The document provides a list of qualified memory modules for different DDR3 frequencies, including 1067MHz, 1333MHz, 1600MHz, and 1866MHz. For each memory module, it specifies the vendor, part number, size, chip type, chip manufacturer, chip number, timing, and voltage specifications. It also provides information on installing memory into the 1 DIMM and 2 DIMM socket configuration and notes recommendations for installing over 4GB of memory and for overclocking.
The document provides a list of qualified memory modules for different DDR3 frequencies, including 1067MHz, 1333MHz, 1600MHz, and 1866MHz. For each memory module, it specifies the vendor, part number, size, chip type, chip manufacturer, chip number, timing, and voltage specifications. It also provides information on installing memory into the 1 DIMM and 2 DIMM socket configuration and notes recommendations for installing over 4GB of memory and for overclocking.
The document provides a list of qualified memory modules for different DDR3 frequencies, including 1067MHz, 1333MHz, 1600MHz, and 1866MHz. For each memory module, it specifies the vendor, part number, size, chip type, chip manufacturer, chip number, timing, and voltage specifications. It also provides information on installing memory into the 1 DIMM and 2 DIMM socket configuration and notes recommendations for installing over 4GB of memory and for overclocking.
The document provides a list of qualified memory modules for different DDR3 frequencies, including 1067MHz, 1333MHz, 1600MHz, and 1866MHz. For each memory module, it specifies the vendor, part number, size, chip type, chip manufacturer, chip number, timing, and voltage specifications. It also provides information on installing memory into the 1 DIMM and 2 DIMM socket configuration and notes recommendations for installing over 4GB of memory and for overclocking.
Vendors G.SKILL Vendor Part No. F3-14900CL9D-8GBXL(XMP) PartNum. Size 8GB(2 x 4GB) Size SS/DS Chip Brand DS SS/DS Chip Brand Chip NO. ChipNum. Timing 9-10-9-28 Timing - Dimm Voltage 1.5V Vol. socket support (Op 1 DIMM 2 DIMM
4 DIMM Slots 1 DIMM: Supports one module inserted in any slot as Single-channel memory configuration 2 DIMM: Supports 2 modules inserted into both the blue or black slots as two pairs of Dual-channel memory configuration
-When installing total memory of 4GB capacity or more, Windows 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. -It is recommended to install the memory modules from the slots for better overclocking capability. -The default DIMM frequency depends on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value.
