19205

7792978

17 PAOZZ 19205

7792978

18 PAFZZ

19204

10900946

18 PAOZZ 19204

10900946

CRADLE,MACHINE
GUN ..................
UOC:AM7
HOLDER ASSEMBLY,GUN .................
UOC.-AM7
SCREW,CAP,HEXAGON
H .................
UOC:AM7
WIRE, NONELECTRICAL
MAKE FROM
NSN9505-00-293-4208
.................
UOC:AM7
SCREW,CAP,HFXAGON
H .................
UOC:AM7
.......................
BOLT,SHOULDER
UOC:AM7
PINTLE,MOUNTING
.....................
UOC:AM7
PINTLE,MOUNTING
(MARINE CORPS ONLY)
UOC:AM7
.................
CHAIN ASSEMBLY,SING
UOC:AM7
PIN,QUICK
RELEASE ...................
UOC:AM7
.......................
SCREW,MACHINE
UOC:AM7
NUT,PLAIN,HEXAGON
...................
UOC:AM7
NUT,PLAIN,SLOTTED,H
.................
UOC:AM7
PIN,COTTER ..........................
UOC:AM7
............
WASHER,FLAT ............
UOC:AM7
PLATFORM ASSY .......................
UOC:AM7
PLATFORM ASSY
(MARINE CORPS ONLY) .
UCC:AM7
..STRIKE,CATCH
......................
UOC:AM7
..STRIKE,CATCH
(MARINE CORPS ONLY).
UOC:AM7
..SPRING,HELICAL,TORS
...............
UOC:AM7
..SPRING,HELICAL,TORS
(MARINE
CORPS ONLY) .........................
UOC:AM7
-PLATFORM
ASSEMBLY .................
UOC:AM7
(MARINE CORPS
-PLATFORM
ASSEMBLY

C-26-1

1
1
4
V

3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

1
1

SECTION II
(1)
(2)
(3)
ITER
SMR.
NO
CODE CAGEC

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER

19 PAFZZ

19205

7792977

19 PAOZZ

19205

7792977

(5)
AND USABLE

(6)
ON CODES(UOC)

ONLY) ...............................
UOC:AM.7
. . PIN, GROOVED, HEADLES ...............
UOC:AM7
..PIN,GROOVED,HEADLES
(MARINE
CORPS ONLY) .........................
UOC:AM7
END OF FIGURE

C-26-2

QTY

1
1

SectIon

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Figure C-27.

SECTION II
(3)
(2)
(1)
SMR
ITEM
CODE CAGEC
NO

Mount, Machine Gun, Cal.50,

6650 7046650 (Assembled

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER

View).

(5)
AND USABLE ON CODES(UOC)

(6)
QTY

GROUP 00
FIG.C-27
MOUNT,MACHINE GUN,CAL .50,
6650 7046650 (ASSEMBLED
VIEW)
1 PAOFF 19204

7046650

1 PAOOO 19204

7046650

MOUNT,MACHINE GUN, CAL .50,

6650,
SEE FIG C-30 FOR BREAKDOWN..........
MOUNT,MACHINE GUN, CAL .50, 6650,
SEE FIG C-30 FOR BREAKDOWN
(MARINE CORPS ONLY) .................
END OF FIGURE

C-27-1

1
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. l11W2-8-1-322

4
3
2

24
7

20
11
8

10
12

10
13

16
r&

-6

%@@
15

18
16
17

Figure

C-28.

Mount,

Machine

Gun, Cal.50,

6650 7046650,

SECTION II
(3)
(2)
(1)
ITEM
SMR
NO
CODE CAGEC

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER

(5)
AND USABLE

GROUP 00
FIG.C-28
MOUNT,MACHINE
6650 7046650
1 PAFZZ

19204

7046653

1 PAOZZ

19204

7046653

2 PAFZZ

96906

MS35333-42

2 PAOZZ

96906

MS35333-42

3 PAFZZ

96906

MS90727-57

3 PAOZZ

96906

MS90727-57

4 PAFZZ

19204

6590078

4 PAOZZ

19204

6590078

5 PAFZZ

19204

5328284

6 PAFZZ

19204

5384055

7 PAFZZ

19204

7046652

8 PAFZZ

19204

5384057

9 PAFZZ

96906

MS20392-3C41

9 PAOZZ

96906

MS20392-3C41

10 PAFZZ

96906

MS27183-10

10 PAOZZ

96906

MS27183-10

11 PAFZZ

19207

5384062

PAOZZ

19207

5384062

12 PAFZZ

96906

MS24665-132

12 PAOZZ

96906

MS24665-132

13 PAFZZ

19204

5384060

13 PAOZZ 19204

5384060

(6)
ON CODES(UOC)

GUN,CAL

.50,

BRACKET, AMMUNTION ..................

UOC:AH8
BRACKET,AMMUNITION
(MARINE
CORPS
ONLY) ...............................
UOC:AM8
WASHER,LOCK .........................
UOC:AH8
WASHER,LOCK
(MARINE CORPS ONLY) ....
UOC:AM8
SCREW,CAP,HEXAGON
H .................
UOC:AM8
SCREW, CAP, HEXAGON H
(MARINE
CORPS
ONLY) ...............................
UOC:AM8
TRY ASSY AMMO BOX ...................
UOC:AM8
TRY ASSY AMMO BOX
(MARINE CORPS
ONLY) ...............................
UOC:AM8
VICK ................................
UOC:AM8
.................
PIN,STRAICHT,HFADLE
UOC:AM8
CRADLE,MACHINE
GUN ..................
UOC:AM8
PIN,TAPERED,THREADE
.................
UOC:AM8
PIN,STRAIGHT,HEADED
.................
UOC:AM8
PIN, STRAIGHT, HEADED
(MARINE CORPS
ONLY) ...............................
UOC:AM8
WASHER,FLAT .........................
UOC:AM8
WASHER,FLAT
(MARINE CORPS ONLY) ....
UOC:AM8
SPRING,HELICAL,TORS
.................
UOC:AM8
(MARINE
CORPS
SPRING,HELICAL,TORS
ONLY) ...............................
UOC:AM8
PIN,COTTER ..........................
UOC:AM8
PIN,COTTER
(MARINE CORPS ONLY) .....
UOC:AM8
CLEVIS,ROD
END ......................
UOC:AM8
CLEVIS,ROD END (MARINE CORPS ONLY).
C-28-1

QTY

1
1

4
4
4
4

1
1

2
1
1
2
1
1

2
2
1
1

1
1
1
1

SECTION II
(3)
(2)
(1)
1 T L"I
SMR
NO
CODE CAGEC

TM9-1005-245-13&P
(4)
PART
NUMBER
DESCRIPTION

PAFZZ

19204

5384053

PAOZZ

19204

5384053

15 XAFZZ

19204

7042930

PAFZZ

96906

MS35338-45

16
17

PAOZZ
PAFZZ

96906
96906

MS35338-45
MS51968-5

PAOZZ

96906

MS57968-5

PAOZZ

19207

7070292

PAOZZ

19205

7042932

PAOZZ

96906

MS35338-046

PAOZZ

96906

MS90728-62

PAOZZ

19207

7070291

PAFZZ

19204

6297412

PAFZZ

96906

MS35333-46

PAFZZ

19204

5384059

PAFZZ

19204

5384056

PAFZZ

19207

6297411

PAFZZ

19204

5384064

(6)

(5)
AND USABLE

ON CODES(UOC)

UOC:AM8
BAR,MACHINE
GUN CRA .................
UOC:AM8
BAR,MACHINE
GUN CRA
(MARINE CORPS
ONLY) ....
..........................
UOC:AM8
PINTLE,MOUNT
...................1
UOC:AMS
WASHER,LOCK .........................
UOC:AM8
WASHER,LOCK
AMB (MARINE CORPS ONLY)
NUT,PLAIN,HEXAGON
...................
UOC:AM8
NUT,PLAIN,HEXAGON
AMB (MARINE
CORPS ONLY) .........................
PIN,QUICK
RELEASE ...................
UOC:AM8
PIN,QUICK
RELEASE ...................
UOC:AM8
WASHER,LOCK ....................1
UOC:AM8
SCREW,CAP,HEXAGON
H .................
UOC:AM8
PIN,QUICK
RELEASE ..............1
UOC:AMS
CASE,MACHINE
GUN EQ ............1
UOC:AM81
WASHER,LOCK ....................1
UOC:AM8
STUD,EQUILIBRATOR
S .................
UOC:AM8
PIN,GROOVED,HF-AXLES
.................
UOC:AM8
.................
SPRING,SPIRAL,TORSI
UOC:AMB
WASHER,FLAT
.........................
UOC:AMS
END OF FIGURE

C-28-2

QTY

1
1

3
3
3
3
1
1

1
1
1
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Figure C-29.

SECTION II
(2)
(3)
(1)
ITEM
SMR
NO
CODE CAGEC

Machine Gun Mount, M548 11631740-2 (Assembled View).

TM9-1005-245-13&P
(6)
(5)
(4)
PART
DESCRIPTION AND USABLE ON CODES(UOC) QTY
NUMBER
GROUP 00
FIG.C-29 MACHINE GUN MOUNT,M548
11631740-2
(ASSEMBLED VIEW)

1 PAOFF 19204 11631740-2

MACHINE GUN MOUNT,

M548 ............

END OF FIGURE

C-29-1

Section

ARMY TMI 9-1005-245-13&P

MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
5

3
t

2
0

3
4
2

6
CXC'

01
7

10
3

8
2
6-4

12
8

CPO

6
10

6
9
10
Eight screws provided to secure lifting eyes for storage.
Eight existing hull screws re-used to secure front supports to hull.
See figures C-1 7 thru C-21, C-27, and C-28 for further breakdown.
Figure C-30.

Machine Gun Mount, M548 11631740-2 (Legs and Attaching Hardware).

Section

ITEM
NO

(2)
SMR
CODE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322
(3)
CAGEC

(4)
PART
NUMBER

(5)
DESCRIPTION

AND USABLE ON CODES

(UOC)

(6)
QTY

GROUP OO
FIG.C-30
MACHINE GUN MOUNT, M548
11631740-2 (LEGS AND
ATTACHING HARDWARE)
1

PAOZZ

96906

MS90725-186

PAFZZ

96906

MS27183-18

PAFZZ

96906

B1821BH050F200N

PAFZZ

96906

MS21044-N8

PAFZZ

19207

10949553-2

PAOZZ

96906

MS27183-23

PAFZZ

19204

11661033

PA077

96906

B1821BHO75F25ON

PAOZZ

96906

MS51922-61

PAOZZ

96906

B1 82BHO75F20ON

PAFZZ

19204

11588700

PAFZZ

19207

10949553-1

PAOZZ

19204

8433770-1

SCREW, CAP, HEXAGON H

UOC:AR3 ...........................................................
WASHER, FLAT
UOC:AR3 ............................................................
SCREW, CAP, HEXAGON H
UOC:AR3 ...........................................................
NUT, SELF-LOCKING,
HE
UOC:AR3 ...........................................................
LEG, GUN MOUNT
UOC:AR3 ...........................................................
WASHER, FLAT
UOC:AR3 ...........................................................
LEG, GUN MOUNT
UOC: AR3 ...........................................................
SCREW, CAP, HEXAGON H
UOC:AR3 ...........................................................
NUT, SELF-LOCKING,
HE
UOC:AR3 ...........................................................
SCREW, CAP, HEXAGON H
UOC:AR3 ...........................................................
LEG, GUN MOUNT
UOC:AR3 ...........................................................
LEG, GUN MOUNT
UOC: AR3 ........................................................
STRAP, WEBBING
UOC: AR3 ........................................................
END OF FIGURE

C-30-1

8
12
12
12
1
14
1
2
2
2
1
1
4

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

4
7

Change 4

Figure C-31. Mount, Machine Gun, MK93 MOD 1 6650717 and Mount, Machine
MK93 MOD 0 6650450 (Assembled Views)

Gun,

Section II

(1)
ITEM
NO

(2)
SMR
CODE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(3)
CAGEC

(4)
PART
NUMBER

(6)

(5)
DESCRIPTION

AND USABLE ON CODES

(UOC)

QTY

GROUP 00, 00
FIG.C-31 MOUNT, MACHINE GUN, MK 93
MOD 1, 6650717, AND MOUNT,
MACHINE GUN, MK93 MOD 0
6650450 (ASSEMBLED VIEWS)
1

PAOFF

53711

6650717

PAOOO

53711

6650724

PAOFF

53711

6650450

PAOOO

19200

12929150

PAOOO

53711

6650723

PAOFF

19200

12012061

PAOFF

53711

5830128

PAOFF

53711

6650450

MOUNT, MG MK 93 MOD 1
UOC:AY8 ...........................................................
HOLDER ASSY, AMMO
(SEE FIG. C-34 FOR BREAKDOWN)
UOC: AY8 ..........................................................
..MOUNT, MG MK93 MOD 0
(SEE FIG. C-32 FOR BREAKDOWN)
UOC: AY8 ...........................................................
BRACKET,
MOUNTING
(SEE FIG. C-35 FOR BREAKDOWN)
UOC: AY8 ...........................................................
..CATCH BAG ASSY
(SEE FIG. C-36 FOR BREAKDOWN)
UOC: AY8 ...........................................................
..ADAPTER, UNIVERSAL PINTLE
(SEE FIG. C-37 FOR BREAKDOWN)
UOC: AY8 ...........................................................
ELEVATION
MECHANISM
(SEE FIG. C-14 AND C-14 FOR BREAKDOWN)
UOC:AY8 ...........................................................
MOUNT, MG MK93 MOD 0
(SEE FIG. C-32 FOR BREAKDOWN)
UOC: AY7 ...........................................................
END

C-31-1

OF FIGURE

Change

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

2
1

10
e-@-

4@@@@

8
9

Change 4

Figure C-32. Mount, Machine Gun, MK93 MOD 0 6650450 and

Yoke Assembly 6650725

SectionII

(1)
ITEM
NO

(2)
SIVIR
CODE

ARMY TM 9-1006-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. llW2-8-1-322
(3)
CAGEC

(4)
PART
NUMBER

(5)
DESCRIPTION

AND USABLE ON CODES

(UOC)

(6)
QTY

GROUP 00, 01, 0102, 02

FIG. C-32 MOUNT, MACHINE GUN, MK93
MOD 0 6650450 AND YOKE ASSY
6650725
1

AFFFF

53711

6650434

PAFZZ

53711

5830054

AFFFF

53711

6650725

PAFZZ

96906

MS21083C16

PAFZZ

88044

AN960XC1616

PBFZZ

53711

6650446

PAFZZ

53711

6650407

PAFZZ

53711

6650406

PAOZZ

53711

6650695

PAFZZ

96906

MS21083C10

CRADLE & CARRIAGE ASSY

(SEE FIG. C-33 FOR BREAKDOWN)
UOC: AYT AY8 ..................................................
BOLT, MACHINE
UOC: AYT AY8 ..................................................
YOKE ASSY
UOC: AYT AY8 ..................................................
..NUT, SELF-LOCKING
UOC: AYT AY8 ..................................................
..WASHER, FLAT
UOC: AYT AY8 ..................................................
..YOKE
UOC: AYT AY8., ................................................
..WASHER, FLAT
UOC: AYT AY8 ..................................................
..PINTLE, MOUNT
UOC: AYT AY8 ..................................................
..PIN, QUICK-RELEASE
UOC: AYT AY8 ..................................................
NUT, SELF-LOCKING
UOC: AYT AY8 ..................................................
END OF FIGURE

C-32-1

1
2
1
1
1
1
1
1
1
2

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
1*
1*

6
23*
22*
4*
6*
21*
20*
8

QQ
19

10
12

17
16

9
14*
15*

Change 4

Figure C-33. Carriage Assembly

Stop Assembly, Depression,

6650434 and
6650651

Section II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

(1)
ITEM
NO

(2)
SMR
CODE

(3)

(4)
PART
NUMBER

CAGEC

PAFZZ

96906

MS51957-61B

PAFZZ

53711

6650443

PAFZZ

53711

6650442

PAFZZ

53711

6650448

PBFZZ

53711

6650437

PBFZZ

53711

6650436

PAFZZ

19200

9363644

PAFZZ

96906

MS35307-303

PAFZZ

88044

NAS1149C0863B

PAFZZ

96906

MS35307-409

PBFZZ

53711

6650445

PAOZZ

53711

6650673

PAFFF

53711

6650651

PAFZZ

53711

6650654

PAFZZ

53711

6650696

PAFZZ

53711

6650697

PAOZZ

53711

6650433-2

PAOZZ

53711

6650433-1

PAFZZ

53711

6650439-1

PBFZZ

53711

6650438

(6)

(5)
DESCRIPTION

AND USABLE ON CODES

(UOC)
GROUP 01, 0101, 0101, 010101
FIG. C-33 CARRIAGE ASSEMBLY 6650434
AND STOP ASSEMBLY,
DEPRESSION 6650651
SCREW, MACHINE
UOC: AY7, AY8 ..................................................
DEFLECTOR, LINK
UOC: AYT AY8 ..................................................
DEFLECTOR, MOUNT
UOC: AYT AY8 ..................................................
SHOCK, ABSORBER
UOC: AYT AY8 ..................................................
SLIDE ASSY, RH FRONT
UOC: AYT AY8 ..................................................
SLIDE ASSY, LH FRONT
UOC: AYT AY8 ..................................................
WASHER, SPRING TENSION
UOC: AYT AY8 ..................................................
SCREW, CAP, HEX
UOC: AYT AY8 ..................................................
WASHER, FLAT
UOC: AYT AY8 ..................................................
SCREW, CAP, HEX
UOC: AY7, AY8 ..................................................
CRADLE, MACHINE GUN
UOC: AYT AY8 ..................................................
PIN, SHOULDER, HEADLESS
UOC: AYT AY8 ..................................................
STOP ASSY, DEPRESSION
UOC: AYT AY8 ..................................................
STUD, CONTINUOUS
UOC: AYT AY8 ..................................................
SETSCREW
UOC: AYT AY8 ..................................................
NUT, PLAIN, HEX
UOC: AYT AY8 ..................................................
PIN ASSY, QUICK RELEASE
UOC: AYT AY8 ..................................................
PIN ASSY, QUICK-RELEASE
UOC: AYT AY8 ..................................................
SHAFT, STRAIGHT
UOC: AYT AY8 ..................................................
SLIDER ASSY, REAR
UOC: AYT AY8 ..................................................

