Scribd
Upload
25 views

Nexus Pro Flash Guide

The document provides instructions for upgrading flash models Nx4203P, 4703P, 503P, and 603P using the MtkTool program in 4 steps: 1. Install the driver before connecting the device to the computer. 2. Open the MtkTool program after connecting the TV and computer via USB. Select the correct flash chip mode, communication port, and 115200 baud rate. 3. Browse and select the proper upgrade file for the TV model and press "Upgrade" to start the process. 4. Check that the upgrade completed successfully in the MtkTool and Device Manager before rebooting the TV.

Uploaded by

bratu.eugen710
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
25 views

Nexus Pro Flash Guide

The document provides instructions for upgrading flash models Nx4203P, 4703P, 503P, and 603P using the MtkTool program in 4 steps: 1. Install the driver before connecting the device to the computer. 2. Open the MtkTool program after connecting the TV and computer via USB. Select the correct flash chip mode, communication port, and 115200 baud rate. 3. Browse and select the proper upgrade file for the TV model and press "Upgrade" to start the process. 4. Check that the upgrade completed successfully in the MtkTool and Device Manager before rebooting the TV.

Uploaded by

bratu.eugen710
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Flash Guide for Models Nx4203P, 4703P, 503P, 603P

Step 1: Installing the driver. (Note: install the driver before attaching device)

Double click the icon to install the driver. Use all default values when installing the driver. After the drivers are installed then attach the device to the computer and the TVs RS232 port. For the first connecting, the computer will recognize and automatically install the USB device. The process is just like the installation of a USB disk.

Step 2: Upgrading with the MtkTool

The MtkTool does not need to be installed. After connecting the TV with your PC, double click icon, open the MtkTool program. Once in the program make sure the following are set correctly. 1- Select mode of Flash chip to MT538X as the below picture. 2- Refer to section below the image to select the right communication port. 3- Press the icon beside the baud rate and make sure it is green as the below picture. 4- Set the flash baud rate to 115200 as the below picture. Click Browse button, navigate to the folder that has the upgrade files and select the proper one for the TV you are flashing. Below is a guide for the appropriate file Nx4203P - LTD42W29NUS_E005_r1.05_0924_INPUT.bin Nx4703P - LTD47W29US_E005_r1.05_0924_INPUT.bin Nx503P - PHD50W29PUS_E004_r1.04_0925_input.bin Nx603P - PHD60W29PUS_E004_r1.04_0925_input.bin Press Upgrade button and start upgrading.

Open Device Manager and find which port is connected with the TV. In above picture, COM4 is connected to the TV; so, select COM4 in the MtkTool main interface. Select the right baud rate. Also make sure the baud rate is set to the right setting on the device in the device manager. It will have successfully finished once the Upgrade button has returned to saying upgrade. Once it is flashed turn the power off on the TV and then turn it back on.

You might also like