Scribd
Upload
31 views

Cardiology - Defibrillator: A: Silence Alarm E: Setup Mode

1) To enter the setup mode of a cardiology defibrillator, press and hold the silence alarm key while turning the knob to the setup mode option. The event list shows operation history and the instrument report shows error history and test results. The battery should be replaced when used for over a year or when capacity is below 70%. 2) Pressing the reset key after replacing the battery updates the battery replacement date. 3) Possible causes for a defibrillator failing to turn on with a blank screen, in order of troubleshooting, are the motherboard, LCD inverter, and LCD unit.

Uploaded by

chanlal
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
31 views

Cardiology - Defibrillator: A: Silence Alarm E: Setup Mode

1) To enter the setup mode of a cardiology defibrillator, press and hold the silence alarm key while turning the knob to the setup mode option. The event list shows operation history and the instrument report shows error history and test results. The battery should be replaced when used for over a year or when capacity is below 70%. 2) Pressing the reset key after replacing the battery updates the battery replacement date. 3) Possible causes for a defibrillator failing to turn on with a blank screen, in order of troubleshooting, are the motherboard, LCD inverter, and LCD unit.

Uploaded by

chanlal
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

Cardiology - Defibrillator

1) To enter System Setup mode, press and hold ( a: Silence Alarm ) key while turning the knob to ( e: Setup mode ) a) Silence Alarm b) Alarm setting c) ECG lead key 2) d) Monitor mode e) Setup mode f) AED mode

( a: Event ) list shows instrument operation history in chronological order ( c: Instrument ) report shows error history, check result of HV capacitor and battery ( d: Defibrillation ) report shows waveform, set energy, energy delivered and date/time a) Error d) Defibrillation b) Event e) 12L ECG c) Instrument f) Discharge It is recommended to replace the battery when it has been used for 1 year or more, or when the battery test result shows that the battery capacity has decreased under ( d: 70% ) a) 85% c) 75% b) 80% d) 70% After battery is replaced with a new one, press ( d: Reset ) key to change the "battery replaced" date to the present date. a) Start c) Blank b) Menu d) Reset

3)

4)

5)

Case study The defibrillator fails to turn on. Nothing is displayed on the screen. Explain 3 possible causes in your preferred troubleshooting order. 1) Mother board 2) LCD inverter 3) LCD unit

Answer a and e

a, c and d

Cardiology - Defibrillator
1) To enter System Setup mode, press and hold ( ) key while turning the knob to ( a) Silence Alarm d) Monitor mode b) Alarm setting e) Setup mode c) ECG lead key f) AED mode ( ) list shows instrument operation history in chronological order ( ) report shows error history, check result of HV capacitor and battery ( ) report shows waveform, set energy, energy delivered and date/time a) Error d) Defibrillation b) Event e) 12L ECG c) Instrument f) Discharge It is recommended to replace the battery when it has been used for 1 year or more, or when the battery test result shows that the battery capacity has decreased under ( ) a) 85% c) 75% b) 80% d) 70% After battery is replaced with a new one, press ( date to the present date. a) Start c) Blank b) Menu d) Reset ) key to change the "battery replaced" )

2)

3)

4)

5)

Case study The defibrillator fails to turn on. Nothing is displayed on the screen. Explain 3 possible causes in your preferred troubleshooting order.

Points allocation 1 point

1 point

1 point

1 point

1 point

You might also like