C-33-1

QTY

8
2
2
2
1
1
4
3
3
3
1
2
1
1
2
2
1
1
1
1

Change 4

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

(1)
ITEM
NO

(2)
SMR
CODE

(3)

(4)
PART
NUMBER

CAGEC

PAFZZ

96906

MS35307-332

PAFZZ

53711

6650439-2

PAFZZ

53711

6650444

PAFZZ

53711

6650441

(5)
DESCRIPTION

AND USABLE ON CODES

(UOC)

MACHINE, BOLT
UOC: AYT AY8 ..................................................
SHAFT, STRAIGHT
UOC: AYT AY8 ..................................................
BRACKET, MOUNTING
UOC: AYT AY8 ..................................................
BRACKET, MOUNTING
UOC: AYT AY8 ..................................................
END OF FIGURE

C-33-2

(6)
QTY

6
2
2
2

Section II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

._3'

* Furnished with identically numbered item.

FigureC-34. HolderAssembly,Ammo, .50 Caliber 6650724.

SECTION
(1)
ITEM
NO

11
(2)
SIVIR
CODE

(3)
CAGEC

Trv19-1 005-245-1 3&P

(4)
PART
NUMBER

DESCRIPTION

AND USABLE ON CODES (UOC)

GROUP02
FIG.C-34 HOLDER ASSY, AMMO_50
6650724
1

PAOZZ

96906

MS21044C3

PAOZZ

96906

MS51958-64B

PAOZZ

94222

37-10-086-20

XAOZZ

53711

6650435

(6)

(5)

CALIBER

NUT, SELF-LOCKING ............................................

UOCAY8
SCREW, MACHINE ...............................................
UOC:AY8
CATCH, CLAMPING ...............................................
UOC:AY8
HOLDER, AMMO CAN ...........................................
UOC:AY8
END OF FIGURE

C-34-1

QTY

4
4
1
1

Section II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

@
O

Figure
C-35.Bracket,
Mounting
12929150

SECTION
(1)
ITEM
NO

II
(2)
SMR
CODE

(3)
CAGEC

TM9-1005-245-13&P
(4)
PART
NUMBER

(5)
DESCRIPTION

AND USABLE ON CODES (UOC)

GROUP 03
FIG.C-35 BRACKET,
12929150
1

XAOZZ

19200

12929159

PAOZZ

19200

12953608

PAOZZ

19200

12929251

PAOZZ

53711

5820087-5

QTY

MOUNTING

BRACKET, WELDMENT .........................................

UOC:AY8
.........................
THUMBSCREW ...........................
UOC:AY8
.....................................
PIN SHOULDER,HEADED
UOC:AY8
CHAIN ASSY ..........................................................
UOC:AY8
END OF FIGURE

C-35-1

(6)

1
1
1
1

Section II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

FigureC-36. Catch Bag Assembly6650723.

Section

(1)
ITEM
NO

(2)
SMR
CODE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322
(3)
CAGEC

(4)
PART
NUMBER

(5)
DESCRIPTION

GROUP04
FIG.C-36
1

XA077

53711

6650671

PAOZZ

53711

6650722-1

PAOZZ

53711

6650722-2

PAOZZ

53711

6650433-2

AND USABLE ON CODES

(UOC

QTY

CATCH BAG ASSY, 6650723

FRAME, CATCH BAG

UOC: AY8 ...........................................................
BAG, CASINGS, OLIVE
UOC: AY8 ...........................................................
BAG, CASINGS, SAND
UOC: AY8 ...........................................................
PIN, QUICK-RELEASE
UOC: AY8 ...........................................................
END OF FIGURE

C-36-1

(6)

1
1
1
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

3
1

2
6

5
4

8
3
10

15
13
12
14
21

17--

Change 4

Figure C-37. Adapter, Universal Pintle, 12012061, Arm Assembly,

Traverse, 6650488, and Body Assembly, 6650487

SectionII

(1)
ITEM
NO

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(2)
SMR
CODE

(3)
CAGEC

(4)
PART
NUMBER

PAFFF

53711

6650488

PAFZZ

53711

6650496

PAFZZ

53711

6650501

XAFZZ

53711

6650489

PAFZZ

53711

6650561

PAFZZ

19205

5140237

PAFZZ

53711

6650494

PAFZZ

53711

6650493

XAFZZ

53711

12012063

PAOZZ

53711

12012064

PAOZZ

96906

MS51958-79B

PAFZZ

19200

12012071

PAFZZ

19200

12012067

PAFZZ

53711

12012065

PAFZZ

19205

5140237

PAFZZ

53711

6650561

PAOOO

19200

12012075

XAOZZ

19200

12012074

PAOZZ

19200

12012076

PAFZZ

53711

6650498

PAFZZ

96906

MS1 6562-223

(5)
DESCRIPTION

GROUP 05,0501, 0502

FIG.C-37 ADAPTER, UNIVERSAL PINTLE,
12012061, ARM ASSY,
TRAVERSE, 6650488, BODY
ASSY, 12012062
ARM ASSY, TRAVERSE
UOC: AY8 ...........................................................
INDICATOR,
AZIMUTH
UOC: AY8 ...........................................................
BOLT, SHOULDER
UOC: AY8 ...........................................................
..ARM, ADJUSTABLE
UOC: AY8 ...........................................................
..PLATE, RETAINING
UOC: AY8 ...........................................................
..SCREW, MACHINE
UOC: AY8 ...........................................................
-BUSHING, SLEEVE
UOC: AY8 ...........................................................
BUSHING, SLEEVE
UOC: AY8 ...........................................................
BODY
UOC: AY8 ...........................................................
PIN AND CABLE ASSY
UOC: AY8 ...........................................................
SCREW, MACHINE
UOC: AY8 ...........................................................
SPLIT RING
UOC: AY8 ...........................................................
PIN, STRAIGHT, HEADLESS
UOC: AY8 ...........................................................
HANDLE, MANUAL CONTROL
UOC: AY8 ...........................................................
SCREW, MACHINE
UOC: AY8 ...........................................................
..PLATE, RETAINING
UOC: AY8 ...........................................................
BRACKET, TRAVEL LOCK ASSY
UOC: AY8 ...........................................................
BRACKET, TRAVEL LOCK
UOC: AY8 ........................................................
PIN, QUICK RELEASE
UOC: AY8 ........................................................
THUMBSCREW
UOC: AY8 ...........................................................
PIN, SPRING
UOC:AY8 ...........................................................
END

C-37-1

AND USABLE ON CODES

(UOC)

Change

OF FIGURE

(6)
QTY

1
1
2
1
1
4
1
1
1
1
2
1
1
1
4
1
1
1
1
1
1

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-1 3&P/1
AIR FORCE T.O. 11W2-8-1-322

Figure C-38. Mount, Pedestal, Machine

Gun, M6 12956270 (Assembled

View)

Section

(1)
ITEM
NO

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(2)
SMR
CODE

(3)
CAGEC

(4)
PART
NUMBER

(5)
DESCRIPTION

AND USABLE ON CODES

(UOC)

GROUP OO
FIG.C-38 MOUNT,PEDESTAL,MACHINE
M6 12956270 (ASSEMBLED VIEW)
1

PAOOO

19200

12956270

(6)

GUN

MOUNT, PEDESTAL, MACHINE GUN,M6

(SEE FIG.C-39 FOR BREAKDOWN) ..................
END OF FIGURE

C-38-1 Change 3

QTY

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

5
5

88.,
8

8
7

Change

Figure C-39. Mount, Pedestal, Machine Gun, M6 12956270 (Sheet 1 of 3)

Section

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

9
8

9
9

Figure C-39. Mount, Pedestal, Machine Gun, M6 12956270 (Sheet 2 of 3)

Section II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11 W2-8-1-322

12
18

17
8
7--,8

C>
C>
C>
C>

8'---l

5,A
15

Change

Figure C-39. Mount, Pedestal, Machine Gun, M6 12956270 (Sheet 3 of 3)

SECTION II

(1)
ITEM
NO

(2)
SMR
CODE

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(3)
CAGEC

(4)
PART
NUMBER

(5)

(6)

DESCRIPTION AND USABLE ON CODES

(UOC)

QTY

GROUP 00
FIG.C-39 MOUNT,PEDESTAL,MACHINE GUN,
M6,
12956270
1

PAOZZ

2U092 307328.00

PAOZZ

2U092 307307.00

PAOZZ

2U092 307331.00

PAOZZ

2U092 307329.00

PAOZZ

96906 MS90726-115

PAOZZ

96906 MS51412-9

PAOZZ

81349 M45913/1-BFG5C

PAOZZ

96906 MS35338-48

PAOZZ

2U092 307312.00

PAOZZ

2U092 307311.00

PAOZZ

2U092 307302.00

PAOZZ

2U092 307326.00

PAOZZ

96906 B1821BH050C400N

PAOZZ

96906 MS51943-33

XAOZZ

2U092 307305.00

PAOZZ

2U092 307310.00

PAOZZ

96906 B1821BH050F450N

PAOZZ

2U092 307316.00

INSERT,THREADED .........................................
UOC:BB7
CLAMP ASSY,RETAIN ......................................
UOC:BB7
WIRE CORD, ROPE ..........................................
UOC:BB7
PIN,QUICK RELEASE .......................................
UOC:BB7
SCREW,CAP, HEXAGON H ..............................
UOC:BB7
WASHER,FLAT ..................................................
UOC:BB7
NUT,SELF-LOCKING,HE ..................................
UOC:BB7
WASHER,LOCK .................................................
UOC:BB7
BRACE,GUN MOUNT,PED ...............................
UOC:BB7
TUBE,STRUCTURAL,EXTERNAL ....................
UOC:BB7
TUBE,STRUCTURAL,INTERNAL .....................
UOC:BB7
PIN,STRAIGHT THREADED .............................
UOC:BB7
SCREW,CAP,HEXAGON H ...............................
UOC:BB7
NUT,SELF-LOCKING,HE ..................................
UOC:BB7
FRAME,MOUNT WELDMENT ...........................
UOC:BB7
ADAPTER AND FLANGE ..................................
UOC:BB7
SCREW, HEX HEAD .........................................
UOC:BB7
COLLAR, RETAINING .......................................
UOC:BB7

2
1
1
1
8
5
13
18
4
1
1
1
5
5
1
1
1
1

END OF FIGURE

C-39-1

Change 5

SECTION II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Figure C-40. Mount, M197 12956264 (Assembled View).

Change 5

SECTION II

(1)
ITEM
NO

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(2)
SMR
CODE

(3)
CAGEC

(4)
PART
NUMBER

(5)

(6)

DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUP 00
FIG.C-40 MOUNT, M197
12956264
1

PAOOO

19200

12956264

MOUNT, M197 .......................................................

UOC:BB8

END OF FIGURE

C-40-1

Change 3

SECTION II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Figure C-41. Mount, Machine Gun, M197 12956264.

Change 5

SECTION II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

(1)

(2)

(3)

(4)

ITEM
NO

SMR
CODE

CAGEC

PART
NUMBER

(5)

(6)

DESCRIPTION AND USABLE ON CODES

(UOC)

QTY

GROUP 00
FIG.C-41 MOUNT,MACHINE GUN,M197
12956264
1

PAOOO

53711

19200

53711

19200

5830131

12956265-2

5830063

12986102

PINTLE ADAPTER ASSEMBLY (SEE

FIG.C-44 FOR BREAKDOWN) ...........................
UOC:BB8
TRAVEL LOCK ASSEMBLY (SEE FIG. C-42
FOR BREAKDOWN) ...........................................
UOC:BB8
BRACKET ASSEMBLY, TR (SEE FIG.C-43 FOR
BREAKDOWN .....................................................
UOC:BB8
PINTLE ASSEMBLY, TR (SEE FIG.C-45 FOR
BREAKDOWN .....................................................
UOC:BB8

END OF FIGURE

C-41-1

Change 5

SECTION II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

#
!

%
NOTE
Travel lock components used with the M60 machine gun are
located in the Additional Authorization List (AAL), appendix F.

Figure C-42. Travel Lock Assembly 12956265-2.

Change 5

SECTION II

(1)
ITEM
NO

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(2)
SMR
CODE

(3)
CAGEC

(4)
PART
NUMBER

(6)
DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUP 01
FIG.C-42 TRAVEL LOCK ASSY 12956265-2
1

PAOZZ

96906 MS21044N6

PAOZZ

96906 MS20002-6

PAOZZ

96906 MS90727-70

PAOZZ

19200 12956283-2

PAOZZ

96906 MS17986C725

PAOZZ

19200 12956269

XAOZZ

19200 12956266

NUT,SELF-LOCKING,HE ............................................
UOC:BB8
WASHER,FLAT ...........................................................
UOC:BB8
SCREW,CAP, HEXAGON H .......................................
UOC:BB8
RING,RETAINING .......................................................
UOC:BB8
PIN,QUICK RELEASE ................................................
UOC:BB8
CABLE ASSEMBLY ....................................................
UOC:BB8
BRACKET,TRAVEL LOCK ..........................................
UOC:BB8

1
2
1
1
1
1
1

END OF FIGURE

C-42-1

Change 5

SECTION II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Figure C-43. Bracket Assembly, Travel Lock 5830063.

SECTION II

(1)
ITEM
NO

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(2)
SMR
CODE

(3)
CAGEC

(4)
PART
NUMBER

(6)
DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUP 02
FIG.C-43 BRACKET ASSEMBLY, TRAVEL LOCK
5830063
1

XAOZZ

53711

5830133

PAOZZ

96906

MS35338-45

PAOZZ

96906

MS90725-34

BRACKET ASSEMBLY, TRAVEL LOCK .................

UOC:BB8
WASHER,LOCK ......................................................
UOC:BB8
BOLT,MACHINE .....................................................
UOC:BB8

1
2
2

END OF FIGURE

C-43-1

Change 5

SECTION II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Figure C-44. Pintle Adapter Assembly 5830131.

Change 5

SECTION II

(1)
ITEM
NO

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(2)
SMR
CODE

(3)
CAGEC

(4)
PART
NUMBER

(5)

(6)

DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUP 03
FIG.C-44 PINTLE ADAPTER ASSEMBLY
5830131
1

XAOZZ

53711

5830132

PAOZZ

96906

MS17986C325

PAOZZ

53711

2843009

PAOZZ

96906

MS16996-21

PINTLE ADAPTER .................................................

UOC:BB8
PIN,QUICK RELEASE ...........................................
UOC:BB8
WIRE ROPE ASSEMBLY ......................................
UOC:BB8
SCREW, CAP, SOCKET HE ..................................
UOC:BB8

1
1
1
1

END OF FIGURE

C-44-1

Change 5

This page intentionally left blank

SECTION II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

(1)

(2)

(3)

(4)

(5)

(6)

ITEM
NO

SMR
CODE

CAGEC

PART
NUMBER

DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUP 04
FIG.C-45 PINTLE MOUNT
11010408
For breakdown, refer to Figure C-6.

END OF FIGURE

C-45-1

Change 5

SECTION II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Figure C-46. Mount Pintle Assembly 12986102.

Change 5

SECTION II

(1)
ITEM
NO

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(2)
SMR
CODE

(3)
CAGEC

(4)
PART
NUMBER

(5)

(6)

DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUP 05
FIG.C-46 MOUNT PINTLE ASSEMBLY
12986102
1

XAOZZ

19200

12986103

PAOZZ

19200

12986104

PAOZZ

19200

2843009

PAOZZ

96906

MS16996-21

PINTLE ASSY ........................................................

UOC:BB8
PIN,QUICK RELEASE ...........................................
UOC:BB8
CABLE ASSEMBLY ...............................................
UOC:BB8
SCREW, CAP, SOCKET HE ..................................
UOC:BB8

1
1
1
1

END OF FIGURE

C-46-1

Change 5

SECTION II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Figure C-47. Ammo Adapter Bracket Assembly and Deflector 12986106

Change 5

SECTION II

(1)
ITEM
NO

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(2)
SMR
CODE

(3)
CAGEC

(4)
PART
NUMBER

(5)

(6)

DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUP 06
FIG.C-47 AMMO ADAPTER BRACKET
ASSEMBLY AND DEFLECTOR
12986106
1

PAOZZ

19200

12986106

PAOZZ

80205

MS21044C4

PAOZZ

80205

MS16996-21

KFOZZ

19200

12986105

PAOOO 19200

12976909

DEFLECTOR KIT ....................................................

UOC: BB8
. NUT, SELF-LOCKING...........................................
UOC: BB8
. SCREW, CAP, SOCKET HEAD............................
UOC: BB8
. PLATE, DEFLECTOR ...........................................
UOC: BB8
BRACKET, AMMO ..................................................
UOC: BB8

1
2
2
1
1

END OF FIGURE

C-47-1

Change 5

SECTION II

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

!
$

Figure C-48. Gun Mount Adapter Parts

NPN.

Change 5

SECTION II

(1)
ITEM
NO

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
(2)
SMR
CODE

(3)
CAGEC

(4)
PART
NUMBER

(5)

(6)

DESCRIPTION AND USABLE ON CODES (UOC)

QTY

GROUP 07
FIG.C-48 GUN MOUNT ADAPTER PARTS
NPN
1

PAOZZ

19205

7792991

PAOZZ

96906

MS16624-1043

PAOZZ

19200

12956267

PAOZZ

19205

7792987

PAOZZ

19205

7792986

PAOZZ

19200

12956268

ADAPTER ASSEMBLY, TR ....................................

UOC:BB8
RING, RETAINING .................................................
UOC:BB8
PIN GROOVED, HEADLESS..................................
UOC:BB8
SPRING, HELICAL, COMP ....................................
UOC:BB8
PLUNGER, STUD ...................................................
UOC:BB8
SPACER, SLEEVE..................................................
UOC:BB8

1
2
1
1
1
1

END OF FIGURE

C-48-1/(C-48.2 blank)

Change 5

SECTION II
(3)
(2)
(1)
ITEM
SMR
CODE CAGEC
NO

TM9-1005-245-13&P
(4)
PART
DESCRIPTION
NUMBER

(6)

(5)
AND USABLE

ON CODES(UOC)

QTY

GROUP 9999
FIG.BULK
1 PAFZZ

96906

MS20995C32

WIRE,NONELECTRICAL

AM7,AM9

END OF FIGURE

BULK-1

.........

