Embedded Processors and DSP Selection Guide 2012

www.analog.com/processors

Embedded Processors and DSP Selection Guide 2012

Obtaining Information
Worldwide Signal Processing and Development Tools Technical Support
Visit www.analog.com/support. In the United States and Canada, please call 800.ANALOGD (262.5643). For price, delivery, and samples, select option 3. Visit the EngineerZone technical support forum at EZ.analog.com.

Ordering Literature
Email [email protected]. Please call 800.ANALOGD (262.5643) and select option 2. In the United States and Canada, fax your literature request to 508.378.8440. We provide extensive embedded processing and DSP literature at www.analog.com/processors.

Contents
Introduction to ADI Processors ADI Embedded Processors Portfolio . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Markets and Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Technical Workshops and University Program. . . . . . . . . . . . . . . . . . 4 Online Training Visual Learning and Development . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Development Tools CROSSCORE Development Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 VisualDSP++ Integrated Development Environment . . . . . . . . . . . . . 8 Extended Development Tools Products . . . . . . . . . . . . . . . . . . . . . . . 12 CROSSCORE Development Tools Selection Table . . . . . . . . . . . . . . . 13 Software Modules for Blackfin and SHARC Processors. . . . . . . . . . . 14 Additional Support Third-Party Developer Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Platforms and Reference Designs . . . . . . . . . . . . . . . . . . . . . . . . . . 16 EngineerZone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Benchmarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Products and Selection Tables Blackfin Processor Family. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Blackfin Processor Family Selection Table . . . . . . . . . . . . . . . . . . . . 22 ADSP-BF592 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 ADSP-BF504/ADSP-BF504F/ADSP-BF506F . . . . . . . . . . . . . . . . . . . 27 ADSP-BF512/ADSP-BF514/ADSP-BF516/ADSP-BF518. . . . . . . . . . . 29 ADSP-BF522/ADSP-BF523/ADSP-BF524/ADSP-BF525/ ADSP-BF526/ADSP-BF527 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 ADSP-BF542/ADSP-BF544/ADSP-BF547/ADSP-BF548. . . . . . . . . . . 33 ADSP-BF538/ADSP-BF538F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 ADSP-BF536/ADSP-BF537 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 ADSP-BF534 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 ADSP-BF561 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 ADSP-BF531/ADSP-BF532 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 ADSP-BF533 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 ADSP-BF535 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SHARC Processor Family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 SHARC Processor Family Selection Table . . . . . . . . . . . . . . . . . . . . . 46 ADSP-21483/ADSP-21486/ADSP-21487/ADSP-21488/ ADSP-21489 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 ADSP-21478/ADSP-21479 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 ADSP-21469 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ADSP-21371/ADSP-21375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 ADSP-21367/ADSP-21368/ADSP-21369 . . . . . . . . . . . . . . . . . . . . . 55 ADSP-21366 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 ADSP-21363/ADSP-21364 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 ADSP-21266 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 ADSP-21262 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 ADSP-21261 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 ADSP-21161N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 ADSP-21160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 ADSP-21065L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 SigmaDSP Audio Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 SigmaDSP Product Selection Tables . . . . . . . . . . . . . . . . . . . . . . . . . 66 AD1940/AD1941 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 ADAU1401A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 ADAU1442/ADAU1445/ADAU1446 . . . . . . . . . . . . . . . . . . . . . . . . . . 69 ADAU1461 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 ADAU1701/ADAU1702 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 ADAU1761 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 ADAU1781 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 SigmaStudio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 SigmaDSP Evaluation Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 TigerSHARC Processor Family. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 TigerSHARC Processor Family Selection Table . . . . . . . . . . . . . . . . . 77 ADSP-TS203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 ADSP-TS202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 ADSP-TS201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 ADSP-TS101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

ADI Embedded Processors Portfolio

Analog Devices embedded architectures feature simple yet powerful programming models and are supported by high quality development tools.

SigmaDSP Audio Processors

SigmaDSP processors are fully programmable, single-chip audio DSPs that are easily configurable through the SigmaStudio graphical development tool, and are ideal for automotive and portable audio products. SigmaDSP chips are available with integrated sample rate converters, ADCs, DACs and output amplifiers. SigmaDSP Processors Are Ideal For: Portable audio applications Automotive audio systems Consumer audio applications

Blackfin Processors
High Performance, Low Power Processing Blackfin processors embody a new breed of embedded processors designed specifically to meet the computational demands and power constraints of todays embedded audio, video, and communications applications. Blackfin processors deliver breakthrough signal processing performance and power efficiency with a RISC programming model. Blackfin processors present high performance, homogeneous software targets that allow flexible resource allocation between hard real-time DSP tasks and nonreal-time control tasks. System control tasks can often run in the shadow of DSP and video tasks. Blackfin Processors Are Ideal For: Portable and networked digital media appliances Consumer communications and networks Automotive telematics, safety driver assistant, and infotainment Industrial instrumentation and medical equipment

TigerSHARC Processors
Highest Performance Multiprocessor Systems The TigerSHARC processor family offers the industrys highest performance per watt and per square inch of board space for the most demanding signal and image processing applications. Its patented link port technology allows glueless interprocessor communication within arrays of two or more TigerSHARC processors, delivering unbounded performance in terms of MMACS and MFLOPS. Based on a 128-bit static superscalar architecture, TigerSHARC processors offer native support of fixed- and floating-point data types and a balanced combination of computational performance, I/O bandwidth, and memory integration. Together, this yields sustained DSP system-level performance that is two to four times greater than conventional DSPs or microprocessors with vector processing units. By providing native support for 1-bit data formats used for chip-rate processing, TigerSHARC processors pioneer a new class of softwaredefined radios and serve applications that were previously the exclusive domain of expensive ASICs (application-specific integrated circuits) and FPGAs (field-programmable gate arrays). In addition, by moving to a software-centric design model, TigerSHARC processors allow IP reuse, which greatly enhances R&D productivity throughout each successive product generation. TigerSHARC Processors Are Ideal For: Wireless infrastructure WiMAX applications such as 802.16 and other advanced standards (e.g., OFDM), base stations, and softwaredefined radios Floating point, performance density related systems in both the single and multiprocessor environments Medical imaging equipment (e.g., CAT scan, ultrasound, and MRI) Military equipment (e.g., radar/sonar, munitions targeting, and optoelectronics) Industrial and instrumentation equipment Automated test equipment

SHARC Processors
Leadership in Floating-Point Applications SHARC processors offer exceptionally high floating-point DSP performance while integrating application-specific peripherals and interfaces designed to minimize overall system costs. The completely code-compatible family portfolio extends from entry-level products that are priced under $10 to high-end products providing 450 MHz/2.7 GFLOPS of signal processing performance. The broad range of price and performance points available in the SHARC processor family makes its members particularly well-suited to applications ranging from consumer, automotive, and professional audio to industrial and medical applications. All SHARC processors are based on a 32-bit Super Harvard Architecture that combines a high performance signal processing core with sophisticated memory and I/O processing subsystems. This balanced architecture enables unparalleled performance while ensuring that sufficient memory and I/O bandwidth are available for the most algorithmically challenging applications. In addition to these hardware-centric efficiencies, all SHARC processors offer a very flexible algorithm development environment by supporting a variety of fixed- and floating-point data types. The latest members of the SHARC family off load some of the most frequently used and intensive processing into hardware accelerators. An accelerator dedicated for filter processing can reduce the MIPS load on the core, freeing it up for other tasks. The FIR/IIR/FFT accelerator units are capable of performing the filters and FFT without core intervention. This gives software developers enormous freedom to use the core MIPS to implement complex algorithms, effectively adding more MIPS to the processor. SHARC Processors Are Ideal For: Home theater audio systems Professional audio systems Automotive audio systems Industrial and instrumentation equipment Medical imaging Telephony

Embedded Processors and DSP Selection Guide

Markets and Applications

Market Applications CT Diagnostic MRI Medical Patient Monitoring Portable Medical Ultrasound X-Ray Scanner Vending Machine ATE Test/ Measurement Equipment Communications Measurement Data Acquisition Factory Automation Industrial Control Machine Control Metering Motor Control Network Management Power Control Power Inverters Robotics Verification and Biometrics Video Surveillance Systems Vision Systems Military/Aerospace Guidance Aerospace Radar Sonar Control Entertainment Avionics Communications Military Digital Radio Location Military Imaging Radar/Sonar Smart Munitions Target Detection SHARC, TigerSHARC SHARC, TigerSHARC Blackfin Blackfin Blackfin, SHARC, TigerSHARC Blackfin, TigerSHARC Blackfin, SHARC, TigerSHARC Blackfin, TigerSHARC TigerSHARC SHARC, TigerSHARC TigerSHARC TigerSHARC Architecture/Platform Blackfin, SHARC, TigerSHARC Blackfin, SHARC, TigerSHARC SHARC, TigerSHARC Blackfin, SHARC, TigerSHARC Blackfin, SHARC Blackfin, SHARC, TigerSHARC SHARC, TigerSHARC Blackfin Blackfin Blackfin, SHARC, TigerSHARC Blackfin, SHARC, TigerSHARC Blackfin, SHARC, TigerSHARC Blackfin, SHARC Blackfin Blackfin, SHARC, TigerSHARC Blackfin Blackfin Blackfin Blackfin Blackfin Blackfin Blackfin, SHARC, TigerSHARC Blackfin Blackfin Blackfin

Market Communications

Applications Broadband Over Power Lines Digital Media Gateways (VOD) Home Networking IP PBX IP Set-Top Box Media Node Multimedia Over IP Video Conferencing/Phone Video Surveillance/Security Voice Over IP Access (Broadband) (i.e., 802.16 ...) Base Station Cellular Location Satellite Phone Handset Audio/Accessories Audio Amplifier Audio Jukebox Digital Radio Driver Assistance Handsfree Head Unit Multimedia Device Interface Navigation Occupancy/Classifications Premium Audio System Rear Seat Audio/Video

Architecture/Platform Blackfin Blackfin Blackfin Blackfin Blackfin Blackfin Blackfin Blackfin Blackfin Blackfin Blackfin, TigerSHARC TigerSHARC Blackfin Blackfin SigmaDSP SHARC, SigmaDSP Blackfin Blackfin Blackfin Blackfin Blackfin, SHARC, SigmaDSP Blackfin Blackfin, SigmaDSP Blackfin SHARC Blackfin, SigmaDSP

Industrial and Instrumentation

Broadband

Point of Sale

Wireless

Automotive

In Cabin

Industrial

Consumer Security Biometrics Blackfin, SHARC Video Surveillance Blackfin Digital Home Video Appliance Blackfin Digital Network Media Devices Blackfin Digital Radio Blackfin Digital Still Camera Blackfin, SigmaDSP Digital TV (Audio) Blackfin, SHARC, SigmaDSP Digital Video Camera Blackfin Digital Video Recorder Blackfin DVD/HD DVD/Blu-ray SHARC Home Server Blackfin, SHARC Home Theater A/V Receiver SHARC Wireless Headphones/Headsets Blackfin IP Set-Top Box Blackfin Networked A/V Receiver Blackfin Portable Media Player/ Blackfin, SigmaDSP Portable Entertainment Console Portable Navigation SigmaDSP Multimedia Accessories Blackfin, SigmaDSP Professional Audio/Broadcast SHARC Professional Audio/Music Products Blackfin, SHARC, SigmaDSP Prosumer Audio SHARC Satellite Radio Blackfin Interactive Toys Blackfin Video Game Console Blackfin

Entertainment

Toys

www.analog.com/processors

Technical Workshops and University Program

Technical Workshops
Cut your time to market by getting up to speed fast. The embedded processing and DSP system development and programming workshops provide comprehensive hands-on training on Analog Devices embedded processors and DSPs. The workshops are geared toward people who have a working knowledge of microprocessors and want to learn how to use Analog Devices embedded processors and DSPs. These courses cover the DSP architecture, assembly language syntax, I/O interface, hardware, and software development tools. Throughout the workshop, attendees learn how easy it is to use Analog Devices embedded processors and DSPs from lecture sessions and hands-on exercises. 1-Day Workshops and Seminars Workshops and seminars for those who want to evaluate the capabilities of ADI high performance embedded processors and development tools. Practical issues and concerns will be addressed in addition to the strengths and power of these devices. Multiday Workshops In-depth technical training designed to develop a strong working knowledge of embedded processors and development tools through lecture and hands-on exercises. Workshops are typically 3.5 days and presented by Kaztek Engineerings ADI-trained instructors. University Workshops These workshops are presented by ADIs worldwide university network and are taught by local university professors who are supported by Analog Devices embedded processor and DSP application teams. For more information and schedules, visit www.analog.com/processors/workshops.

ADI Embedded Processing and DSP University Program

The Analog Devices DSP University Program promotes embedded and digital signal processing education and research at engineering institutions worldwide. It provides the next generation of engineers with embedded processing and DSP knowledge to help them compete in the industry of tomorrow. Benefits of the ADI DSP University Program Lab recommendations Complete software and hardware tools to set up an embedded processor or DSP lab Discounts on development tools Discounts of up to 90% on hardware and software development tools Teaching resources
Sample lectures and labs

Discounts on ADI embedded processor and DSP workshops

In-depth, hands-on, 3.5-day training sessions

Analog Devices Technologies Are Ideally Suited for Teaching Embedded processor and DSP architectures that are the simplest in the industry to program Simple instruction sets High level of SRAM integration To learn more about the program and available discounts, visit www.analog.com/processors/university.

Embedded Processors and DSP Selection Guide

Online Training
Visual Learning and Development
Master the incredible potential of the Blackfin, SHARC, and SigmaDSP processors and build better applications. Discover how without ever leaving your desk by taking one of the new Blackfin, SHARC, or SigmaDSP online training modules. The modules cover a wide range of topics that address different stages of your development cycle from the fundamentals of Analog Devices development tools to tips on how developers can optimize their system performance. These modules are designed to be used independently or in combination, depending on the experience and interest of the viewer. Processors in Portable Healthcare This 15-minute module provides an overview of the evolving trends and requirements within select portable healthcare applications, mainly EKG, ECG, and AEG. It features the Blackfin processor portfolio and highlights the solutions it helps customers achieve when designing solutions for these applications. A key development partner is also featured. Getting Started Highlights of New SHARC Processor Families This module highlights the industry-leading features of the new SHARC floating-point processor families, including fastest industry performance, lower price point, 5 Mb on-chip memory, and low power consumption. Introduction to the SHARC EZ-KIT Lite Products (ADSP-2147x and ADSP-2148x) Get your new SHARC processor design started quickly by familiarizing yourself with the capabilities of the EZ-Kit Lite evaluation/development platform. Three example applications are demonstrated that leverage ADIs broad library of downloadable algorithms and software code modules. SHARC ADSP-21469 EZ-KIT Lite Overview This 3-minute video features an overview of the new SHARC ADSP-21469 EZ-KIT Lite evaluation platform. It provides an in-depth review of the EZ-KIT contents, including cables and development tools, and it also provides a detailed overview of the development board layout and functionality. SHARC Processor Overview This 46-minute engineer-to-engineer session provides an overview of the SHARC processor family. During this module, you will find information on the value the SHARC architecture brings to a variety of applications. This presentation will not go into deep technical details but will cover the architecture of the SHARC at a fairly high level. You will also be provided with information about available hardware and software development tools from Analog Devices to assist with product development. SHARC ADSP-2146x Overview This 60-minute module provides an overview of the SHARC ADSP-2146x processors, the newest members of the SHARC processor family. It provides an in-depth look at the key features of the ADSP-2146x family, such as variable instruction size execution, DDR2 DRAM controller, thermal diode, and media local bus interface. Recommended viewing if this is the users first look at the SHARC processor family. ADZS-ICE-100B Blackfin JTAG Emulator Overview This 2-minute video provides an overview of the new ADZS-ICE-100B JTAG emulator for the Blackfin processor family, including a review of key features and functionality as well as ordering information. Blackfin ADSP-BF506F EZ-KIT Lite Overview This 3.5-minute video features an overview of the new Blackfin ADSP-BF506F EZ-KIT Lite evaluation platform. It provides an in-depth review of the EZ-KIT contents, including cables and development tools. It also provides a detailed overview of the development board layout and functionality.

Video Training Modules

ADI in Applications New SHARC Processors for HD Audio Applications Overview of ADIs new 400 MHz SHARC ADSP-2148x series processors for HD audio and home theater applications. Renowned in the pro audio market for enabling exquisite sound quality and advanced digital effects, this video highlights how SHARC-caliber processing can now be applied to consumer AVR systems requiring low cost, single-chip implementations. New SHARC Processors for Healthcare Applications ADIs new low power SHARC ADSP-2147x floating-point processor brings portability to sophisticated medical instrumentation. This overview highlights how the SHARC ADSP-2147x series optimizes power budgetsensitive portable medical system design ranging from medical imaging equipment to patient monitoring devices. New SHARC Processors for Industrial Applications ADIs new 400 MHz SHARC ADSP-2148x processor series brings high performance native floating-point processing to a new cost point for products in test and measurement, renewable energy, motor control, and smart grid applications. Processors in Test, Measurement, and Control This 43-minute engineer-to-engineer session provides an overview of the test measurement and control (TM&C) market, specifically geared towards the value of programmable processors. During this module, you will find information on Analog Devices processor families and the value each of the architectures brings into the four categorized markets. Besides processor value, this training module contains highlights of different applications where these processors have been and continue to be used. Finally, a highlight on some partners and the value they bring into the market and how these are helpful when deploying a solution on TM&C. ADI Solutions for Video Surveillance Equipment This 50-minute module provides an overview of Analog Devices products and solutions, including the Blackfin processor, for various video surveillance applications in the security market. Signal chain overviews of the broad ADI portfolio, as well as key partners, are included.

www.analog.com/processors

Online Training

Blackfin Core Architecture This module introduces the Blackfin family, which includes the Blackfin processors, tools, and other development support that is available. Introduction to VisualDSP++ Tools This module will give the user an overview of the VisualDSP++ Tools. For demonstration purposes, the ADSP-BF537 EZ-KIT Lite will be used as the target. Users will learn some quick tips on how to analyze and fine tune their applications. Basics of Building a Blackfin Application This module describes the basic software build process of VisualDSP++, specific Blackfin programming gotchas, and basic code optimization strategies. Users will see an example demonstrating zero effort optimization by using built-in optimizer and cache. Interfacing Blackfin with Audio and Video Peripherals This module will familiarize the user with the principles behind connecting Blackfin processors to audio and video devices. It is recommended that users have some basic working knowledge of audio and video fundamentals. Introduction to VDK This 27-minute module provides an overview of the VisualDSP++ kernel. A demonstration shows the basics of building and debugging VDK projects. Users should have previous experience with operating systems, as well as a basic knowledge of software terminology. Multimedia Starter Kit This 52-minute module introduces the Multimedia Starter Kit. A demonstration covers JPEG and MJPEG. Users should have previous experience with embedded systems, basic knowledge of software terminology, and familiarity with VisualDSP++, Blackfin processors, and ADI evaluation boards. Developing on ADI Processors Lockbox Secure Technology on Blackfin Processors This module focuses on the highlights of Lockbox technology on Blackfin processors. Blackfin Optimizations for Performance and Power Consumption This module is about optimizing your software design for the Blackfin processor for better performance and lower power consumption.

Blackfin System Services This module discusses the system services software available for Blackfin processors. It is recommended that users have some understanding of the Blackfin architecture, basic knowledge of software terminology, and experience in embedded systems. Blackfin Device Drivers This module discusses the device driver model for the Blackfin family of processors. It is recommended that users have an understanding of the Blackfin architecture and are familiar with the Blackfin system services software. Rapid Development of a Blackfin-Based Video Application This module discusses the rapid development process of a Blackfin video application using readily available and fully supported software and hardware modules. It is recommended that users understand the basic knowledge of software terminology, have experience in embedded systems, and understand Blackfin systems services and device drivers. Using System Services Library and Device Drivers with VisualDSP++ Kernel in Blackfin Applications This 50-minute module walks through the development of a Blackfin project that uses the system services library and device drivers (SSL/DD) in conjunction with the VisualDSP++ Kernel (VDK). Advanced Topics Programming and Optimizing C Code on Blackfin Processors This module introduces concepts, tools, and approaches to optimizing Blackfin C applications. It highlights the problems and opportunities that can lead to potential performance improvements and reviews the available tools/techniques. The module covers a wide range from automatic optimization to detailed rewriting of C expressions. Performance Tuning on the Blackfin Processor This module discusses the techniques users can use to tune system performance for Blackfin processors. Users should have some understanding of the Blackfin architecture, a basic knowledge of software terminology, and experience in embedded systems. New modules are in development. To view the latest modules available or take a training module, visit www.analog.com/VLD. SigmaStudio Training SigmaStudio training videos are available on ADIs video channel. These include many short courses on specific features, as well as tips for getting the most out of the tool and quickly developing a signal flow for your application.

Embedded Processors and DSP Selection Guide

Development Tools: CROSSCORE

Analog Devices CROSSCORE development tools are focused on providing easier and more robust methods for engineers to develop and optimize systems by shortening product development cycles to reduce time to market. VisualDSP++ development environment EZ-KIT Lite evaluation kits EZ-Extender daughter boards Emulators EZ-Board evaluation board Debug agent board

Emulators
Analog Devices cost-effective and high performance emulators provide an easy, portable, nonintrusive, target-based debugging solution for Analog Devices JTAG processors and DSPs. These powerful emulators perform a wide range of emulation functions, including single-step and full speed execution with predefined breakpoints, and viewing and/or altering of register and memory contents. See the Development Tools Table on Page 13 for available tools for Blackfin and SHARC processors.

EZ-Board Evaluation Boards

The EZ-Board evaluation board provides developers with a low cost platform for initial evaluation of the processors via an external emulator or Clinux. The EZ-Board has an expansion interface that allows for modularity with different expansion board types with and without debug agents. The interface also provides a solution to user defined pins reserved for specific processor types and EZ-KIT Lite evaluation kits, multifunction pins, signal terminations, buffering, timing, and interface guidelines.

VisualDSP++ Integrated Development Environment

VisualDSP++ is an easy-to-install, easy to use, integrated software development and debugging environment (IDDE). More in-depth information is available on Page 10.

EZ-KIT Lite Evaluation Kit

These systems consist of a standalone evaluation board and an evaluation suite of VisualDSP++ to facilitate architecture evaluations via a PC-hosted tool set. Users can evaluate ADIs processors, learn about digital signal processing applications, as well as simulate, debug, and prototype applications.

Debug Agent Board

The standalone debug agent is intended to provide a modular low cost emulation solution for EZ-Board evaluation boards as well as evaluation boards designed by third parties. The standalone debug agent is very similar to the debug agent that is on existing EZ-KIT Lite evaluation kits but has the flexibility to move from one board to another board.

EZ-Extender Daughter Boards

EZ-Extender daughter boards give developers access to and the ability to connect to various peripherals from Analog Devices and third parties via the expansion interface of the EZ-KIT Lite evaluation kits.

www.analog.com/processors

VisualDSP++
Features

Integrated Development Environment

VisualDSP++ Development and Debugging Environment
VisualDSP++ is a state-of-the-art software development environment targeting the Analog Devices embedded processor portfolio. With the embedded software engineer and signal-processing-intensive applications specifically in mind, VisualDSP++, coupled with Analog Devices in-circuit emulator (ICE) and EZ-KIT Lite evaluation products, provides best-in-class capabilities for developing demanding real-time applications.

Integrated Development and Debugging Environment Supports all Analog Devices processors and DSPs Multiple project management Profiling and tracing of instruction execution Automation API and automation aware scripting engine Multiple processor support Background telemetry channel (BTC) support with data streaming capability Statistical profiling Graphical plotting capabilities Cache visualization Execution pipeline viewer Compiled simulation Efficient Application Code Generation Native C/C++ compiler and enhanced assembler Profile guided optimization (PGO) Expert linker with profiling capability Integrated source code control TCP/IP and USP support for Blackfin processors Processor configuration/start-up code wizard for Blackfin processors VisualDSP++ Kernel (VDK) with multiprocessor messaging capability System services and device driver support for Blackfin processors File system support for Blackfin processors Platform and Processor Support VisualDSP++ Release 5.0 supports Analog Devices Blackfin processor, TigerSHARC processor, and SHARC processor families. Windows XP, Windows 2000, and Windows Vista hosts are supported. Description VisualDSP++ Test Drive 90-day free trial Part Number VDSP-BLKFN-PC-TEST VDSP-TS-PC-TEST VDSP-SHARC-PC-TEST

VisualDSP++ interface.

