Scribd
Upload
476 views

Navicli Commands

The document contains commands for navigating EMC storage arrays and collecting support data. It includes naviseccli commands to get agent information, faults, LUNs, disks, cache usage, CRUs, logs and resume parts. It also provides instructions for collecting support packages from Celerra and VNX arrays using navicli and naviseccli. Disk library commands are presented to get agent info, disks, faults and collect support packages using naviseccli.

Uploaded by

taichiguan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
476 views

Navicli Commands

The document contains commands for navigating EMC storage arrays and collecting support data. It includes naviseccli commands to get agent information, faults, LUNs, disks, cache usage, CRUs, logs and resume parts. It also provides instructions for collecting support packages from Celerra and VNX arrays using navicli and naviseccli. Disk library commands are presented to get agent info, disks, faults and collect support packages using naviseccli.

Uploaded by

taichiguan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

naviseccli naviseccli naviseccli naviseccli naviseccli naviseccli naviseccli naviseccli naviseccli naviseccli naviseccli

getagent getcache faults -list getlun -private -owner -type >c:\lun101.txt getdisk -hs -tla -product -state >c:\hotspare101.txt getcrus >c:\crus101.txt getdisk 2_0_0 -tla -product -state getlog -2000 >c:/logs101.txt getresume >c:\partno101.txt getresume -all >c:\sps101.txt getlog -2000 >c:/logs101.txt

====== navicli getagent navicli getlun -private -owner -type >c:\lun101.txt navicli getcrus >c:\crus101.txt navicli getdisk -hs -tla -product >c:\hotspare101.txt navicli getcache naviseccli faults -list naviseccli getresume >c:\partno101.txt navicli getresume -all >c:\sps101.txt naviseccli getlog -2000 >c:/logs.txt navicli getrg To run BV ======== navicli setsniffer -rg 26 -cr -bv -bvtime high navicli getsniffer -rg 26 Modem dialin ============ naviseccli -h 127.1.1.1 -user naviseccli -h 127.1.1.1 -user naviseccli -h 127.1.1.1 -user naviseccli -h 127.1.1.1 -user -state naviseccli -h 127.1.1.1 -user >c:/logs101.txt naviseccli -h 192.168.127.131 -messner naviseccli -h 192.168.127.131 s -retrieve

nasadmin nasadmin nasadmin nasadmin

-password -password -password -password

nasadmin nasadmin nasadmin nasadmin

-scope -scope -scope -scope

0 0 0 0

getagent getcache faults -list getdisk 1_4_8

nasadmin -password nasadmin -scope 0 getlog -2000 -user admin -password PASSWORD -scope 0 spcollect -user admin -password PASSWORD -scope 0 managefile

naviseccli -h 127.1.1.1 -user nasadmin -password nasadmin -scope te -owner -type >c:\Vikas\lun101.txt naviseccli -h 127.1.1.1 -user nasadmin -password nasadmin -scope ikas\crus101.txt naviseccli -h 127.1.1.1 -user nasadmin -password nasadmin -scope tla -product >c:\Vikas\hotspare101.txt naviseccli -h 172.23.13.10 -user emc -password Bmw520I! -scope 0 naviseccli -h 172.23.13.10 -user emc -password Bmw520I! -scope 0 naviseccli -h 172.23.13.10 -user emc -password Bmw520I! -scope 0 artno12.txt naviseccli -h 172.23.13.10 -user emc -password Bmw520I! -scope 0 >c:\sps101.txt

0 getlun -priva 0 getcrus >c:\V 0 getdisk -hs getcache faults -list getresume >c:\p getresume -all

Celerra commands ================ /nas/sbin/navicli /nas/sbin/navicli /nas/sbin/navicli /nas/sbin/navicli /nas/sbin/navicli -h -h -h -h -h spa spa spa spa spa getagent getcache faults -list getlun -private -owner -type getdisk -hs -tla -product -state

/nas/sbin/navicli -h spa getcrus /nas/sbin/navicli -h spa getdisk -state -tla -hs -product /nas/sbin/navicli -h spa getdisk 0_2_10 -state -tla -hs -product /nas/sbin/navicli -h spa getlun -trespass -private /nas/sbin/navicli -h spa getlog | tail -2000 cat /etc/hosts |grep -i SP /nas/sbin/naviseccli -h spa faults -list

cat /etc/hosts |grep -i SP to get the ip address ************

How to collect SP Collects : Login to putty as nasadmin / nasadmin : cd /nas/tools ./.get_spcollect (after the SP Collects are done) Go to cd /nas/var/log ll (you will be able to see the SP Collects file) ftp ftp.emc.com anonymous (password and username) bin hash cd /incoming/SR/

cd SR mkdir <SR NUMBER> cd /incoming/SR/<dir name> mput SPCOLLECT.zip yes and It will add the SP Collects to the FTP site. ====================================================================== DISK LIBRARY username: dlroot password: !4CustUse cd /opt/Navisphere/bin fclar ./naviseccli -h 10.144.152.23 -user cdlsupport -password wabisabi -scope 0 getag ent ./navicli -h 10.144.152.23 -user cdlsupport -password wabisabi -scope 0 getagent ./naviseccli -h 10.144.152.23 che ./naviseccli -h 10.144.152.23 s -list ./naviseccli -h 10.144.152.23 sk -hs -tla -product ./naviseccli -h 10.144.152.23 us ./naviseccli -h 10.144.152.23 n -private -owner -type -user cdlsupport -password wabisabi -scope 0 getca -user cdlsupport -password wabisabi -scope 0 fault -user cdlsupport -password wabisabi -scope 0 getdi -user cdlsupport -password wabisabi -scope 0 getcr -user cdlsupport -password wabisabi -scope 0 getlu

./naviseccli -h 10.144.152.23 -user cdlsupport -password wabisabi -scope 0 spcol lect -messner ./naviseccli -h 10.144.152.24 -user cdlsupport -password wabisabi -scope 0 spcol lect -messner ./naviseccli -h 10.144.152.23 -user cdlsupport -password wabisabi -scope 0 manag efiles -retrieve ./naviseccli -h 10.144.152.24 -user cdlsupport -password wabisabi -scope 0 manag efiles -retrieve

You might also like