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
CROSS REFERENCE INDEXES
FIGURE AND ITEM NUMBER INDEX

FIG.
BULK
C-1
C-1
C-2
C-2
C-2
C-2
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-3
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-5
C-5

ITEM

STOCK NUMBER

CAGEC

PART NUMBER

1
1
1
1
2
3
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1
2

9505-00-293-4208
1005-00-710-5599
1005-01-433-1617

96906
19205
19200
19200
19205
19200
19205
19204
19204
19204
19204
19205
19204
96906
19204
19204
19204
19205
19204
96906
96906
19205
19204
19207
19205
19205
19205
96906
19205
19204
19205
19205
19205
19207
19205
19207
96906
96906
19204
19205
19205
19205
19205
19205
96906
96906
19205
19205
19204

MS20995C32
7790723
12976949
7790948
7791119
12976940
11010408
5169880
5559338
5169881
5169882
6108201
5559331
MS51968-8
6108195
5169879
5141950
11010529
6108986
MS51031-48
MS51968-2
5139962
5559337
5140004
5139959
5139997
5559333
MS51943-2
5174192
11010037
5174175
5171495
11010547
5171491
5171492
6158375
MS51943-4
MS35756-2
5139989
11010413
7793002
7793003
5139988
5189757
MS16562-120
MS16624-1043
7792993
10110242
7793004

1005-00-603-4834
1005-01-411-6340
1005-00-945-9756
5306-00-516-9880
1005-00-555-9338
5306-00-516-9881
5306-00-516-9882
3102-00-610-8201
5310-00-732-0559
1005-00-610-8195
5306-00-516-9879
5305-00-514-1950
5310-00-916-2171
1005-00-610-8986
5305-00-054-6869
5310-00-768-0319
5365-00-513-9962
1005-00-555-9337
5315-00-514-0004
5340-00-513-9959
5360-00-513-9997
1005-00-555-9333
5310-01-374-0508
5310-00-517-4192
5120-01-231-0265
1005-00-588-3490
5315-00-517-1495
5360-00-915-5615
4730-00-517-1491
5355-00-517-1492
5355-00-615-8375
5310-00-935-3750
5315-00-616-5517
5305-00-513-9989
5310-00-949-1971
1005-00-722-3850
5360-00-473-5447
5305-00-513-9988
1005-00-518-9757
5315-00-051-8636
5325-00-803-7315
5315-00-809-5417
1005-00-919-7273

I-1 Change 5

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
FIGURE AND ITEM NUMBER INDEX

FIG.

ITEM

STOCK NUMBER

CAGEC

PART NUMBER

C-5
C-5
C-5
C-5
C-5
C-5
C-5
C-5
C-5
C-6
C-6
C-6
C-6
C-7
C-7
C-7
C-7
C-7
C-7
C-8
C-9
C-9
C-9
C-9
C-9
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-10
C-11
C-11

3
4
5
6
7
8
9
10
11
1
2
3
4
1
2
3
4
5
6
1
1
2
3
4
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
15A
16
17
18
19
20
21
22
23
24
1
2

5355-00-513-9982
5305-00-514-0612
5355-00-610-8211
1005-00-513-9994
5365-00-514-0485
1005-00-840-8768
5340-00-513-9995
5360-00-915-5616
5315-00-915-8174
Deleted
Deleted
Deleted
Deleted
5320-00-915-8185
1005-00-514-1080

19204
19204
19204
19204
19205
19204
19204
19205
19205

5139982
5140612
6108211
5139994
5140485
8408768
5139995
11010523
11010522

19205
19205
19205
19205
19205
19204
19204
19200
19204
19200
19204
96906
19204
19204
88044
19205
19200
19205
19204
96906
19204
96906
19204
19204
19204
96906
96906
96906
19204
19205
19204
19205
19204
96906
19204
19205
19204
19200
19204

11010448
5141080
5141081
6140648
5142877
5141121
8403398
5574621
5139973
5559332
5139964
MS24665-834
6507137
5170484
AN174-21A
5170486
8448211
6108397
5559419
MS51031-48
6108395
MS16555-42
6108400
5559423
6193782
MS39086-95
11010526
11010528
6108396
5140237
5141950
11010529
6108402
MS35691-826
6507136
5140219
7149678
11010426
5140211

5360-00-514-2877
1005-00-322-9716
1005-00-557-4621
5306-00-513-9973
1005-00-555-9332
5310-00-513-9964
5315-00-903-3971
1005-00-650-7137
5306-00-297-8753
5306-00-182-1801
5306-00-517-0486
3120-00-610-8397
5305-00-054-6869
5306-00-610-8395
5315-00-902-0419
1005-00-555-9423
5310-00-619-3782
5315-00-812-1008
5310-00-543-5858
3110-00-610-8396
5305-00-514-0237
5305-00-514-1950
5310-00-916-2171
5340-00-610-8402
5310-00-543-5858
1005-00-650-7136
5365-00-514-0219
1005-00-714-9678
1005-00-940-8077
5340-00-514-0211

Change 5 I-2

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
FIGURE AND ITEM NUMBER INDEX

FIG.

ITEM

STOCK NUMBER

CAGEC

PART NUMBER

C-11
C-11
C-11
C-11
C-11
C-11
C-11
C-11
C-12
C-12
C-12
C-12
C-12
C-12
C-12
C-12
C-12
C-12
C-13
C-13
C-13
C-13
C-13
C-13
C-13
C-13
C-13
C-13
C-13
C-13
C-13
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-14
C-15

3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1

5310-00-916-2172
5305-00-514-0213
5315-00-514-0210
3040-00-514-0204
5360-00-514-0209

19205
19204
19205
19204
19205
19204
19205
96906
19204
19205
19205
19204
19204
19204
19205
19204
19205
96906
19200
19205
19204
19204
19200
19205
19204
19204
96906
19205
19205
19204
19205
19205
19204
96906
19205
19204
19200
19205
19205
19207
19205
19207
96906
19205
19204
19205
19200
19205
19200
19200
96906
19204

11010530
5140213
5140210
5140204
5140209
5559428
11010421
MS39086-54
5559424
5140209
5140210
5140204
5140211
5140213
11010530
6108384
11010421
MS39086-54
11010426
11010530
5140213
5140211
5559425
5140215
5140216
5140217
MS39086-54
11010421
5140209
5140204
5140210
5141460
5174113
MS51943-2
5174192
6166497
5174123
5171495
11010547
5171491
5171492
6158375
MS51943-4
11010407
5139989
11010413
5194313
8412295
5140383
5189756
MS16562-120
5140669

5310-00-916-2170
5315-00-812-0762
5360-00-514-0209
5315-00-514-0210
3040-00-514-0204
5340-00-514-0211
5305-00-514-0213
5310-00-916-2172
5310-00-916-2170
5315-00-812-0762
1005-00-940-8077
5310-00-916-2172
5305-00-514-0213
5340-00-514-0211
5360-00-514-0215
5340-00-514-0216
5315-00-514-0217
5315-00-812-0762
5310-00-916-2170
5360-00-514-0209
3040-00-514-0204
5315-00-514-0210
4010-00-514-1460
5315-00-517-4113
5310-01-374-0508
5310-00-517-4192
1005-00-517-4123
5315-00-517-1495
5360-00-915-5615
4730-00-517-1491
5355-00-517-1492
5355-00-615-8375
5310-00-935-3750
5315-00-916-2173
5305-00-513-9989
5310-00-949-1971
3040-00-519-4313
5360-00-305-0725
5305-00-514-0383
5360-00-518-9756
5315-00-051-8636
9905-00-514-0669

I-3 Change 5

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
FIGURE AND ITEM NUMBER INDEX

FIG.

ITEM

C-15
C-15
C-15
C-15
C-15
C-15
C-15
C-15
C-15
C-15
C-16
C-16
C-16
C-16
C-16
C-16
C-17
C-18
C-18
C-18
C-18
C-18
C-18
C-18
C-18
C-18
C-18
C-18
C-19
C-19
C-19
C-19
C-19
C-19
C-19
C-19
C-19
C-19
C-19
C-19
C-19
C-19
C-19
C-19
C-19
C-20
C-20
C-20
C-20
C-20
C-20
C-20

2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
1
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1
2
3
4
5
6
7

STOCK NUMBER

CAGEC

5305-01-167-5845
5355-00-513-9982
5305-00-514-0612
5355-00-610-8211
1005-00-514-0137
5365-00-514-0485
1005-00-840-8768
5340-00-513-9995
5360-00-915-5616
5315-00-915-8174
5320-00-915-8185
1005-00-514-1080

5360-00-514-0209
1005-00-701-2710
5305-00-709-8516
5315-00-839-2325
2590-00-841-9341
5315-00-610-5729
1005-00-941-9338
9505-00-921-0588
5305-00-723-9386
5310-00-057-7080
5310-00-809-4085
1005-00-072-6112
1005-01-187-9615
5315-00-701-2720
1005-01-184-6363
1005-01-184-6365
5305-00-984-6215
5310-00-045-3296
1005-01-184-6364
5330-01-154-0238
1005-01-169-1144
5310-00-559-0070
5305-00-984-6194
5330-01-154-0239
5330-00-167-0638
1005-01-169-1143
5310-00-576-5752
5305-00-989-7434
5310-00-984-3806
1005-01-169-1756
5305-00-983-6625
4030-00-270-5436
4010-00-129-3221

19204
19204
19204
19204
19200
19205
19204
19204
19205
19205
19205
19205
19204
19205
19205
19204
19204
96906
96906
19204
96906
19204
19204
19207
96906
96906
96906
19204
19204
19207
19207
19204
96906
96906
19204
19204
19204
19204
96906
96906
19204
19204
19204
96906
96906
19204
96906
19204
19204
96906
96906
81348

Change 5 I-4

PART NUMBER
5591828
5139982
5140612
6108211
5140137
5140485
8408768
5139995
11010523
11010522
11010448
5141080
5141081
6153118
5140209
5140225
7012810
MS90727-86
MS24665-132
10945028
MS35810-2
7012727
11589551
10907432-4
MS51963-64
MS51922-29
MS27183-16
11631739
7012725
7012720
7012720
7012722
MS35206
MS35338-43
7012724
7070851
7012805-1
7012726
MS35333-38
MS35206-246
7012805-2
7012806
7012701
MS35333-39
MS35207-263
7070704
MS51922-9
7012702
7012713
MS16997-84
MS87006-3
RRC271

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
FIGURE AND ITEM NUMBER INDEX

FIG.

ITEM

C-20
C-20
C-20
C-20
C-20
C-20
C-20
C-20
C-20
C-20
C-20
C-20
C-20
C-20
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-22
C-22
C-23
C-23
C-23
C-23
C-23
C-23
C-23
C-23
C-23
C-23
C-23
C-23
C-23

8
9
10
11
12
13
14
15
16
17
18
19
20
21
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
1
1
1
2
3
4
5
5
6
7
8
8
9
10
11

STOCK NUMBER

CAGEC

1005-00-701-2747
5315-00-842-3044
1005-00-701-2730
5305-00-983-6625
5315-00-701-2804
5340-00-701-2731
5360-00-701-2733
5365-00-701-2732
5315-00-816-1794
5340-00-389-8118
5120-00-701-2762
1005-00-701-2801
3120-00-934-8319
1005-00-701-2759
5305-00-983-8084
3040-00-701-2800
1005-00-701-2756
5315-00-999-4241
5315-00-842-3044
5310-00-707-0734
2530-00-701-2765
5340-00-701-2758
5310-00-809-4061
5310-00-087-4652
5310-00-701-2761
5305-00-723-9383
1005-00-934-8320
5360-00-701-2752
5315-00-889-2518
1005-00-701-2757
5360-00-701-2748
5310-00-701-2749
5320-00-057-5543
5305-00-983-5334
5340-00-701-2760
1005-01-254-0332
1005-01-411-6340
1005-01-252-2820
5305-00-993-7198
5365-01-009-6843

5305-00-921-0042
1005-01-257-9252
1005-00-252-3011
1005-01-429-0427
5315-01-252-2981
1005-01-352-5345
5315-01-408-6009

19204
96906
19204
96906
19204
19204
19207
19204
96906
19204
19207
19204
19204
19204
19204
96906
19204
19204
96906
96906
19207
19204
19204
96906
96906
19207
96906
19204
19207
96906
19204
19204
19207
96906
96906
19204
19200
19200
19200
96906
96906
96906
19200
19200
96906
19200
19200
19200
19200
19200
19200

I-5 Change 5

PART NUMBER
7012747
MS24665-283
7012730
MS16997-84
7012804
7012731
7012733
7012732
MS24665-285
7012740
8668937
7012762
7012801
7012728
7012759
MS16997-60
7012800
7012756
MS51932-59
MS24665-283
7070734
7012765
7012758
MS27183-15
MS51922-17
7012761
MS51963-67
7012753
7012752
MS16556-628
7012757
7012748
7012749
MS35743-11
MS16997-102
7012760
12597090
12976940
12597091
MS24673-4
MS20995C32
MS3215-4037
12597102
12976941
MS18153-58
12597105
12597103
12976945
12597104
12976944
12976943

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
FIGURE AND ITEM NUMBER INDEX

FIG.

ITEM

C-23
C-24
C-24
C-24
C-24
C-24
C-24
C-24
C-24
C-24
C-24
C-24
C-24
C-24
C-25
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-26
C-27
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28

12
1
2
3
4
5
6
7
8
9
10
11
12
13
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

STOCK NUMBER

CAGEC

1005-01-408-5915
5315-00-989-1157
5360-01-255-4199
1005-01-252-2821
1005-01-252-2822
3040-01-253-6871
4710-01-252-3026
5305-00-954-3487
5315-01-293-2142
5365-01-197-4458
5315-00-690-0544
1005-01-252-2823
1005-00-854-4463
1005-00-779-2479
1005-00-121-0778
5305-00-904-4053
5305-00-939-1179
5306-00-854-4464
4010-00-523-6999
5315-00-854-4465
5305-00-984-5695
5310-00-851-2682
5310-00-842-1490
5315-00-019-0777
5310-00-809-5998
5340-00-772-0190
5360-00-772-0187
1005-00-121-0779
5315-00-772-0186
1005-00-704-6650
1005-00-704-6653
5310-00-595-7237
5305-00-269-3233
8140-00-659-0078
9390-00-532-8282
5315-00-538-4055
1005-00-704-6652
5315-00-538-4057
5315-00-811-9105
5310-00-809-4058
5360-00-526-0143
5315-00-839-2325
5340-00-538-4060
1005-00-538-4053
5310-00-407-9566

19200
96906
19200
19200
19200
19200
19200
19200
19200
96906
19200
19200
96906
19200
19207
19204
19204
96906
96906
96906
19207
19204
19204
19207
96906
96906
96906
96906
96906
19204
19204
19205
19204
19205
19204
19204
96906
96906
19204
19204
19204
19204
19204
96906
96906
19207
96906
19204
19204
19204
96906

Change 5 I-6

PART NUMBER
12976942
MS39086-44
12597092
12597095
12597096
12597097
12597098
12597093
12597094
MS35190-271
12597099
11826283
MS39086-93
12597100
10900945
10900948
10900712
MS51096-355
MS20995C32
MS51095-364
10900962
10900949
5236999
10900963
MS35206-315
MS35691-17
MS35692-37
MS24665-291
MS27183-18
10900947
7792982
7792978
10900946
7792977
7046650
7046653
MS35333-42
MS90727-57
6590078
5328284
5384055
7046652
5384057
MS20392-3C41
MS27183-10
5384062
MS24665-132
5384060
5384053
7042930
MS35338-45

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
FIGURE AND ITEM NUMBER INDEX

FIG.
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-29
C-30
C-30
C-30
C-30
C-30
C-30
C-30
C-30
C-30
C-30
C-30
C-30
C-30
C-31
C-31
C-31
C-31
C-31
C-31
C-31
C-31
C-32
C-32
C-32
C-32
C-32
C-32
C-32
C-32
C-32
C-32
C-33
C-33
C-33
C-33
C-33
C-33
C-33

ITEM

STOCK NUMBER
17
18
19
20
21
22
23
24
25
26
27
28
1
1
2
3
4
5
6
7
6
9
10
11
12
13
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
5
6

CAGEC

5310-00-880-7746
5315-00-707-0292
5315-00-704-2932
5305-00-068-0511
5315-00-707-0291
1005-00-629-7412
5310-00-543-4385
5307-00-538-4059
5315-00-538-4056
5360-00-629-7411
5310-00-538-4064
1005-00-783-5494
5305-00-050-4212
5310-00-809-5998
5305-00-719-5238
5310-00-877-5795
1005-00-918-3008
5310-00-809-8553
1005-01-016-6790
5305-00-762-6041
5310-00-832-9719
5305-00-916-2345
1005-00-410-8318
1005-00-918-3007
5340-01-043-7938
1005-01-383-2757
1398-01-387-3095
1005-01-383-2949
5340-01-340-8471
1005-01-388-5679
1010-01-445-6143
1010-01-151-6227
1005-01-383-2949
5360-01-150-1922
5310-00-160-9869
5310-01-206-3478
1005-01-388-5696
5310-01-388-4108
1005-01-386-2011
5315-01-386-0206
5310-00-050-9372
5305-00-172-4180
1005-01-386-4688
5340-01-388-4109
2510-01-387-0586
1005-01-388-5697
1005-01-388-7006
5310-01-142-8417

96906
19207
19205
96906
96906
19207
19204
96906
19204
19204
19207
19204
19204
96906
96906
96906
96906
19207
96906
19204
96906
96906
96906
19204
19207
19204
53711
53711
53711
19200
53711
19200
53711
53711
53711
53711
53711
96906
88044
53711
53711
53711
53711
96906
96906
53711
53711
53711
53711
53711
19200

I-7 Change 5

PART NUMBER
MS57968-5
7070292
7042932
MS35338-046
MS90728-62
7070291
6297412
MS35333-46
5384059
5384056
6297411
5384064
11631740-2
MS90725-186
MS27183-18
B1821BH050F200N
MS21044-N8
10949553-2
MS27183-23
11661033
B1821BH075F250N
MS51922-61
B1821BH075F200N
11661034
10949553-1
8433770-1
6650717
6650724
6650450
12929150
6650723
12012061
5830128
6650450
6650434
5830054
6650725
MS21083C16
AN960XC1616
6650446
6650407
6650406
6650695
MS21083C10
MS51957-61B
6650443
6650442
6650448
6650437
6650436
9363644

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
FIGURE AND ITEM NUMBER INDEX

FIG.
C-33
C-33
C-33
C-33
C-33
C-33
C-33
C-33
C-33
C-33
C-33
C-33
C-33
C-33
C-33
C-33
C-33
C-34
C-34
C-34
C-34
C-35
C-35
C-35
C-35
C-36
C-36
C-36
C-36
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37

ITEM

STOCK NUMBER
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
1
2
3
4
1
2
3
4
1
2
2
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18

CAGEC

5305-00-719-3997
5310-00-151-5572
5305-00-646-7389
1005-01-396-2006
5315-01-387-4379
1010-01-451-7557
5307-01-386-2015
5305-01-386-0209
5310-01-386-0202
5315-01-385-9216
5315-01-385-9214
3040-01-386-0204
1005-01-388-6911
5306-00-637-9675
3040-01-386-5925
5340-01-386-8380
5340-01-387-1944
5310-00-208-9255
5305-00-433-3740
5340-01-282-3650

5355-01-387-4540
5315-01-342-0671
4010-01-149-5518
1005-01-388-5702
1005-01-388-5685
5315-01-385-9216
1290-01-386-2008
5306-01-388-0795
5340-01-388-5595
3110-01-387-0590
5305-00-514-0237
5365-01-386-5924
5340-01-386-8327
5315-01-447-2233
5305-01-075-6083
5325-01-447-2281
5340-01-447-2276
5305-00-514-0237
3110-01-387-0590
5340-01-447-8969

96906
88044
96906
53711
53711
53711
53711
53711
53711
53711
53711
53711
53711
53711
53711
53711
53711
96906
96906
94222
53711
19200
19200
19200
53711
53711
53711
53711
53711
53711
53711
53711
53711
53711
19205
53711
53711
53711
53711
96906
19200
19200
53711
19205
53711
19200
19200

Change 5 I-8

PART NUMBER
MS35307-303
NAS1149C0863B
MS35307-409
6650445
6650673
6650651
6650654
6650696
6650697
6650433-2
6650433-1
6650439-1
6650438
MS35307-332
6650439-2
6650444
6650441
MS21044C3
MS51958-648
37-10-086-20
6650435
12929159
12953608
12929251
5820087-5
6650671
6650722-1
6650722-2
6650433-2
6650488
6650496
6650501
6650489
6650561
5140237
6650494
6650493
12012063
12012064
MS51958-798
12012071
12012067
12012065
5140237
6650561
12012075
12012074

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
FIGURE AND ITEM NUMBER INDEX

FIG.