Develop High Performance Applications Quickly

At the heart of VisualDSP++ is a robust and powerful C/C++ compiler. The compiler consistently delivers industry-leading performance on standard benchmarks, ensuring that all but the most performancedemanding applications can be written entirely in the C language, accelerating development time while maintaining a portable code base. The compiler is backed by a rich library of signal-processing routines, allowing easy access to hand-coded, optimized implementations of FFTs, FIRs, etc. The Blackfin and SHARC compilers support MISRA-C:2004 for safety-critical embedded systems (www.misra-c.com). The ANSI-C compiler is also augmented with popular language extensions and enhancements to make it more amiable to existing code bases. Examples include GNU GCC extensions, ETSI fractional libraries, and multiple heap support. A compilers first job is to produce correct code, so there are occasions when the compiler must take a conservative approach to a code sequence when a more aggressive approach should have been taken if certain constraints were guaranteed by the programmer. The VisualDSP++ compiler supports a broad range of pragma that allows the programmer to better exploit the compiler while maintaining C language neutrality. Just as important, the compiler has the ability to feed back advisory information to the programmer, offering further improvements to a code sequence should the programmer be able to make certain guarantees about it. This information is displayed seamlessly in the VisualDSP++ main editor window. This lifts the veil off the black box that compilers are often, and accurately, accused of being.

Embedded Processors and DSP Selection Guide

VisualDSP++

Integrated Development Environment

Built upon the system service library, the file system service (FSS) provides a portable and extensible means of accessing mass storage media from the Blackfin processor. Support for the ADSP-BF548 EZ-KIT Lite development board is provided with VisualDSP++ 5.0 for FAT file systems on the attached hard disk drive, supplied SD card, and USB flash. As embedded applications become increasingly part of the connected world, the ability to rapidly add reliable Ethernet or USB connectivity to an application can often make or break a development schedule. For Blackfin processors, VisualDSP++ includes a tuned port of the open-source LwIP TCP/IP stack. An example application showcasing an embedded Web server is among the highlights of this support. For Blackfin processors and SHARC processors, USB 2.0 device connectivity is provided. Bulk and asynchronous transfer modes are supported out of the box, with USB-IF logo certified embedded and host applications provided with full source code.

Backing the compiler is a powerful assembler and linker technology. Analog Devices processors are noted for their intuitive algebraic assembly language syntax, and the VisualDSP++ assembler extends that ease of use with the ability to import C header files, allowing for symbolic references into arbitrarily complex C data structures. Binary data can be included directly into assembly source files, creating an easy way to add blocks of static data (such as audio samples and bitmaps) to an application. The VisualDSP++ linker is fully multicore and multiprocessor (MP) aware, allowing for the creation of cross-linked, multiexecutable applications in a single pass. Other powerful capabilities of the linker include dead code and data elimination, code and data overlays, section spilling (i.e., automatic overflow from internal to external memory), and automatic short-to-long call expansion.

Leverage Proven Application Infrastructure

VisualDSP++ goes beyond robust code generation tools, providing considerable application infrastructure and middleware out-of-thebox to speed application development. The VisualDSP++ Kernel (VDK) is a robust, royalty-free real-time operating system (RTOS) kernel. It provides essential kernel features in a minimal footprint. Features include a fully pre-emptive scheduler (time slicing and cooperative scheduling are also supported), thread creation, semaphores, interrupt management, inter-thread messaging, events, and memory management (memory pools and multiple heaps). In MP environments, MP messaging is also provided. Configuration of these elements is done graphically, with code wizards to speed the creation of new threads and interrupt handlers. VDK has been available for multiple releases of VisualDSP++ and is now a key component of products shipping from a number of high volume vendors. Several commercial RTOSs are also available from select Analog Devices third parties. Blackfin processors can take advantage of the system service library (SSL), which provides consistent, easy C language access to Blackfin features such as the interrupt manager, direct memory access (DMA), and power management units. Clock frequency and voltage can be changed easily at run time through a set of simple APIs. Interrupt handling can be live, fired at the time of the event, or deferred to a later time of the applications choosing. A device manager integrates device drivers for on- and off-chip peripherals. VisualDSP++ includes ever expanding device driver support for all on-chip peripherals and off-chip devices found on Analog Devices EZ-KIT Lite and EZ-Extender products. The SSL is OS-neutral and can be run as a standalone or in conjunction with an RTOS.

Source code generation.

Wrapping all of these powerful tools and libraries is the VisualDSP++ state-of-the-art integrated development and debugging environment (IDDE). The IDDE includes full-featured editing and project management tools, with incremental builds, multiple build configurations (debug and release, for example), syntax-coloring editor, and many other code editing features. Makefiles can be imported and exported freely. For Blackfin processors, many application attributes can be configured graphically, enabling pointand-click access to SDRAM setup, stack and heap placement, power management, clock speed, cache setup, and more.

Debug and Tune Your Application with Ease

The ability to develop a high performance application is often gated by the visibility into the running system that your debugger provides. VisualDSP++ excels in this regard, with best-in-class debugging and inspection support. Robust fundamental C language source debugging (source level stepping and breakpoints, stack unwinds, local variable and C expression support, memory and register windows) serves as a foundation upon which multiple innovative and unique tools rest.

www.analog.com/processors

VisualDSP++

Integrated Development Environment

VisualDSP++ supports a variety of debugging targets. Most common is a JTAG connection to an EZ-KIT Lite board or to a custom target board by means of Analog Devices emulator products. However, there will be occasions where closer inspection in a simulated environment may be required. VisualDSP++ provides core cycle-accurate simulators, allowing inspection of every nuance of activity within the processor, including visualization of the processors pipeline and cache. These simulators are robust and highly accurate, so much so that they are used by Analog Devices own silicon designers for validation. A second simulator is available to Blackfin processor usersa high speed functional simulator. Using proprietary just-in-time (JIT) technology, the simulators have the ability to simulate millions of cycles per second on the most modest of host PCs. Effectively, this means that what used to be an overnight run is now a 10-minute coffee break, and what was once a coffee break is now a near instantaneous simulation. As many of the most performance-demanding applications process a signal of some sort, comprehensive memory plotting is a cornerstone of VisualDSP++ debugger support. VisualDSP++ provides multiple views, from basic (line plots) to sophisticated (eye diagrams and waterfalls), to pinpoint anomalous data sequences in your application. Image viewing in a number of data formats is also available.

Kernel event history.

For Blackfin processors and SHARC processors, inspection, or even application stimulation, from the debugger at run time is possible through the use of the processors background telemetry channel (BTC). BTC allows for an arbitrary number of communication channels to be established between the host debugger and application. Channels may go in either direction, so BTC can be used to read and write data as the processor runs. Scalar values or entire arrays may be serviced by a channel. Arrays read from the target can even be plotted in real time. MP users get the same compelling set of debugging features across all processors, unified into a single debugging interface. Individual windows can be made to float their focus to whichever processor currently is the debuggers focus, or they can be pinned to a specific processor so their contents do not follow the debuggers focus. To further aid MP debug, synchronous run, step, halt, and reset are also provided. The Analog Devices patented statistical profiler offers unprecedented and unique visibility into a running application. Operating completely nonintrusively to the application, the application is polled thousands of times per second, and a statistical view of where an application is spending the majority of its time is quickly assembled. This tool can be used to easily inspect an application for unexpected hotspots (suggesting the need to move a key routine from external to internal memory, for example). Simulator targets provide a completely linear profiling view. For Blackfin processors, traditional instrumented profiling is also available. Going even further, the VisualDSP++ compiler is able to act upon profiling information. Profile-guided optimization (PGO) is a technique that allows the compiler to instrument an application, run the application, and then make a second-pass compilation, exploiting the information that was gathered during the run of the application. This gives the compiler unique insight on a block-by-block basis, allowing it to optimize with a level of granularity that is not possible with a tool that operates only a file-by-file basis.

Comprehensive memory plotting.

Users of the VDK get unparalleled visibility into the internals of the kernel. Status on a per-thread basis is available, as is a comprehensive pictorial history of kernel events and CPU loading. Thread changes, posted and pended semaphores, and other kernel events are captured in this display.

10

Embedded Processors and DSP Selection Guide

VisualDSP++

Integrated Development Environment

Integrate into Your Existing Environment
A development tool suite is always a part of an organizations larger software engineering environment. VisualDSP++ has been designed to operate in a larger environment. Since an embedded engineer is often developing on a new platform while maintaining existing products that were likely developed with an earlier version of the tools, VisualDSP++ can be installed discretely an arbitrary number of times at a variety of release levels, allowing engineering to easily switch between current and legacy versions of VisualDSP++. To better integrate to source code control (SCC) systems, VisualDSP++ is able to connect to any SCC provider that supports the Microsoft Common Source Code Control (MCSCC) interface. This interface is supported by all leading SCC vendors. VisualDSP++ goes one step further by supporting the control of VisualDSP++ itself within a source code control system. The ability to robustly test an embedded application is enabled through a comprehensive automation application programmers interface (API). Using Microsofts language-neutral automation technology, nearly every feature of the graphical environment is available to script authors. Applications can be rebuilt, downloaded, and run from a simple script executed from the command-line or from within a custom test harness framework. The automation API is supported by C++ and VBScript examples for all API calls, though any automation-aware language can be used. For prototype runs and/or small volume deployment, an Analog Devices emulator can be used to flash a program onto your custom system. Accessible through the automation API, the flash programmer can be scripted, making it possible to develop a turnkey user interface for use by a production floor technician or other individual not familiar with VisualDSP++. Device drivers are provided for all flash devices found on EZ-KIT Lite products, and these drivers are easily adjusted to support an arbitrary flash device. The standalone flash programmer enables the development engineer to script or automate this process with a license-free tool, allowing the manufacturing technician to repeatedly program any number of boards prior to major production. To download a test drive, visit www.analog.com/testdrive.

www.analog.com/processors

11

Development Tools

Extended Development Tools Products

In addition to CROSSCORE development tools, there are a variety of starter kits, hardware, and software available. Starter Kitprovides everything needed to get started on an application. Starter kits contain a Blackfin EZ-KIT Lite, EZ-Extender daughter board(s), and the Software Development Kit (SDK), which contains sample code, how to documents, and various encoders/decoders that make getting started on an application easy and shortens the learning curve. Software Development Kits (SDK) contains example software, source code, device drivers, algorithms, utilities information, and application notes that allow you to develop processor applications. The software can be used as a framework, or as examples of how to use certain aspects and peripherals, in conjunction with an ADI processor. The SDK is included in the starter kits and is also available for free download, provided you have the required hardware, at www.analog.com/SDK/downloads. Multimedia Starter Kit provides everything you need to get started on a multimedia application. Using a Blackfin EZ-KIT Lite and EZ-Extenders daughter board(s) to perform multimedia related tasks, learn how to render/capture video and audio streams using various off the shelf multimedia devices. As well, the SDK contains source code, how to documents, and various encoders/decoders that make getting started easy and shorten the learning curve. Media Player Starter Kitprovides everything you need to get started on a media player application using a Blackfin EZ-KIT Lite and included software to perform audio and graphic related tasks. Learn how to render audio contents and images to the on-board peripherals from the on-board storage devices such as the hard drive and memory sticks. The SDK contains source code, how to documents, and various decoders that make getting started easy and shorten the learning curve. Clinux is an open-source OS that has gained significant attention and popularity over the past few years. There are several advantages to having open-source tools available for the Blackfin processor: source code availability, royalty-free licenses, reliability, community support, tools availability, networking support, portability, and an extensive application base. Developers have the opportunity to develop even the most demanding feature-rich applications in a very short time frame and can leverage the work of others in the community. The Clinux kernel and GNU toolchain have been ported to the Blackfin processor and are both available for download from the Clinux website. This website (www.blackfin.uclinux.org) is the central repository for all open-source Blackfin projects. Examples of current Blackfin projects are: GNU Toolchain for Blackfin (gcc 3.x), Uboot for the Blackfin Processor, CoLinux Port of Blackfin Tools, Clinux for Blackfin Documentation, JTAG Tools for Blackfin, Networked Audio Media Node, and Networked Oscilloscope. One of the board support packages is the ADSP-BF537 STAMP Clinux Kernel board support package (BSP). The STAMP board has been specifically designed to support the development and porting of open-source Clinux applications and includes the full complement of memory along with serial and network interfaces. A variety of daughter cards that plug into this board are also available. Go to www.blackfin.uclinux.org for the most current open-source hardware and software information for the Blackfin processor.

12

Embedded Processors and DSP Selection Guide

CROSSCORE Development Tools Selection Table

Processor Blackfin Processors ADSP-BF592 ADSP-BF504 ADSP-BF504F ADSP-BF506F ADSP-BF512/ADSP-BF512F ADSP-BF514/ADSP-BF514F ADSP-BF516/ADSP-BF516F ADSP-BF518/ADSP-BF518F ADSP-BF522/ADSP-BF522C ADSP-BF524/ADSP-BF524C ADSP-BF526/ADSP-BF526C Hardware ADZS-BF592-EZLITE ADZS-BF506F-EZLITE ADZS-BF518F-EZLITE ADZS-BF518F-EZBRD ADZS-DBGAGENT-BRD ADZS-BFLLCD-EZEXT ADZS-BLUET-EZEXT ADZS-BFSHUSB-EZEXT ADZS-BF526-EZLITE ADZS-BF526-EZBRD ADZS-BFLLCD-EZEXT ADZS-DBGAGENT-BRD ADZS-BLUET-EZEXT ADZS-BFSHUSB-EZEXT ADZS-BF527-EZLITE ADZS-BF527-MPSKIT ADZS-BFAV-EZEXT ADZS-BFFPGA-EZEXT ADZS-BF533-EZLITE ADZS-BF-EZEXT-1 ADZS-BFAV-EZEXT ADZS-USBLAN-EZEXT ADZS-BFAUDIO-EZEXT ADZS-BFFPGA-EZEXT ADZS-BF533-MMSKIT ADZS-BF537-EZLITE ADZS-BFAV-EZEXT ADZS-BLUET-EZEXT ADZS-USBLAN-EZEXT ADZS-BFAUDIO-EZEXT ADZS-BFFPGA-EZEXT ADZS-BF537-STAMP ADZS-BFLLCD-EZEXT ADZS-BF538F-EZLITE ADZS-BFLLCD-EZEXT ADZS-BF548-EZLITE ADZS-BF548-MPSKIT ADZS-BLUET-EZEXT ADZS-BFAV-EZEXT ADZS-BFFPGA-EZEXT ADZS-BFLLCD-EZEXT ADZS-BF561-EZLITE ADZS-BF561-MMSKIT ADZS-21262-EZLITE ADZS-21262-1-EZEXT ADZS-SHRCUSB-EZEXT ADZS-21364-EZLITE ADZS-SHRCUSB-EZEXT ADZS-21369-EZLITE ADZS-SHRCUSB-EZEXT ADZS-21371-EZLITE ADZS-21375-EZLITE ADZS-21469-EZLITE ADZS-21469-EZBRD ADZS-DBAGENT-BRD ADZS-SHAUDIO-EZEXT ADZS-BFSHUSB-EZEXT ADZS-21479-EZLITE ADZS-21479-EZBRD ADZS-DBAGENT-BRD ADZS-BFSHUSB-EZEXT ADZS-21489-EZLITE ADZS-21489-EZBRD ADZS-DBAGENT-BRD ADZS-BFSHUSB-EZEXT ADZS-TS201S-EZLITE ADZS-USB-ICE ADZS-HPUSB-ICE VDSP-TS-PC-TEST VDSP-TS-PC-FULL VDSP-TS-PCFLOAT VDSP-TS-PCFLT-5 Mathworks (Not available on the ADSP-TS101) ADZS-USB-ICE ADZS-HPUSB-ICE VDSP-SHARC-PC-TEST VDSP-SHARC-PC-FULL VDSP-SHARC-PCFLOAT VDSP-SHARC-PCFLT-5 Emulator ADZS-ICE-100B ADZS-USB-ICE ADZS-HPUSB-ICE VisualDSP++ Development Software VDSP-BLKFN-PC-TEST VDSP-BLKFN-PC-FULL VDSP-BLKFN-PCFLOAT VDSP-BLKFN-PCFLT-5 Software Development Kit (SDK) (ADSP-BF527, ADSP-BF533, ADSP-BF537, ADSP-BF548, ADSP-BF561 only) Mathworks (ADSP-BF531, ADSP-BF532, ADSP-BF533, ADSP-BF534, ADSP-BF536, ADSP-BF537, ADSP-BF538, and ADSP-BF539 only) Clinux Kernel + GNU Software (All parts except the ADSP-BF535 and ADSP-BF50x family) Microsoft.Net (Available on ADSP-BF527 only) Additional Software Available

ADSP-BF523/ADSP-BF523C ADSP-BF525/ADSP-BF525C ADSP-BF527/ADSP-BF527C ADSP-BF531 ADSP-BF532 ADSP-BF533

ADSP-BF535 ADSP-BF534 ADSP-BF536 ADSP-BF537

ADSP-BF538/ADSP-BF538F ADSP-BF542 ADSP-BF544 ADSP-BF547 ADSP-BF548 ADSP-BF561 SHARC Processors ADSP-21160M ADSP-21160N ADSP-21161N ADSP-21261 ADSP-21262 ADSP-21266 ADSP-21363 ADSP-21364 ADSP-21366 ADSP-21368 ADSP-21369 ADSP-21371 ADSP-21375 ADSP-21467 ADSP-21469

Mathworks (ADSP-21363, ADSP-21364, ADSP-21366, ADSP-21367, ADSP-21368, and ADSP-21369 only)

ADSP-21478 ADSP-21479 ADSP-21483 ADSP-21486 ADSP-21487 ADSP-21488 ADSP-21489 TigerSHARC Processors ADSP-TS101 ADSP-TS201 ADSP-TS202 ADSP-TS203

www.analog.com/processors

13

Software Modules for Blackfin and SHARC Processors

Overview
Analog Devices (ADI) software modules are a series of popular audio and video algorithms for Blackfin processor-based designs and a series of SHARC processors. The highly optimized software modules allow you to quickly and easily incorporate these multimedia functions, providing a fast development path to the end product. The software modules feature a consistent API to ensure rapid integration of multiple software algorithms. Developed internally by ADI, these software module implementations are provided free to Blackfin and SHARC processor software programmers. New and revised modules and their supported processors are added frequently. For the latest information on software modules go to www.analog.com/BlackfinModules and www.analog.com/SHARCModules.

Worldwide Support
Each software module includes a detailed product reference guide and demonstration code to get you started. Online information for each module is available on ADIs website, www.analog.com/BlackfinModules and www.analog.com/SHARCModules. Additional support for designers and programmers is available by visiting www.analog.com/support. Support for system integration is available through ADI third parties.

Features
Free implementation of multimedia and other popular algorithms Most available as production downloadable code from the Web Modules developed directly by Analog Devices Highly optimized coded by ADI processor experts Consistent API (application programming interface) and framework across all modules Demonstration applications provided Uses ADI development tools Runs on the latest revision of VisualDSP++ Support for Blackfin and SHARC processors

Hardware Requirements
The software modules run on ADI EZ-KIT Lite evaluation boards and EZ-Extender daughter boards or on custom boards with supported processors.

Availability and Licensing

Each module supports ADI Blackfin and SHARC processors and is a licensed product that is available in object code format.

Each Software Module Includes

Library module with a standard C-callable API consistent with other code modules Reference C source code interface routine that calls the code as a single library module Demonstration software for execution on ADI evaluation boards Documentation, including application notes and detailed developers guides

Licensing restrictions for Dolby, DTS, and Microsoft

The customer must be a licensee for Dolby DTS SRS or Microsoft , , , before production code can be shipped for that particular algorithm. Dolby, DTS, SRS and Microsoft modules have been certified on specific processors.

14

Embedded Processors and DSP Selection Guide

Software Modules for Blackfin and SHARC Processors

Blackfin Processor Software Modules

Software Adaptive Jitter Buffer Asynchronous Sample Rate Converter (ASRC) Audio Mixer Bit Stream Detector (for S/PDIF) Blackfin Image Processing Toolbox Blackfin 2D Graphics Library (BF2DGL) Dolby Digital (AC-3) 5.1 Decoder Dolby Digital (AC-3) Consumer Encoder Dolby Digital EX Decoder Dolby Headphone v2 Dolby Pro Logic IIx Dolby Virtual Speaker (DVS) DTS 5.1 Decoder DTS Neo:6 Dual Tone Multifrequency (DTMF) Decoder Dual Tone Multifrequency (DTMF) Generator Enhanced Video Post Processing (eVPP) G.711 Appendix I Voice Codec with PLC G.723.1A Voice Codec G.729AB Voice Codec H.264 BP Decoder H.264 BP Encoder H.264 BP/MP Encoder JPEG Decoder JPEG Encoder MP3 Decoder (with Layer 1 and 2 support) MP3 Encoder MPEG-2 Video Decoder MPEG-4 AAC-BSAC Decoder MPEG-4 AAC-LC Decoder MPEG-4 HE-AAC v2 Decoder (with DAB+ and DRM support) MPEG-4 HE-AAC v2 Encoder MPEG-4 SP/ASP Decoder Library MPEG-4 Simple Profile and Advanced Simple Profile Video Encoder Multiband Graphic Equalizer Ogg Vorbis Decoder RTP/RTCP Signal Tone Detector with Modem/Fax Passthrough Signal Tone Generator Video Analytics Toolbox Windows Media Audio (WMA9) Standard Decoder Windows Media Audio (WMA9) Standard Encoder Windows Media Video (WMV9) Standard Decoder MPEG-2 Video Encoder Multimedia Format Processing Library WAV PCM Utilities Type Telephony/VoIP Audio Postdecoder Telephony/VoIP Audio Preprocessor Image/Video Processing Primitives Graphics Engine Audio Decoders and Postdecoders Audio Encoders Audio Decoder Audio Decoders and Postdecoders Audio Decoders and Postdecoders Audio Decoders and Postdecoders Audio Decoders and Postdecoders Audio Decoders and Postdecoders Telephony/VoIP Telephony/VoIP Video Postprocessor Voice Codec Voice Codec Voice Codec Video/Imaging Decoder Video Encoder Video Encoder Imaging Decoder Imaging Encoder Audio Decoders and Postdecoders Audio Encoder Video/Imaging Decoder Audio Decoders and Postdecoders Audio Decoder Audio Decoders and Postdecoders Audio Encoders Audio Decoders and Postdecoders Video Encoder Audio Postdecoder Audio Decoder Telephony/VoIP Telephony/VoIP Telephony/VoIP Video/Imaging Postprocessors Audio Decoders and Postdecoders Audio Encoders Video/Imaging Decoder Video Encoders AV Format Parser Audio Decoders and Post Decoders

SHARC Processor Software Modules

Software Asynchronous Sample Rate Converter (ASRC) Dolby Advanced Fader Dolby Intelligent Mixer (eMix) Dolby Digital (AC-3) 5.1 Decoder Dolby Digital EX Decoder Dolby Headphone (DH) v2 Dolby Pro Logic IIx Dolby Virtual Speaker DTS 5.1 Decoder DTS Neo:6 Matrix Decoder Dolby Volume MPEG-4 AAC-LC Decoder Neural Surround Decoder Type Audio Postdecoders Audio Decoders and Postdecoders Audio Decoders and Postdecoders Audio Decoders and Postdecoders Audio Decoder Audio Decoders and Postdecoders Audio Decoders and Postdecoders Audio Decoders and Postdecoders Audio Decoders and Postdecoders Audio Decoders and Postdecoders Audio Decoders and Post Decoders Audio Decoder Audio Decoders and Post Decoders

New modules are frequently being added. Visit www.analog.com/BlackfinModules and www.analog.com/SHARCModules for the latest listing.

www.analog.com/processors

15

Additional Support
Third-Party Developers Program for Embedded Processor and DSP Applications`
Find a Third Party to Help You Get Your Design to Market Faster Analog Devices Third Party Developers network consists of companies all over the world that provide hardware products, software products, algorithms, and design services for a wide variety of applications and markets. The third party search on our website allows you to quickly find the third parties that offer services for our Embedded Processors and DSPs. The interface allows you to easily filter our third party network by ADI processor(s) supported, offerings, regions supported, and markets and applications supported. You can also perform a keyword search of all the third party listings. Visit the new Embedded Processing and DSP Third Party Search at www.analog.com/3rdparty. Become an Analog Devices Third Party Developer at www.analog.com/join-thirdpartynetwork.

Platforms and Reference Designs

Platforms and reference designs help jump-start your design. They include comprehensive software suites with documented APIs running on application-specific evaluation boards. The easy to use APIs enable customization and control of core system functions, letting you focus on adding value through product differentiation. For more information on Analog Devices platforms, reference designs, and third-party reference designs, visit www.analog.com/software.