ITEM STOCK NUMBER

CAGEC

PART NUMBER

C-37
C-37
C-37
C-38
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-40
C-41
C-41
C-41
C-41
C-42
C-42
C-42
C-42
C-42
C-42
C-42
C-43
C-43
C-43
C-44
C-44
C-44
C-44
C-45
C-45
C-45
C-45

19
20
21
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
1
2
3
4
1
2
3
4
5
6
7
1
2
3
1
2
3
4
1
2
3
4

19200
53711
96906
19200
211092
2U092
211092
2U092
96906
96906
81349
96906
2U092
2U092
2U092
211092
96906
96906
2U092
2U092
96906
2U092
19200
53711
19200
53711
19200
96906
96906
96906
19200
96906
19200
19200
53711
96906
96906
53711
96906
53711
96906
19205
19204
19204
19205

12012076
6650498
MS16562-223
12956270
307328.00
307307.00
307331.00
307329.00
MS90726-115
MS51412-9
M45913/1-BFG5C
MS35338-48
307312.00
307311.00
307302.00
307326.00
B1821BH050C400N
MS51943-33
307305.00
307310.00
B1821BH050F450N
307316.00
12956264
5830131
12956265-2
5830063
12986102
MS21044N6
MS20002-6
MS90727-70
12956283-2
MS17986C725
12956269
12956266
5830133
MS35338-45
MS90725-34
5830132
MS17986C325
2643009
MS16996-21
11010409
11010410
11010412
11010411

5315-01-447-2267
5315-01-386-2768
5315-00-826-3251
1005-01-411-6341
5325-01-433-0817
1005-01-442-0415
4010-01-432-5838
5315-01-433-1817
5305-00-226-7768
5310-01-266-4641
5310-00-067-9507
5310-00-003-4094
1005-01-432-4652
4710-01-433-1256
4710-01-432-8193
5315-01-433-1740
5305-00-071-2079
5310-00-814-0673
4730-01-433-8116
5305-01-433-5835
3040-01-434-0789
1005-01-413-4098
1010-01-151-6229
1005-01-480-9118
1010-01-151-6239
1005-01-461-2654
5310-00-950-0039
5310-00-149-9130
5305-00-269-3246
5365-01-306-4235
5315-01-368-7364
4010-01-447-5812

5310-00-407-9566
5306-00-225-8499
5315-01-292-6411
4010-01-151-6230
5305-00-052-9329
5340-00-945-9768
5360-00-945-9954
5315-00-947-7250

I-9 Change 5

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
FIGURE AND ITEM NUMBER INDEX

FIG.

ITEM STOCK NUMBER

CAGEC

PART NUMBER

C-46
C-46
C-46
C-46
C-47
C-47
C-47
C-47
C-47
C-48
C-48
C-48
C-48
C-48
C-48

1
2
3
4
1
2
3
4
5
1
2
3
4
5
6

19200
19200
19200
96906
19200
80205
80205
19200
19200
19205
96906
19200
19205
19205
19200

12986103
12986104
2843009
MS16996-21
12986106
MS21044/C4
MS16996-21
12986105
12976909
7792991
MS16624-1043
12956267
7792987
7792986
12956268

5315-01-461-2651
4010-01-151-6230
5305-00-052-9329
1005-01-648-0552
5310-00-889-2589
5305-00-052-9329
1005-01-431-8324
1005-00-772-0194
5325-00-803-7315
5315-01-434-3288
5360-00-772-0193
1005-00-772-0192
5365-01-434-0883

Change 5 I-10

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
PART NUMBER INDEX

PART NUMBER

STOCK NUMBER

CAGEC

AN174-21A
AN960XC1616
B1821BH050F200N
B1821BH050C400N
B1821BH050F450N
B1821BH075F200N
B182BH075F250N
MS3215-4037
MS16555-42
MS16556-628
MS16562-120

5306-00-182-1801
5310-01-206-3478
5305-00-719-5238
5305-00-071-2079
5305-01-433-5835
5305-00-916-2345
5305-00-762-6041
5365-01-009-6843
5315-00-902-0419
5315-00-889-2518
5315-00-051-8636

88044
88044
96906
96906
96906
96906
96906
96906
96906
96906
96906

MS16562-223
MS16624-1043

5315-00-826-3251
5325-00-803-7315

96906
96906

MS16996-21

5305-00-052-9329

80205

MS16997-60
MS16997-84

5305-00-983-8084
5305-00-983-6625

96906
96906

MS16997-102
MS17986C325
MS17986C725
MS18153-58
MS20002-6
MS20392-3C41
MS20995C32

5305-00-983-5334
5315-01-292-6411
5315-01-368-7364
5305-00-921-0042
5310-00-149-9130
5315-00-811-9105

96906
96906
96906
96906
96906
96906
96906

MS21044C3
MS21044/C4
MS21044N6
MS21044-N8
MS21083C10
MS21083C16
MS24665-132

5310-00-208-9255
5310-00-950-0039
5310-00-877-5795
5310-00-050-9372
5310-00-160-9869
5315-00-839-2325

96906
80205
96906
96906
96906
96906
96906

MS24665-283

5315-00-842-3044

96906

MS24665-285
MS24665-291
MS24665-834
MS24673-4
MS27183-10
MS27183-15
MS27183-16
MS27183-18

5315-00-816-1794
5315-00-019-0777
5315-00-903-3971
5305-00-993-7198
5310-00-809-4058
5310-00-809-4061
5310-00-809-4085
5310-00-809-5998

96906
96906
96906
96906
96906
96906
96906
96906

MS27183-23
MS35190-271
MS35206-246

5310-00-809-8553
5305-00-954-3487
5305-00-984-6194

96906
96906
96906

I-11 Change 5

FIG.

ITEM

C-10
C-32
C-30
C-39
C-39
C-30
C-30
C-23
C-10
C-21
C-4
C-14
C-37
C-4
C-48
C-44
C-46
C-47
C-21
C-20
C-20
C-21
C-44
C-42
C-23
C-42
C-28
BULK
C-23
C-26
C-34
C-47
C-42
C-30
C-32
C-32
C-18
C-28
C-20
C-21
C-20
C-26
C-9
C-23
C-28
C-21
C-18
C-26
C-30
C-30
C-24
C-19

3
5
3
13
17
10
8
4
10
16
18
20
21
19
2
4
4
3
2
5
11
21
2
5
6
2
9
1
3
4
1
2
1
4
10
4
2
12
9
6
16
13
5
2
10
10
10
14
2
6
9
12

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
PART NUMBER INDEX

PART NUMBER

STOCK NUMBER

CAGEC

FIG.

ITEM

MS35206-268
MS35206-315
MS35207-263
MS35307-303
MS35307-332
MS35307-409
MS35333-38
MS35333-39
MS35333-42
MS35338-43
MS35333-46
MS35338-45

5305-00-984-6215
5305-00-984-5695
5305-00-989-7434
5305-00-719-3997
5306-00-637-9675
5305-00-646-7389
5310-00-559-0070
5310-00-576-5752
5310-00-595-7237
5310-00-045-3296
5310-00-543-4385
5310-00-407-9566

96906
96906
96906
96906
96906
96906
96906
96906
96906
96906
96906
96906

MS35338-046
MS35338-48
MS35691-17
MS35691-826
MS35692-37
MS35743-11
MS35756-2
MS35810-2
MS39086-54

5310-00-003-4094
5310-00-851-2682
5310-00-543-5858
5310-00-842-1490
5320-00-057-5543
5315-00-616-5517
5315-00-610-5729
5315-00-812-0762

96906
96906
96906
96906
96906
96906
96906
96906
96906

MS39086-44
MS39086-93
MS39086-95
MS51031-48

5315-00-989-1157
5315-00-690-0544
5315-00-812-1008
5305-00-054-6869

96906
96906
96906
96906

MS51095-364
MS51096-355
MS51412-9
MS51922-9
MS51922-17
MS51922-29
MS51922-61
MS51932-59
MS51943-2

5305-00-939-1179
5305-00-904-4053
5310-01-266-4641
5310-00-984-3806
5310-00-087-4652
5310-00-057-7080
5310-00-832-9719
5315-00-999-4241
5310-01-374-0508

96906
96906
96906
96906
96906
96906
96906
96906
96906

MS51943-33
MS51943-4

5310-00-814-0673
5310-00-935-3750

96906
96906

MS51957-61B
MS51958-64B
MS51958-79B
MS51963-64
MS51963-67
MS51968-2

5305-00-172-4180
5305-00-433-3740
5305-01-075-6083
5305-00-723-9386
5305-00-723-9383
5310-00-768-0319

96906
96906
96906
96906
96906
96906

C-19
C-26
C-19
C-33
C-33
C-33
C-19
C-19
C-28
C-19
C-28
C-28
C-43
C-28
C-39
C-26
C-10
C-26
C-21
C-4
C-18
C-11
C-12
C-13
C-24
C-24
C-10
C-3
C-10
C-26
C-26
C-39
C-20
C-21
C-18
C-30
C-21
C-4
C-14
C-39
C-4
C-14
C-33
C-34
C-37
C-18
C-21
C-3

5
10
17
7
20
9
11
16
2
6
24
16
2
20
8
11
21
12
20
11
4
10
10
9
1
12
14
13
8
5
3
6
2
11
9
9
5
1
3
14
10
12
1
2
11
8
13
14

Change 5 I-12

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
PART NUMBER INDEX

PART NUMBER

STOCK NUMBER

CAGEC

FIG.

ITEM

MS57968-5
MS51968-8
MS87006-3
MS90725-34
MS90725-186
MS90726-115
MS90727-57
MS90727-70
MS90727-86
MS90728-62
M45913/1-BFG5C
NAS1149C0863B
RRC271
307302.00
307305.00
307307.00
307310.00
307311.00
307312.00
307316.00
307326.00
307328.00
307329.00
307331.00
2843009

5310-00-880-7746
5310-00-732-0559
4030-00-270-5436
5306-00-225-8499
5305-00-050-4212
5305-00-226-7768
5305-00-269-3233
5305-00-269-3246
5305-00-709-8516
5305-00-068-0511
5310-00-067-9507
5310-00-151-5572
4010-00-129-3221
4710-01-432-8193

96906
96906
96906
96906
96906
96906
96906
96906
96906
96906
81349
88044
81348
2UO92
2U092
2U092
2U092
2U092
2U092
2U092
2U092
2UO92
2U092
2U092
53711

10900712
10900945
10900946
10900947
10900948
10900949
10900962
10900963
10907432-4
10945028
10949553-1
10949553-2
11010037
10110242
11010407
11010408
11010409
11010410
11010411
11010412
11010413

1005-00-121-0778
1005-00-854-4463
1005-00-121-0779

5310-00-949-1971

19204
19207
19204
19204
19204
19204
19207
19207
19207
19204
19207
19207
19204
19205
19205
19205
19205
19204
19205
19204
19205

11010421

5310-00-916-2170

19205

11010426

1005-00-940-8077

19200

C-28
C-3
C-20
C-43
C-30
C-39
C-28
C-42
C-18
C-28
C-39
C-33
C-20
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-44
C-46
C-26
C-25
C-26
C-26
C-26
C-26
C-26
C-26
C-18
C-18
C-30
C-30
C-4
C-5
C-14
C-2
C-45
C-45
C-45
C-45
C-4
C-14
C-11
C-12
C-13
C-11
C-13

17
7
6
3
1
5
3
3
1
21
7
8
7
11
15
2
16
10
9
18
12
1
4
3
3
3
2
1
18
15
1
7
6
9
7
3
12
5
3
1
13
4
1
2
4
3
13
15
9
9
10
1
1

1005-01-442-0415
4730-01-433-8116
4710-01-433-1256
1005-01-432-4652
3040-01-434-0789
5315-01-433-1740
5325-01-433-0817
5315-01-433-1817
4010-01-432-5838
4010-01-151-6230

1005-00-779-2479
5306-00-854-4464
5315-00-854-4465
9505-00-921-0588
2590-00-841-9341
1005-00-918-3007
1005-00-918-3008
1005-00-919-7273
5315-00-916-2173
1005-00-945-9756
5340-00-945-9768
5360-00-945-9954
5315-00-947-7250

I-13 Change 5

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
PART NUMBER INDEX

PART NUMBER

STOCK NUMBER

CAGEC

FIG.

ITEM

11010448

5320-00-915-8185

19205

11010522

5315-00-915-8174

19205

11010523

5360-00-915-5616

19205

11010526
11010528
11010529

5310-00-543-5858
5310-00-916-2171

96906
96906
19205

11010530

5310-00-916-2172

19205

11010547

5360-00-915-5615

19205

11589551
11631739
11631740-2
11661033
11661034
11826283
12012061
12012063
12012064
12012065
12012067
12012071
12012074
12012075
12012076
12597090
12597091
12597092
12597093
12597094
12597095
12597096
12597097
12597098
12597099
12597100
12597102
12597103
12597104
12597105
12929150
12929251
12929159
12953608
12956264
12956265-2
12956266
12956267

1005-00-941-9338
1005-00-072-6112
1005-00-783-5494
1005-01-016-6790
1005-00-410-8318
5365-01-197-4458
1010-01-445-6143

19204
19204
19204
19204
19204
19200
19200
53711
53711
53711
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200

C-7
C-16
C-5
C-15
C-5
C-15
C-10
C-10
C-3
C-10
C-11
C-12
C-13
C-4
C-14
C-18
C-18
C-29
C-30
C-30
C-24
C-31
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-22
C-23
C-24
C-24
C-24
C-24
C-24
C-24
C-24
C-24
C-24
C-23
C-23
C-23
C-23
C-31
C-35
C-35
C-35
C-40
C-41
C-42
C-48

1
1
11
11
10
10
15
15A
11
19
3
7
2
6
8
6
11
1
7
11
11
6
9
10
14
13
12
18
17
19
1
1
2
7
8
3
4
5
6
10
13
5
8
9
7
4
3
1
2
1
2
7
3

5315-01-447-2233
1010-01-447-2983
5340-01-447-2276
5325-01-447-2281
5340-01-447-8969
5315-01-447-2267
1005-01-254-0332
1005-01-252-2820

4710-01-252-3026
5360-01-255-4199
1005-01-252-2821
1005-01-252-2822
3040-01-253-6871
5315-01-293-2142
1005-01-252-2823
1005-00-252-3011
5315-01-252-2981
1005-01-257-9252
5340-01-340-8471
5315-01-342-0671
5355-01-387-4540
1005-01-413-4098
1005-01-480-9118
5315-01-434-3288
Change 5 I-14

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
PART NUMBER INDEX

PART NUMBER

STOCK NUMBER

CAGEC

FIG.

ITEM

12956268
12956269
12956270
12956283-2
12976909
12976940

5365-01-434-0883
4010-01-447-5812
1005-01-411-6341
5365-01-306-4235
1005-01-431-8324
1005-01-411-6340

19200
19200
19200
19200
19200
19200

C-48
C-42
C-38
C-42
C-47
C-2
C-22
C-23
C-23
C-23
C-23
C-23
C-1
C-41
C-46
C-46
C-47
C-47
C-34
C-3
C-3
C-9
C-9
C-5
C-15
C-4
C-4
C-14
C-5
C-5
C-15
C-3
C-3
C-15
C-11
C-12
C-13
C-11
C-12
C-13
C-16
C-11
C-12
C-13
C-11
C-12
C-13
C-11
C-12
C-13
C-13
C-13

6
6
1
4
5
3
1
5
12
11
10
8
1
4
1
2
4
1
3
18
15
4
2
3
3
16
12
14
6
9
9
19
17
6
6
4
12
7
2
11
5
5
3
13
2
5
4
4
6
3
6
7

12976941
12976942
12976943
12976944
12976945
12976949
12986102
12986103
12986104
12986105
12986106
37-10-086-20
5139959
5139962
5139964
5139973
5139982

1005-01-468-0552
5340-01-282-3650
5340-00-513-9959
5365-00-513-9962
5310-00-513-9964
5306-00-513-9973
5355-00-513-9982

19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
19200
94222
19205
19205
19204
19204
19204

5139988
5139989

5305-00-513-9988
5305-00-513-9989

19205
19204

5139994
5139995

1005-00-513-9994
5340-00-513-9995

19204
19204

5139997
5140004
5140137
5140204

5360-00-513-9997
5315-00-514-0004
1005-00-514-0137
3040-00-514-0204

19205
19207
19200
19204

5140209

5360-00-514-0209

19205

5140210

5315-00-514-0210

19205

5140211

5340-00-514-0211

19204

5140213

5305-00-514-0213

19204

5140215
5140216

5360-00-514-0215
5340-00-514-0216

19205
19204

1005-01-408-5915
5315-01-408-6009
1005-01-352-5345
1005-01-429-0427
1005-01-433-1617
1005-01-461-2656
5315-01-461-2651

I-15 Change 5

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
PART NUMBER INDEX

PART NUMBER

STOCK NUMBER

CAGEC

FIG.

ITEM

5140217
5140219
5140225
5140237

5315-00-514-0217
5365-00-514-0219
5305-00-514-0237

19204
19205
19204
19205

5140383
5140485

5305-00-514-0383
5365-00-514-0485

19200
19205

5140612

5305-00-514-0612

19204

5140669
5141080

9905-00-514-0669
1005-00-514-1080

19204
19205

C-13
C-10
C-16
C-10
C-37
C-37
C-14
C-5
C-15
C-5
C-15
C-15
C-7
C-16
C-7
C-16
C-7
C-14
C-3
C-10
C-7
C-3
C-3
C-3
C-3
C-10
C-10
C-4
C-14
C-4
C-14
C-4
C-14
C-14
C-14
C-4
C-4
C-14
C-14
C-4
C-14
C-26
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-3

8
23
6
17
6
15
18
7
7
4
4
1
2
2
3
3
6
1
10
18
5
9
1
3
4
2
4
7
9
8
10
5
7
2
6
4
2
4
19
17
16
8
5
14
6
26
8
25
13
11
28
6

5141081

19204

5141121
5141460
5141950

4010-00-514-1460
5305-00-514-1950

19204
19205
19204

5142877
5169879
5169880
5169881
5169882
5170484
5170486
5171491

5360-00-514-2877
5306-00-516-9879
5306-00-516-9880
5306-00-516-9881
5306-00-516-9882
5306-00-297-8753
5306-00-517-0486
4730-00-517-1491

19205
19204
19204
19204
19204
19204
19205
19207

5171492

5355-00-517-1492

19205

5171495

5315-00-517-1495

19205

5174113
5174123
5174175
5174192

5315-00-517-4113
1005-00-517-4123
1005-00-588-3490
5310-00-517-4192

19204
19200
19205
19205

5189756
5189757
5194313
5236999
5328284
5384053
5384055
5384056
5384057
5384059
5384060
5384062
5384064
5559331

5360-00-518-9756
1005-00-518-9757
3040-00-519-4313
4010-00-523-6999
9390-00-532-8284
1005-00-538-4053
5315-00-538-4055
5315-00-538-4056
5315-00-538-4057
5307-00-538-4059
5340-00-538-4060
5360-00-526-0143
5310-00-538-4064

19200
19205
19200
19204
19204
19204
19204
19204
19204
19204
19204
19207
19204
19204

Change 5 I-16

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
PART NUMBER INDEX

PART NUMBER

STOCK NUMBER

CAGEC

FIG.

ITEM

5559332
5559333
5559337
5559338
5559419
5559423
5559424
5559425
5559428
5574621

1005-00-555-9332
1005-00-555-9333
1005-00-555-9337
1005-00-555-9338

19200
19205
19204
19204
19204
19204
19204
19200
19204
19200

5591828
5820087-5
5830054
5830063
5830128
5830131
5830132
5830133
6108195
6108201
6108211

5305-01-167-5845
4010-01-149-5518
5360-01-150-1922
1010-01-151-6239
1010-01-151-6227
1010-01-151-6229

C-9
C-3
C-3
C-3
C-10
C-10
C-12
C-13
C-11
C-9
C-31
C-15
C-35
C-32
C-41
C-31
C-41
C-44
C-43
C-3
C-3
C-5
C-15
C-12
C-10
C-10
C-10
C-10
C-10
C-3
C-7
C-16
C-4
C-14
C-14
C-10
C-28
C-28
C-10
C-10
C-28
C-32
C-32
C-33
C-33
C-36
C-32
C-34
C-33
C-33
C-33

3
20
16
2
7
12
1
5
8
1
7
2
4
2
3
7
1
1
1
8
5
5
5
8
9
16
6
11
20
12
4
4
9
11
5
13
27
23
22
1
4
8
7
17
16
3
1
4
5
5
19

6108384
6108395
6108396
6108397
6108400
6108402
6108986
6140648
6153118
6158375
6166497
6193782
6297411
6297412
6507136
6507137
6590078
6650406
6650407
6650433-1
6650433-2
6650434
6650435
6650436
6650437
6650438

1005-00-555-9423

1005-00-557-4621

1005-00-610-8195
3102-00-610-8201
5355-00-610-8211

19204
53711
53711
53711
53711
53711
53711
53711
19204
19205
19204

5355-00-615-8375

19204
19204
19204
19205
19204
19204
19204
19205
19205
19207

5310-00-619-3782
5360-00-629-7411
1005-00-629-7412
1005-00-650-7136
1005-00-650-7137
8140-00-659-0078
1005-01-386-2011
5310-01-388-4108
5315-01-385-9214
5315-01-385-9216

19204
19204
19207
19204
19204
19204
19204
53711
53711
53711
53711

1005-01-388-7006
1005-01-388-5697
1005-01-388-6911

53711
53711
53711
53711
53711

5306-00-610-8395
3110-00-610-8396
3120-00-610-8397
5340-00-610-8402
1005-00-610-8986

I-17 Change 5

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
PART NUMBER INDEX

PART NUMBER

STOCK NUMBER

CAGEC

FIG.

ITEM

6650439-1
6650439-2
6550441
6650442
6650443
6650444
6650445
6650446
6650448
6650450

3040-01-386-0204
3040-01-386-5925
5340-01-387-1944
5340-01-388-4109
1005-01-386-4688
5304-01-386-8380
1005-01-396-2006
1005-01-388-5696
2510-01-387-0586
1005-01-383-2949

53711
53711
53711
53711
53711
53711
53711
53711
53711
53711

6650488
6650489
6650493
6650494
6650496
6650498
6650501
6650561

5340-01-447-3245
5340-01-388-5595
5340-01-386-8327
5365-01-386-5924
1290-01-386-2008
5305-01-386-2768
5306-01-388-0795
3110-01-387-0590

53711
53711
53711
53711
53711
53711
53711
53711

6650651
6650654
6650671
6650673
6650695
6650696
6650697
6650717
6650722-1
6650722-2
6650723
6650724
6650725
7012701
7012702
7012713
7012720
7012722
7012723
7012724
7012725
7012726
7012727
7012728
7012730
7012731
7012732
7012733
7012740

1010-01-451-7557
5307-01-386-2015

53711
53711
53711
53711
53711
53711
53711
53711
53711
53711
53711
53711
53711
19204
19204
19204
19207
19204
19204
19204
19204
19204
19204
19204
19204
19204
19204
19207
19204

C-33
C-33
C-33
C-33
C-33
C-33
C-33
C-32
C-33
C-31
C-31
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-37
C-33
C-33
C-36
C-33
C-32
C-33
C-33
C-31
C-36
C-36
C-31
C-31
C-32
C-19
C-20
C-20
C-19
C-19
C-19
C-19
C-19
C-19
C-18
C-20
C-20
C-20
C-20
C-20
C-20

18
21
23
3
2
22
10
6
4
3
8
1
4
8
7
2
20
3
5
16
12
13
1
11
9
14
15
1
2
2
5
2
3
15
3
4
2
4
3
7
1
10
5
21
10
13
15
14
17

5315-01-387-4379
5315-01-386-0206
5305-01-386-0209
5310-01-386-0202
1005-01-383-2757
1005-01-388-5702
1005-01-388-5685
1005-01-388-5679
1398-01-387-3095
1005-01-169-1143
1005-01-169-1756
5315-00-701-2720
1005-01-184-6365
1005-01-184-6363
1005-01-184-6364
1005-01-187-9615
1005-01-169-1144
3120-00-934-8319
1005-00-701-2730
5340-00-701-2731
5365-00-701-2732
5360-00-701-2733

Change 5 I-18

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
PART NUMBER INDEX

PART NUMBER

STOCK NUMBER

CAGEC

FIG.

ITEM

7012747
7012748
7012749
7012752
7012753
7012756
7012757
7012758
7012759
7012760
7012761
7012762
7012765
7012800
7012801
7012804
7012805-1
7012805-2
7012806
7012810
7042930
7042932
7046650
7046652
7046653
7070291
7070292
7070704
7070734
7070851
7149678
7790723
7790948
7791119
7792977
7792978
7792982
7792986
7792987
7792991
7792993
7793002
7793003
7793004
8403398
8408768

1005-00-701-2747
5360-00-701-2748
5310-00-701-2749
5360-00-701-2752
1005-00-934-8320
1005-00-701-2756
1005-00-701-2757
5340-00-701-2758
1005-00-701-2759
5340-00-701-2760
5310-00-701-2761
5120-00-701-2762
2530-00-701-2765
3040-00-701-2800
1005-00-701-2801
5315-00-701-2804
5330-01-154-0238
5330-01-154-0239
5330-00-167-0638
1005-00-701-2710

19204
19204
19207
19207
19204
19204
19204
19204
19204
19204
19207
19204
19204
19204
19204
19204
19204
19204
19204
19204
19204
19205
19204
19204
19204
19207
19207
19204
19207
C-19
19204
19205
19204
19205
19205
19205
19204
19205
19205
19205
19205
19205
19205
19204
19204
19204

8
18
19
15
14
4
17
9
1
22
12
19
8
3
20
12
9
13
14
1
15
19
1
7
1
22
18
1
7

8412295
8433770-1
8448211
8668937
9363644

5360-00-305-0725
5340-01-043-7938

C-20
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-20
C-21
C-21
C-20
C-20
C-19
C-19
C-19
C-17
C-28
C-28
C-27
C-28
C-28
C-28
C-28
C-20
C-21
8
C-10
C-1
C-2
C-2
C-26
C-26
C-26
C-48
C-48
C-48
C-4
C-4
C-4
C-5
C-8
C-5
C-15
C-14
C-30
C-10
C-20
C-33

5315-00-704-2932
1005-00-704-6650
1005-00-704-6652
1005-00-704-6653
5315-00-707-0291
5315-00-707-0292
5310-00-707-0734
19204
1005-00-714-9678
1005-00-710-5599
1005-00-603-4834
5315-00-772-0186
5360-00-772-0187
5340-00-772-0190
1005-00-772-0192
5360-00-772-0193
1005-00-772-0194
5315-00-809-5417
1005-00-722-3850
5360-00-473-5447
1005-00-322-9716
1005-00-840-8768

5340-00-389-8118
5310-01-142-8417
I-19 Change 5

19205
19204
19200
19207
19200

24
1
1
2
19
17
16
5
4
1
20
14
15
2
1
8
8
17
13
5
18
6

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
NATIONAL STOCK NUMBER INDEX

NSN
5310-00-003-4094
5315-00-019-0777
5310-00-045-3296
5305-00-050-4212
5310-00-050-9372
5315-00-051-8636
5305-00-052-9329
5305-00-054-6869
5320-00-057-5543
5310-00-057-7080
5310-00-067-9507
5305-00-068-0511
1005-00-072-6112
5310-00-087-4652
1005-00-121-0778
1005-00-121-0779
4010-00-129-3221
5310-00-149-9130

FIGURE

ITEM

C-39
C-26
C-19
C-30
C-32
C-4
C-14
C-44
C-47
C-3
C-10
C-21
C-18
C-39
C-28
C-18
C-21
C-26
C-26
C-20
C-42

8
13
6
1
10
18
20
4
3
13
8
20
9
7
21
11
11
2
18
7
2

C-33
C-32
C-19
C-33
C-10
C-34
C-43
C-39
C-23
C-28
C-42
C-20
C-10
C-14
C-8
C-20
C-28
C-43
C-30
C-34
C-4
C-3
C-3
C-9
C-9
C-5
C-4

8
4
14
1
3
1
3
5
8
3
3
6
2
17
1
18
16
2
11
2
15
18
15
4
2
3
16

NSN
5305-00-513-9989
1005-00-513-9994
5340-00-513-9995
5360-00-513-9997
5315-00-514-0004
1005-00-514-0137
3040-00-514-0204

5360-00-514-0209

5315-00-514-0210

5340-00-514-0211

5305-00-514-0213
5310-00-151-5572
5310-00-160-9869
5330-00-167-0638
5305-00-172-4180
5306-00-182-1801
5310-00-208-9255
5306-00-225-8499
5305-00-226-7768
1005-00-252-3011
5305-00-269-3233
5305-00-269-3246
4030-00-270-5436
5306-00-297-8753
5360-00-305-0725
1005-00-322-9716
5340-00-389-8118
5310-00-407-9566
1005-00-410-8318
5305-00-433-3740
5360-00-473-5447
5340-00-513-9959
5365-00-513-9962
5310-00-513-9964
5306-00-513-9973
5355-00-513-9982
5305-00-513-9988

5360-00-514-0215
5340-00-514-0216
5315-00-514-0217
5365-00-514-0219
5305-00-514-0237

5305-00-514-0383
5365-00-514-0485
5305-00-514-0612
9905-00-514-0669
1005-00-514-1080
4010-00-514-1460
5305-00-514-1950
5360-00-514-2877
5306-00-516-9879
5306-00-516-9880
5306-00-516-9881
5306-00-516-9882
5306-00-517-0486
4730-00-517-1491
5355-00-517-1492

Change 5 I-20

FIGURE

ITEM

C-4
C-14
C-5
C-5
C-15
C-3
C-3
C-15
C-11
C-12
C-13
C-11
C-12
C-13
C-16
C-11
C-12
C-13
C-11
C-12
C-13
C-11
C-12
C-13
C-13
C-13
C-13
C-10
C-10
C-37
C-37
C-14
C-5
C-15
C-5
C-15
C-15
C-7
C-16
C-14

12
14
6
9
9
19
17
6
6
4
12
7
2
11
5
5
3
13
2
5
4
4
6
3
6
7
8
23
17
6
15
18
7
7
4
4
1
2
2
1

C-3
C-10
C-7
C-3
C-3
C-3
C-3
C-10
C-4
C-14
C-4
C-14

10
18
5
9
1
3
4
4
7
9
8
10

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
NATIONAL STOCK NUMBER INDEX

NSN
5315-00-517-1495
5315-00-517-4113
1005-00-517-4123
5310-00-517-4192
5360-00-518-9756
1005-00-518-9757
3040-00-519-4313
4010-00-523-6999
5360-00-526-0143
9390-00-532-8284
1005-00-538-4053
5315-00-538-4055
5315-00-538-4056
5315-00-538-4057
5307-00-538-4059
5340-00-538-4060
5310-00-538-4064
5310-00-543-4385
5310-00-543-5858
1005-00-555-9332
1005-00-555-9333
1005-00-555-9337
1005-00-555-9338
1005-00-555-9423
1005-00-557-4621
5310-00-559-0070
5310-00-576-5752
1005-00-588-3490

5310-00-595-7237
1005-00-603-4834
5315-00-610-5729
1005-00-610-8195
3102-00-610-8201
5355-00-610-8211
5306-00-610-8395
3110-00-610-8396
3120-00-610-8397
5340-00-610-8402
1005-00-610-8986
5355-00-615-8375
5315-00-616-5517
5310-00-619-3782

FIGURE

ITEM

C-4
C-14
C-14

5
7
2

C-14
C-4
C-14
C-14
C-4
C-14
C-26
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-28
C-10
C-10
C-9
C-3
C-3
C-3
C-10
C-9
C-19
C-19
C-4
C-4
C-14
C-14
C-28
C-2
C-18
C-3
C-3
C-5
C-15
C-10
C-10
C-10
C-10
C-3
C-4
C-14
C-4
C-10

6
2
4
19
17
16
8
11
5
14
6
26
8
25
13
28
24
15
21
3
20
16
2
12
1
11
16
4
2
4
10
2
2
4
8
5
5
5
9
16
6
20
12
9
11
11
13

NSN
5360-00-629-7411
1005-00-629-7412
5306-00-637-9675
5305-00-646-7389
1005-00-650-7136
1005-00-650-7137
8140-00-659-0078
5315-00-690-0544
1005-00-701-2710
5315-00-701-2720
1005-00-701-2730
5340-00-701-2731
5365-00-701-2732
5360-00-701-2733
1005-00-701-2747
5360-00-701-2748
5310-00-701-2749
5360-00-701-2752
1005-00-701-2756
1005-00-701-2757
5340-00-701-2758
1005-00-701-2759
5340-00-701-2760
5310-00-701-2761
5120-00-701-2762
2530-00-701-2765
3040-00-701-2800
1005-00-701-2801
5315-00-701-2804
5315-00-704-2932
1005-00-704-6650
1005-00-704-6652
1005-00-704-6653
5315-00-707-0291
5315-00-707-0292
5310-00-707-0734
5305-00-709-8516
1005-00-710-5599
1005-00-714-9678
5305-00-719-3997
5305-00-719-5238
1005-00-722-3850
5305-00-723-9383
5305-00-723-9386
5310-00-732-0559
5305-00-762-6041
5310-00-768-0319
5315-00-772-0186
5360-00-772-0187
5340-00-772-0190
1005-00-772-0192
5360-00-772-0193