EngineerZone A Technical Support Forum from Analog Devices

Where DSP Engineers Go for the Right Answers EngineerZone is a new online technical support forum that provides direct access to DSP technical support engineers. Features Search FAQs and technical information to get quick answers to your embedded processing and DSP design questions Connect with other DSP developers who face similar design challenges Share knowledge and collaborate with the ADI support team and your peers in this open forum Join the forum at EZ.analog.com.

16

Embedded Processors and DSP Selection Guide

Benchmarks

Comparing Processors
To truly assess a processors performance, you have to look beyond MHz, MIPS, or MFLOPS. There are many attributes that may be more accurate predictors of real-time signal processing performance.

Multiprocessing Support
Even with the powerful DSPs available today, there are times when the DSP task for a given system does not fit into a single processor. Examples of such applications include sonar, radar, medical imaging, audio mixers, etc. In these cases, the ability to connect multiple processors in a system without any glue logic greatly simplifies the implementation. Analog Devices offers SHARC and TigerSHARC processors with specialized hardware for glueless multiprocessing.

Circular Buffers
Circular buffers allow a region of memory to be continually accessed without explicit program interaction. The buffer uses a pointer that automatically resets to the beginning of the buffer (wraparound) if the pointer is advanced beyond the last location in the buffer. Circular buffers are a key feature of DSP routines. Multiple buffers are used in the same routine to store filter coefficients and implement a delay line of input samples. Performance suffers if the DSP core has to perform pointer calculations along with the calculations for the routine. Performance also suffers if the DSP core only supports one circular buffer and must save and restore address registers to implement multiple buffers. Analog Devices processors have hardware support for multiple circular buffers, eliminating processor overhead for address calculations.

On-Chip Memory/On-Chip SRAM Size

The amount of on-chip memory available can greatly impact system performance, cost, size, power consumption, and complexity. Any time the DSP core accesses external memory, performance can suffer. Off-chip memory often requires the core to wait additional cycles. In contrast, the DSP core can access on-chip memory at the same rate as its instruction rate. Supplemental memory adds extra components to the system, which increases cost, power consumption, and complexity. ADI processors have on-chip memories that often eliminate the need for external memory in a system. Furthermore, the memory is configurable for data-word size, code word size, and storage size. This allows designers to tailor the memory to meet the algorithm requirements.

DMA Channels/Nonintrusive DMA

The DMA (direct memory access) channels transfer data between an external source and the processors on-chip memory. With DMA channels, data transfers occur without the core processor having to execute data movement instructions. For example, the overhead clock cycles used to move data for an FFT can add a significant amount of time to overall algorithm execution. With multiple DMA channels available, all data transfers happen without core involvement, eliminating any overhead clock cycles. One of the strengths of Analog Devices processor architecture is that these DMAs do not interfere with the core operation. This capability is referred to as nonintrusive or zero-overhead DMA.

TDM Mode
TDM (time division multiplexed) mode refers to time division multiplexing, which is a common mode for transferring serial data. In telecommunications applications, T1 and E1 lines use TDM. TDM allows multiple serial devices to send and receive information using the same physical connection. TDM also allows communication between multiple processors. All ADI products support TDM mode in the serial ports.

Interrupt Latency
Interrupt latency is a measure of how quickly a processor responds to an interrupt. Quick response is important, especially in real-time processing. For example, an interrupt that might indicate the availability of data is only available for a finite amount of time; therefore, fast response is critical, or the data will be lost. Analog Devices products feature fast interrupt response time for quick execution of interrupt service routines.

Zero-Overhead Looping
The code for most DSP routines falls naturally into a set of nested loops. Without the support for zero-overhead looping, the DSP core must spend cycles calculating the loop termination values, in addition to the cycles used to process the algorithms computations. Without zero-overhead looping, performance degrades. Analog Devices offers 16-bit fixed-point and 32-bit fixed- and floating-point processors with zero-overhead, nestable looping to save instruction cycles.

www.analog.com/processors

17

ADI Processor Benchmarks1

Cycle Count Blackfin Processor Block FIR Filter Biquad IIR Filter (4 Coeff) Complex FIR Filter Delayed LMS Filter 1024-Point Complex FFT (Prescaled) 256-Point Complex FFT (Out of Place) Max Search Max Index Search (x/2)(2 + h) 2.5bq + 3.5 2h + 2 1.5h + 4.5 11,559 2324 0.5N 0.5N 19.3 s 3.87 s Execution Time @ 600 MHz

ADSP-21160N ADSP-21161N SHARC Processor (SIMD) Clock Speed Instruction Cycle Time MFLOPS Sustained Peak MOPS (32-Bit, Fixed-Point) Sustained Peak 1024-Point Complex FFT (Radix 4, with Digit Reverse) FIR Filter (per Tap) IIR Filter (per Biquad) Matrix Multiply (3 3) (3 1) (4 4) (4 1) Divide (y/x) Inverse Square Root 100 MHz 10 ns 400 MFLOPS 600 MFLOPS 400 MFLOPS 600 MFLOPS 92 s 5 ns 20 ns 45 ns 80 ns 30 ns 45 ns

ADSP-2126x

ADSP-2136x

ADSP-21371 ADSP-21375 266 MHz 3.75 ns 1064 MFLOPS 1596 MFLOPS 1064 MFLOPS 1596 MFLOPS 34.5 s 1.88 ns 7.5 ns 16.91 ns 30.07 ns 11.27 ns 16.91 ns

ADSP-2146x

200 MHz 5 ns 800 MFLOPS 1200 MFLOPS 800 MFLOPS 1200 MFLOPS 46 s 2.5 ns 10 ns 22.5 ns 40 ns 15 ns 22.5 ns

400 MHz 2.5 ns 1600 MFLOPS 2400 MFLOPS 1600 MFLOPS 2400 MFLOPS 23 s 1.25 ns 5.0 ns 11.25 ns 20.0 ns 7.5 ns 11.25 ns

450 MHz 2.22 ns 1800 MFLOPS 2700 MFLOPS 1800 MFLOPS 2700 MFLOPS 20.44 s 1.11 ns 4.43 ns 10.00 ns 17.78 ns 6.67 ns 10.00 ns

Cycle Count TigerSHARC Processor 256-Point Radix 2 Complex FFT (16-Bit) 1k Point Complex FFT2 (Radix 2) (32-Bit) 64k Point Complex FFT2 (Radix 2) (32-Bit) FIR Filter (per Real Tap) (32-Bit) [8 8][8 8] Matrix Multiply (Complex, Floating-Point)
NOTES 1 Benchmarks are for best data conditions. 2 Cache preloaded. h = number of taps. bq = number of biquads. x = number of samples.

Execution Time @ 600 MHz 0.875 s 15.64 s 2.33 ms 0.83 ns 2.3 s

525 9384 1,397,544 0.5 1399

18

Embedded Processors and DSP Selection Guide

ADI Processor Benchmarks

EEMBC Blackfin Comparison
EEMBC benchmarks represent out-of-the-box performance for a typical suite of consumer applications. For more information, see www.eembc.com.

Blackfin Controller Performance

Processor Product Clock Frequency (MHz) Certified on Hardware? EEMBC Networking 2.0 IPmark2 TCPmark2 EEMBC Autobench 1.11 Automark2 EEMBC ConsumerBench1.11 Consumermark2 EEMBC AOBench1.1 AOmark2 EEMBC TeleBench1.11 Telemark2 EEMBC DENBench1.01 MPEG Decodemark2 MPEG Encodemark2 Cryptomark DENmark2 EEMBC Geometric Mean
NOTES 1 Out-of-the-box category.
2 3

Blackfin ADSP-BF533 594 Yes

1

ARM1136JF-S i.MX31 532 Yes 50.4 68.5 126.6 26.6 341 6.1 231 243 219 315 45.5 99.3

ARM926EJ-S i.MX21 266 Yes 24.4 29.23 29.6 13.7 152 2.5 112 100 104 154 21.6 42.6

45 117 183.1 54.9

1

352 11.7 337 392 257 352 57.5 138.7

Imagemark2

Iterations per second (bigger is better). i.MX21 TCPmark contains an estimate for one subtest whose result is filed n/a at EEMBC. (Estimate is i.MX31 performance.)

EEMBC is a registered trademark of the Embedded Microprocessor Benchmark Consortium. For more information and scores, go to www.eembc.org.

www.analog.com/processors

19

Blackfin Processor Family

High Performance, Low Power Processing Leadership

Blackfin processors are a new breed of embedded media processors, designed specifically to meet the computational demands and power constraints of todays embedded audio, video, and communications applications. Blackfin processors combine a 32-bit RISC-like instruction set and dual 16-bit multiply accumulate (MAC) signal processing functionality with the ease-of-use attributes found in general-purpose microcontrollers. Blackfin processors perform equally well in both signal processing and control processing applications, in many cases deleting the requirement for separate heterogeneous processors. This capability greatly simplifies both the hardware and software design implementation tasks. Blackfin processors offer performance up to 600 MHz/1200 MMACS in single-core products. Symmetric, multiprocessor members of the Blackfin family extend this performance to over 3000 MMACS. The family offers the lowest power consumptionas low as 0.15 mW/MMAC at 0.8 V. The combination of high performance and low power is essential in meeting the needs of today and future signal processing applications, including broadband wireless, audio-/video-capable Internet appliances, and mobile communications. All Blackfin processors offer fundamental benefits to the system designer, including: High performance signal processing and efficient control processing capability Dynamic power management (DPM), enabling the system designer to tailor device power consumption to the end-system requirements Easy to use instruction set architecture and development tools suite that saves development time

Efficient Control Processing

The Blackfin processor architecture also offers a variety of benefits most often seen in RISC control processors. These features include a hierarchical memory architecture, superior code density, and a variety of microcontroller-style peripherals, including a watchdog timer, a realtime clock, and an integrated SDRAM controller. All of these features provide the system designer with a great deal of design flexibility while minimizing end system costs.
L1 INSTRUCTION SRAM OR CACHE

PROCESSOR CORE

BLACKFIN

L2 UNIFIED INSTRUCTION AND DATA SRAM

L1 DATA SRAM AND/OR CACHE

SCRATCHPAD SRAM

MEMORY DMA

Dynamic Power Management

All Blackfin processors employ multiple power-saving techniques. Blackfin processors are based on a gated clock core design that selectively powers down functional units on an instruction-by-instruction basis. Blackfin processors also support multiple power-down modes for periods when little or no CPU activity is required. Last, and probably most importantly, Blackfin processors support a dynamic power management scheme whereby the operating frequency and voltage can be tailored to meet the performance requirements of the algorithm currently being executed. These transitions may occur continually under the control of an RTOS or user firmware. Some currently available products also offer on-chip core voltage regulation circuitry as well as operation to as low as 0.8 V and all are particularly well-suited for portable applications requiring extended battery life.

High Performance Signal Processing

The Blackfin processor architecture employs numerous techniques to ensure that signal processing performance is maximized. These include a fully interlocked instruction pipeline, multiple parallel computational blocks, efficient DMA capability, and instruction set enhancements designed to accelerate video processing.
ADDRESS ARITHMETIC UNIT
SP FP P5 P4 P3 P2 P1 P0 I3 I2 I1 I0 L3 L2 L1 L0 B3 B2 B1 B0 M3 M2 M1 M0

Easy to Use
A single Blackfin processor can be utilized in many applications previously requiring both a high performance signal processor and a separate efficient control processor. This benefit greatly reduces development time and costs, ultimately enabling end products to get to market sooner. Additionally, a single set of development tools can be used, which decreases the system designers initial expenses and learning curve.

DAG0

DAG1

SEQUENCER ALIGN DECODE LOOP BUFFER

R7 R6 R5 R4 R3 R2 R1 R0

8 BARREL SHIFTER

16

16

CONTROL UNIT
8

40 ACC0

40 ACC1

CORE PROCESSOR

DATA ARITHMETIC UNIT

20

Embedded Processors and DSP Selection Guide

Blackfin Processor Family

Analog Devices long-term commitment to the Blackfin processor means each subsequent generation of Blackfin-based designs will benefit from increases in speed, power efficiency, and cost reductions across a broad range for single and dual core processors. The Blackfin processor family includes devices that target a wide range of applications in the consumer, automotive, industrial, instrumentation, and communications markets. To address these markets, the Blackfin processor family offers scalable performance from the 200 MHz ADSP-BF535 to the dual core 600 MHz ADSP-BF561 to the ADSP-BF52x with advanced peripherals to the low power ADSP-BF51x family with real-time Ethernet capabilities and the ADSP-BF50x with integrated flash and analog-todigital converter. Future devices will further extend ADIs leadership in performance and power efficiency while maintaining code compatibility and providing the widest array of processor options for the most demanding convergent processing challenges.

Blackfin Processor Product Portfolio

Value Highest Performance

ADSP-BF592 ADSP-BF504 ADSP-BF512 ADSP-BF514 ADSP-BF522 ADSP-BF523 ADSP-BF531 ADSP-BF533 ADSP-BF534 ADSP-BF537 ADSP-BF538 ADSP-BF542 ADSP-BF561 ADSP-BF504F ADSP-BF516 ADSP-BF524 ADSP-BF525 ADSP-BF532 ADSP-BF535 ADSP-BF539 ADSP-BF544 ADSP-BF506F ADSP-BF518 ADSP-BF526 ADSP-BF527 ADSP-BF536 ADSP-BF547 ADSP-BF548

Future

Low BOM Cost Baseline Connectivity System-Level Connectivity Low Standby Lockbox Security System Integration (Flash, Mixed-Signal) 600 MHz or Greater Multicore

Blue product number indicates automotive grade is available.

www.analog.com/processors

21

22
Memory DMA Other Internal External Memory (Channels) Memory (Bytes) Type Supported Serial Ports 1 UART, 2 SPORTs, 2 SPIs, TWI Up to 32 1.47 1.225
7 7

|
Peripheral Options1 Other Ports/ Features Package4, 5 9 mm 9 mm, 0.5 mm 64-lead LFCSP 40C to +85C 0C to +70C 40C to +105C 40C to +85C 40C to +105C 40C to +85C PPI/LCD, ROM libraries 1.8, 2.5, 3.3 1457 84 1457 847 3.3 1457 14 mm 14 mm, 0.4 mm, 40C to +85C, 120-lead LQFP_EP 0C to +70C 3.3 4 GP, 3 PWM Packaging and Operating Temperature Range Options4, 5 Voltage (V) Nominal2 Total Core Number Timers Core VDDINT External Power Typ of (mW)3 (Max Speed) (I/O) GPIOs 3.557 64k L1 ROM 9 1.47 (400 MHz) 1.37 (300 MHz) 1277 1.8, 2.5, (400 MHz) 867 3.3 (300 MHz) 1.99 5.187 7.487 8.067 12.217 12.787 PPI/LCD, RSI/SDIO, 2 PWMs, 2 rotary encoders, ACM Up to 35 1.2257 1.47 8 GP, WD 1.47 12 mm 12 mm, 0.5 mm, 40C to +85C, 88-lead LFCSP 0C to +70C 14 2 UARTs, 2 SPORTs, 2 SPIs, TWI CAN PPI/LCD, RSI/SDIO, 2 PWMs, 2 rotary encoders, ACM, 12-bit dual SAR ADC (12-channel) 1.225 1.40 1.40 1.225 1.40 1.40 1.225 1.40 1.40 1.40 1.40 1.8, 2.5, 3.3 150 84 150 150 84 150 150 150 150 150 84 PPI/LCD, PWM, rotary encoder, Lockbox 512k SPI flash 40C to +85C 40C to +85C 40C to +85C 40C to +85C 6.26 8.35 9.73 7.77 8.92 10.31 8.92 10.08 11.46 13.07 12 mm 12 mm, 0.8 mm, 168-ball CSP_BGA; 24 mm 24 mm, 0.5 mm, 176 LQFP_EP 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 1.225 93 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA 1.40 2 UARTs, 2 SPORTs, SPI, TWI 1.15 Async, SDRAM, mobile SDRAM, NAND flash 14 PPI/LCD, Lockbox, host Up to 48 DMA, rotary encoder 8 GP, WD RTC 1.20 1.8, 2.5, 3.3 205 166 158 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA; 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 1.225 93 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA USB 2.0 HS OTG, 2 UARTs, 2 SPORTs, SPI, TWI 1.40 158 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA 40C to +85C 14.45 40C to +85C 8.18 0C to +70C 40C to +85C 10.33 0C to +70C 40C to +85C 13.46 0C to +70C 0C to +70C 16.99 12 mm 12 mm, 0.8 mm, 168-ball CSP_BGA; 40C to +85C, 24 mm 24 mm, 0.5 mm, 0C to +70C 176-lead LQFP_EP PPI/LCD, Lockbox, ATAPI, RSI/SDIO, rotary encoder, PWM 8 GP, WD, RTC Async, SDRAM, mobile SDRAM 14 12 mm 12 mm, 0.8 mm, 168-ball CSP_BGA; 40C to +85C, 24 mm 24 mm, 0.5 mm, 0C to +70C 176-lead LQFP_EP 512k SPI flash 512k SPI flash 2 UARTs, 2 SPORTs, 2 SPIs, Up to 40 Ethernet MAC, PPI/LCD, TWI Lockbox, ATAPI, RSI/ SDIO, rotary encoder, PWM 12 mm 12 mm, 0.8 mm, 168-ball CSP_BGA; 40C to +85C, 24 mm 24 mm, 0.5 mm, 0C to +70C 176-lead LQFP_EP Ethernet MAC (IEEE1588), PPI/LCD, Lockbox, ATAPI, RSI/ SDIO, rotary encoder, PWM 40C to +85C 9.58 0C to +70C 40C to +85C 12.03 0C to +70C

Blackfin Processor Family Selection Table

Price Temperature Range Temperature @ 1k Availability (Nonautomotive Range Automotive ($U.S.)6 Grade) Grade (W)2 Production

Performance

Part Number

Clock Speeds (MHz)

16-Bit On-Chip L1 Fixed-Point Program MMACS (Bytes)

On-Chip L1 Data (Bytes)

Single Core

ADSP-BF592

400

800

32k SRAM

ADSP-BF592-2

200

400

32k SRAM (+ 4k scratchpad)

ADSP-BF504

400

800

ADSP-BF504F

300

600

400

800

300

600

16k SRAM/ 16k SRAM/cache cache + 16k SRAM + 16k SRAM (+ 4k scratchpad) 4M parallel flash

Production

Embedded Processors and DSP Selection Guide

ADSP-BF506F

400

800

ADSP-BF512

300

600

400

800

ADSP-BF512F

400

800

ADSP-BF514

300

600

400

800

ADSP-BF514F

400

800

ADSP-BF516

300

600

400

800

16k SRAM/ 32k SRAM/cache 512k SPI flash cache + 32k SRAM + 32k SRAM (+ 4k scratchpad)

Production

ADSP-BF516F

400

800

ADSP-BF518

400

800

ADSP-BF518F

400

800

300

600

ADSP-BF522

Production

400

800

533

1066

ADSP-BF523

16k SRAM/ 32k SRAM/cache cache + 32k SRAM + 48k SRAM (+ 4k scratchpad)

Production

600

1200

300

600

ADSP-BF524

Production

400

800

Performance DMA Other Internal External Memory (Channels) Memory (Bytes) Type Supported Serial Ports
4, 5

Memory Other Ports/ Features Package 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 40C to +85C 0C to +70C 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA 40C to +85C 15.17 Total Core Number Timers Core VDDINT External Power Typ of (mW)3 (Max Speed) (I/O) GPIOs

Peripheral Options1

Voltage (V) Nominal2

Packaging and Operating Temperature Range Options4, 5

Part Number

Clock Speeds (MHz)

16-Bit On-Chip L1 Fixed-Point Program MMACS (Bytes)

On-Chip L1 Data (Bytes)

Price Temperature Range Temperature @ 1k Availability (Nonautomotive Range Automotive ($U.S.)6 Grade) Grade (W)2

Single Core

533 PPI/LCD, Lockbox, host DMA, rotary encoder 1.20 205 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA; 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 0C to +70C 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA

1066

1.15

166

ADSP-BF525

Production 18.71

600

1200

40C to +85C 10.76 0C to +70C 40C to +85C 13.82 0C to +70C 40C to +85C 16.99 0C to +70C Production Production

300 1.40 Ethernet MAC, PPI/LCD, Lockbox, host DMA, rotary encoder 1.15 166 158 Async, SDRAM, mobile SDRAM, NAND Flash 14 Up to 48 1.8, 2.5, 3.3 USB 2.0 HS OTG, 2 UARTs, 2 SPORTs, SPI, TWI 8 GP, WD RTC

600

1.225

93

ADSP-BF526

16k SRAM/ 32k SRAM/cache cache + 32k SRAM + 48k SRAM (+ 4k scratchpad)

400

800

533

1066

ADSP-BF527 1.20 205

600

1200

12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA; 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 93 12 mm 12 mm, 0.5 mm, 289 CSP_BGA

0C to +70C

20.56

ADSP-BF522C 2 UARTs, 2 SPORTs, SPI, TWI PPI/LCD, Lockbox, host DMA, rotary encoder, stereo audio codec Up to 48

300

600

1.225 1.40 1.15 1.20 1.225 1.40 1.15 1.20 1.225 1.40 1.15 1.20 1.8, 2.5, 3.3

400

800

158 166 205 93 158 166 205 93 158 166 205

0C to +70C

9.89 12.04 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA 0C to +70C 15.63 19.24 0C to +70C 11.29 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA 12 mm 12 mm, 0.5 mm, 289-ball CSP_BGA 12 mm 12 mm, 0.8 mm, 160 CSP_BGA 1.20 150 19 mm 19 mm, 1.0 mm, 169-ball PBGA 24 mm 24 mm, 0.5 mm, 176-lead LQFP 40C to +85C 0C to +70C 13.74 17.37 21.00 0C to +70C 12.47 15.53 0C to +70C 40C to +105C 40C to +85C 40C to +85C 5.99 19.24 22.89

Production

ADSP-BF523C

533

1066

600

1200

Production

ADSP-BF524C Async, SDRAM, mobile SDRAM, NAND flash 14 USB 2.0 HS OTG, 2 UARTs, 2 SPORTs, SPI, TWI

300

600

400

800

Production 8 GP, WD RTC

ADSP-BF525C

533

1066

16k SRAM/ 32k SRAM/cache cache + 32k SRAM + 48k SRAM (+ 4k scratchpad)

600

1200

Production

ADSP-BF526C

300

600

400

800

Production

ADSP-BF527C

533

1066

600

1200

Ethernet MAC, PPI/LCD, Lockbox, host DMA, rotary encoder, stereo audio codec

Production

ADSP-BF531

400

800

16k SRAM/ 16k SRAM/cache cache (+ 4k scratchpad) + 16k SRAM Async, SDRAM, mobile SDRAM 12 UART, 2 SPORTs, SPI PPI/LCD 16 3 GP, WD RTC

1.8, 2.5, 3.3

12 mm 12 mm, 0.8 mm, 160 CSP_BGA 1.20 150 19 mm 19 mm, 1.0 mm, 169-ball PBGA 24 mm 24 mm, 0.5 mm, 176-lead LQFP 40C to +85C