I-21 Change 5

FIGURE

ITEM

C-28
C-28
C-33
C-33
C-10
C-10
C-28
C-24
C-17
C-19
C-20
C-20
C-20
C-20
C-20
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-21
C-20
C-21
C-21
C-20
C-20
C-28
C-27
C-28
C-28
C-28
C-28
C-21
C-18
C-1
C-10
C-33
C-30
C-4
C-21
C-18
C-3
C-30
C-3
C-26
C-26
C-26
C-48
C-48

27
23
20
9
22
1
4
12
1
2
10
13
15
14
8
18
19
15
4
17
9
1
22
12
19
8
3
20
12
19
1
7
1
22
18
7
1
1
24
7
3
14
13
8
7
8
14
19
17
16
5
4

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
NATIONAL STOCK NUMBER INDEX

NSN
1005-00-772-0194
1005-00-779-2479
1005-00-783-5494
5325-00-803-7315
5310-00-809-4058
5310-00-809-4061
5310-00-809-4085
5315-00-809-5417
5310-00-809-5998
5310-00-809-8553
5315-00-811-9105
5315-00-812-0762

5315-00-812-1008
5310-00-814-0673
5315-00-816-1794
5315-00-826-3251
5310-00-832-9719
5315-00-839-2325
1005-00-840-8768
2590-00-841-9341
5310-00-842-1490
5315-00-842-3044
5310-00-851-2682
1005-00-854-4463
5306-00-854-4464
5315-00-854-4465
5310-00-877-5795
5310-00-880-7746
5315-00-889-2518
5315-00-902-0419
5315-00-903-3971
5305-00-904-4053
5360-00-915-5615
5360-00-915-5616
5315-00-915-8174
5320-00-915-8185
5310-00-916-2170

5310-00-916-2171

FIGURE
C-48
C-26
C-29
C-4
C-48
C-28
C-21
C-18
C-4
C-26
C-30
C-30
C-28
C-11
C-12
C-13
C-10
C39
C-20
C-37
C-30
C-18
C-28
C-5
C-15
C-18
C-26
C-20
C-21
C-26
C-25
C-26
C-26
C-30
C-28
C-21
C-10
C-9
C-26
C-4
C-14
C-5
C-15
C-5
C-15
C-7
C-16
C-11
C-12
C-13
C-3
C-10

ITEM
1
1
1
19
2
10
10
10
20
14
2
6
9
10
10
9
14
14
16
17
9
2
12
8
8
3
12
9
6
11
1
6
9
4
17
16
10
5
3
6
8
10
10
11
11
1
1
9
9
10
11
19

NSN
5310-00-916-2172

5315-00-916-2173
5305-00-916-2345
1005-00-918-3007
1005-00-918-3008
1005-00-919-7273
5305-00-921-0042
9505-00-921-0588
3120-00-934-8319
1005-00-934-8320
5310-00-935-3750
5305-00-939-1179
1005-00-940-8077
1005-00-941-9338
1005-00-945-9756
5340-00-945-9768
5360-00-945-9954
5315-00-947-7250
5310-00-949-1971
5310-00-950-0039
5305-00-954-3487
5305-00-983-5334
5305-00-983-6625
5305-00-983-8084
5310-00-984-3806
5305-00-984-5695
5305-00-984-6194
5305-00-984-6215
5315-00-989-1157
5305-00-989-7434
5305-00-993-7198
5315-00-999-4241
5365-01-009-6843
1005-01-016-6790
5340-01-.043-7938
4010-01-447-5812
5305-01-075-6083
5310-01-142-8417
4010-01-149-5518
5360-01-150-1922
1010-01-151-6227
1010-01-151-6229
4010-01-151-6230
4010-01-151-6230
1010-01-151-6239

Change 5 I-22

FIGURE

ITEM

C-11
C-12
C-13
C-14
C-30
C-30
C-30
C-5
C-23
C-18
C-20
C-21
C-4
C-14
C-26
C-11
C-13
C-18
C-2

3
7
2
13
10
12
5
1
6
7
21
14
10
12
5
1
1
6
4

C-45
C-45
C-45
C-4
C-14
C-42
C-24
C-21
C-20
C-20
C-21
C-20
C-26
C-19
C-19
C-24
C-19
C-23
C-21
C-23
C-30
C-30
C-42
C-37
C-33
C-35
C-32
C-31
C-41
C-44
C-46
C-41

1
2
4
13
15
1
9
21
5
11
2
2
10
12
5
1
17
2
5
4
7
13
6
11
6
4
2
7
1
3
3
3

SECTION IV

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
NATIONAL STOCK NUMBER INDEX

NSN
5330-01-154-0238
5330-01-154-0239
5305-01-167-5845
1005-01-169-1143
1005-01-169-1144
1005-01-169-1756
1005-01-184-6363
1005-01-184-6364
1005-01-184-6365
1005-01-187-9615
5365-01-197-4458
5310-01-206-3478
1005-01-252-2820
1005-01-252-2821
1005-01-252-2822
1005-01-252-2823
5315-01-252-2981
4710-01-252-3026
3040-01-253-6871
1005-01-254-0332
5360-01-255-4199
1005-01-257-9252
5315-01-292-6411
5315-01-293-2142
5340-01-282-3650
5365-01-306-4235
5340-01-340-8471
5315-01-342-0671
1005-01-352-5345
5315-01-368-7364
5310-01-374-0508
1005-01-383-2757
1005-01-383-2949
5315-01-385-9214
5306-01-385-9215
5315-01-385-9216
5310-01-386-0202
3040-01-386-0204
5315-01-386-0206
5305-01-386-0209
1290-01-386-2008
1005-01-386-2011
5307-01-386-2015
5305-01-386-2768
5315-01-386-2770
5315-00-826-3251
3040-01-386-4685
1005-01-386-4688
3040-01-386-4690
5365-01-386-5924

FIGURE
C-19
C-19
C-15
C-19
C-19
C-20
C-19
C-19
C-19
C-19
C-24
C-32
C-23
C-24
C-24
C-24
C-23
C-24
C-24
C-22
C-24
C-25
C-44
C-24
C-34
C-42
C-31
C-35
C-23
C-42
C-4
C-14
C-31
C-31
C-31
C-33
C-33
C-33
C-36
C-33
C-33
C-32
C-33
C-37
C-32
C-33
C-37
C-37
C-37
C-33
C-33
C-33
C-37

ITEM
9
13
2
15
10
3
3
7
4
1
11
5
1
4
5
13
9
8
6
1
3
7
2
10
3
4
4
3
10
5
1
3
1
3
8
17
16
16
3
15
18
9
14
2
8
13
20
14
21
14
2
15
7

NSN
3040-01-386-5925
5340-01-386-8327
5304-01-386-8380
2510-01-387-0586
3110-01-387-0590
5340-01-387-1944
1398-01-387-3095
5315-01-387-4379
5355-01-387-4540
5306-01-388-0795
5310-01-388-4108
5340-01-388-4109
5340-01-388-5595
1005-01-388-5679
1005-01-388-5685
1005-01-388-5696
1005-01-388-5697
1005-01-388-5702
1005-01-388-6911
1005-01-388-7006
1005-01-396-2006
1005-01-408-5915
5315-01-408-6009
1005-01-411-6340
1005-01-411-6341
1005-01-413-4098
1005-01-429-0427
1005-01-431-8324
1005-01-432-4652
4010-01-432-5838
4710-01-432-8193
5325-01-433-0817
4710-01-433-1256
5315-01-433-1740
5315-01-433-1817
1005-01-433-1617
5305-01-433-5835
4730-01-433-8116
3040-01-434-0789
5365-01-434-0883
5315-01-434-3288
1005-01-442-0415
1010-01-445-6143
5340-01-447-2276
5340-01-447-3245
5340-01-447-8969
1010-01-451-7557
5315-01-461-2651
1005-01-461-2654

1005-01-468-0552
1005-01-480-9118
I-23/(I-24 blank) Change 5

FIGURE

ITEM

C-33
C-37
C-33
C-33
C-37
C-37
C-33
C-31
C-33
C-35
C-37
C-32
C-33
C-37
C-31
C-36
C-32
C-33
C-36
C-33
C-33
C-33
C-23
C-23
C-2
C-22
C-38
C40
C-23
C-47
C-39
C-39
C-39
C-39
C-39
C-39
C-39
C-1
C-39
C-39
C-39
C-48
C-48
C-39
C-31
C-37
C-37
C-37
C-33
C-46
C-41
C-46
C-47
C-41

21
8
22
4
5
16
23
2
11
2
3
7
3
4
5
2
6
5
2
19
5
10
12
11
3
1
1
1
8
5
9
3
11
1
10
12
4
1
17
16
18
6
3
2
6
13
1
17
12
2
4
1
1
2

ARMYTM 9-1005-245-13&P
MARINECORPSTM 1005-13&P/1
AIR FORCET.O. 11
W2-8-1-322

APPENDIX D
BASIC ISSUE ITEMS (B11)LIST
Section I. INTRODUCTION
SCOPE. This appendixlistsbasic issueitemsfor the gun mountsto help you inventorythe itemsfor safe and
efficient operation of the equipment.
GENERAL. These essential items are required to place the gun mounts in operation, to operate them, and to do
emergency repairs. Although shipped separately packaged, B11must be with the gun mounts during operation
and when they are transferred between property accounts. Listing these items is your authority to request/
requisition them for replacement based on authorization of the end Rem by the TOE/MTOE. Illustrations are
furnished to help you find and identify the items.
EXPLANATION
a.

OF COLUMNS.

The following provides an explanation of columns found in the tabular listings.

Column (1) - Illus Number. Gives you the number of the item illustrated.

b. Column (2) - National.Stock

ing purposes.

Number. Identifies the stock number of the item to be used for requisition-

c. Column (3) - Description and Usable On Code. Identifies the Federal item name (in all capital letters)
followed by a minimum description when needed. The last line below the description is the CAGEC, (Contractor
and Government Entity Code) (in parentheses) and the part number.
d. Column (4) - U/I (Unit of Issue). Indicates how the item is issued for the National Stock Number shown
in column (2).
e. Column (5) - Qty Rqd. Indicates the quantity required.

D-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Section II. BASIC ISSUE ITEMS LIST

(1)
Illus
Number

(2)
National
Stock
Number

1005-00-928-6189

D-2

(3)

Usable
On
Code

Description
CAGEC and Part Number

COVER
TRIPOD
MOUNT,
M1
( 19204
) 11686597

AN0

(4)

(5)

U/I

Qty
Rqd

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

APPENDIX E
EXPENDABLE

AND DURABLE

ITEMS LIST

Section I. INTRODUCTION
E-1.

SCOPE

This appendix lists expendable and durable items you will needto maintainthe gun mounts. This listing
is for informational purposes only and is not authority to requisition the listed item. These items are
authorized to you by CTA 50-970, Expendable Items (except Medical, Class V, Repair Parts, and
Heraldic Items).
E-2.

EXPLANATION OF COLUMNS

a. Column (1) - Item number. This number is assigned to the entry in the listing for referencing
when required.
b. Column (2) - Level. This column identifies the lowest level of maintenance that requires the
listed item.
C .................................................................................................
0 .................................................................................................
F .................................................................................................
C.
Column (3) - National Stock Number.
item; use it to request or requisition the item.

Operator/Crew
Unit
Direct Support

This is the national stock number assigned

to the

d.
Column (4) - Description. Indicates the Federal item name and, if reqired, a description to
identify the item. The last line for each item indicates the Contractor and Government Entity Code
(CAGEC) in parentheses followed by the part number.
e.
Column (5) - Unit of Measure (U/M)/Unit of Issue (U/I). This measure is expressed by a
two-character alphabetical abbreviation (e.g., EA, IN., PR). If the unit of measure differs form the unit of
issue as shown in the Army Madter Data File (AMDF), requisition the lowest unit of issue that will satisfy
your requirements.
Section II. EXPENDABLE AND DURABLE ITEMS LIST
(2)

(1)
ITEM
NUMBER

LEVEL

(3)
NATIONAL STOCK
NUMBER

9150-01-054-6453

(4)
DESCRIPTION

CLEANER, LUBRICANT AND PRESERVATIVE

(CLP)
(81349) MIL-L-63460
1 pt bottle
1 gal bottle

(5)
(U/M)l
(U/I)

PT
GL

E-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322
Section III. EXPENDABLE AND DURABLE ITEMS LIST (cont)
(2)

(3)
NATIONAL
STOCK NUMBER

(4)

(1)
ITEM
NUMBER

LEVEL

5350-00-221-0872

CLOTH, ABRASIVE: crocus, ferric oxide and

quartz, jean-cloth-backing,
closed coating,
9 X 11 in. sheet
(81348) P-C-458

8010-00-297-2124

EMAMEL, OLIVE DRAB

(81349) MIL-STD-171

9150-00-190-0905

GREASE, AUTOMOTIVE AND ARTILLERY:

(GAA), 5 lb can
(81349) MIL-G-10924

9150-00-292-9689

LUBRICATING OIL (LAW)

1 qt can
(81349) MIL-L-14107

C
9150-00-687-4241
9150-00-753-4686

E-2

(5)
(U/M)/
(U/I)

DESCRIPTION

LUBRICATING OIL (LSA)

1 qt can
1 gal can
(81349) MIL-L-46000

QT
GL

9150-00-231-6689

LUBRICATING OIL, GENERAL

(PL-S), 1 qt can
(81348) W-L-800

PURPOSE

7920-00-205-1711

RAG, WIPING
50 lb bale
(58536) A-A-2522

8030-01-192-2492

SEALING COMPOUND,
POLYURETHANE
areosol can
(54577) MS1212-01

6850-00-281-1985

SOLVENT, DRY CLEANING

1 gal can
(58536) A-A-711

9505-00-293-4208

WIRE, NONELECTRICAL
(96906) MS20995C32

PLASTIC,

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIRFORCE T.O. 11W2-8-1-322

APPENDIX F
ADDITIONAL AUTHORIZATION LIST(AAL)

Section I. INTRODUCTION
F-1. SCOPE
This appendix lists additional items you are authorized for the support of the M197 Machine Gun Mount.

F-2. GENERAL
This list identifies items that do not have to accompany the M197 Machine Gun Mount and that do not have to be
turned in with it. These items are authorized to you by CTA, MTOE, TDA, or JTA.

F-3. EXPLANATION OF COLUMNS IN THE AAL

a. Column (1) National Stock Number. Identifies the stock number of the item to be used for
requisitioning purposes.
b. Column (2) Description, Commercial and Government Entity Code (CAGEC), and Part Number.
Identifies the Federal item name (in all capital letters) followed by a minimum description when needed. The last
line below the description is the CAGEC (in parentheses) and the part number.
c. Column (3) Usable on Code. When applicable, gives you a code if the item you need is not the same
for different models of equipment. These codes are identified below:
Code
AM5
BB8

Used On
M122 Machine Gun Tripod Mount
M197 Machine Gun Mount

d. Column (4) Unit of Measure (U/M). Indicates the physical measurement or count of the item as issued
per the National Stock Number shown in column (1).
e. Column (5) Qty Recm. Indicates the quantity recommended.

Change 5

F-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIR FORCE T.O. 11W2-8-1-322

Section II. ADDITIONAL AUTHORIZATION LIST

Table 1. Additional Authorization List.
(1)

(2)

(3)

(4)

(5)

NATIONAL
STOCK NUMBER

DESCRIPTION, CAGEC, AND PART

NUMBER

USABLE ON
CODE

U/M

QTY RECM

1005-01-468-0552

DEFLECTOR KIT
(19200) 12986106
(SEE FIGURE C-47)

BB8

1005-01-431-8324

BRACKET, AMMO

BB8

5310-00-889-2589

NUT, SELF-LOCKING
(96906) MS21044-C4

BB8

PLATE, DEFLECTOR
(19200) 12986105

BB8

SCREW, CAP, SOCKET HEAD

(96906) MS16996-21

BB8

5305-00-052-9329

GUN MOUNT ADAPTER PARTS

NPN
(SEE FIGURE C-48)
1005-00-772-0194

ADAPTER ASSEMBLY, TRAVEL

(19205) 7792991

BB8

5315-01-434-3288

PIN, GROOVED, HEADLESS

(19200) 12956267

BB8

1005-00-772-0192

PLUNGER, STUD
(19205) 7792986

BB8

5325-00-803-7315

RING, RETAINING
(96906) MS16624-1043

BB8

5365-01-434-0883

SPACER, SLEEVE
(19200) 12956268

BB8

5360-00-772-0193

SPRING, HELICAL, COMPRESSION

(19205) 7792987

BB8

1005-00-945-9756

MOUNT PINTLE
(19205) 11010408
(SEE FIGURE C-6)

BB8

F-2 Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIRFORCE T.O. 11W2-8-1-322

ALPHABETICAL INDEX
Subject

Page
A

Additional Authorization List (AAL).........................................................................................................

F-1

Ammo Adapter Bracket Assembly and DeflectorMaintenance Instructions (Unit)

Disassembly.......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly .......................................................................................................................................

16-4.2
16-4.2
16-4.2

Assembly and Preparation For Use .......................................................................................................

2-6

B
Basic Issue Items List.............................................................................................................................

D-1

C
Carriage Assembly and Depression Stop AssemblyMaintenance Instructions
(Direct Support)
Disassembly.......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly .......................................................................................................................................

14-8
14-10
14-10

Catch Bag AssemblyMaintenance Instructions (Unit)

14-5
14-5
14-5

Cleaning .................................................................................................................................................

3-3

Common Tools and Equipment..............................................................................................................

4-1

Corrosion Prevention and Control ..........................................................................................................

1-2

D
Destruction of Army Materiel to Prevent Enemy Use.............................................................................

1-1

Differences Between Models..................................................................................................................

1-4

Direct Support Troubleshooting..............................................................................................................

5-1

E
Elevation MechanismMaintenance Instructions (Direct Support)
Repair.................................................................................................................................................

14-16

Elevation Mechanism (Traversing and Clamping Unit) and Elevation Mechanism

(Elevating Unit)Maintenance Instructions (Direct Support)
Disassembly.......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly .......................................................................................................................................

7-14
7-18
7-18

Equipment Characteristics, Capabilities, and Features .........................................................................

Change 5

1-2
Index-1

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIRFORCE T.O. 11W2-8-1-322

ALPHABETICAL INDEX (cont)

Subject

Page
E (cont)

Equipment Data......................................................................................................................................

1-4.1

Expendable and Durable Items List .......................................................................................................

E-1

F
Flexible Machine Gun MountMaintenance Instructions (Direct Support)
Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

9-3
9-4
9-4

Flexible Machine Gun MountMaintenance Instructions (Unit)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

9-1
9-2
9-2

Front Tripod Mount LegMaintenance Instructions (Direct Support)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

7-10
7-11
7-11

.50 Caliber Ammo Holder AssemblyMaintenance Instructions (Unit)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

14-3
14-3
14-3

I
Introduction to PMCS Table, Operator ...................................................................................................
Introduction to PMCS Table, Unit ...........................................................................................................

2-2
4-2

L
Left Rear Tripod Mount LegMaintenance Instructions (Direct Support)
Disassembly .......................................................................................................................................
Inspection/Repair ..............................................................................................................................
Reassembly........................................................................................................................................

7-8
7-9
7-9

Location and Description of Major Components ...................................................................................

1-4

Lubrication Under Unusual Conditions ..................................................................................................

3-1

Lubrication Under Usual Conditions ......................................................................................................

3-1

M
Machine Gun Mount Controls.................................................................................................................

2-1

Maintenance Allocation Chart (MAC) .....................................................................................................

B-1

Index-2

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIRFORCE T.O. 11W2-8-1-322
Subject

Page
M (cont)

Maintenance Forms, Records, and Reports...........................................................................................

1-1

Mechanism Assembly (Traversing and Clamping Unit)Maintenance Instructions (Unit)

6-3
6-3
6-3

Mechanism Assembly (Traversing and Clamping Unit) and Mechanism Assembly

6-11
6-14
6-15

MK93 MOD 0 Machine Gun MountMaintenance Instructions

Repair.................................................................................................................................................

13-1

MK93 MOD 0 Machine Gun Mount and Yoke AssemblyMaintenance Instructions

(Direct Support)
Disassembly.......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly .......................................................................................................................................

14-7
14-7
14-7

MK93 MOD 1 Machine Gun MountMaintenance Instructions (Unit)

Repair.................................................................................................................................................

14-1

Mount Pintle (P/N 11010408)Maintenance Instructions (Unit)

6-4
6-4
6-4

Mount Pintle (P/N 12986102)Maintenance Instructions (Unit) (M249 and M240B)

16-4.1
16-4.1
16-4.1

Mounting BracketMaintenance Instructions (Unit)

14-4
14-4
14-4

M3 Machine Gun Tripod MountMaintenance Instructions (Direct Support)

7-3
7-3
7-3

M3 Machine Gun Tripod MountMaintenance Instructions (Unit)

7-1
7-1
7-1

Change 5

Index-3

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIRFORCE T.O. 11W2-8-1-322

ALPHABETICAL INDEX (cont)

Subject

Page
M (cont)

M3 Machine Gun Tripod Mount, Bearing Assembly Head, and

Machine BoltMaintenance Instructions (Direct Support)
Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

7-4
7-5
7-6

M6 Machine Gun Pedestal MountMaintenance Instructions (Unit)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

15-1
15-3
15-4

M66 Machine Gun Mount RingMaintenance Instructions (Unit)

Disassembly .......................................................................................................................................
Inspection/Repair ..............................................................................................................................
Reassembly........................................................................................................................................

8-1
8-2
8-2

M122/M122A1 Machine Gun Tripod MountMaintenance Instructions (Unit)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

6-1
6-1
6-2

M122/M122A1 Machine Gun Tripod Mount and Traversing and Elevating Mechanism
Maintenance Instructions (Direct Support)
Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

6-5
6-5
6-6

M142 Machine Gun MountMaintenance Instructions (Unit)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

10-1
10-1
10-1

M142 Machine Gun Mount, and Platform AssemblyMaintenance Instructions (Direct Support)
Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

10-2
10-4
10-4

M197 Machine Gun MountMaintenance Instructions (Unit)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

16-1
16-3
16-3

M240E1 Flexible Machine Gun Mount, and Flexible Mount Assembly for M122A1 Tripod Mount
and M240G Machine GunMaintenance Instructions (Unit)
Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

9-1
9-2
9-2

Index-4

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIRFORCE T.O. 11W2-8-1-322
Subject

Page
M (cont)

M240E1 Flexible Machine Gun Mount, and Flexible Mount Assembly for M122A1 Tripod Mount
and M240G Machine GunMaintenance Instructions (Direct Support)
Disassembly.......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly .......................................................................................................................................

9-3
9-4
9-4

M548 Machine Gun Mount Attaching HardwareMaintenance Instructions (Unit)

12-1
12-1
12-1

M548 Machine Gun Mount Legs and Attaching HardwareMaintenance Instructions

12-3
12-3
12-3

O
Official Nomenclature, Names, and Designations..................................................................................

1-1

Operating Procedures ............................................................................................................................

2-19

Operation in Extreme Cold Weather ......................................................................................................

2-20

Operation in Extreme Dusty or Sandy Conditions..................................................................................

2-21

Operation in Extreme Hot Weather ........................................................................................................

2-20

Operation in Rainy, Humid, and Salt Air Conditions ..............................................................................

2-21

Operator PMCS ......................................................................................................................................

2-2

P
Pintle Lock AssemblyMaintenance Instructions (Direct Support)
Disassembly.......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly .......................................................................................................................................

6-20
6-20
6-20

Pintle Mount LatchMaintenance Instructions (Direct Support)

7-23
7-23
7-23

Preembarkation Inspection.....................................................................................................................

4-9

Preparation for Movement ......................................................................................................................

2-19

Preparation for Storage or Shipment......................................................................................................

1-1
4-9

Principles of Operation ...........................................................................................................................

1-6

Change 5

Index-5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIRFORCE T.O. 11W2-8-1-322

ALPHABETICAL INDEX (cont)

Subject

Page
R

References .............................................................................................................................................

A-1

Repair Parts............................................................................................................................................

4-1

Repair Parts and Special Tools List (RPSTL) ........................................................................................

C-1

Reporting Equipment Improvement Recommendations (EIR) ...............................................................

1-1

Right Rear Tripod Mount LegMaintenance Instructions (Direct Support)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

7-12
7-13
7-13

Ring Assembly and RingMaintenance Instructions (Unit)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

8-3
8-3
8-3

Ring Assembly, Ring Assembly, and RingMaintenance Instructions (Direct Support)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

8-6
8-7
8-8

Ring BrakeMaintenance Instructions (Direct Support)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

8-10
8-11
8-11

Ring BrakeMaintenance Instructions (Unit)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

8-4
8-4
8-4

S
Service Upon Receipt of Materiel ...........................................................................................................

4-1

Special Tools, TMDE, and Support Equipment......................................................................................

4-1

6650 .50 Cal Machine Gun MountMaintenance Instructions (Direct Support)

Adjustment .........................................................................................................................................
Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

11-8
11-2
11-5
11-5

6650 .50 Cal Machine Gun MountMaintenance Instructions (Unit)

Disassembly .......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly........................................................................................................................................

11-1
11-1
11-1

Index-6

Change 5

ARMY TM 9-1005-245-13&P
MARINE CORPS TM 1005-13&P/1
AIRFORCE T.O. 11W2-8-1-322
Subject

Page
T

Tripod Leg AssemblyMaintenance Instructions (Direct Support)

6-7
6-9
6-9

Tripod Mount Leg (Left Rear, Front, and Right Rear) Maintenance Instructions (Unit)
Disassembly.......................................................................................................................................
Inspection ...........................................................................................................................................
Reassembly .......................................................................................................................................
Repair.................................................................................................................................................

7-2
7-2
7-2
7-2

Troubleshooting Information...................................................................................................................

4-5

U
Unit PMCS ..............................................................................................................................................

4-2

Unit Troubleshooting ..............................................................................................................................

4-5

Universal Pintle AdapterMaintenance Instructions

14-6
14-6
14-6

Universal Pintle Adapter, Traverse Arm Assembly, and Universal Pintle Adapter
Body AssemblyMaintenance Instructions (Direct Support)
Disassembly.......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly .......................................................................................................................................

14-13
14-14
14-14

Upper Cradle AssemblyMaintenance Instructions (Direct Support)

9-6
9-7
9-7

Y
Yoke Assembly and Carriage AssemblyMaintenance Instructions (Unit)
Disassembly.......................................................................................................................................
Inspection/Repair ...............................................................................................................................
Reassembly .......................................................................................................................................

Change 5

14-2
14-2
14-2

Index-7/(8 blank)

By Order of the Secretary

of the Army:

GORDON R. SULLIVAN
General, United States Army
Chief of Staff

off icial:
1-14@1

41,

MILT-ON H. HAMILTON
Administrative Assistant to the
Secretary of the Army
07926

DISTRIBUTION: To be distributed
in
requirements
for TM 9-1005-245-13&P.

accordance

with

DA Form 12-40-E,

block

1092

RECOMMENDED CHANGES TO PUBLICATIONS AND

BLANK FORMS

For use of this form, see AR 25-30; the proponent agency is ODISC4.

Use Part II (reverse) for Repair Parts and

Special Tool Lists (RPSTL) and Supply
Catalogs/Supply Manuals (SC/SM).

DATE

Date you filled out

this form.

FROM: (Activity and location) (Include ZIP Code)

TO: (Forward to proponent of publication or form) (Include ZIP Code)

AMSTA-LC-CI/TECH PUBS, TACOM-RI

1 Rock Island Arsenal
Rock Island, IL 61299-7630

Your mailing address

PART I ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS
PUBLICATION/FORM NUMBER

DATE

TITLE

TM 9-1005-245-13&P

15 December 1994

Operators, Unit, and Direct Support Maintenance

Manual with Repair Parts and Special Tools (RPSTL) for
Machine Gun Mounts

ITEM
NO.

PAGE
NO.

C-39-1

PARAGRAPH

LINE
NO. *

FIGURE
NO.

TABLE
NO.

RECOMMENDED CHANGES AND REASON

(Provide exact wording of recommended changes, if possible).

SMR Code should be PAOZZ

*Reference to line numbers within the paragraph or subparagraph.

TYPED NAME, GRADE OR TITLE

Your Name
DA FORM 2028, FEB 74

TELEPHONE EXCHANGE/AUTOVON, PLUS

EXTENSION

SIGNATURE

Your Signature
REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED.

USAPPC V3.00

TO: (Forward direct to addressee listed in publication)

FROM: (Activity and location) (Include ZIP Code)

AMSTA-LC-CI/TECH PUBS, TACOM-RI

1 Rock Island Arsenal
Rock Island, IL 61299-7630

Your address

DATE

Date you filled out this

form

PART II REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS
DATE

PUBLICATION NUMBER

TM 9-1005-245-13&P

PAGE
NO.

COLM
NO.

LINE
NO.

15 December 1994

NATIONAL STOCK
NUMBER

PART III REMARKS

TYPED NAME, GRADE OR TITLE

Your Name

REFERENCE
NO.

FIGURE
NO.

ITEM
NO.

TITLE

Operators, Unit, and Direct Support

Maintenance Manual with Repair Parts and
Special Tools (RPSTL) for Machine Gun
Mounts

TOTAL NO.
OF MAJOR
ITEMS
SUPPORTED

RECOMMENDED ACTION

(Any general remarks or recommendations, or suggestions for improvement of publications and

blank forms. Additional blank sheets may be used if more space is needed.)

TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION

SIGNATURE

Your Signature
UASPPC V3.00

Use Part II (reverse) for Repair Parts and

Special Tool Lists (RPSTL) and Supply
Catalogs/Supply Manuals (SC/SM).

RECOMMENDED CHANGES TO PUBLICATIONS AND

BLANK FORMS
For use of this form, see AR 25-30; the proponent agency is ODISC4.
TO: (Forward to proponent of publication or form) (Include ZIP Code)

DATE

FROM: (Activity and location) (Include ZIP Code)

AMSTA-LC-CI/TECH PUBS, TACOM-RI

1 Rock Island Arsenal
Rock Island, IL 61299-7630
PART I- ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS
PUBLICATION/FORM NUMBER

DATE

TITLE

TM 9-1005-245-13&P

15 December 1994

Operators, Unit, and Direct Support Maintenance

Manual with Repair Parts and Special Tools (RPSTL)
for Machine Gun Mounts

ITEM
NO.

PAGE PARA- LINE FIGURE TABLE

NO. GRAPH NO.*
NO.
NO.

RECOMMENDED CHANGES AND REASON

(Provide exact wording of recommended changes, if possible).

*Reference to line numbers within the paragraph or subparagraph.

TYPED NAME, GRADE OR TITLE

DA FORM 2028, FEB 74

TELEPHONE EXCHANGE/AUTOVON, PLUS

EXTENSION

SIGNATURE

REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED.

USAPPC V3.00

TO: (Forward direct to addressee listed in publication)

AMSTA-LC-CI/TECH PUBS, TACOM-RI

1 Rock Island Arsenal
Rock Island, IL 61299-7630

FROM: (Activity and location) (Include ZIP Code)

DATE

PART II REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS
PUBLICATION NUMBER

DATE

TITLE

TM 9-1005-245-13&P

15 December 1994

Operators, Unit, and Direct Support

Maintenance Manual with Repair Parts and
Special Tools (RPSTL) for Machine Gun
Mounts

PAGE
NO.

COLM
NO.

LINE
NO.

NATIONAL STOCK
NUMBER

PART III REMARKS

TYPED NAME, GRADE OR TITLE

REFERENCE
NO.

FIGURE
NO.

ITEM
NO.

TOTAL NO.
OF MAJOR
ITEMS
SUPPORTED

RECOMMENDED ACTION

(Any general remarks or recommendations, or suggestions for improvement of publications and

blank forms. Additional blank sheets may be used if more space is needed.)

TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION

SIGNATURE

UASPPC V3.00

Use Part II (reverse) for Repair Parts and

Special Tool Lists (RPSTL) and Supply
Catalogs/Supply Manuals (SC/SM).

RECOMMENDED CHANGES TO PUBLICATIONS AND

BLANK FORMS
For use of this form, see AR 25-30; the proponent agency is ODISC4.
TO: (Forward to proponent of publication or form) (Include ZIP Code)

DATE

FROM: (Activity and location) (Include ZIP Code)

AMSTA-LC-CI/TECH PUBS, TACOM-RI

1 Rock Island Arsenal
Rock Island, IL 61299-7630
PART I- ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS
PUBLICATION/FORM NUMBER

DATE

TM 9-1005-245-13&P

15 December 1994

ITEM
NO.

PAGE PARA- LINE FIGURE TABLE

NO. GRAPH NO.*
NO.
NO.

TITLE

Operators, Unit, and Direct Support Maintenance

Manual with Repair Parts and Special Tools (RPSTL)
for Machine Gun Mounts

RECOMMENDED CHANGES AND REASON

(Provide exact wording of recommended changes, if possible).

*Reference to line numbers within the paragraph or subparagraph.

TYPED NAME, GRADE OR TITLE

DA FORM 2028, FEB 74

TELEPHONE EXCHANGE/AUTOVON, PLUS

EXTENSION

SIGNATURE

REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED.

USAPPC V3.00

Use Part II (reverse) for Repair Parts and

Special Tool Lists (RPSTL) and Supply
Catalogs/Supply Manuals (SC/SM).

RECOMMENDED CHANGES TO PUBLICATIONS AND

BLANK FORMS
For use of this form, see AR 25-30; the proponent agency is ODISC4.
TO: (Forward to proponent of publication or form) (Include ZIP Code)

DATE

FROM: (Activity and location) (Include ZIP Code)

AMSTA-LC-CI/TECH PUBS, TACOM-RI

1 Rock Island Arsenal
Rock Island, IL 61299-7630
PART I- ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS
PUBLICATION/FORM NUMBER

DATE

TM 9-1005-245-13&P

15 December 1994

ITEM
NO.

PAGE PARA- LINE FIGURE TABLE

NO. GRAPH NO.*
NO.
NO.

TITLE

Operators, Unit, Direct Support Maintenance Manual

with Repair Parts and Special Tools (RPSTL) for
Machine Gun Mounts

RECOMMENDED CHANGES AND REASON

(Provide exact wording of recommended changes, if possible).

*Reference to line numbers within the paragraph or subparagraph.

TYPED NAME, GRADE OR TITLE

DA FORM 2028, FEB 74

TELEPHONE EXCHANGE/AUTOVON, PLUS

EXTENSION

SIGNATURE

REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED.

USAPPC V3.00

Use Part II (reverse) for Repair Parts and

Special Tool Lists (RPSTL) and Supply
Catalogs/Supply Manuals (SC/SM).

RECOMMENDED CHANGES TO PUBLICATIONS AND

BLANK FORMS
For use of this form, see AR 25-30; the proponent agency is ODISC4.
TO: (Forward to proponent of publication or form) (Include ZIP Code)

DATE

FROM: (Activity and location) (Include ZIP Code)

AMSTA-LC-CI/TECH PUBS, TACOM-RI

1 Rock Island Arsenal
Rock Island, IL 61299-7630
PART I- ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS
PUBLICATION/FORM NUMBER

DATE

TITLE

TM 9-1005-245-13&P

15 December 1994

Operators, Unit, Direct Support Maintenance Manual

with Repair Parts and Special Tools (RPSTL) for
Machine Gun Mounts

ITEM
NO.

PAGE PARA- LINE FIGURE TABLE

NO. GRAPH NO.*
NO.
NO.

RECOMMENDED CHANGES AND REASON

(Provide exact wording of recommended changes, if possible).

*Reference to line numbers within the paragraph or subparagraph.

TYPED NAME, GRADE OR TITLE

DA FORM 2028, FEB 74

TELEPHONE EXCHANGE/AUTOVON, PLUS

EXTENSION

SIGNATURE

REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED.

USAPPC V3.00

TO: (Forward direct to addressee listed in publication)

AMSTA-LC-CI/TECH PUBS, TACOM-RI

1 Rock Island Arsenal
Rock Island, IL 61299-7630

FROM: (Activity and location) (Include ZIP Code)

DATE

PART II REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS
PUBLICATION NUMBER

DATE

TITLE

TM 9-1005-245-13&P

15 December 1994

Operators, Unit, and Direct Support

Maintenance Manual with Repair Parts and
Special Tools (RPSTL) for Machine Gun
Mounts

PAGE
NO.

COLM
NO.

LINE
NO.

NATIONAL STOCK
NUMBER

PART III REMARKS

TYPED NAME, GRADE OR TITLE

REFERENCE
NO.