40C to +105C 40C to +85C 40C to +85C 9.33

Production

www.analog.com/processors

ADSP-BF532

400

800

16k SRAM/ 32k SRAM/cache cache (+ 4k scratchpad) + 32k SRAM

23

24
Memory DMA Other Internal External Memory (Channels) Memory (Bytes) Type Supported Serial Ports 12.19 40C to +105C 40C to +85C 40C to +85C 0C to +70C 40C to +105C 15.33 15.15 20.19 18.53 12.40 40C to +85C Production 24 mm 24 mm, 0.5 mm, 176-lead LQFP 19 mm 19 mm, 1.0 mm, 169-ball PBGA; 12 mm 12 mm, 0.8 mm, 160-ball CSP_BGA Other Ports/ Features Package4, 5 Peripheral Options1 Packaging and Operating Temperature Range Options4, 5 Voltage (V) Nominal2 Total Core Number Timers Core VDDINT External Power of 3 (Max Speed) (I/O) Typ (mW) GPIOs Price Temperature Range Temperature @ 1k Availability (Nonautomotive Range Automotive ($U.S.)6 Grade) Grade (W)2 1.20 150 1.20 1.25 1.30 319 12 mm 12 mm, 0.8 mm, 160-ball CSP_BGA 250 228 19 mm 19 mm, 1.0 mm, 169-ball PBGA; 12 mm 12 mm, 0.8 mm, 160-ball CSP_BGA Async, SDRAM, mobile SDRAM 12 PPI/LCD 16 UART, 2 SPORTs, SPI 3 GP, WD RTC 1.8, 2.5, 3.3 1.20 PPI/LCD 150 1.20 2.5, 3.3 1.20 1.20 Ethernet MAC, PPI/LCD 1.20 1.25 1.30 1.20 28 Async, SDRAM 34 PPI/LCD, MXVR 1.25 1.20 ePPI/LCD, ATAPI, SDIO, keypad, rotary, pixel compositor, Lockbox 8 GP, WD RTC 1.25 1.35 1.20 2 ePPI/LCD, host dma keypad, rotary, pixel compositor, Lockbox 11 GP, WD RTC Up to 152 28 USB 2.0 HS OTG, 4 UARTs, 4 SPORTs, 4 SPIs, 2 TWIs 1.25 3.0, 3.3 2.5, 3.3 2.5, 3.3, 1.23 (mDDR) 2.5, 3.3 2.5, 3.3 2.5, 3.3, 1.23 (mDDR) 1.25 1.35 11 GP, WD RTC 2.5, 3.3, 1.23 (mDDR) 2.5, 3.3 225 239 376 462 239 376 17 mm 17 mm, 0.8 mm, 400-ball CSP_BGA 40C to +85C 17 mm 17 mm, 0.8 mm, 400-ball CSP_BGA 40C to +85C 40C to +85C 17.40 0C to +70C 40C to +85C 19.14 16.56 18.40 Production 376 462 40C to +85C 17 mm 17 mm, 0.8 mm, 400-ball CSP_BGA 0C to +70C 22.12 20.11 3 UARTs, 4 SPORTs, 3 SPIs, 2 TWIs, CAN PPI/LCD Up to 54 3 GP, WD RTC 1.25 1.20 1.25 1.25 2.5, 3.3 3.0, 3.3 2.5, 3.3 120 150 210 231 295 156 225 156 225 225 17 mm 17 mm, 0.8 mm, 316-ball CSP_BGA 40C to +85C 210 15.39 Production 10.07 40C to +85C 13.11 40C to +85C 0C to +70C 17.15 19.09 21.20 16.03 16.28 20.26 20.67 Contact ADI 17 mm 17 mm, 0.8 mm, 316-ball CSP_BGA 40C to +85C Contact ADI 15.66 Production Async, SDRAM 14 2 UARTs, 2 SPORTs, SPI, TWI, CAN Up to 48 8 GP, WD RTC 17 mm 17 mm, 0.8 mm, 40C to +105C 208-ball CSP_BGA 12 mm 12 mm, 0.8 mm, 182-ball CSP_BGA; 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 40C to +85C 12 mm 12 mm, 0.8 mm, 182-ball CSP_BGA; 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 12 mm 12 mm, 0.8 mm, 182-ball CSP_BGA; 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA 12 mm 12 mm, 0.8 mm, 182 CSP_BGA; 17 mm 17 mm, 0.8 mm, 208-ball CSP_BGA USB 2.0 HS OTG, 3 UARTs, 3 SPORTs, 2 SPIs, TWI, CAN 64k L2 SRAM Async, DDR1, NAND flash (mDDR option for 533 MHz grade only) 3 UARTs, 3 SPORTs, 2 SPIs, 2 TWIs, 2 CANs 128k L2 SRAM 2 ePPI/LCD, ATAPI, SDIO, host dma, keypad, USB 2.0 HS OTG, rotary, pixel compositor, Lockbox 4 UARTs, 4 SPORTs, 3 SPIs, 2 TWIs, 2 CANs 1.25 2.5, 3.3, 1.23 (mDDR) 376 17 mm 17 mm, 0.8 mm, 400-ball CSP_BGA 40C to +85C 20.71

Performance

Part Number

Clock Speeds (MHz)

16-Bit On-Chip L1 Fixed-Point Program MMACS (Bytes)

On-Chip L1 Data (Bytes)

Single Core

400

800

ADSP-BF533

500

1000

16k SRAM/ 32k SRAM/cache cache + 32k SRAM + 64k SRAM (+ 4k scratchpad)

533

1066

600

1200

Embedded Processors and DSP Selection Guide

400

800

ADSP-BF534

32k SRAM/cache + 32k SRAM (+ 4k scratchpad)

500

1000

300

600

16k SRAM/ cache + 48k SRAM

ADSP-BF536

400

800

32k SRAM/cache (+ 4k scratchpad)

500

1000

ADSP-BF537

533

1066

600

1200

32k SRAM/cache + 32k SRAM (+ 4k scratchpad)

ADSP-BF538

400

800

533

1066

ADSP-BF538F

400

800

533

1066

ADSP-BF539

533

1066

ADSP-BF539F

533

1066

32k SRAM/cache + 32k SRAM 16k SRAM/ (+ 4k scratchpad) 1M parallel flash cache + 64k SRAM 32k SRAM/cache +32k SRAM 512k/1M (+ 4k scratchpad) parallel flash

400

800

ADSP-BF542

533

1066

600

1200

400

800

ADSP-BF544

533

1066

16k SRAM/ 32k SRAM/cache cache + 32k SRAM + 48k SRAM (+ 4k scratchpad)

533

1066

ADSP-BF547

600

1200

ADSP-BF548

533

1066

Performance DMA Other Internal External Memory (Channels) Memory (Bytes) Type Supported Serial Ports 1.20 1.50 1.60 796 3.3 580 19 mm 19 mm, 1.0 mm, 260-ball PBGA 40C to +85C, 0C to +70C 247 2 UARTs, 2 SPORTs, 2 SPIs, USB 1.1 PCI, PWM 16 3 GP, WD RTC 31.27 34.40 43.00 Other Ports/ Features Package4, 5 Async, SDRAM 12

Memory

Peripheral Options1

Packaging and Operating Temperature Range Options4, 5

Part Number

Clock Speeds (MHz)

16-Bit On-Chip L1 Fixed-Point Program MMACS (Bytes)

On-Chip L1 Data (Bytes)

Voltage (V) Nominal2 Total Core Number Timers Core VDDINT External Power of 3 (Max Speed) (I/O) Typ (mW) GPIOs

Price Temperature Range Temperature @ 1k Availability (Nonautomotive Range Automotive ($U.S.)6 Grade) Grade (W)2 Production

Single Core

200

400

ADSP-BF535

300

600

350

700

16k SRAM/ 32k SRAM/cache 256k L2 SRAM cache

Dual Core 12 mm 12 mm, 0.65 mm, 256-ball CSP_BGA 0C to +70C 20.40 1.25 825 17 mm 17 mm, 1.0 mm, 256-ball CSP_BGA; 27 mm 27 mm, 1.0 mm, 297-ball PBGA

500

2000

40C to +85C 0C to +70C

40C to +105C

ADSP-BF561

533

2132

16k SRAM/ 32k SRAM/cache cache + 32k SRAM 128k L2 SRAM + 16k SRAM (per core) (per core) Async, SDRAM 24 UART, 2 SPORTs, SPI 2 PPI/LCD Up to 48 12 GP, 2 WD 1.25 2.5, 3.3 964

17 mm 17 mm, 1.0 mm, 256-ball CSP_BGA; 27 mm 27 mm, 1.0 mm, 297-ball PBGA 12 mm 12 mm, 0.65 mm, 256-ball CSP_BGA 27 mm 27 mm, 1.0 mm, 297-ball PBGA

Contact ADI

Production 0C to +70C 40C to +85C 0C to +70C 27.70

29.13 0C to +70C 12 mm 12 mm, 0.65 mm, 256-ball CSP_BGA; 17 mm 17 mm, 1.0 mm, 256-ball CSP_BGA

600

2400

1.35

1104

NOTES

Due to pin muxing options, not all peripheral combinations may be available simultaneously. Please refer to data sheet and user manuals for full information.

Automotive grade products may require different voltage conditions. Please refer to data sheet for full information.

Core power (mW) stated for maximum core operating speed of the device at TJ = 25C, ASF = 1.0 (Using VDDINT nominal and IDD-TYP supply current for typical activity. Typical activity is the core executing an application comprised of 75% dual-MAC instructions and 25% dual-ALU instructions. All instructions and data are located in L1 SRAM, and peripherals are not enabled). Please refer to associated data sheet and EE notes for further details and complete power calculation information. Dynamic power management available via software programmable PLL, core voltage modifications, and a number of power-down modes. ADSP-BF522, ADSP-BF524, ADSP-BF526, ADSP-BF51x, and ADSP-BF50x products offer lowest deep-sleep power and less power variation over temperature.

All DSP products available in RoHS compliant options. Please refer to data sheet for complete information.

All packaging, operating temperature, and grade combinations may not be available. Please refer to data sheet for full information and contact ADI for options outside those listed.

Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate the lowest priced version of that particular speed device and will vary depending on package type and/or temperature range and grade.

Pricing, power, and core voltage are subject to change. Please contact ADI for further information.

www.analog.com/processors

25

ADSP-BF592 Blackfin Processor

Low Cost with Optimized Peripheral Set for Industrial and General-Purpose Applications

The ADSP-BF592 is the low cost entry point into the Blackfin portfolio of processors. With core clock speeds of 200 MHz and 400 MHz and a peripheral set including two SPORTs, a PPI, two SPIs, four general-purpose counters and a factory-programmed instruction ROM block containing the VDK RTOS and C runtime libraries, the ADSP-BF592 is feature and cost optimized for compute intensive industrial, automotive, and general-purpose applications that do not require external memory or executable flash. The ADSP-BF592 is offered in a low cost 9 mm 9 mm LFCSP package in commercial and industrial temperature grades as well as automotive qualified. Features Blackfin processor core with 400 MHz (800 MMACS) performance and 68 kB L1 memory L1 instruction ROM block with VDK RTOS and C runtime libraries Low power dissipation of 51mW at 200 MHz 2 SPIs, 2 SPORTs, 2 UARTs, and 1 PPI 4 general-purpose counters, 3 with PWM support 9 peripheral DMA channels and 2 memory to memory DMA channels 9 mm 9 mm LFCSP package Commercial, industrial, and automotive temperature grades

Markets and Applications Consumer audio Low cost imaging devices Smart meters Consumer handheld devices Medical equipment Automotive driver assistance systems

ADSP-BF592 Block Diagram

TEST AND EMULATE INTERRUPT CONTROLLER WATCHDOG TIMER 32-BIT CORE TIMER PLL AND POWER MANAGEMENT

400MHz BLACKFIN PROCESSOR CORE

DATA SRAM 32kB

DATA SCRATCHPAD SRAM 4kB

INSTRUCTION ROM 64kB

INSTRUCTION SRAM 32kB L1

BOOT ROM 4kB L3

DMA CONTROLLER

I/O SIGNAL MULTIPLEXING TWI SPORT0, 1; SPI0, 1; UART 16-BIT PPI ITU-656 32 GPIOs 3 32-BIT GP TIMERS

Part Number ADSP-BF592BCPZ ADSP-BF592KCPZ ADSP-BF592KCPZ-2

NOTES
1

Max (MHz) Max (MMACS) 400 400 200 800 800 400

L1 Memory Ambient Temperature (kB) Range (C) 68 68 68 40C to +85C 0C to +70C 0C to +70C

Key Peripherals

Package

Price @ 1k ($U.S.)1 4.33

SPI, PPI, SPORT, UART

64-lead LFCSP

3.55 1.99

Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade.

Z = RoHS compliant part.

26

Embedded Processors and DSP Selection Guide

ADSP-BF504/ADSP-BF504F/ADSP-BF506F Blackfin Processors

Low Power and Cost Optimized with Optional Integrated Executable Flash and 12-Bit ADC

The ADSP-BF50x family of processors brings a new level of system integration to the Blackfin portfolio by combining a high performance Blackfin processor with a 4 MB executable flash memory and a 12-bit, dual SAR ADC. Additionally, with a peripheral set including multiple serial interfaces, a parallel port interface, a CAN controller, two UARTs, eight general-purpose timers, and two 3-phase PWM interfaces, the ADSP-BF50x family is well suited for a variety of industrial and instrumentation applications. The 12-bit, dual SAR ADC is a hallmark feature of the ADSP-BF506F. This integrated signal conversion capability based on Analog Devices legendary analog signal processing technology meets the demanding requirements of a multitude of advanced power electronics applications, including motor control, universal power supply, and alternative energy inverters, as well as many other signal processing applications. An integrated ADC control module peripheral on the ADSP-BF50x family enables highly synchronized and precise control of the ADCs input sampling, eliminating the need for less precise software-based control or more expensive external logic-based control. The ADSP-BF50x family of processors offers a highly optimized memory architecture that combines 68 kB of core L1 memory with 4 MB of synchronous burst flash memory that can be used for program execution, as well as data and boot code storage. This ample memory storage allows system designers to eliminate costly and power hungry external SDRAM chips and also serves to reduce the pin count, package size, and cost of the ADSP-BF50x processors vs. processors that provide external memory interfaces. For low cost, low power, small memory footprint applications, the ADSP-BF50x family of processors offers best-in-class processor performance in its price range enabling advanced signal processing capabilities that previously werent possible due to price constraints of competitive processors on the market. Addressing the need for integration of external mass storage devices, the removable storage interface of the ADSP-BF50x family of processors supports popular removable storage options such as MMC and SD, as well as providing an interface to wireless interfaces such as Bluetooth. Features Blackfin processor core with up to 400 MHz (800 MMACS) performance 68 kB L1 SRAM and optional 4 MB synchronous, parallel burst flash memory Optional 12-bit, dual SAR ADC ADC control module for precise ADC sampling of inputs Two 3-phase PWM units Connectivity: SDIO, CE-ATA, eMMC, UARTs, SPORTs, SPI, PPI, CAN and TWI 8 general-purpose counters 12 peripheral DMA channels supporting one- and twodimensional data transfers Multiple low power modes, including external voltage regulator interface with multiple GPIO wakeup. 120-lead, 0.4 mm pitch, 14 mm 14 mm LQFP (ADSP-BF506F) 88-lead, 0.5 mm pitch, 12 mm 12 mm LFCSP (ADSP-BF504 and ADSP-BF504F) Commercial and industrial temperature range

Applications Motor control Uninterruptible power supplies Programmable logic controllers Alternative energy inverters Biometric systems Medical devices Consumer audio Automotive Games/learning aids Industrial and instrumentation Portable test equipment PMPs Cameras Image scanners

ADSP-BF50x Block Diagram

SYSTEM CONTROL BLOCKS EMULATOR TEST AND CONTROL EVENT CONTROLLER WATCHDOG TIMER TWI (I2C COMPATIBLE) PLL OPTIONAL IN-PACKAGE DIE BLACKFIN PROCESSOR CORE FLASH 4MB

INSTRUCTION SRAM 16kB CACHE 16kB

DATA SRAM 16kB CACHE 16kB

SCRATCHPAD SRAM 4kB ADC

SYSTEM INTERFACE UNIT L1 MEMORY

PERIPHERAL BLOCKS CAN, PPI, 2 UART WITH FLOW CONTROL, 2 SPORT, 2 SPI, 8 GP TIMERS, 2 3-PHASE PWM, 2 ROTARY COUNTER, ADC CONTROL MODULE, REMOVABLE STORAGE INTERFACE 35 GPIOs

www.analog.com/processors

27

ADSP-BF504/ADSP-BF504F/ADSP-BF506F Blackfin Processors

Low Power and Cost Optimized with Optional Integrated Executable Flash and 12-Bit ADC
Part Number ADSP-BF504BCPZ-4 ADSP-BF504KCPZ-4 ADSP-BF504BCPZ-3F ADSP-BF504KCPZ-3F ADSP-BF504BCPZ-4F ADSP-BF504KCPZ-4F ADSP-BF506BSWZ-3F ADSP-BF506KSWZ-3F ADSP-BF506BSWZ-4F ADSP-BF506KSWZ-4F Max (MHz) 400 400 300 300 400 400 300 300 400 400 Max L1 Memory Ambient Temperature (MMACS) (kB) Range (C) 800 800 600 600 800 800 600 600 800 800 68 68 68 68 68 68 68 68 68 68 40 to +85 0 to 70 40 to +85 0 to 70 40 to +85 0 to 70 40 to +85 0 to 70 40 to +85 0 to 70 2 SPIs, PPI, 2 SPORTs, 2 UARTs, CAN, 2 PWMs, ADC control module, 4 MB parallel flash, 12-bit ADC 2 SPIs, PPI, 2 SPORTs, 2 UARTs, CAN, 2 PWMs, ADC control module, 4 MB parallel flash Key Peripherals 2 SPIs, PPI, 2 SPORTs, 2 UARTs, CAN, 2 PWMs, ADC control module Package 88-lead LFCSP 88-lead LFCSP 88-lead LFCSP 88-lead LFCSP 88-lead LFCSP 88-lead LFCSP 120-lead LQFP E-Pad 120-lead LQFP E-Pad 120-lead LQFP E-Pad 120lead LQFP E-Pad 5.18 to 13.782 Price Range @1k ($U.S.)1

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade.
2

Pricing is subject to change. Please contact ADI for further information.

Z = RoHS compliant part.

28

Embedded Processors and DSP Selection Guide

ADSP-BF512/ADSP-BF514/ADSP-BF516/ADSP-BF518 Blackfin Processors

Low Power with Advanced Embedded Connectivity
The Blackfin processor family is extended further into the industrial and instrumentation market by the introduction of the ADSP-BF51x family, which offers the availability of an on-chip eMAC that supports IEEE 1588 (version 2), a 3-phase PWM generation unit, and a quadrature encoder. The high performance 16-/32-bit Blackfin embedded processor core, the flexible cache architecture, the enhanced DMA subsystem, and the dynamic power management (DPM) functionality allow system designers a flexible platform to address a wide range of connected applications, including motor control, power line monitoring, biometrics, pro-audio, and femtocells. The embedded eMAC of the ADSP-BF518F is fully compliant with the IEEE 1588 standard, version 2. With the time stamping mechanism being on the processor, users are free to chose any PHY they want to implement a 1588-based system. This, coupled with a 400 MHz CPU and a plethora of other peripherals, makes the ADSP-BF51x the most attractive choice for demanding network connected systems. The VoIP challenge to the embedded system designer is to choose a processing solution that is cost-effective, easy to deploy, and scalable in performance across market spaces. A sweet spot embedded solution approach is to design with a platform that can implement a low channel count basic VoIP solution yet retain sufficient capacity for value added capabilities and servicessuch as video, music, imaging, and system control. Unlike traditional VoIP embedded solutions that utilize two processor cores to provide VoIP functionality, the ADSP-BF516 and ADSP-BF518 provide a convergent solution in a unified core architecture that allows voice and video signal processing concurrent with RISC MCU processing to handle network and user-interface demands. This unique ability to offer full VoIP functionality on a single convergent processor provides for a unified software development environment, faster system debugging and deployment, and lower overall system cost. IP protection has become a necessary part of todays embedded computing applications. The ADSP-BF51x products provide a security scheme that balances flexibility and upgradeability with performance through the inclusion of a firmware-based solution including OTP (one-time programmable) memory to enable users to implement private keys for secure access to program code. Features Blackfin processor core with up to 400 MHz (800 MMACS) performance 2 dual-channel, full-duplex synchronous serial ports supporting 8 stereo I2S channels 12 peripheral DMA channels supporting one- and two-dimensional data transfers Ethernet 10/100 MII interface with IEEE 1588 v2 support Connectivity: SDIO, CE-ATA, eMMC, UARTs, SPORTs, SPI and TWI Lockbox Secure Technology: hardware-enabled security for code and content protection Memory controller providing glueless connection to multiple banks of external SDRAM, SRAM, flash, or ROM 176-lead, 0.5 mm pitch, 24 mm 24 mm LQFP 168-ball, 0.8 mm pitch, 12 mm 12 mm CSP_BGA Applications Biometric systems Consumer audio Games/learning aids Industrial and instrumentation Portable test equipment PMPs Wi-Fi devices Cameras Medical devices VoIP Industrial control Motor control Networked audio Femtocells

ADSP-BF51x Block Diagram

SYSTEM CONTROL BLOCKS EMULATOR TEST AND CONTROL 8kB OTP SECURITY EVENT CONTROLLER WATCHDOG TIMER MEMORY DMA REAL-TIME CLOCK PLL

BLACKFIN PROCESSOR CORE 4MB SPI/FLASH

48kB INST. SRAM 32kB SRAM/ CACHE 16kB

64kB DATA SRAM 32kB SRAM/ CACHE 32kB

SCRATCHPAD SRAM 4kB

16-BIT SDRAM/ASYNC

SYSTEM INTERFACE UNIT L1 MEMORY

PERIPHERAL BLOCKS UARTO1, SPORT01, SPIO1, TIMERS07, PPI (16-BIT), SDIO/CE-ATA, PWM UNIT (3 PAIRS), ROTARY 40 GPIOs ETHERNET MAC IEEE 1588 TWI

www.analog.com/processors

29

ADSP-BF512/ADSP-BF514/ADSP-BF516/ADSP-BF518 Blackfin Processors

Low Power with Advanced Embedded Connectivity
Max (MHz) 300 400 300 400 300 400 300 400 400 400 400 400 300 400 300 400 300 400 300 400 400 400 400 400 300 400 300 400 300 400 300 400 400 400 400 400 400 400 400 400 Max (MMACS) 600 800 600 800 600 800 600 800 800 800 800 800 600 800 600 800 600 800 600 800 800 800 800 800 600 800 600 800 600 800 600 800 800 800 800 800 800 800 800 800 L1 Memory (kB) 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116

Part Number ADSP-BF512BBCZ-3 ADSP-BF512BBCZ-4 ADSP-BF512BSWZ-3 ADSP-BF512BSWZ-4 ADSP-BF512KBCZ-3 ADSP-BF512KBCZ-4 ADSP-BF512KSWZ-3 ADSP-BF512KSWZ-4 ADSP-BF512BBCZ-4F4 ADSP-BF512BSWZ-4F4 ADSP-BF512KBCZ-4F4 ADSP-BF512KSWZ-4F4 ADSP-BF514BBCZ-3 ADSP-BF514BBCZ-4 ADSP-BF514BSWZ-3 ADSP-BF514BSWZ-4 ADSP-BF514KBCZ-3 ADSP-BF514KBCZ-4 ADSP-BF514KSWZ-3 ADSP-BF514KSWZ-4 ADSP-BF514BBCZ-4F4 ADSP-BF514BSWZ-4F4 ADSP-BF514KBCZ-4F4 ADSP-BF514KSWZ-4F4 ADSP-BF516BBCZ-3 ADSP-BF516BBCZ-4 ADSP-BF516BSWZ-3 ADSP-BF516BSWZ-4 ADSP-BF516KBCZ-3 ADSP-BF516KBCZ-4 ADSP-BF516KSWZ-3 ADSP-BF516KSWZ-4 ADSP-BF516BBCZ-4F4 ADSP-BF516BSWZ-4F4 ADSP-BF516KBCZ-4F4 ADSP-BF516KSWZ-4F4 ADSP-BF518BBCZ-4 ADSP-BF518BSWZ-4 ADSP-BF518BBCZ-4F4 ADSP-BF518BSWZ-4F4

Ambient Temperature Range (C) 40 to +85 40 to +85 40 to +85 40 to +85 0 to 70 0 to 70 0 to 70 0 to 70 40 to +85 40 to +85 0 to 70 0 to 70 40 to +85 40 to +85 40 to +85 40 to +85 0 to 70 0 to 70 0 to 70 0 to 70 40 to +85 40 to +85 0 to 70 0 to 70 40 to +85 40 to +85 40 to +85 40 to +85 0 to 70 0 to 70 0 to 70 0 to 70 40 to +85 40 to +85 0 to 70 0 to 70 40 to +85 40 to +85 40 to +85 40 to +85

Key Peripherals

Package 168-ball CSP_BGA 168-ball CSP_BGA 176-lead LQFP 176-lead LQFP 168-ball CSP_BGA 168-ball CSP_BGA 176-lead LQFP 176-lead LQFP 168-ball CSP_BGA 176-lead LQFP 168-ball CSP_BGA 176-lead LQFP 168-ball CSP_BGA 168-ball CSP_BGA 176-lead LQFP 176-lead LQFP 168-ball CSP_BGA 168-ball CSP_BGA 176-lead LQFP 176-lead LQFP 168-ball CSP_BGA 176-lead LQFP 168-ball CSP_BGA 176-lead LQFP 168-ball CSP_BGA 168-ball CSP_BGA 176-lead LQFP 176-lead LQFP 168-ball CSP_BGA 168-ball CSP_BGA 176-lead LQFP 176-lead LQFP 168-ball CSP_BGA 176-lead LQFP 168-ball CSP_BGA 176-lead LQFP 168-ball CSP_BGA 176-lead LQFP

Price Range @ 1k ($U.S.)1

PPI, 2 SPIs, 2 SPORTs, TWI, 2 UARTs

6.26 to 10.31

PPI, 2 SPIs, 2 SPORTs, TWI, 2 UARTs, SPI flash

PPI, 2 SPIs, 2 SPORTs, TWI, 2 UARTs, SDIO, CE-ATA, eMMC

7.77 to 10.88

PPI, 2 SPIs, 2 SPORTs, TWI, 2 UARTs, SDIO, CE-ATA, eMMC, SPI flash

PPI, 2 SPIs, 2 SPORTs, TWI, 2 UARTs, 10/100 Ethernet, SDIO, CE-ATA, eMMC

8.92 to 12.03

PPI, 2 SPIs, 2 SPORTs, TWI, 2 UARTs, 10/100 Ethernet, SDIO, CE-ATA, eMMC, SPI flash PPI, 2 SPIs, 2 SPORTs, TWI, 2 UARTs, 10/100 Ethernet with 1588, SDIO, CE-ATA, eMMC, SPI flash PPI, 2 SPIs, 2 SPORTs, TWI, 2 UARTs, 10/100 Ethernet with 1588, SDIO, CE-ATA, eMMC

13.07 to 14.45 168-ball CSP_BGA 176-lead LQFP

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Z = RoHS compliant part.

30

Embedded Processors and DSP Selection Guide

ADSP-BF522/ADSP-BF523/ADSP-BF524/ADSP-BF525/ADSP-BF526/ADSP-BF527 Blackfin Processors

Low Power with Advanced Peripherals
The ADSP-BF52x Blackfin processor family combines high performance, power efficiency, and system integration to enable highly optimized designs without compromises. With built-in peripheral selectivity, the ADSP-BF52x family provides the greatest flexibility for todays most demanding convergent signal processing applications. With power consumption as low as 0.16 mW/MHz1 and performance up to 600 MHz, applications can now add greater signal processing performance without sacrificing battery life. The ADSP-BF52x family supports peripheral flexibility and system scalability to enable developers to create products that fit their target needs. The high performance 16-bit Blackfin embedded processor core, the flexible cache architecture, the enhanced DMA subsystem, and the dynamic power management (DPM) functionality allow system designers a flexible platform to address a wide range of portable applications, including consumer, communications, and industrial/ instrumentation. IP protection has become a necessary part of todays embedded computing applications. The ADSP-BF52x family provides a security scheme that balances flexibility and upgradeability with performance through the inclusion of a firmware-based solution including OTP (one-time programmable) memory to enable users to implement private keys for secure access to program code.
1

Applications VoIP Multimedia Multimedia accessories Home audio/video Instrumentation Imaging Industrial control PMP Mobile TV Coprocessor applications Networked audio Biometric systems Consumer audio Handheld and portable devices

ADSP-BF527 Block Diagram

SYSTEM CONTROL BLOCKS TEST AND EMULATE INTERRUPT CONTROLLER WATCHDOG TIMER REAL-TIME CLOCK PLL AND POWER MANAGEMENT 8kB OTP

Referenced at 250 MHz operating speed for 300 MHz and 400 MHz ADSP-BF52x parts only.

Features Lockbox technology: hardware-enabled security for code and content Blackfin processor core with up to 600 MHz (1200 MMACS) performance 2 dual-channel, full-duplex synchronous serial ports supporting 8 stereo I2S channels 12 peripheral DMA channels supporting one- and two-dimensional data transfers NAND flash controller with 8-/16-bit interface for commands, addresses, and data Connectivity: HS USB OTG, host DMA port, UARTs, SPORTs, SPI, and TWI Ethernet 10/100 MII/RMII interface Memory controller providing glueless connection to multiple banks of external SDRAM, SRAM, flash, or ROM Wide range of operating voltages 289-ball, 12 mm 12 mm, 0.5 mm pitch CSP_BGA (commercial temperature range 0C to 70C) 208-ball, 17 mm 17 mm, 0.8 mm pitch CSP_BGA (industrial temperature range 45C to +85C) For space-constrained audio applications, the ADSP-BF52xC supports an embedded low power stereo codec
TWI, TMRO7, CNT, SPORT01, UARTO1, SPI0, PPI HS USB 2.0 OTG 48 GPIOs EBIU

UP TO 600MHz BLACKFIN PROCESSOR CORE

SDRAM CONTROLLER

INSTRUCTION MEMORY 48kB SRAM 16kB SRAM/CACHE L1 MEMORY

DATA MEMORY 32kB + 4kB DATA SRAM 32kB SRAM/CACHE

MEMORY CONTROLLER

OPTIONAL CODEC

DMA CONTROLLER

ETHERNET 10/100 NAND/HOST

www.analog.com/processors

31

ADSP-BF522/ADSP-BF523/ADSP-BF524/ADSP-BF525/ADSP-BF526/ADSP-BF527 Blackfin Processors

Low Power with Advanced Peripherals
Part Number 1 ADSPBF522BBCZ3A ADSP-BF522BBCZ-4A ADSP-BF522KBCZ-3 ADSP-BF522KBCZ-3C23 ADSP-BF522KBCZ-4 ADSP-BF522KBCZ-4C23 ADSP-BF523BBCZ-5A ADSP-BF523KBCZ-5 ADSP-BF523KBCZ-5C23 ADSP-BF523KBCZ-6 ADSP-BF523KBCZ-6A ADSP-BF523KBCZ-6C23 ADSP-BF524BBCZ-3A ADSP-BF524BBCZ-4A ADSP-BF524KBCZ-3 ADSP-BF524KBCZ-3C23 ADSP-BF524KBCZ-4 ADSP-BF524KBCZ-4C23 ADSP-BF525BBCZ-5A ADSP-BF525KBCZ-5 ADSP-BF525KBCZ-5C23 ADSP-BF525KBCZ-6 ADSP-BF525KBCZ-6A ADSP-BF525KBCZ-6C23 ADSP-BF526BBCZ-3A ADSP-BF526BBCZ-4A ADSP-BF526KBCZ-3 ADSP-BF526KBCZ-3C23 ADSP-BF526KBCZ-4 ADSP-BF526KBCZ-4C23 ADSP-BF527BBCZ-5A ADSP-BF527KBCZ-5 ADSP-BF527KBCZ-5C23 ADSP-BF527KBCZ-6 ADSP-BF527KBCZ-6A ADSP-BF527KBCZ-6C23 Max (MHz) 300 400 300 300 400 400 533 533 533 600 600 600 300 400 300 300 400 400 533 533 533 600 600 600 300 400 300 300 400 400 533 533 533 600 600 600 Max (MMACS) 600 800 600 600 800 800 1066 1066 1066 1200 1200 1200 600 800 600 600 800 800 1066 1066 1066 1200 1200 1200 600 800 600 600 800 800 1066 1066 1066 1200 1200 1200 L1 Memory (kB) 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 Ambient Temperature Range (C) 40 to +85 40 to +85 0 to 70 0 to 70 0 to 70 0 to 70 40 to +85 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 40 to +85 40 to +85 0 to 70 0 to 70 0 to 70 0 to 70 40 to +85 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 40 to +85 40 to +85 0 to 70 0 to 70 0 to 70 0 to 70 40 to +85 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 Key Peripherals Package 208-ball CSP_BGA 208-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 208-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 208-ball CSP_BGA 289-ball CSP_BGA 208-ball CSP_BGA 208-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 208-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 208-ball CSP_BGA 289-ball CSP_BGA 208-ball CSP_BGA 208-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 208-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 289-ball CSP_BGA 208-ball CSP_BGA 289ball CSP_BGA 8.18 to 12.044 Price Range @ 1k ($U.S.)2

PPI, SPI, 2 SPORTs, NAND interface, TWI, host DMA, 2 UARTs, Lockbox

13.46 to 19.24

9.58 to 13.744

PPI, SPI, 2 SPORTs, NAND interface, TWI, host DMA, 2 UARTs, Lockbox, HS USB OTG

15.17 to 21.00

10.76 to 15.534

PPI, SPI, 2 SPORTs, 10/100 Ethernet, TWI, host DMA, NAND interface, 2 UARTs, Lockbox, HS USB OTG

16.99 to 22.89

NOTES 1 Certain models available in automotive grade.

2

Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Stereo audio codec available.

3 4

Pricing is subject to change. Please contact ADI for further information. Z = RoHS compliant part.

32

Embedded Processors and DSP Selection Guide

ADSP-BF542/ADSP-BF544/ADSP-BF547/ADSP-BF548 Blackfin Processors

High Performance Convergent Multimedia Processors
The ADSP-BF54x family was specifically designed to meet the needs of convergent multimedia applications where system performance and cost are essential ingredients. The integration of multimedia, human interface, and connectivity peripherals combined with increased system bandwidth and on-chip memory provides customers a platform to design the most demanding applications. IP protection has become a necessary part of todays embedded applications. The ADSP-BF54x provides a security scheme that balances flexibility and upgradeability with performance through the inclusion of a firmware-based solution including OTP memory to enable users to implement private keys for secure access to program code. The ADSP-BF54x provides peripheral flexibility to complement its high performance processing. These rich system-level peripherals are well-suited for industrial multimedia and automotive infotainment applications where multiple standards are prevalent and system performance is required. Features Powerful and flexible cache architecture suitable for soft real-time control tasks and industry-standard operating systems, plus hard real-time signal processing tasks Blackfin processor core with up to 600 MHz (1200 MMACS) performance Lockbox Secure Technology Two independent DMA controllers Human interface: 18-/24-bit LCD controller, 32-bit up/down counter/ thumbwheel interface, 8 8 keypad interface Connectivity: high speed USB on-the-go (OTG) controller, host DMA, UARTs, SPORTs, SPI, TWI, and CAN (not available on ADSP-BF547) Expansion: SD/SDIO and ATAPI controllers Multimedia: 18-/24-bit LCD controller, multiple enhanced parallel peripheral interfaces (EPPI), pixel compositor hardware accelerator Asynchronous memory interface for SRAM, EEPROM, NAND/NOR flash connectivity Synchronous memory interface for DDR or Mobile DDR connectivity Core voltage: 0.9 V to 1.43 V
64kB INST. SRAM 48kB SRAM/ CACHE 16kB

Applications Digital radio Audio jukebox Navigation Driver assistance Rear seat audio and video Advanced vehicle infotainment Mobile communications Security and access control systems Industrial control and factory automation Automotive driver assistance/safety Telecommunications radio and switches Security and access control systems Factory/building automation Automotive multimedia device interconnect PC peripherals POS barcode scanners

ADSP-BF54x Block Diagram

SYSTEM CONTROL BLOCKS EMULATOR AND TEST CONTROL OTP SECURITY EVENT CONTROLLER WATCHDOG TIMER MEMORY DMA REAL-TIME CLOCK PLL VOLTAGE REGULATOR

BLACKFIN PROCESSOR CORE

16-BIT DDR EXT. MEMORY ASYNC/NAND ATAPI HS USB OTG

64kB DATA SRAM 32kB SRAM/ CACHE 32kB

SCRATCHPAD SRAM

INST./DATA SRAM

4kB

128kB

MXVR

SYSTEM INTERFACE UNIT L1 MEMORY L2 MEMORY

SD/ SDIO

GPIO

PERIPHERAL BLOCKS SPORTs-4, UARTs-4, SPIs-3, TIMERS-8 GPIO (WITH 8 8 KEYPAD AND THUMBWHEEL)

PIXEL COMP EPPIO/LCD GPIO

HOST DMA EPPI1 GPIO

2 TWIs

2 CANs

MXVR AVAILABLE ON ADSP-BF549 AUTOMOTIVE PARTS ONLY. NOTE PLEASE REFER TO INDIVIDUAL DATA SHEETS FOR SPECIFIC BLOCK DIAGRAMS.

www.analog.com/processors

33

ADSP-BF542/ADSP-BF544/ADSP-BF547/ADSP-BF548 Blackfin Processors

High Performance Convergent Multimedia Processors
Part Number 1, 2 ADSP-BF542BBCZ-4A ADSP-BF542BBCZ-5A ADSP-BF542MBBCZ-5M ADSP-BF542KBCZ-6A ADSP-BF544BBCZ-4A ADSP-BF544BBCZ-5A ADSP-BF544MBBCZ-5M ADSP-BF547BBCZ-5A ADSP-BF547MBBCZ-5M ADSP-BF547KBCZ-6A ADSP-BF548BBCZ-5A ADSP-BF548MBBCZ-5M
NOTES 1 Certain models available in automotive grade.
2 3

Max (MHz) 400 533 533 600 400 533 533 533 533 600 533 533

Max (MMACS) 800 1066 1066 1200 800 1066 1066 1066 1066 1200 1066 1066

L1/L2 Memory (kB) 132/ 132/ 132/ 132/ 132/64 132/64 132/64 132/128 132/128 132/128 132/128 132/128

Ambient Temperature Range (C) 40 to +85 40 to +85 40 to +85 0 to 70 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 0 to 70 40 to +85 40 to +85

Key Peripherals CAN, HS USB OTG, 3 EPPIs, pixel comp, ATAPI-6, Lockbox CAN, Host DMA, 3 EPPIs, pixel comp, Lockbox HS USB OTC, 3 EPPIs, pixel comp, ATAPI-6, Lockbox HS USB OTG, 3 EPPIs, pixel comp, ATAPI-6, Lockbox, CAN

Package 400-ball CSP_BGA 400-ball CSP_BGA 400-ball CSP_BGA 400-ball CSP_BGA 400-ball CSP_BGA 400-ball CSP_BGA 400-ball CSP_BGA 400-ball CSP_BGA 400-ball CSP_BGA 400-ball CSP_BGA 400-ball CSP_BGA

Price Range @ 1k ($U.S.)3

15.66 to 19.14

16.56 to 18.40

20.11 to 22.12

20.71 400-ball CSP_BGA

Products without an M support standard DDR memory only. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade.

M = support for 1.8 V mobile DDR memory. Z = RoHS compliant part.

34

Embedded Processors and DSP Selection Guide

ADSP-BF538/ADSP-BF538F Blackfin Processors

Embedded and Integrated Development
The Blackfin processor family has been expanded to address the ever increasing need for more connection possibilities with two new family members. This connectivity is coupled with the high performance 16-/32-bit Blackfin embedded processor core, the flexible cache architecture, the enhanced DMA subsystem, and the dynamic power management (DPM) functionality. System designers can take advantage of the combined control and signal processing capabilities of the processor core across a wide range of end applications through code compatibility of these new family members with existing Blackfin offerings. The ADSP-BF538 and ADSP-BF538F are functional extensions of the popular ADSP-BF533 processor (found on Page 42), and they are ideally suited for applications with multiple device connections. The ADSP-BF538 offers equivalent embedded memory and is well-suited for applications such as video security/surveillance and industrial-environment-based distributed control/factory automation applications. The ADSP-BF538F is equivalent in functionality to the ADSP-BF538 processor with the addition of on-board flash memory. Both devices are ideally suited for a broad range of industrial, instrumentation, and medical appliance applicationsallowing for broad connection possibilities coupled with a mix of control and signal processing needs based in the end product. Features Powerful and flexible cache architecture suitable for soft real-time control tasks and industry-standard operating systems, plus hard real-time signal processing tasks Addition of on-board flash memory for code storage of complex system application that run on a powerful 400 MHz or 533 MHz processor Application-tuned peripherals provide glueless connectivity to generalpurpose converters in data acquisition applications Enhanced dynamic power management with on-chip voltage regulation 10-stage RISC MCU/DSP pipeline with mixed 16-/32-bit ISA for optimal code density Full SIMD architecture, including instructions for accelerated video and image processing Memory management unit (MMU) supporting full memory protection for an isolated and secure environment More SPORT, UART, SPI, and TWI peripherals over the popular ADSP-BF533 processor Controller area network (CAN) 2.0B interface Enhanced DMA controller for high bandwidth throughput accommodating multiple peripherals 148 kB on-chip full-speed SRAM Glueless SDRAM, SRAM, and flash controllers
REAL-TIME CLOCK DYNAMIC POWER MANAGEMENT PLL

ADSP-BF538/ADSP-BF538F Block Diagram

SYSTEM CONTROL BLOCKS EMULATOR AND TEST CONTROL VOLTAGE REGULATION EVENT CONTROLLER WATCHDOG TIMER MEMORY DMA

1 MB of flash memory on ADSP-BF538F devices Glueless video capture/display port 316-ball, lead-free CSP_BGA package Core voltage: 0.8 V to 1.375 V Industrial temperature range Multiple pin- and code-compatible derivatives Applications Video security/surveillance Industrial Instrumentation Medical appliances

BLACKFIN CORE UP TO 500MHz

HIGH SPEED I/O 16-BIT BUS INTERFACE OPTIONAL FLASH MEMORY

80kB INSTRUCTION SRAM/CACHE

64kB DATA SRAM/CACHE

4kB SCRATCHPAD SRAM

SYSTEM INTERFACE UNIT L1 MEMORY

SPORT23, UART12, TIMERS02, SPI02, PPI, CAN2.0B GPIO

SPORT0-1

TWI0-1

UART0 PERIPHERAL BLOCKS

Part Number 1 ADSP-BF538BBCZ-4A ADSP-BF538BBCZ-4F8 ADSP-BF538BBCZ-5A ADSP-BF538BBCZ-5F8

Max (MHz) 400 400 533 533

Max (MMACS) 800 800 1066 1066

L1 Memory (kB) 148 148 148 148

Flash Memory (Bytes) 1M 1M

Ambient Temperature Range (C) 40 to +85 40 to +85 40 to +85 40 to +85

Key Peripherals

Package 316-ball CSP_BGA

Price Range @ 1k ($U.S.)2

CAN 2.0B, 54 GPIOs, 4 SPORTs, 3 UARTs, 3 SPIs, 2 TWIs, PPI, 8 MB flash

316-ball CSP_BGA 16.03 to 20.67 316-ball CSP_BGA 316-ball CSP_BGA

NOTES 1 Certain models available in automotive grade.

2

Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade.

Z = RoHS compliant part.

www.analog.com/processors

35

ADSP-BF536/ADSP-BF537 Blackfin Processors

Embedded Network Connectivity
The Blackfin processor family addresses the ever increasing need for pervasive embedded network connectivity with the ADSP-BF536/ADSP-BF537. This connectivity is powerful when utilized in conjunction with the high performance 16-/32-bit Blackfin embedded processor core, the flexible cache architecture, the enhanced DMA subsystem, and the dynamic power management (DPM) functionality. System designers can take advantage of the combined control and signal processing capabilities of the processor core across a wide range of end applications through the scalability of the pin and code compatibility of these new family members. The ADSP-BF536 and ADSP-BF537 are a functional extension of the popular ADSP-BF531, ADSP-BF532, and ADSP-BF533 processors (found on Page 40 to Page 42), and they are ideally suited for a variety of networked applications. ADSP-BF536/ADSP-BF537 processors also embed a controller area network (CAN) module and are capable of data rates of up to 1 Mbps. Features Up to 600 MHz operation Embedded IEEE 802.3 2002 compliant 10/100 Ethernet MAC and buffered oscillator output to a separate PHY Controller area network (CAN) 2.0B interface I2C-compatible 2-wire interface Enhanced DMA controller, including two external handshake DMA request lines Up to 132 kB on-chip, full-speed SRAM Glueless SDRAM, SRAM, and flash controllers Glueless video capture/display port 182-ball and 208-ball CSP_BGA packages Lead-free and lead-bearing package options Industrial temperature ranges Core voltage: 0.8 V to 1.4 V Applications Video security Video surveillance Industrial distributed control Industrial factory automation Remote monitoring devices Point-of-sale terminals VoIP Biometrics/security Instrumentation Medical appliances Consumer appliances

Designed for Endpoint Connectivity

The Blackfin processor core is ideally suited for handling both controloriented networking tasks and user interface mechanisms while also offering full signal processing capabilities for analyzing almost any condition. To complement the performance, the Blackfin processors memory system offers a powerful and flexible cache architecture that can dynamically balance between the hard real-time tasks desired in SRAM, the soft real-time control tasks, and an operating system (OS) requiring cache functionality. DPM lowers power consumption for extending battery life or for minimizing power dissipation in enclosed applications.

Designed for Bandwidth

The ADSP-BF536/ADSP-BF537 processors integrate a fully compliant IEEE 802.3-2002 standard 10/100 Ethernet MAC that has been enhanced with advanced features to allow for higher network bandwidth capabilities. In addition, the DMA subsystem has been enhanced with greater traffic management abilities to allow for higher data throughput with minimal processor core intervention. The DMA subsystem also includes dual external handshake DMA request lines that, when used in conjunction with the external bus interface unit (EBIU), can be used when a high speed interface is required for external FIFOs and high bandwidth communication peripherals, such as USB 2.0 devices. The

36

Embedded Processors and DSP Selection Guide

ADSP-BF536/ADSP-BF537 Blackfin Processors

Embedded Network Connectivity
ADSP-BF536/ADSP-BF537 Block Diagram
SYSTEM CONTROL BLOCKS JTAG DYNAMIC POWER MANAGEMENT EVENT CONTROLLER WATCHDOG TIMER MEMORY DMA EXTERNAL DMA REQUEST RTC PLL

BLACKFIN PROCESSOR CORE EBIU

64kB INSTRUCTION SRAM/CACHE

UP TO 64kB DATA SRAM/CACHE

4kB SCRATCHPAD RAM

10/100 16 ETHERNET GPIOs MAC

SYSTEM INTERFACE UNIT L1 MEMORY

SPORT1, UARTO1, SPIO, TIMERO7, PPI 32 GPIOs

SPORTO

TWI

CAN PERIPHERAL BLOCKS

Part Number ADSP-BF536BBC-3A ADSP-BF536BBCZ-3A ADSP-BF536BBCZ-3B ADSP-BF536BBC-4A ADSP-BF536BBCZ-4A ADSP-BF536BBCZ-4B ADSP-BF537BBC-5A ADSP-BF537BBCZ-5A ADSP-BF537BBCZ-5B ADSP-BF537BBCZ-5AV ADSP-BF537BBCZ-5BV ADSP-BF537KBCZ-6AV ADSP-BF537KBCZ-6BV

Max (MHz) 300 300 300 400 400 400 500 500 500 533 533 600 600

Max (MMACS) 600 600 600 800 800 800 1000 1000 1000 1066 1066 1200 1200

L1 Memory (kB) 100 100 100 100 100 100 132 132 132 132 132 132 132

Ambient Temperature Range (C) 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 0 to 70 0 to 70

Key Peripherals

Package 182-ball CSP_BGA 182-ball CSP_BGA 208-ball CSP_BGA 182-ball CSP_BGA 182-ball CSP_BGA 208-ball CSP_BGA 182-ball CSP_BGA 182-ball CSP_BGA 208-ball CSP_BGA 182-ball CSP_BGA 208-ball CSP_BGA 182-ball CSP_BGA 208-ball CSP_BGA

Price Range @ 1k ($U.S.)1

10.07 to 15.14

10/100 Ethernet, CAN, PPI, TWI, 8 timers, 48 GPIOs, 2 SPORTs/ 2 UARTs, SPI

17.15 to 21.20

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Z = RoHS compliant part.

www.analog.com/processors

37

ADSP-BF534 Blackfin Processor

CAN Connectivity for Automotive and Industrial Applications

The ADSP-BF534 is a functional extension of the popular ADSP-BF531, ADSP-BF532, and ADSP-BF533 processors (found on Page 40 to Page 42) and is ideally suited for a variety of CAN networked applications. The ADSP-BF534 offers a high performance series for embedded applications such as automotive safety, automotive body control, automotive driver assistance, automotive entertainment, and industrial factory automation. This processor is ideally suited for a broad range of industrial, instrumentation, medical applications, and fleet monitoring that allows for scalability and CAN network connectivity utilizing a mix of control plus signal processing in the end product. Features Up to 500 MHz operation Controller area network (CAN) 2.0B interface Enhanced DMA controller, including two external handshake DMA request lines 132 kB on-chip, full-speed SRAM Glueless SDRAM, SRAM, and flash controllers Glueless video capture/display port 8 timers supporting PWM and pulse width/event count modes 48 general-purpose I/Os, 8 with high source/high sink capabilities 182-ball and 208-ball sparse CSP_BGA packages Lead-free and lead-bearing package options Industrial and extended industrial temperature ranges Core voltage: 0.8 V to 1.2 V Applications Automotive safety Automotive body control Automotive driver assistance Automotive entertainment Industrial factory automation Instrumentation Medical appliances Consumer appliances

Designed for Endpoint Connectivity

Embedded CAN networked applications require ever increasing intelligence and analytical capabilities for endpoint decision making. The Blackfin processor core is ideally suited for handling both control-oriented networking tasks and user interface mechanisms while also offering full signal processing capabilities for analyzing almost any condition. To complement the performance, the Blackfin processors memory system offers a powerful and flexible cache architecture that can dynamically balance the hard real-time tasks desired in SRAM, the soft real-time control tasks, and an operating system (OS) requiring cache functionality. Dynamic power management (DPM) lowers power consumption for extending battery life or for minimizing power dissipation in enclosed applications. DPM allows for independent dynamic scaling of either voltage or frequency in a self-contained system with the integration of both a voltage regulator and PLL that are software programmable.