FIGURE
NO.

ITEM
NO.

TOTAL NO.
OF MAJOR
ITEMS
SUPPORTED

RECOMMENDED ACTION

(Any general remarks or recommendations, or suggestions for improvement of publications and

blank forms. Additional blank sheets may be used if more space is needed.)

TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION

SIGNATURE

USAPPC V3.00

THE METRIC SYSTEM AND EQUIVALENTS

LINEAR MEASURE

SQUABE MEASURE

10 Millimeters = 0 0 1 Meter = 0.3937 Inch

1 Centimeter
10 Centimeters = 3.94 Inches
1 Decimeter
1 Meter 10 Decimeters = 100 Centimeters
1000 Millimeters = 39.37 Inches
10 Meters = 32.8 Feet
1 Dekameter
Dekameters = 328.08 Feet
I Hectometer
1 Kilometer = 10 Hectometers = 1000 Meters
= 0.621 Mile = 3,280.8 Feet
Millimeters = Inches limes 25.4
Inches = Millimeters divided by 25.4

100 Sq Millimeters - 0.155 Sq Inch

1 Sq Centimeter
100 Sq Centimeters = 15.5 Sq Inches
I Sq Decimeter
1 Sq Meter (Centare) = 10 Sq Decimeters
= 10,000 Sq Centimeters . 10.764 Sq Feet
1 Sq Dekameter (Are) - 100 Sq Meters = 1,076.4 Sq Feet
1 Sq Hectometer (Hectare) = 100 Sq Dekameters
= 2.471 Acres
1 Sq Kilometer = 100 Sq Hectometers = 1,000,000 Sq Meters
= 0.386 Sq Mile

WEIGHTS

0.061 Cu Inches
1 Cu Centimeter = 1000 Cu Millimeters
61.02 Cu Inches
1 Cu Decimeter = 1000 Cu Centimeters
I Cu Meter = 1000 Cu Decimeters = 1,000,000 Cu Centimeters
35.31 Cu Feet

CUBIC MEASURE

0.154 Grain
10 Milligrams
1 Centigram
1.543 Grains
10
Centigrams
Decigram
1
1 Gram 0.001 Kilogram = 10 Decigrams
1000 Milligrams = 0.035 Ounce
10 Grams = 0.353 Ounce
1 Dekagram
10 Delkagrams = 3.527 Ounces
1 Heclogram
I Kilogram - 10 Hectograms; = 1000 Grams 2.205 Pounds
220.46 Pounds
I Quintal = 100 Kilograms
1.1 Short Tons
1000 Kilograms
Metric
Ton
=
10
Quintals
1
LIQUID MEASURE
1 Milliliter = 0.001 Liter = 0.034 Fluid Ounce
10 Milliliters 0.34 Fluid Ounce
1 Centiliter
1 Deciliter 10 Centiliters 3.38 Fluid Ounces
1000 Milliliters = 33.82 Fluid Ounces
1 Liter = 10 Deciliters
1 Delkaliter - 10 Liters 2.64 Gallons
1 Hectoliter = 10 Dekaliters = 26.42 Gallons
1 Kiloliter = 10 Hectoliters = 264.18 Gallons
APPROXIMATE
IQ_QhAN_(aE

TEMPERATURE
5/9 (OF- 32') 'C
9/5 (-C + 32') OF
-350 Fahrenheit Is equivalent to -370 Celsius
00 Fahrenheit Is equivalent to -370 Celsius
320 Fahrenheit is equivalent to 00 Celsius
900 Fahrenheit is equivalent to 32.20 Celsius
1000 Fahrenheit Is equivalent to 380 Celsius
2120 Fahrenheit Is equivalent to 1000 Celsius

CONVERSION

MULTIPLY BY

Inches ............................. Centimeters ......................... 2@540

0.305
Feet ................................ Meters .................................
Yards .............................. Meters ................................. 0.914
Kilometers ............................ 1.609
Miles ...............................
Square Centimeters ............. 6.451
................
Square Inches
Square Feet .................... Square Meters ..................... 0.093
Square Yards .................. Square Meters ..................... 0.836
Square Miles ................... Square Kilometers ............... 2,590
Acres .............................. Square Hectometers ............ 0.405
Cubic Feet ...................... Cubic Meters ....................... 0.028
Cubic Yards .................... Cubic Meters ....................... 0.765
Fluid Ounces .................. Milliliters ............................. 29.573
Liters ...................................
0.473
Pints ...............................
Liters
......
0.946
............................
Quarts ............................
3.785
...................................
Liters
Gallons ...........................
Ounces ........................... Grams ............................... 28,349
Pounds ........................... Kilograms ............................. 0,454
Short Tons ...................... Metric Tons .......................... 0.907
Pound-Feet ..................... Newton-Meters .................... 1.356
Pound-Inches ............... Newton-Meters ................. 0.11375
Pounds per Square Inch Kilopascals ........................... 6.895
Ounce-Inches ................. Newton-Meters ............... 0.007062
Miles per Gallon .............. Kilometers per Lfter .............. 0.425
Miles per Hour ................ Kilometers per Hour ............. 1.609

FACTORS

TO CHANGE

MULTIPLY BY

0.394
Centimeters ................... Inches ...............................
3.280
Meters ........................... Feet ...................................
1.094
Meters ........................... Yards .................................
.................................
Miles
0.621
Kilometers .....................
Square Centimeters ...... SquareInches ................... 0.155
Square Meters .............. Square Feet ..................... 10.764
Square Meters .............. Square Yards .................... 1.196
Square Kilometers ......... Square Miles ..................... 0.386
Square Hectometers ..... Acres ................................. 2.471
Cubic Meters ................. Cubic Feet ....................... 35.315
Cubic Meters ................. Cubic Yards ....................... 1.308
Milliliters ........................ Fluid Ounces ..................... 0.034
Liters ............................. Pints ..................................
2.113
Liters ............................. Quarts ............................... 1.057
Liters ............................. Gallons .............................. 0.264
Grams ........................... Ounces .............................. 0.035
Kilograms ...................... Pounds .............................. 2.205
Metric Tons ................... Short Tons ......................... 1.102
Newton-Meters .............. Pound-Feet ........................ 0.738
Kilopascals .................... Pounds per Square Inch .... 0.145
Kilometers per Liter ....... Miles per Gallon ................. 2.354
Kilometers per Hour ...... Miles per Hour ................... 0.621
'Fahrenheit ................... OCelsius ............. OC ('F-32)x5/9
OCelsius ......................... OFahrenheft ....... OF (9/5xOC)+32

PIN: 073479-005

TM 9-1005-470-23 P - Field Mainteance Manual For MHS (M17 M18)
100% (3)
TM 9-1005-470-23 P - Field Mainteance Manual For MHS (M17 M18)
152 pages
TM 9-1005-313-23&P
78% (9)
TM 9-1005-313-23&P
346 pages
TM 9-1005-201-23&P
80% (5)
TM 9-1005-201-23&P
274 pages
M242 Technical Document
No ratings yet
M242 Technical Document
911 pages
MK23 Manual
100% (3)
MK23 Manual
604 pages
TM9-1005-213-10 - M2HB - Operator's Manual
100% (3)
TM9-1005-213-10 - M2HB - Operator's Manual
172 pages
TM9 1005 213 23 Support Maint Manual
100% (3)
TM9 1005 213 23 Support Maint Manual
200 pages
MK14 Operators Manual
100% (2)
MK14 Operators Manual
133 pages
TM 9 6115 668 13
No ratings yet
TM 9 6115 668 13
664 pages
TM 9-1005-313-10 Operators Manual M240-Series MG
100% (1)
TM 9-1005-313-10 Operators Manual M240-Series MG
260 pages
TM 9-1005-317-23&p Pistol, Semiautomatic, 9mm, m9 and M9a1 April 2008
100% (4)
TM 9-1005-317-23&p Pistol, Semiautomatic, 9mm, m9 and M9a1 April 2008
182 pages
Practical Guide to the Operational Use of the DShK & DShKM Machine Gun
From Everand
Practical Guide to the Operational Use of the DShK & DShKM Machine Gun
Erik Lawrence
No ratings yet
23 M-16 TM 9-1005-319-23&P
100% (2)
23 M-16 TM 9-1005-319-23&P
396 pages
TM - 11-5855-214-23&p - (N04596) PDF
No ratings yet
TM - 11-5855-214-23&p - (N04596) PDF
65 pages
TM 9-2350-238-24p-2 Recovery Vehicle, Full-Tracked Light, Armored, m578
100% (2)
TM 9-2350-238-24p-2 Recovery Vehicle, Full-Tracked Light, Armored, m578
303 pages
TM 9-1010-223-10
100% (2)
TM 9-1010-223-10
228 pages
Operator's Manual M224 D00011
50% (2)
Operator's Manual M224 D00011
206 pages
M3P Change 1
100% (1)
M3P Change 1
21 pages
TM 9 6230 210 13p Floodlight Set
No ratings yet
TM 9 6230 210 13p Floodlight Set
264 pages
M16A4 M4 Manual
83% (6)
M16A4 M4 Manual
144 pages
TM 9-4940-547-14P Selr NSN 4940-01-110-7422
No ratings yet
TM 9-4940-547-14P Selr NSN 4940-01-110-7422
88 pages
TM 9-1005-317-23P - M9 - Pistol - Semiautomatic - 9mm - 4seiten PDF
0% (1)
TM 9-1005-317-23P - M9 - Pistol - Semiautomatic - 9mm - 4seiten PDF
4 pages
TM11-5855-213-23&P - AN-PVS4 - UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL - 1 - June - 1993
100% (1)
TM11-5855-213-23&P - AN-PVS4 - UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL - 1 - June - 1993
110 pages
TM 10-4930-238-12P
No ratings yet
TM 10-4930-238-12P
180 pages
M26 SHotgun TM 9-1005-341-10 Incl C001
100% (2)
M26 SHotgun TM 9-1005-341-10 Incl C001
136 pages
B67839 M24 Bino
No ratings yet
B67839 M24 Bino
34 pages
Organizational and Intermediate Maintenance Manual With Repair Parts List For M16a2, M16a4, M4, M4a1
No ratings yet
Organizational and Intermediate Maintenance Manual With Repair Parts List For M16a2, M16a4, M4, M4a1
370 pages
Mk16 Scar Om
No ratings yet
Mk16 Scar Om
460 pages
Foreign Firing Table FT-F-82-2 Soviet Mortar 82 MM Models 1936
100% (1)
Foreign Firing Table FT-F-82-2 Soviet Mortar 82 MM Models 1936
26 pages
Us Army TC 23-13 Crew-Served Weapon Night Vision Sight PDF
100% (2)
Us Army TC 23-13 Crew-Served Weapon Night Vision Sight PDF
53 pages
TM 9 1010 221 10 - Grenade - Launcher - M203
100% (2)
TM 9 1010 221 10 - Grenade - Launcher - M203
251 pages
Manual Comp4 m68 Cco
100% (1)
Manual Comp4 m68 Cco
2 pages
Sw370-Am-mmo-10 Pistol, 9mm, Sig Sauer, p226 June 1996
100% (1)
Sw370-Am-mmo-10 Pistol, 9mm, Sig Sauer, p226 June 1996
85 pages
Practical Guide to the Operational Use of the MK19 MOD3 Grenade Launcher
From Everand
Practical Guide to the Operational Use of the MK19 MOD3 Grenade Launcher
Erik Lawrence
No ratings yet
Art II Scope For M14 Manual 1968 PDF
100% (2)
Art II Scope For M14 Manual 1968 PDF
18 pages
FM 44 85 Patriot Battalion and Battery Operations PDF
100% (2)
FM 44 85 Patriot Battalion and Battery Operations PDF
228 pages
2002 US Army M-2 50 CAL 381p PDF
0% (1)
2002 US Army M-2 50 CAL 381p PDF
381 pages
TM 9-1005-319-23&p - M16 Organizational Maint With Repair Parts and Special Tools
No ratings yet
TM 9-1005-319-23&p - M16 Organizational Maint With Repair Parts and Special Tools
396 pages
084598
No ratings yet
084598
104 pages
TM 9-1005-317-10 Pistol, Semiautomatic, 9mm, m9 and M9a1 Dec. 2007
50% (2)
TM 9-1005-317-10 Pistol, Semiautomatic, 9mm, m9 and M9a1 Dec. 2007
156 pages
B49004 (M9 Bayonet)
100% (2)
B49004 (M9 Bayonet)
144 pages
TM 11-6665-245-34P - Radiac - Set - AN - PDR-56 - 1986 PDF
No ratings yet
TM 11-6665-245-34P - Radiac - Set - AN - PDR-56 - 1986 PDF
44 pages
TM 3-6665-343-23&P
0% (1)
TM 3-6665-343-23&P
216 pages
PS 778
No ratings yet
PS 778
34 pages
Manual Tm9 1005 249 23p
No ratings yet
Manual Tm9 1005 249 23p
232 pages
TM 55-1500-345-23
No ratings yet
TM 55-1500-345-23
518 pages
TM11-5855-238-23&P - AN-PVS5 - NV-goggles
No ratings yet
TM11-5855-238-23&P - AN-PVS5 - NV-goggles
234 pages
10-FNH-482 SCAR Tactical Fore-End Installation Instructions
No ratings yet
10-FNH-482 SCAR Tactical Fore-End Installation Instructions
1 page
Manual de Reparacion y Mantto Rifle M107 PDF
100% (1)
Manual de Reparacion y Mantto Rifle M107 PDF
312 pages
PS Magazine - The Preventive Maintenance Monthly 559 (1999) (LOGSA)
No ratings yet
PS Magazine - The Preventive Maintenance Monthly 559 (1999) (LOGSA)
35 pages
TM 9 1025 211 20 and P
No ratings yet
TM 9 1025 211 20 and P
823 pages
TM - 55-1500-345-23 Painting and Marking of Army Aircraft PDF
100% (1)
TM - 55-1500-345-23 Painting and Marking of Army Aircraft PDF
515 pages
PS - 739 - June 2014
No ratings yet
PS - 739 - June 2014
34 pages
TM 10-8400-203-23&amp P Indiv. Equip. Repair May 2010
100% (1)
TM 10-8400-203-23&amp P Indiv. Equip. Repair May 2010
289 pages
TM 9-1005-298-35P - 7.62-mm - Machine - Gun - XM27E - 1969
100% (1)
TM 9-1005-298-35P - 7.62-mm - Machine - Gun - XM27E - 1969
108 pages
TM 9-1005-213-23&P
No ratings yet
TM 9-1005-213-23&P
404 pages
Headquarters, Departments of The Army, Air Force, Marine Corps and Navy December 2007
No ratings yet
Headquarters, Departments of The Army, Air Force, Marine Corps and Navy December 2007
347 pages
M 16 A 2
No ratings yet
M 16 A 2
325 pages
m16 m4 Manual
100% (1)
m16 m4 Manual
325 pages
M16 m4 Service Manual
No ratings yet
M16 m4 Service Manual
325 pages
TM - 9 1025 211 20&P
No ratings yet
TM - 9 1025 211 20&P
17 pages
Army - TM9 1005 319 23
No ratings yet
Army - TM9 1005 319 23
325 pages
Mil HDBK 828a
0% (1)
Mil HDBK 828a
135 pages
2019 Official Match Program
50% (2)
2019 Official Match Program
34 pages
BTR-2 Reticle Measurements in MOA
No ratings yet
BTR-2 Reticle Measurements in MOA
1 page
Technique of Fire of The Rifle Squad FM 23-12 PDF
No ratings yet
Technique of Fire of The Rifle Squad FM 23-12 PDF
128 pages
W3I0003XQ M240B Medium Machinegun
No ratings yet
W3I0003XQ M240B Medium Machinegun
47 pages
SpecterM145 OpticaL Sight
100% (2)
SpecterM145 OpticaL Sight
2 pages
Night Optics Observation Theory
No ratings yet
Night Optics Observation Theory
32 pages
Helmet and Visor
No ratings yet
Helmet and Visor
8 pages
W3I0003XQ M240B Medium Machinegun
No ratings yet
W3I0003XQ M240B Medium Machinegun
47 pages
Ring Sight GL Sight
No ratings yet
Ring Sight GL Sight
2 pages
Spectre 3x Manual
100% (1)
Spectre 3x Manual
2 pages
Specteros4x Manual
100% (1)
Specteros4x Manual
16 pages
Armasight Drone Pro 10x Userguide
No ratings yet
Armasight Drone Pro 10x Userguide
44 pages
Specter Riffle Sights Full Page
No ratings yet
Specter Riffle Sights Full Page
4 pages
Mag Tech Catalogue
No ratings yet
Mag Tech Catalogue
20 pages
SpecterDR Dual Role Optical Sight
100% (1)
SpecterDR Dual Role Optical Sight
2 pages
Spectre DR 1x-4x Manual SML
100% (2)
Spectre DR 1x-4x Manual SML
16 pages
Good Surgical Practice 2008
No ratings yet
Good Surgical Practice 2008
57 pages
Spectre DR 1x-4x Manual SML
100% (2)
Spectre DR 1x-4x Manual SML
16 pages
Treatment of Acute Pancreatitis 2013 PDF
No ratings yet
Treatment of Acute Pancreatitis 2013 PDF
16 pages
Nvs 4 Series Night Vision Weapon Scopes: Specs2006 - 1.qxp 9/18/2006 10:41 AM Page 24
No ratings yet
Nvs 4 Series Night Vision Weapon Scopes: Specs2006 - 1.qxp 9/18/2006 10:41 AM Page 24
1 page
Lapua Tactical Ammunition 2016 A4 ENG
No ratings yet
Lapua Tactical Ammunition 2016 A4 ENG
5 pages
Scan Doc0001
No ratings yet
Scan Doc0001
1 page
Operation Manual: Night Vision Weapon Scope
No ratings yet
Operation Manual: Night Vision Weapon Scope
8 pages
4x & 6x Night Vision Weapon Sights Operator Manual
No ratings yet
4x & 6x Night Vision Weapon Sights Operator Manual
15 pages
Lapua Rimfire 2016 A4 ENG
No ratings yet
Lapua Rimfire 2016 A4 ENG
7 pages
Ammunition: Passive Night Sight PNS 80 (J)
No ratings yet
Ammunition: Passive Night Sight PNS 80 (J)
1 page