ADSP-BF534 Block Diagram

SYSTEM CONTROL BLOCKS JTAG DYNAMIC POWER MANAGEMENT EVENT CONTROLLER WATCHDOG TIMER MEMORY DMA EXTERNAL DMA REQUEST RTC PLL

Designed for Bandwidth

The ADSP-BF534 integrates a fully compliant CAN 2.0B module capable of data rates of up to 1 Mbps. This module supports up to 32 mailboxes with individual acceptance masks and data filtering. In addition, the DMA subsystem has been enhanced with greater traffic management abilities to allow for higher data throughput with minimal processor core intervention. The DMA subsystem also includes dual external handshake DMA request lines that, when used in conjunction with the external bus interface unit (EBIU), can be used when a high speed interface is required for external FIFOs and high bandwidth communication peripherals, such as USB 2.0 devices.

BLACKFIN PROCESSOR CORE EBIU

64kB INSTRUCTION SRAM/CACHE

64kB DATA SRAM/CACHE

4kB SCRATCHPAD RAM

16 GPIOs

SYSTEM INTERFACE UNIT L1 MEMORY

SPORT1, UARTO1, SPIO, TIMERO7, PPI 32 GPIOs

SPORTO

TWI

CAN PERIPHERAL BLOCKS

Part Number 1 ADSP-BF534BBC-4A ADSP-BF534BBCZ-4A ADSP-BF534BBCZ-4B ADSP-BF534BBC-5A ADSP-BF534BBCZ-5A ADSP-BF534BBCZ-5B ADSP-BF534YBCZ-4B

2

Max (MHz) 400 400 400 500 500 500 400

Ambient Temperature Max L1 Key Peripherals Range (C) (MMACS) Memory (kB) 800 132 40 to +85 800 132 40 to +85 CAN, PPI/SPI, 800 132 40 to +85 TWI, 8 timers, 1000 132 40 to +85 48 GPIOs, 1000 132 40 to +85 2 SPORTs/UARTs 1000 132 40 to +85 800 132 0 to 70

Package 182-ball CSP_BGA 182-ball CSP_BGA 208-ball CSP_BGA 182-ball CSP_BGA 182-ball CSP_BGA 208-ball CSP_BGA 208-ball CSP_BGA

Price Range @ 1k ($U.S.)2

12.40 to 18.53

NOTES 1 Certain models available in automotive grade. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade.

Z = RoHS compliant part.

38

Embedded Processors and DSP Selection Guide

ADSP-BF561 Blackfin Processor

Symmetric Multiprocessing
The Blackfin processor family expands the performance envelope with the introduction of the ADSP-BF561 configured as a symmetric multiprocessing arrangement of two Blackfin processor cores. The ADSP-BF561 offers twice the signal processing performance of the ADSP-BF533 (found on Page 42), with more than twice the on-chip memory and significantly increased data bandwidth capability. The ADSP-BF561 retains full code compatibility with the ADSP-BF533 and still maintains very low power consumption by using the dynamic power management capabilities of the Blackfin architecture. The ADSP-BF561 integrates two Blackfin processor cores, each capable of operating at up to 600 MHz, and 2.6 Mb of on-chip SRAM memory. The on-chip memory is portioned between individual, high speed L1 memory for each core and a large 128 kB bank of shared L2 memory. Extremely high data bandwidth is provided by the 32-bit external port and dual 16-channel DMA controllers. On-chip peripherals include dual parallel peripheral interfaces (PPIs), each with support for ITU-R 656 video formatting and high speed serial ports supporting I2S formats. The product is optimized for a variety of consumer multimedia and other processing intensive applications. Features Dual Blackfin cores with each core capable of 600 MHz/1200 MMACS (2400 MMACS total) Large on-chip memory of 328 kBarranged as individual L1 memory systems for each core, plus a shared L2 memory space High data throughput tailored for the needs of imaging and consumer multimedia applications Application-tuned peripherals provide glueless connectivity to a variety of audio/video converters and general-purpose ADCs/DACs Core voltage: 0.8 V to 1.4185 V Part Number 1 ADSP-BF561SBB500 ADSP-BF561SBBZ500 ADSP-BF561SBBCZ-5A ADSP-BF561SKB500 ADSP-BF561SKBZ500 ADSP-BF561SKBCZ500 ADSP-BF561SKBCZ-5A ADSP-BF561SKBCZ-5V ADSP-BF561SBB600 ADSP-BF561SBBZ600 ADSP-BF561SKB600 ADSP-BF561SKBZ600 ADSP-BF561SKBCZ-6A ADSP-BF561SKBCZ-6V
2

Applications Digital still cameras Digital video cameras Portable media players Digital video recorders Set-top boxes Consumer multimedia Automotive vision systems Broadband wireless systems Instrumentation Security and surveillance

ADSP-BF561 Block Diagram

SYSTEM CONTROL BLOCKS INTERRUPT CONTROLLER/ TIMER WATCHDOG TIMER INTERRUPT CONTROLLER/ TIMER WATCHDOG TIMER CLOCK AND POWER MGMT CNTL (PLL) JTAG TEST AND EMULATION UART0 IrDA

BLACKFIN PROCESSOR CORE

BLACKFIN PROCESSOR CORE

SPI 128kB SRAM SPORT0

32kB INSTRUCTION SRAM/ CACHE

64kB DATA SRAM/ CACHE

32kB INSTRUCTION SRAM/ CACHE

64kB DATA SRAM/ CACHE

SPORT1

GPI0

SYSTEM BUS INTERFACE UNIT

TIMERS PERIPHERAL BLOCKS

EXTERNAL MEMORY

PPI0

PPI1

Max (MHz) 500 500 500 500 500 500 500 533 600 600 600 600 600 600

Max (MMACS) 2000 2000 2000 2000 2000 2000 2000 2000 2400 2400 2400 2400 2400 2400

L1/L2 Memory (kB) 1003/128 1003/128 1003/128 1003/128 1003/128 1003/128 1003/128 1003/128 1003/128 1003/128 1003/128 1003/128 1003/128 1003/128

Ambient Temperature Key Peripherals Range (C) 40 to +85 40 to +85 40 to +85 0 to 70 0 to 70 2 PPIs, UART, 0 to 70 12 timers, 0 to 70 2 SPORTs 0 to 70 40 to +85 40 to +85 0 to 70 0 to 70 0 to 70 0 to 70

Package 297-ball PBGA 297-ball PBGA 256-ball CSP_BGA 297-ball PBGA 297-ball PBGA 256-ball CSP_BGA 256-ball CSP_BGA 256-ball CSP_BGA 297-ball PBGA 297-ball PBGA 297-ball PBGA 297-ball PBGA 256-ball CSP_BGA 256-ball CSP_BGA

Price Range @ 1k ($U.S.)2

20.40 to 37.53

NOTES 1 Certain models available in automotive grade. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Per core.

Z = RoHS compliant part.

www.analog.com/processors

39

ADSP-BF531/ADSP-BF532 Blackfin Processors

Low Power General-Purpose Applications
The ADSP-BF531 and ADSP-BF532 provide a low cost, power-efficient processor choice for todays most demanding convergent signal processing applications. With power consumption as low as 0.23 mW/MHz and performance of 400 MHz, applications can now add greater signal processing performance without sacrificing battery life. The high performance 16-/32-bit Blackfin embedded processor core, the flexible cache architecture, the enhanced DMA subsystem, and the dynamic power management (DPM) functionality allow system designers a flexible platform to address a wide range of applications, including consumer, communications, automotive, and industrial/instrumentation. Features Performance to 400 MHz/800 MMACS enables multichannel audio plus CIF video processing in multimedia applications Enhanced dynamic power management with on-chip core voltage regulation allows operation to 0.8 V, extending battery life in portable applications Application-tuned peripherals provide glueless connectivity to general-purpose converters in data acquisition applications Multiple low cost, pin- and code-compatible derivatives enable software differentiation in cost-sensitive consumer applications Pin compatible with the ADSP-BF533 (found on Page 42) Core voltage: 0.8 V to 1.2 V Applications Biometric systems Consumer audio Email terminals Embedded modems Games/learning aids Information appliances Industrial control Portable test equipment Web tablets/terminals Automotive telematics Consumer multimedia Digital and satellite radio Point-of-sale terminals Medical instrumentation Professional audio Telephony and communications Video conferencing VoIP terminals

Designed for Performance and Power Efficiency

Both the ADSP-BF531 and the ADSP-BF532 offer 400 MHz performance and up to 800 MMACS. This processor core is supported by an advanced DMA controller supporting one- and two-dimensional DMA transfers between on-chip memory, off-chip memory, and system peripherals. The combination of the processor core speed and the DMA controller allows for efficient processing of audio, voice, video, and image data. Blackfin processors also offer enhanced power management capabilities by integrating on-chip core voltage regulation circuitry. This on-chip voltage regulator allows for the core and system clocks to be dynamically modified via a digital divider circuit, providing systems designers an additional tool for optimization of power and performance in their end products.

Designed for Flexibility

With multiple package and memory options, many pin-for-pincompatible, designers can choose the price point and cost point to meet their system requirements. Combined with a number of standard peripherals, including multifunction serial ports supporting I2S audio capability, UART, SPI-compatible port, three multifunction timers, and a programmable parallel port interface (PPI) with ITU-656 video support, the ADSP-BF531/ADSP-BF532 can address a wide variety of existing and emerging applications.

Designed for Low Cost

Both the ADSP-BF531 and the ADSP-BF532 were designed for costsensitive applications. By efficiently processing both control and signal processing code on a single processor, the Blackfin architecture eliminates the additional cost of having a separate digital signal processor in the system. Each product offers LQFP package options to simplify board design and peripherals like an on-chip real-time clock and voltage regulation to further reduce systems costs. The Blackfin processors combination of performance, flexibility, and low cost is ideally suited for the most demanding convergent processing applications. This processor family, combined with ADIs investment in future Blackfin products, provides a robust platform for tomorrows most challenging convergent applications.

40

Embedded Processors and DSP Selection Guide

ADSP-BF531/ADSP-BF532 Blackfin Processors

Low Power General-Purpose Applications
ADSP-BF531/ADSP-BF532 Block Diagram
SYSTEM CONTROL BLOCKS EMULATOR AND TEST CONTROL VOLTAGE REGULATION EVENT CONTROLLER CLOCK (PLL) MEMORY DMA WATCHDOG TIMER REAL-TIME CLOCK

BLACKFIN CORE UP TO 400MHz EXTERNAL MEMORY INTERFACE UP TO 48kB INSTRUCTION SRAM/CACHE 32kB DATA SRAM/CACHE 4kB SCRATCHPAD RAM HIGH SPEED I/O

SYSTEM INTERFACE UNIT PARALLEL PERIPHERAL INTERFACE/GPIO

UART

SPI

SPORT0

SPORT1

TIMERS 0/1/2

PERIPHERAL BLOCKS

Part Number 1 ADSP-BF531SBBC400 ADSP-BF531SBBCZ400 ADSP-BF531SBSTZ400 ADSP-BF531SBB400 ADSP-BF531SBBZ400 ADSP-BF532SBBC400 ADSP-BF532SBBCZ400 ADSP-BF532SBSTZ400 ADSP-BF532SBB400 ADSP-BF532SBBZ400
2

Max (MHz) 400 400 400 400 400 400 400 400 400 400

Max (MMACS) 800 800 800 800 800 800 800 800 800 800

L1 Memory (kB) 52 52 52 52 52 84 84 84 84 84

Ambient Temperature Range (C) 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85 40 to +85

Key Peripherals

Package 160-ball CSP_BGA 160-ball CSP_BGA 176-lead LQFP 169-ball PBGA 169-ball PBGA 160-ball CSP_BGA 160-ball CSP_BGA 176-lead LQFP 169-ball PBGA 169-ball PBGA

Price Range @ 1k ($U.S.)2

5.99 to 12.81

PPI, UART, SPI, 2 SPORTs, 3 timers, 16 GPIOs

9.33 to 17.31

NOTES 1 Certain models available in automotive grade. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade.

Z = RoHS compliant part.

www.analog.com/processors

41

ADSP-BF533 Blackfin Processor

High Performance General-Purpose Applications

The ADSP-BF533 provides a high performance, power-efficient processor choice for todays most demanding convergent signal processing applications. With performance up to 600 MHz (1200 MMACS), applications can now add greater signal processing performance without significantly increasing their system cost. The high performance 16-/32-bit Blackfin embedded processor core, the flexible cache architecture, the enhanced DMA subsystem and the dynamic power management (DPM) functionality allow system designers a flexible platform to address a wide range of applications, including consumer, communications, automotive, and industrial/instrumentation. products, provides a robust platform for tomorrows most challenging convergent applications. Features Up to 600 MHz performance 1200 MMACS Application-tuned peripherals provide glueless connectivity to general-purpose converters in data acquisition applications Large on-chip SRAM for maximum system performance Pin-compatible with the ADSP-BF531/ADSP-BF532 for scalable solutions Core voltage: 0.8 V to 1.45 V Applications Multimedia Home audio/video Embedded modems Instrumentation Imaging Industrial control Voice communication

Designed for Performance

The ADSP-BF533 combines the high performance Blackfin core with large on-chip Level 1 cacheable instruction and data memories. This combination allows the ADSP-BF533 to achieve very high system performance for applications such as video or multimedia. This processor core is supported by an advanced DMA controller aiding one- and twodimensional DMA transfers between on-chip memory, off-chip memory, and system peripherals. Blackfin processors also offer enhanced power management capabilities by integrating on-chip core voltage regulation circuitry. The on-chip voltage regulator and programmable PLL allow the core and system clocks to be dynamically modified via a digital divider circuit, providing systems designers an additional tool for optimization of power and performance in their end products.

ADSP-BF533 Block Diagram

SYSTEM CONTROL CLOCKS EMULATOR AND TEST CONTROL VOLTAGE REGULATION EVENT CONTROLLER CLOCK (PLL) MEMORY DMA WATCHDOG TIMER REAL-TIME CLOCK

Designed for Flexibility

With multiple package and memory options, designers can choose the price point and cost point to meet their system requirements. Combined with a number of standard peripherals, including multifunction serial ports supporting I2S audio capability, UART, SPI-compatible port, three multifunction timers, and a programmable parallel port interface (PPI) with ITU-656 video support, the ADSP-BF533 can address a wide variety of existing and emerging applications. Also, the ADSP-BF533 is codecompatible with all of the Blackfin family of processors, providing more choices and offering greater leverage across developments. The Blackfin processors combination of performance and flexibility is ideally suited for the most demanding convergent processing applications. This processor family, combined with Analog Devices investment in future Blackfin Part Number 1 ADSP-BF533SBB500 ADSP-BF533SBBC400 ADSP-BF533SBBC500 ADSP-BF533SBBC-5V ADSP-BF533SBBCZ400 ADSP-BF533SBBCZ500 ADSP-BF533SBBCZ-5V ADSP-BF533SBBZ400 ADSP-BF533SBBZ500 ADSP-BF533SBST400 ADSP-BF533SBSTZ400 ADSP-BF533SKBC-6V ADSP-BF533SKBCZ-6V
2

BLACKFIN CORE UP TO 600MHz EXTERNAL MEMORY INTERFACE 80kB INSTRUCTION SRAM/CACHE 64kB DATA SRAM/CACHE 4kB SCRATCHPAD RAM HIGH SPEED I/O

SYSTEM INTERFACE UNIT PARALLEL PERIPHERAL INTERFACE/GPIO

UART

SPI

SPORT0

SPORT1

TIMERS 0/1/2

PERIPHERAL BLOCKS

Max (MHz) 500 400 500 533 400 500 533 400 500 400 400 600 600

Max L1 Memory Ambient Temperature Key Peripherals Range (C) (MMACS) (kB) 1000 148 40 to +85 800 148 40 to +85 1000 148 40 to +85 1066 148 40 to +85 800 148 40 to +85 1000 148 40 to +85 PPI, UART, SPI, 1066 148 40 to +85 2 SPORTs, 3 timers, 16 GPIOs 800 148 40 to +85 1000 148 40 to +85 800 148 40 to +85 800 148 40 to +85 1200 148 0 to 70 1200 148 0 to 70

Package 169-ball PBGA 160-ball CSP_BGA 160-ball CSP_BGA 160-ball CSP_BGA 160-ball CSP_BGA 160-ball CSP_BGA 160-ball CSP_BGA 169-ball PBGA 169-ball PBGA 176-lead LQFP 176-lead LQFP 160-ball CSP_BGA 160-ball CSP_BGA

Price Range @ 1k ($U.S.)2

12.19 to 23.32

NOTES 1 Certain models available in automotive grade. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade.

Z = RoHS compliant part.

42

Embedded Processors and DSP Selection Guide

ADSP-BF535 Blackfin Processor

High Performance Processor for Internet Appliances

The ADSP-BF535 high performance processor features dual MACs, high clock rates, and dynamic power management, allowing for optimization of system performance and power consumption. Additionally, through the advantages of a clean, orthogonal RISC instruction set, the ADSP-BF535 is optimized for programming in high level languages (HLL) like C/C++, resulting in extremely dense code. At the heart of the Blackfin processor is ADIs most advanced 16-bit digital signal processing core architecture. This new core has three primary objectivesperformance, power management, and ease of use. Features Up to 350 MHz/700 MMACS 16-bit dual-MAC processor core Flexible, software controlled dynamic power management Enhanced media instructions for audio, image, and video multimedia applications Integrated system peripherals, including USB device, PCI, serial ports, UARTs, SPI, and timers Core voltage: 0.95 V to 1.65 V Blackfin Processors Utilize: Single processor core Single instruction set Single programming model Single set of development tools Applications Automotive applications Broadband home gateways Central office/network switch Digital imaging and printing Global positioning systems Home networking/wireless LAN Internet appliances Modem solutions PDAs and other portable handheld devices Video conferencing VoIP phone solutions Personal branch exchanges (PBX) Point-of-sale terminals Telecommunications Max (MHz) 200 300 200 300 350 300 350 Max (MMACS) 400 600 400 600 700 600 700 Ambient Temperature L1/L2 Key Peripherals Range (C) Memory (kB) 52/256 40 to +85 52/256 40 to +85 52/256 40 to +85 2 SPIs, 2 SPORTs, 52/256 0 to 70 USB device, PCI 52/256 0 to 70 52/256 0 to 70 52/256 0 to 70 Price Range @ 1k ($U.S.)1

High Performance
Blackfin processors employ a dual-MAC processor that also includes efficient RISC MCU system control functionality and multimedia processing capabilities. All are combined into one simple, optimized instruction set architecture.

Dynamic Power Management

Blackfin processors dynamic power management offers a flexible, software controlled environment that delivers the required amount of performance to the processor via independent, dynamic variation of both voltage and frequency. Blackfin processors also employ a gated clock scheme and multiple power-down modes for minimal power consumption.

Ease of Use
Blackfin processors employ both an optimized compiler and architecture to support software development in HLL, for example, C/C++, thus delivering code densities comparable to those of traditional microcontrollers. The architecture also has embedded features to support efficient use of a real-time operating system (RTOS).

Part Number ADSP-BF535PBB-200 ADSP-BF535PBB-300 ADSP-BF535PBBZ-200 ADSP-BF535PKB-300 ADSP-BF535PKB-350 ADSP-BF535PKBZ-300 ADSP-BF535PKBZ-350

Package 260-ball PBGA 260-ball PBGA 260-ball PBGA 260-ball PBGA 260-ball PBGA 260-ball PBGA 260-ball PBGA

31.27 to 48.22

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Z = RoHS compliant part.

www.analog.com/processors

43

SHARC Processor Family

Leadership in Floating-Point Applications

Analog Devices 32-bit floating-point SHARC processors are based on a Super Harvard Architecture that balances exceptional core and memory performance with outstanding I/O throughput capabilities. This Super Harvard Architecture extends the original concepts of separate program and data memory buses by adding an I/O processor with its associated dedicated buses. In addition to satisfying the demands of the most computationally intensive, real-time signal processing applications, SHARC processors integrate large memory arrays and application-specific peripherals designed to simplify product development and reduce time to market. The SHARC processor portfolio currently consists of four generations of products providing code-compatible solutions ranging from entry-level to the high performance products offering fixed- and floating-point computational power. All SHARC processors provide a common set of features and functionality usable across many signal processing markets and applications, allowing designers an easy transition to the newest products with the latest features and the highest performance.

Third Generation
Third generation SHARC processors are based on an enhanced SIMD architecture, which extends core performance to an impressive 400 MHz/2.4 GFLOPS. Third generation SHARC audio processors feature a high level of integrated on-chip peripherals, such as multichannel audio surround sound decoders and postprocessing algorithms, S/PDIF transmitter/receiver, high performance asynchronous sample-rate conversion, PWM channels, code security, and DTCP cipher for protection of digital data in automobiles. A number of third generation processors are also pin-compatible for use with a single hardware platform.

Fourth Generation
Fourth generation SHARC processors not only increase the core performance to an industry-leading 450 MHz/2.7 GFLOPs but also boost the performance with the addition of accelerator logic to off-load core activities from being consumed by filter processing. Fourth generation SHARC processors integrate some of the highest memory on-chip RAM with a capacity of 5 Mb. Extra memory capacity is further enhanced with the innovative VISA (variable instruction set architecture) mode where programs can save up to 30% of code size by reducing the opcodes for many instructions. For industrial and automotive applications, fourth generation processors also incorporate a thermal diode to allow customers the flexibility to operate in higher ambient operating temperature conditions without sacrificing overall performance. DTCP cipher for protection of digital data in automotive applications is also integrated in automotive parts. Integration of peripherals continues with serial ports, SPI ports, S/PDIF Tx/Rx, and an 8-channel asynchronous sample rate converter block. The fourth generation SHARC processor allows data from the serial ports to be directly transferred to external memory by the DMA controller, again preserving internal memory space for code and data. The fourth generation processor also incorporates link ports that allow processor to processor communication for data movement. Some fourth generation SHARC processors also integrate real-time clock (RTC) and watchdog timer functionality.

First Generation
First generation SHARC processors offer performance to 66 MHz/ 198 MFLOPS. Their easy to use instruction set architecture supports both 32-bit fixed-point and 32-/40-bit floating-point data formats combined with large memory arrays, and sophisticated communications ports make them suitable for a wide array of parallel processing applications, including consumer audio, medical imaging, military, industrial, and instrumentation.

Second Generation
Second generation SHARC processors double the level of signal processing performance (100 MHz/600 MFLOPS) by utilizing a single-instruction, multiple-data (SIMD) architecture. This hardware extension doubles the number of computational resources available to the system programmer. Second generation products contain dual multipliers, ALUs, shifters, and data register filessignificantly increasing overall system performance. This capability is especially relevant in consumer, automotive, and professional audio applications where the algorithms related to multichannel processing can effectively utilize the SIMD architecture.

SHARC Processor Product Portfolio

Highest Performance

ADSP-21261 ADSP-21262

ADSP-21266

ADSP-21362 ADSP-213631 ADSP-213641

ADSP-21371 ADSP-21375

ADSP-21368 ADSP-21369

ADSP-21365 ADSP-213661 ADSP-21367

ADSP-21478 ADSP-21479

ADSP-21483 ADSP-21486 ADSP-21487 ADSP-21488 ADSP-21489

ADSP-21469

Future

Performance > 2 GFLOPS Application-Specific Peripherals Configurable Applications I/O Interface Low Cost Audio Decoders in ROM Hardware Accelerators High Speed Interprocessor Communication (Link Ports) Low Power
NOTES
1

Blue product number indicates automotive grade is available.

ADSP-21363, ADSP-21364, ADSP-21366 do not have hardware accelerators.

44

Embedded Processors and DSP Selection Guide

SHARC Processor Family

Leadership in Floating-Point Applications

All SHARC processors are code-compatible with previous generations of SHARC processors, so legacy code is easily ported to the newer products. In addition, a number of third generation processors are also pin-compatible for use with a single hardware platform. Home theater applicationsThe ADSP-21266, ADSP-21363, ADSP-21366, ADSP-21367, ADSP-21483, ADSP-21486, and ADSP-21487 permit highly efficient software implementations of audio decode and postprocessing algorithms, such as Dolby Digital, Dolby Digital EX, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS 96/24 5.1, DTS-HD, DTS Express, MPEG-2 AAC LC, MPEG-2 BC 2ch, Dolby Pro Logic II, Dolby Pro Logic 2x, Dolby True HD, DTS Neo:6, DDPlus DCV, Neural Audio, Audyssey room equalization, and WMA Pro. Libraries of all standardand many proprietaryaudio algorithms reside in on-chip ROM, eliminating the need for external ROM. Professional audio applicationsA number of the third generation (ADSP-2136x) and fourth generation (ADSP-2146x) SHARC processors are well-suited for professional audio applications requiring high processing power and advanced on-chip peripherals such as sample rate conversion, S/PDIF transmitter/receiver, and BGA and LQFP package options. Broad market useSHARC processors are available in commercial, industrial, and automotive temperature grade packages. They are used in a wide variety of signal processing applications, providing up to 450 MHz performance in a single instruction, multiple data (SIMD) architecture. The combination of a high performance core surrounded by appropriate peripherals, a large software library, and award-winning CROSSCORE development tools makes the third generation SHARC processors the ideal choice for audio and broad market processor applications.

SHARC Melody Platform

Analog Devices SHARC Melody platform brings the highest quality audio processing available to audio receivers based on the premium performance of the third generation SHARC processors. The SHARC Melody with floating-point capability provides the highest quality platform on which to build high fidelity audio decoders and is now widely available in home theater systems designed by a range of leading global brands. These programmable DSP-based platforms ensure that end equipment is always up to date and able to support the newest standards as soon as content is available. Music enthusiasts love the quality of their living room surround sound systems. These audiophiles want that experience in their cars, necessitating a variety of audio-spatializer algorithms and equalizer functions that can be developed on SHARC Melody platforms. For midrange systems required in cars, Analog Devices also offers a SigmaDSP that integrates 24-bit DSP functionality with very high performance digital-to-analog converters to make an integrated, customizable equalizer. ADI also offers a wide range of audio codec and amplifier components, plus software to support in-car music playing and recording.

www.analog.com/processors

45

46
Peripheral Options1 Serial Ports 1.10
8 8

|
Voltage (V) Nominal2 Number of GPIOs Timers 635 6828 3.3 6358 6828 7288 6358 6828 3.3 6358 6828 7288 1508 3.3 1508 2508 1508 3.3 1508 2508 3.3 1.8 (DDR2) 773 400 720 400 720 1080 1430 840 3.3 3.3 3.3 617 2508 14 mm 14 mm, 0.5 mm, 100-lead LQFP_EP 40C to +85C, 0C to +70C 12 mm 12 mm, 0.8 mm, 196-ball CSP_BGA 19 mm 19 mm, 1.0 mm, 324-ball CSP_BGA 28 mm 28, mm, 0.5 mm, 208-lead LQFP_EP 28 mm 28 mm, 0.5 mm, 208-lead LQFP_EP 27 mm 27 mm, 1.27 mm, 256-ball SBGA 40C to +85C, 0C to +70C 0C to +70C 0C to +70C 40C to +85C, 0C to +70C 40C to +85C, 0C to +70C 40C to +85C, 0C to +70C 0C to +70C 12 mm 12 mm, 0.8 mm, 196-ball CSP_BGA 2508 14 mm 14 mm, 0.5 mm, 100-lead LQFP_EP 40C to +85C, 0C to +70C 24 mm 24 mm, 0.5 mm, 176-lead LQFP_EP 40C to +105C 40C to +105C 40C to +85C 40C to +105C 40C to +105C 40C to +85C 40C to +85C Contact ADI 40C to +105C 40C to +85C 40C to +105C 40C to +85C 40C to +85C 40C to +85C, 0C to +70C 3.3 1080 1365 1404 1.30 1.00 Async 25 6 SPORTs, 2 SPIs S/PDIF, ASRC, PWM, 2 PCGs Up to 16 3 GPs 1.20 3.3 960 1430 800 28 mm 28 mm, 0.5 mm, 208-lead LQFP_EP 27 mm 27 mm, 1.27 mm, 256-ball SBGA 40C to +105C 40C to +105C 0C to +70C, 7288 14 mm 14 mm, 0.5 mm, 100-lead LQFP_EP 40C to +85C, 0C to +70C 40C to +85C 24 24 mm, 0.5 mm, 176-lead LQFP_EP 728
8

SHARC Processor Family Selection Table

Packaging and Operating Temperature Range Options4, 5 Package4, 5 Temperature Range (Non-automotive Grade) Temperature Range Automotive Grade (W)2 External Memory Type Supported Other Ports/Features 8 SPORTs, 2 SPIs, UART, TWI Up to 9 1.108 2 GP WDTs 1.108 1.108 8 SPORTs, 2 SPIs, S/PDIF, ASRC, 4 PWMs, 4 UART, TWI PCGs, FIR/IIR/FFT accelerator Up to 9 1.108 2 GP WDTs 1.108 32 8 SPORTs, 2 SPIs, UART, TWI Up to 9 2 GP WDT RTCs 1.208 1.208 1.208 1.208 1.208 1.058 1.108 1.00 1.20 1.00 1.20 1.20 1.30 1.20 2 GP WDTs Up to 9 2 GP WDT RTCs Up to 8 3 GPs 1.208 34 32 8 SPORTs, 2 SPIs, UART, TWI 34 36 8 SPORTs, 2 SPIs, UART, TWI 8 SPORTs, 2 SPIs, UART, TWI S/PDIF, PWM, 4 PCGs PWM, 4 PCGs S/PDIF, ASRC, PWM, 4 PCGs, shared external memory Up to 16 3 GPs Up to 16 3 GPs Up to 16 2 GPs 4 SPORTs, 2 SPIs, UART, TWI 8 SPORTs, 2 SPIs, 2 UARTs, TWI S/PDIF, ASRC, 4 PWMs, 4 PCGs, shift register, FIR/IIR/ FFT accelerator 1.208 S/PDIF, ASRC, 4 PWMs, 4 PCGs, shift register, FIR/IIR/ FFT accelerator 2 GP WDTs 1.208 1.108 Async, 16-bit SDRAM 34 Async, 16-bit SDRAM Async, 16-bit SDRAM Async, 16-bit DDR2 Async, 32-bit SDRAM 32 24 34 Async, 16-bit SDRAM Async, 32-bit SDRAM 1.108 32 2 GPs 1.108 1.108 40C to +85C, 0C to +70C Async, 16-bit SDRAM 34 1.10
8

Performance DMA (Channels) Core VDDINT (Max Speed) 1.108 14 mm 14 mm, 0.5 mm, 100-lead LQFP_EP 40C to +85C External (I/O) Total Core Power Max (mW) 3

Memory

Part Number

Clock Speeds MHz 32 S/PDIF, ASRC, 4 PWMs, 4 PCGs, FIR/IIR/FFT accelerator 2 GPs

32-Bit Floating Point MMACS

On Chip L1 SRAM (Bits)

On Chip ROM (Bits)

Price @ 1k ($U.S.)6 8.54

8

Availability

300

600

350

700

9.968 11.368 9.498 11.078 12.628 12.868 14.298 17.868 14.298 15.888 19.858 7.998 8.518 8.338 9.258 8.818 9.798 9.048 10.648 28.50 31.50 13.27 13.27 Contact ADI 9.83 31.04 41.39 19.69 Production Production Production Production Production

ADSP-21488

400

800

300

600

3M

4M

350

700

400

800

300

600

350

700

ADSP-21489

400

800

300

600

5M

4M

350

700

400

800

200

400

ADSP-214787

266

532

200

400

3M

4M

Embedded Processors and DSP Selection Guide

S/PDIF, ASRC, PWM, 4 PCGs, 2 link ports, FIR/IIR/ FFT accelerator Async, 32-bit SDRAM 34 1.30 1.30 S/PDIF, ASRC, PWM, 4 PCGs Up to 16 3 GPs 8 SPORTs, 2 SPIs, 2 UARTs, TWI 1.20 28 mm 28 mm, 0.5 mm, 208-lead LQFP_EP 27 mm 27 mm, 1.27 mm, 256-ball SBGA; 28 mm 28 mm, 0.5 mm, 208-lead LQFP_EP 22.65 26.05 27.35 32.81 32.55 40C to +85C, 0C to +70C 40C to +85C (BGA only) 1.00 Async 25 6 SPORTs, 2 SPIs PWM, 2 PCG Up to 16 3 GPs 1.20 3.3 960 800 40C to +105C 40C to +105C 27.12 29.13 40C to +85C, 0C to +70C 40C to +85C (BGA only) 1.00 Async 25 6 SPORTs, 2 SPIs S/PDIF, ASRC, PWM, 2 PCGs Up to 16 3 GPs 1.20 3.3 960 800 40C to +105C 40C to +105C 20.22 42.85 40C to +85C, 0C to +70C 40C to +85C (BGA only) 29.75 Async 18 4 SPORTs, SPI 2 PCGs Up to 16 3 GPs 1.20 1.20 Async 22 6 SPORTs, SPI 2 PCGs Up to 16 3 GPs 1.20 3.3 600 3.3 <600 <600 0C to +70C 40C to +85C 0C to +70C 40C to +85C 40C to +85C 6.64 21.94 20 mm 20 mm, 0.5 mm, 144-lead LQFP_EP 12 mm 12 mm, 0.8 mm, 136-ball CSP_BGA; 20 mm 20 mm, 0.5 mm, 144-lead LQFP_EP 20 mm 20 mm, 0.5 mm, 144-lead LQFP_EP 12 mm 12 mm, 0.8 mm, 136-ball CSP_BGA; 20 mm 20 mm, 0.5 mm, 144-lead LQFP_EP 20 mm 20 mm, 0.5 mm, 144-lead LQFP_EP 12 mm 12 mm, 0.8 mm, 136-ball CSP_BGA; 20 mm 20 mm, 0.5 mm, 144-lead LQFP_EP 12 mm 12 mm, 0.8 mm, 136-ball CSP_BGA; 20 mm 20 mm, 0.5 mm, 144-lead LQFP 12 mm 12 mm, 0.8 mm, 136-ball CSP_BGA 12 mm 12 mm, 0.8 mm, 136-ball CSP_BGA; 20 mm 20 mm, 0.5 mm, 144-lead LQFP 17.15

266

532

200

400

ADSP-21479

266

532

200

400

5M

4M

266

532

ADSP-214697

400

800

450

900

5M

4M

ADSP-21371

200

400

266

532

1M

4M

Production Production Production

ADSP-21375

200

400

266

532

0.5M

2M

ADSP-21368

333

666

400

800

2M

6M

266

532

ADSP-21369

333

666

2M

6M

Production

350

700

366

732

400

800

200

400

ADSP-21362

3M

4M

Production

333

666

200

400

ADSP-21363

3M

4M

Production

333

666

200

400

ADSP-21364

3M

4M

Production

333

666

ADSP-21261

150

300

1M

3M

Production

150

300

ADSP-21262

2M

4M

Production

200

400

Performance External Memory Type Supported Serial Ports Other Ports/Features Timers Package4, 5 1.008 1.008 1.008 32 Async 1.008 34 1.008 1.00 Async 1.20 960 25 6 SPORTs, 2 SPIs S/PDIF, ASRC, PWM, 2 PCGs Up to 16 3 GPs 3.3 800 40C to +105C 6178 8 SPORTs, 2 SPIs, S/PDIF, ASRC, 4 PWMs, 4 UART, TWI PCGs, FIR/IIR/FFT accelerator Up to 9 2 GPs 3.3 0C to +70C 1.008 24 mm 24 mm, 0.5 mm, 176-lead LQFP_EP 5868 6178 Async, 16-bit SDRAM 1.008 24 mm 24 mm, 0.5 mm, 176-lead LQFP_EP 5868 8 SPORTs, 2 SPIs, S/PDIF, ASRC, 4 PWMs, 4 UART, TWI PCGs, FIR/IIR/FFT accelerator Up to 9 2 GPs 3.3 0C to +70C 40C to +105C 1.008 6178 14 mm 14 mm, 0.5 mm, 100-lead LQFP_EP 5868 3.3 6178 24 mm 24 mm, 0.5 mm, 176-lead LQFP_EP 0C to +70C 5868 DMA (Channels) Number of GPIOs Core VDDINT (Max Speed) External (I/O) Temperature Range (Non-automotive Grade) Temperature Range Automotive Grade (W)2 Total Core Power Max (mW) 3 Price @ 1k ($U.S.)6

Memory

Peripheral Options1

Voltage (V) Nominal2

Packaging and Operating Temperature Range Options4, 5

Part Number

Clock Speeds MHz

32-Bit Floating Point MMACS

On Chip L1 SRAM (Bits)

On Chip ROM (Bits)

Availability

SHARC Audio Processors (Include audio-specific peripherals and on-chip factory-programmed ROM. License agreement required from IP holders.) Async, 16-bit SDRAM 34 Up to 9 2 GPs 8 SPORTs, 2 SPIs, S/PDIF, ASRC, 4 PWMs, 4 UART, TWI PCGs, FIR/IIR/FFT accelerator Production

ADSP-21483

350

700

400

800

3M

Audio decoders

350

700

ADSP-21486

400

800

350

700

5M

Audio decoders

Production

400

800

ADSP-21487

350

700

400

800

5M

Audio decoders

Production

200

400

ADSP-21365

3M

333

666

Audio decoders

Production 40C to +85C (BGA only) 40C to +105C Contact ADI Production

40C to +85C

200 Async 1.20 960 25 6 SPORTs, 2 SPIs S/PDIF, ASRC, PWM, 2 PCGs Up to 16 3 GPs 3.3

400

1.00

800

40C to +105C

ADSP-21366

3M

333

666

Audio decoders

40C to +85C, 0C to +70C

40C to +85C (BGA only)

266

532

1.20

840

20 mm 20 mm, 0.5 mm, 144-lead LQFP_EP 12 mm 12 mm, 0.8 mm, 136-ball CSP_BGA; 20 mm 20 mm, 0.5 mm, 144-lead LQFP_EP 20 mm 20 mm, 0.5 mm, 144-lead LQFP_EP 12 mm 12 mm, 0.8 mm, 136-ball CSP_BGA; 20 mm 20 mm, 0.5 mm, 144-lead LQFP_EP 28 mm 28 mm, 0.5 mm, 208-lead LQFP_EP 40C to +85C, 0C to +70C

333 Async, 32-bit SDRAM 34 1.30 1.30 1.30 1.20 Async 1.20 600 22 6 SPORTs, SPI PWM, 2 PCGs Up to 16 3 GPs 3.3 <600 1430 1404 1365 S/PDIF, ASRC, PWM, 4 PCGs Up to 16 3 GPs 3.3 8 SPORTs, 2 SPIs, 2 UARTs, TWI

666

1.20

1080

ADSP-21367

2M

350

700

Audio decoders

27 mm 27 mm, 1.27 mm, 256-ball SBGA; 28 mm 28 mm, 0.5 mm, 208-lead LQFP_EP 28 mm 28 mm, 0.5 mm, 208-lead LQFP_EP 27 mm 27 mm 1.27 mm, 256-ball SBGA

Production

366

732

0C to +70C

400

800

150

300

ADSP-21266

200

400

2M

Audio decoders

12 mm 12 mm, 0.8 mm, 136-ball CSP_BGA; 20 mm 20 mm, 0.5 mm, 144-lead LQFP

0C to +70C

Production

NOTES
5

Due to pin muxing options, not all peripheral combinations maybe available togetherplease refer to data sheet and user manuals for full information.
6

Automotive grade products may require different voltage conditionsplease refer to data sheet for full information.

All packaging, operating temperature and grade combinations may not be availableplease refer to data sheet for full information and contact ADI for options outside those listed. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate the lowest priced version of that particular speed device and will vary depending on package type and/or temperature range and grade. Also available with an automotive grade (with DTCP and MLB options). Pricing, power, and core voltage are subject to changeplease contact ADI for further information.

Core Power (mW) stated for max core operating speed of the device at TA = 25C, ASF = 1.0 (VDDIN T nominal, IDD-INTYP supply current. Typical activity is the core executing a multifunction instruction fetched from internal memory, with 4 core memory accesses per CLKIN cycle (DMx64) and DMA through 3 SPORTs running. The DMA is chained to itself (running continuously) and does not use interrupts. The bit pattern for each core memory access and DMA is random). Please refer to associated data sheet and EE notes for further details and complete power calculation information. Dynamic power management available via software programmable PLL.
8

All DSP products available in RoHS compliant optionsplease refer to data sheet for complete information

www.analog.com/processors

47

ADSP-21483/ADSP-21486/ADSP-21487/ADSP-21488/ADSP-21489 SHARC Processors

High Performance Fourth Generation DSP

The fourth generation of SHARC processors now includes the ADSP-2148x family and offers increased performance, hardware-based filter accelerators, audio and application-focused peripherals, and new memory configurations capable of supporting the latest surround-sound decoder algorithms. All devices are pin-compatible with each other and completely code-compatible with all prior SHARC processors. These newest members of the fourth generation SHARC processor family are based on a single-instruction, multiple-data (SIMD) core, which supports both 32-bit fixed-point and 32-/40-bit floating-point arithmetic formats making them particularly suitable for high performance audio applications. The ADSP-2148x processor series offers the highest performance 400 MHz/2400 MFLOPsin an LQFP package and includes additional processing blocks such as FIR, IIR, and FFT accelerators to increase the total performance of the system. There is a new feature called variable instruction set architecture (VISA) that allows the code size to be decreased by 20% to 30% and increase the memory size availability. The fourth generation DSP allows the ability to connect to external memory by providing a glueless interface to 16-bit wide SDR SDRAMs. Fourth generation SHARC processors also integrate application-specific peripherals designed to simplify hardware design, minimize design risks, and ultimately reduce time to market. Grouped together, and broadly named the digital applications interface (DAI), these functional blocks may be connected to each other or to external pins via the softwareprogrammable signal routing unit (SRU). The SRU is an innovative architectural feature that enables complete and flexible routing amongst DAI blocks. Peripherals connected through the SRU include but are not limited to serial ports, IDP, S/PDIF Tx/Rx, and an 8-channel asynchronous sample rate converter block. The fourth generation SHARC processor allows data from the serial ports to be directly transferred to external memory by the DMA controller. Other peripherals such as SPI, UART and 2-wire interface are routed through a digital peripheral interface (DPI).

Features 400 MHz core clock speed 3 Mbits or 5 Mbits of on-chip RAM FIR, IIR, and FFT accelerators 16-bit wide SDR SDRAM external memory interface Digital applications interface (DAI) enabling user-definable access to peripherals including an S/PDIF Tx/Rx, and 8-channel asynchronous sample rate converter Fully enhanced DMA engine including scatter/gather DMA, delay line DMA 8 serial ports (SPORTs) supporting I2S, left-justified sample pair, DSP serial, and TDM modes 2 SPI-compatible ports supporting master and slave modes UART and 2-wire interface 16 pulse width modulation (PWM) channels 3 full-featured timers 176-lead LQFP E-Pad and 100-lead LQFP E-Pad packages Commercial and industrial temperature ranges Applications Industrial control Automotive audio Medical applications

ADSP-2148x Block Diagram

JTAG WDT PLL THERMAL DIODE

SHARC PROCESSOR CORE

ON-CHIP MEMORY RAM ROM HARDWARE ACCELERATOR FIR IIR FFT

DMA CONTROLLER DAI PCG PDAP SPI DPI TWI EXTERNAL MEMORY AMI

SPORTs

UART

GPIO

SDRAM

48

Embedded Processors and DSP Selection Guide

ADSP-21483/ADSP-21486/ADSP-21487/ADSP-21488/ADSP-21489 SHARC Processors

High Performance Fourth Generation DSP
Speed (MHz) 350 400 350 350 400 400 350 400 300 300 350 350 400 400 300 300 350 350 400 400 300 300 350 350 400 400 300 300 350 350 400 400 On-Chip Memory SRAM/ROM (Mb) 3/4 3/4 5/4 5/4 5/4 5/4 5/4 5/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4

Part Number1 ADSP-21483KSWZ-3B ADSP-21483KSWZ-4B ADSP-21486KSWZ-3A ADSP-21486KSWZ-3B ADSP-21486KSWZ-4A ADSP-21486KSWZ-4B ADSP-21487KSWZ-3B ADSP-21487KSWZ-4B ADSP-21488BSWZ-2A ADSP-21488BSWZ-2B ADSP-21488BSWZ-3A ADSP-21488BSWZ-3B ADSP-21488BSWZ-4A ADSP-21488BSWZ-4B ADSP-21488KSWZ-2A ADSP-21488KSWZ-2B ADSP-21488KSWZ-3A ADSP-21488KSWZ-3B ADSP-21488KSWZ-4A ADSP-21488KSWZ-4B ADSP-21489BSWZ-2A ADSP-21489BSWZ-2B ADSP-21489BSWZ-3A ADSP-21489BSWZ-3B ADSP-21489BSWZ-4A ADSP-21489BSWZ-4B ADSP-21489KSWZ-2A ADSP-21489KSWZ-2B ADSP-21489KSWZ-3A ADSP-21489KSWZ-3B ADSP-21489KSWZ-4A ADSP-21489KSWZ-4B
1 2

Temperature Range 0C to 70C 0C to 70C 0C to 70C 0C to 70C 0C to 70C 0C to 70C 0C to 70C 0C to 70C 40C to 85C 40C to 85C 40C to 85C 40C to 85C 40C to 85C 40C to 85C 0C to 70C 0C to 70C 0C to 70C 0C to 70C 0C to 70C 0C to 70C 40C to 85C 40C to 85C 40C to 85C 40C to 85C 40C to 85C 40C to 85C 0C to 70C 0C to 70C 0C to 70C 0C to 70C 0C to 70C 0C to 70C

Key Peripherals

Package 176-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 176-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad 100-lead LQFP E-Pad 176-lead LQFP E-Pad

Price Range @1k ($U.S.)2,3

Contact ADI

2 timers, 1 UART, 8 SPORTs, 8-channel ASRC, 2 SPIs, 1 TWI, 4 PCGs, PWM, S/PDIF Rx/Tx Integrated audio decoders (ADSP-21483/ ADSP-21487 only)

8.54 to 18.35

12.86 to 23.81

Certain models available in automotive grade. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Pricing is subject to change. Please contact ADI for further information.

Z = RoHS compliant part. License agreement required from IP holders before purchase of the ADSP-21483, ADSP-21486, and ADSP-21487.

www.analog.com/processors

49

ADSP-21478/ADSP-21479 SHARC Processors

High Performance Fourth Generation DSP

The fourth generation of SHARC processors now includes the low power floating-point DSP productsthe ADSP-21478 and ADSP-21479and offers increased performance, hardware-based filter accelerators, audio and application-focused peripherals, and new memory configurations capable of supporting a single chip solution. All devices are pin-compatible with each other and completely code-compatible with all prior SHARC processors. These newest members of the fourth generation SHARC processor family are based on a single-instruction, multiple-data (SIMD) core, which supports both 32-bit fixed-point and 32-/40-bit floating-point arithmetic formats and their low power make them particularly suitable for battery powered applications or where a higher ambient operating temperature is required. The ADSP-2147x series offers very low power and high performance 266 MHz/1596 MFLOPs in a BGA and LQFP package. This feature of power makes the ADSP-2147x processors particularly well suited to address the automotive audio and many industrial control segments where low power is a requirement. In addition to its high core performance, the ADSP-21479 includes additional processing blocks such as FIR, IIR, and FFT accelerators to increase the total performance of the system. There is a new feature called variable instruction set architecture (VISA) that allows the code size to be decreased by 20% to 30% and increase the memory size availability. The fourth generation DSP allows the ability to connect to external memory by providing a glueless interface to 16-bit wide SDR SDRAMs. Fourth generation SHARC processors also integrate application-specific peripherals designed to simplify hardware design, minimize design risks, and ultimately reduce time to market. Grouped together, and broadly named the digital applications interface (DAI), these functional blocks may be connected to each other or to external pins via the software-programmable signal routing unit (SRU). The SRU is an innovative architectural feature that enables complete and flexible routing amongst DAI blocks. Peripherals connected through the SRU include but are not limited to serial ports, IDP, S/PDIF Tx/Rx, and an 8-channel asynchronous sample rate converter block. The fourth generation SHARC processor allows data from the serial ports to be directly transferred to external memory by the DMA controller. Other peripherals such as SPI, UART and 2-wire interface are routed through a digital peripheral interface (DPI).

Features 266 MHz core clock speed 3 Mbits or 5 Mbits of on-chip RAM FIR, IIR, and FFT accelerators 16-bit wide SDR SDRAM external memory interface Digital applications interface (DAI) enabling user-definable access to peripherals including an S/PDIF Tx/Rx, and 8-channel asynchronous sample rate converter Fully enhanced DMA engine including scatter/gather DMA, delay line DMA Real-time clock (RTC) 8 serial ports (SPORTs) supporting I2S, left-justified sample pair, and TDM modes Watchdog timer Shift registers 2 SPI-compatible ports supporting master and slave modes UART and 2-wire interface 16 pulse width modulation (PWM) channels 3 full-featured timers 196-ball CSP_BGA and 100-lead LQFP E-Pad packages Commercial, industrial, and automotive temperature ranges Applications Industrial control and instrumentation Automotive audio Medical applications

ADSP-21478/ADSP-21479 Block Diagram

JTAG WDT RTC PLL THERMAL DIODE

SHARC PROCESSOR CORE

ON-CHIP MEMORY RAM ROM HARDWARE ACCELERATOR FIR IIR FFT

DMA CONTROLLER DAI PCG PDAP SPI DPI TWI EXTERNAL MEMORY AMI

SPORTs

UART

GPIO

SDRAM

50

Embedded Processors and DSP Selection Guide

ADSP-21478/ADSP-21479 SHARC Processors

High Performance Fourth Generation DSP
Speed (MHz) 200 266 200 266 200 266 200 266 200 266 200 266 200 266 200 266 On-Chip Memory SRAM/ROM (Mb) 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4

Part Number1 ADSP-21478BBCZ-1B ADSP-21478BBCZ-2B ADSP-21478BSWZ-1A ADSP-21478BSWZ-2A ADSP-21478KBCZ-1B ADSP-21478KBCZ-2B ADSP-21478KSWZ-1A ADSP-21478KSWZ-2A ADSP-21479BBCZ-1B ADSP-21479BBCZ-2B ADSP-21479BSWZ-1A ADSP-21479BSWZ-2A ADSP-21479KBCZ-1B ADSP-21479KBCZ-2B ADSP-21479KSWZ-1A ADSP-21479KSWZ-2A
NOTES
1 2

Temp Range 40C to +85C 40C to +85C 40C to +85C 40C to +85C 0C to 70C 0C to 70C 0C to 70C 0C to 70C 40C to +85C 40C to +85C 40C to +85C 40C to +85C 0C to 70C 0C to 70C 0C to 70C 0C to 70C

Key Peripherals

Package 196-ball CSP_BGA 196-ball CSP_BGA 100-lead LQFP E-Pad 100-lead LQFP E-Pad 196-ball CSP_BGA 196-ball CSP_BGA 100-lead LQFP E-Pad 100-lead LQFP E-Pad 196-ball CSP_BGA 196-ball CSP_BGA 100-lead LQFP E-Pad 100-lead LQFP E-Pad 196-ball CSP_BGA 196-ball CSP_BGA 100-lead LQFP E-Pad 100-lead LQFP E-Pad

Price Range @1k ($U.S.)2,3

7.99 to 11.10

2 timers, 1 UART, 8 SPORTs, 8-channel ASRC, 2 SPIs, 1 TWI, 4 PCGs, PWM, S/PDIF Rx/Tx, WDT RTC (196 BGA only)

8.81 to 12.71

Certain models available in automotive grade. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Pricing is subject to change. Please contact ADI for further information.

Z = RoHS compliant part.

www.analog.com/processors

51

ADSP-21469 SHARC Processors

High Performance Fourth Generation Processors

Features 450 MHz core clock speed 5 Mb of on-chip RAM 4 Mb of on-chip ROM FIR, IIR, and FFT accelerators 16-bit wide DDR2 external memory interface Digital applications interface (DAI) enabling user-definable access to peripherals, including an S/PDIF Tx/Rx and 8-channel asynchronous sample rate converter Fully enhanced DMA engine including scatter/gather DMA, delay line DMA 2 link ports 8 serial ports (SPORTs) supporting I2S, left-justified sample pair, and TDM modes 2 SPI-compatible ports supporting master and slave modes UART and 2-wire Interface 16 pulse width modulation (PWM) channels 3 full-featured timers 324-ball PBGA package Commercial and industrial temperature ranges Core voltage: 1.0 V to 1.1 V Applications Industrial control Professional audio Medical applications Automotive audio Professional audio Consumer AVR Digital audio amplifiers

The fourth generation of SHARC processors, which includes the ADSP-21469, offers increased performance, hardware-based filter accelerators, audio and application-focused peripherals, and new memory configurations capable of supporting the latest surround-sound decoder algorithms. All devices are pin-compatible with each other and completely code-compatible with all prior SHARC processors. These newest members of the SHARC processor family are based on a single-instruction, multiple-data (SIMD) core, which supports both 32-bit fixed-point and 32-/40-bit floating-point arithmetic formats, making them particularly suitable for high performance audio applications. There is a new feature called variable instruction set architecture (VISA) that allows the code size to be decreased by 20% to 30% and increases the memory size availability. The fourth generation SHARC processors allow the ability to connect to faster external memory by providing a glueless interface to DDR2 SDRAMs. Fourth generation SHARC processors also integrate applicationspecific peripherals designed to simplify hardware design, minimize design risks, and ultimately reduce time to market. Grouped together, and broadly named the digital applications interface (DAI), these functional blocks can be connected to each other or to external pins via the software-programmable signal routing unit (SRU). The SRU is an innovative architectural feature that enables complete and flexible routing among DAI blocks. Peripherals connected through the SRU include but are not limited to serial ports, SPI ports, S/PDIF Tx/Rx, and an 8-channel asynchronous sample rate converter block. The fourth generation SHARC processors allow data from the serial ports to be directly transferred to external memory by the DMA controller. Other peripherals such as UART and 2-wire interface are routed through a digital peripheral interface (DPI).

52

Embedded Processors and DSP Selection Guide

ADSP-21469 SHARC Processors

High Performance Fourth Generation Processors

ADSP-2146x Block Diagram
4Mb ROM 5Mb RAM EXTERNAL PORT DDR2 DRAM 225MHz 64 FIR/IIR/FFT ACCELERATOR JTAG TEST AND EMULATION ASYNC MEM I/F 32

THERMAL DIODE

24 16 8

SHARC VISA CORE 450MHz

ADDR DDR DATA ASYNC DATA

I/O PROCESSOR

IRQ/FLAGS

IOP REGISTER CONTROL, STATUS, DATA

DMA CONTROLLER

MLB LINK PORTS (2) 16

DAI ROUTING UNIT

INPUT DATA PORT/PDAP DTCP

TWI GPIO

DPI ROUTING UNIT

PRECISION CLOCK GENERATORS (4)

SPORTs (8)

SPIs (2)

GP TIMERS (2)

UART DIGITAL PERIPHERAL INTERFACE

DIGITAL APPLICATION INTERFACE 20 DAI PINS

14 DPI PINS

Part Number 1

Speed (MHz) 400 400 450

On-Chip Memory SRAM/ROM (Mb) 5/4 5/4 5/4

Ambient Temperature Range (C) 40 to +85 0 to 70 0 to 70

Key Peripherals 2 timers, 1 UART, 8 SPORTs, 8-channel ASRC, 2 SPIs, 16-bit DDR2 interface, 1 TWI, 4 PCGs, PWM, S/PDIF Rx/Tx, DAI, DPI, link ports, integrated audio decoders (ADSP-21467 only)

Package

Price Range @1k ($U.S.)2, 3

ADSP-21469BBCZ-3 ADSP-21469KBCZ-3 ADSP-21469KBCZ-4

NOTES
1 2

324-ball CSP_BGA 324-ball CSP_BGA 324-ball CSP_BGA 28.50 to 37.803

Certain models available in automotive grade. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Pricing is subject to change. Please contact ADI for further information.

Z = RoHS compliant part.

www.analog.com/processors

53

ADSP-21371/ADSP-21375 SHARC Processors

High Performance 32-Bit Floating-Point Processors

The ADSP-21371 and the ADSP-21375 provide the highest MFLOPS/$ performance for a variety of applications. Both the ADSP-21371 and the ADSP-21375 devices are pin-compatible and code-compatible with prior SHARC processors such as the ADSP-21367 and ADSP-21369. These members of the SHARC processor family are based on a singleinstruction, multiple-data (SIMD) core, which supports both 32-bit fixed-point and 32-/40-bit floating-point arithmetic formats, making them particularly suitable for cost optimized high precision applications. The ADSP-2137x SHARC processors also integrate many peripherals designed to simplify hardware design, minimize system design risks, and reduce end-customer time to market. Grouped together, and broadly named the digital applications interface (DAI), these functional blocks can be connected to each other or to external pins via the software-programmable signal routing unit (SRU). The SRU is an innovative architectural feature that enables complete and flexible routing among DAI blocks. Peripherals connected through the SRU include, but are not limited to, serial port and SPI port blocks. The ADSP-21375 provides up to 266 MHz core clock performance with 0.5 Mb on-chip SRAM and four serial ports. The ADSP-21371 provides the same maximum core clock frequency with 1.0 Mb on-chip SRAM and eight serial ports.

Features 266 MHz SIMD SHARC core, capable of 1596 MFLOPS peak performance 0.5 Mb or 1.0 Mb SRAM 24 or 32 zero-overhead DMA channels Digital applications interface (DAI) enabling user-definable access to peripherals 4 or 8 serial ports (SPORTs) supporting I2S, left justified sample pair, and TDM modes 2 SPI-compatible ports supporting master and slave modes 1 UART 1 TWI 2 full-featured timers 208-lead LQFP E-Pad package Commercial and industrial temperature ranges Core voltage: 1.2 V Applications Professional audio Medical applications Industrial and instrumentation

ADSP-21371 Block Diagram

JTAG AND CONTROL SPORTs (4/8) CORE TIMER 32-BIT EXTERNAL MEMORY INTERFACE/ DIRECT CODE EXECUTION FROM EXTERNAL MEMORY GPIO/FLAGS/IRQ DIGITAL PERIPHERAL INTERFACE ON-CHIP MEMORY TIMERS (3) SPI-2 TWI UARTs (1) I/O PROCESSOR WITH 32 ZERO-OVERHEAD DMA CHANNELS 1Mb SRAM 4Mb ROM 266MHz SIMD SHARC CORE S/PDIF Tx/Rx INTERRUPTS (10) PRECISION CLOCK GENERATORS (4) INPUT DATA PORT/PDAP GPIOs (20) DIGITAL APPLICATIONS INTERFACE

NEW/ENHANCED PERIPHERAL FOR SHARC 2136x

Part Number ADSP-21371BSWZ-2B ADSP-21371KSWZ-2A ADSP-21371KSWZ-2B ADSP-21375BSWZ-2B ADSP-21375KSWZ-2B

Max (MHz) 266 266 266 266 266

On-Chip Memory SRAM (Mb) 1 1 1 0.5 0.5

Ambient Temperature Range (C) 40 to +85 0 to 70 0 to 70 40 to +85 0 to 70

Key Peripherals

Package 208-lead LQFP E-Pad 208-lead LQFP E-Pad 208-lead LQFP E-Pad 208-lead LQFP E-Pad 208-lead LQFP E-Pad

Price Range @ 1k ($U.S.)1

2 timers, 1 UART, 4 SPORTs, 2 SPIs, 1 TWI, 4 PCGs, PWM, DAI, 16-bit SDRAM interface

13.27 to 15.92

9.83 to 11.79

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Z = RoHS compliant part.

54

Embedded Processors and DSP Selection Guide

ADSP-21367/ADSP-21368/ADSP-21369 SHARC Processors

Industry-Leading Performance for Floating-Point Applications

The ADSP-21367/ADSP-21368/ADSP-21369, at speeds up to 400 MHz/ 2.4 GFLOPS, deliver superior performance and a high degree of functional integration. These floating-point SHARC processors are designed to simplify audio product development, reduce time to market, and reduce product costs for a variety of applications, including multichannel A/V receivers, professional mixing consoles, and digital synthesizers. Using these SHARC processors, manufacturers can create differentiated products for their customers more quickly, more easily, and more cost-effectively than ever before. With its 6 Mb on-chip ROM factory-programmed with industry-standard audio decoders and postprocessor algorithms from Dolby, DTS, Microsoft, and SRS, the ADSP-21367 is one of the industrys high performers in audio processors available today. The 400 MHz ADSP-21368 adds shared memory capabilities, making it an ideal choice for professional audio applications and other processing intensive applications. The ADSP-21369 provides high performance signal processing with audio and broad market peripherals, as well as a 32-bit external memory interface supporting SRAM, SDRAM, flash, and ROM memory. Along with the ADSP-21367 and ADSP-21368, the ADSP-21369 supports both 16-bit and 32-bit SDRAM at speeds up to 166 MHz. The ADSP-21369 is wellsuited to address the needs of professional audio applications and other applications where high performance processing is essential.

Features 400 MHz/2.4 GFLOPS SIMD SHARC core supporting 32-bit floatingpoint, 40-bit floating-point, and 32-bit fixed-point data types 2 Mb SRAM, 6 Mb factory-programmed ROM (ADSP-21367 only) 32-bit external memory interface supports SDRAM, SRAM, flash, and ROM memory 8-channel, asynchronous sample rate conversion based on the AD1896 S/PDIF transmitter and receiver 8 serial ports 2 precision clock generators 20 lines of digital I/O port 4 timers, UART, I2C-compatible interface ROM/JTAG security mode Available in 256-ball SBGA and 208-lead LQFP E-Pad package options Available in commercial and industrial temperature grades Core voltage: 1.2 V to 1.3 V Applications Consumer A/V receivers Home theater systems Professional audio equipment Industrial and instrumentation

www.analog.com/processors

55

ADSP-21367/ADSP-21368/ADSP-21369 SHARC Processors

Industry-Leading Performance for Floating-Point Applications
ADSP-21368/ADSP-21369 Block Diagram
JTAG AND CONTROL SPORTs (8) CORE TIMER 32-BIT EXTERNAL MEMORY INTERFACE/ 16 PWMs GPIO/FLAGS/IRQ DIGITAL PERIPHERAL INTERFACE TIMERS (3) SPI-2 TWI GPIOs (20) UARTs (2) I/O PROCESSOR WITH 34 ZERO-OVERHEAD DMA CHANNELS ON-CHIP MEMORY 2Mb SRAM 6Mb ROM 1 UP TO 400MHz AT 1.3V SIMD SHARC CORE S/PDIF Tx/Rx INTERRUPTS (10) PRECISION CLOCK GENERATORS (4) 8-CHANNEL SAMPLE RATE CONVERSION INPUT DATA PORT/PDAP

NEW/ENHANCED PERIPHERAL FOR SHARC ADSP-2136x

1 FOR CONSUMER APPLICATIONS

Part Number ADSP-21367BBP-2A ADSP-21367BBPZ-2A ADSP-21367BSWZ-1A ADSP-21367KBP-2A ADSP-21367KBPZ-2A ADSP-21367KBPZ-3A ADSP-21367KSWZ-1A ADSP-21367KSWZ-2A ADSP-21367KSWZ-4A ADSP-21367KSWZ-5A ADSP-21368BBP-2A ADSP-21368BBPZ-2A ADSP-21368KBP-2A ADSP-21368KBPZ-2A ADSP-21368KBPZ-3A ADSP-21369BBP-2A ADSP-21369BBPZ-2A ADSP-21369BSWZ-1A ADSP-21369BSWZ-2A ADSP-21369KBP-2A ADSP-21369KBPZ-2A ADSP-21369KBPZ-3A ADSP-21369KSWZ-1A ADSP-21369KSWZ-2A ADSP-21369KSWZ-4A ADSP-21369KSWZ-5A

Max (MHz) 333 333 266 333 333 400 266 333 350 366 333 333 333 333 400 333 333 266 333 333 333 400 266 333 350 366

On-Chip Memory Ambient Temperature Range (C) SRAM/ROM (Mb) 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 2/6 40 to +85 40 to +85 40 to +85 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 40 to +85 40 to +85 0 to 70 0 to 70 0 to 70 40 to +85 40 to +85 40 to +85 40 to +85 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70

DIGITAL APPLICATIONS INTERFACE

Key Peripherals

Package 256-ball SBGA 256-ball SBGA 208-lead LQFP E-Pad 256-ball SBGA 256-ball SBGA 256-ball SBGA 208-lead LQFP E-Pad 208-lead LQFP E-Pad 208-lead LQFP E-Pad 208-lead LQFP E-Pad 256-ball SBGA 256-ball SBGA 256-ball SBGA 256-ball SBGA 256-ball SBGA 256-ball SBGA 256-ball SBGA 208-lead LQFP E-Pad 208-lead LQFP E-Pad 256-ball SBGA 256-ball SBGA 256-ball SBGA 208-lead LQFP E-Pad 208-lead LQFP E-Pad 208-lead LQFP E-Pad 208-lead LQFP E-Pad

Price Range @ 1k ($U.S.)1

Contact ADI

3 timers, 2 UARTs, 8 SPORTs, 2 SPIs, 1 TWI, S/PDIF Rx/Tx, 4 PCGs, PWM, 8-channel ASRC, 32-bit SDRAM interface, shared external memory support (ADSP-21368 only), integrated audio decoders in ROM (ADSP-21367 only)

31.04 to 47.81

19.69 to 37.91

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Z = RoHS compliant part. License agreement required from IP holders before purchase of the ADSP-21367.

56

Embedded Processors and DSP Selection Guide

ADSP-21366 SHARC Processor

333 MHz Performance for Home Theater

The ADSP-21366 is particularly well-suited to address the increasing requirements of the professional audio and home theater market segments. In addition to its higher core performance, the ADSP-21366 includes peripherals such as 16-bit parallel ports, an S/PDIF transmitter/ receiver, and an 8-channel asynchronous sample rate converter. Features 333 MHz/2 GFLOPS SIMD SHARC core supporting IEEE 32-bit floatingpoint, 40-bit floating-point, and 32-bit fixed-point data types 3 Mb SRAM; 4 Mb ROM embedded with the latest industry-standard audio decode and postprocessing algorithms 25 zero-overhead DMA channels
INPUT DATA PORT/PDAP INTERRUPTS (10) GPIO (20) ON-CHIP MEMORY GPIO 3Mb SRAM 4Mb ROM SPORTs (6) SPI-2 TIMERS (3) PRECISION CLOCK GENERATORS (2) S/PDIF Tx/Rx SIGNAL ROUTING UNIT

ADSP-21366 Block Diagram

CORE TIMER

333MHz SIMD SHARC CORE

JTAG and CONTROL

Digital applications interface (DAI) enabling user-definable access to peripherals, including an S/PDIF Tx/Rx, 8-channel asynchronous sample rate converter, and Digital Transmission Content Protection hardware accelerator 6 serial ports (SPORTs) supporting I2S, left justified sample pair, and TDM modes 2 SPI-compatible ports supporting master and slave modes 16 pulse-width modulation (PWM) channels 3 full-featured timers PLL capable of 1 to 32 frequency multiplication 16-bit parallel port Core voltage: 1.2 V Applications Consumer home theater Digital audio amplifiers Professional audio

PARALLEL PORT/GPIO 16 PWM OUTPUTS I/O PROCESSOR WITH 23 ZERO-OVERHEAD DMA CHANNELS

SPI-1

8-CHANNEL SAMPLE RATE CONVERSION (128 dB)

Part Number 1 ADSP-21366BBC-1AA ADSP-21366BBCZ-1AA ADSP-21366BSWZ-1AA ADSP-21366KBC-1AA ADSP-21366KBCZ-1AA ADSP-21366KSWZ-1AA ADSP-21366YSWZ-2AA

2

Max (MHz) 333 333 333 333 333 333 200

On-Chip Memory Ambient Temperature Range (C) SRAM/ROM (Mb) 3/4 3/4 3/4 3/4 3/4 3/4 3/4 40 to +85 40 to +85 40 to +85 0 to 70 0 to 70 0 to 70 40 to +105

Key Peripherals

Package

Price Range @ 1k ($U.S.)2

136-ball CSP_BGA 136-ball CSP_BGA 3 timers, 6 SPORTs, DAI, 2 SPIs, 2 PCGs, PWM, 144-lead LQFP E-Pad 8-channel ASRC, S/PDIF 136-ball CSP_BGA Rx/Tx, integrated audio 136-ball CSP_BGA decoders in ROM 144-lead LQFP E-Pad 144-lead LQFP E-Pad

Contact ADI

NOTES 1 Certain models available in automotive grade. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade.

Z = RoHS compliant part. License agreement required from IP holders before purchase of the ADSP-21366.

www.analog.com/processors

57

ADSP-21363/ADSP-21364 SHARC Processors

333 MHz Performance for Broad Market Applications
The ADSP-21363/ADSP-21364 provide superior performance333 MHz/ 2 GFLOPSwithin the third generation SHARC processor family. This level of performance makes the ADSP-21363/ADSP-21364 particularly well-suited to address the increasing requirements of a broad range of applications. High core performance, combined with audiocentric peripherals, including a high precision, 8-channel asynchronous sample rate converter and 16-bit parallel port, makes the ADSP-21363/ADSP-21364 an excellent choice. Features 333 MHz/2 GFLOPS SIMD SHARC core supporting IEEE 32-bit floatingpoint, 40-bit floating-point, and 32-bit fixed-point data types 3 Mb SRAM, 4 Mb ROM 25 zero-overhead DMA channels High precision, 8-channel asynchronous sample rate converter based on the award-winning AD1896 Digital applications interface (DAI) enabling user-definable access to peripherals, including an input data port (IDP) and general-purpose I/O
INPUT DATA PORT/PDAP INTERRUPTS (10)

ADSP-21363/ADSP-21364 Block Diagram

CORE TIMER

333MHz SIMD SHARC CORE

6 serial ports (SPORTs) supporting I2S, left justified sample pair, and TDM modes 2 SPI-compatible ports supporting master and slave modes 16 pulse-width modulation (PWM) channels
SIGNAL ROUTING UNIT

JTAG and CONTROL ON-CHIP MEMORY GPIO 3Mb SRAM 4Mb ROM

GPIOs (20)

SPORTs (6)

3 full-featured timers PLL capable of 1 to 32 frequency multiplication 16-bit parallel port Core voltage: 1.2 V Applications Automotive audio Consumer home theater Digital audio amplifiers Professional audio

SPI-2 PARALLEL PORT/GPIO 16 PWM OUTPUTS I/O PROCESSOR WITH 25 ZERO-OVERHEAD DMA CHANNELS TIMERS (3) PRECISION CLOCK GENERATORS (2) 8-CHANNEL SAMPLE RATE CONVERSION (140 dB)

SPI-1

S/PDIF Tx/Rx

140dB SRC AVAILABLE FOR THE ADSP-21364 ONLY. S/PDIF AND SRC NOT AVAILABLE ON THE ADSP-21363.

Part Number 1 ADSP-21363BBC-1AA ADSP-21363BBCZ-1AA ADSP-21363BSWZ-1AA ADSP-21363KBC-1AA ADSP-21363KBCZ-1AA ADSP-21363KSWZ-1AA ADSP-21363YSWZ-2AA ADSP-21364BBC-1AA ADSP-21364BBCZ-1AA ADSP-21364BSWZ-1AA ADSP-21364KBC-1AA ADSP-21364KBCZ-1AA ADSP-21364KSWZ-1AA ADSP-21364YSWZ-2AA
2

Max (MHz) 333 333 333 333 333 333 200 333 333 333 333 333 333 200

On-Chip Memory SRAM/ROM (Mb) 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4

Ambient Temperature Key Peripherals Range (C) 40 to +85 40 to +85 40 to +85 0 to 70 3 timers, 6 SPORTs, 0 to 70 2 SPIs, S/PDIF Rx/Tx 0 to 70 (not available on 40 to +105 ADSP-21363), 8-channel ASRC 40 to +85 (not available on 40 to +85 ADSP-21363), 2 PCGs, 40 to +85 PWM, DAI 0 to 70 0 to 70 0 to 70 40 to +105

Package 136-ball CSP_BGA 136-ball CSP_BGA 144-lead LQFP E-Pad 136-ball CSP_BGA 136-ball CSP_BGA 144-lead LQFP E-Pad 144-lead LQFP E-Pad 136-ball CSP_BGA 136-ball CSP_BGA 144-lead LQFP E-Pad 136-ball CSP_BGA 136-ball CSP_BGA 144-lead LQFP E-Pad 144-lead LQFP E-Pad

Price Range @ 1k ($U.S.)2

20.22 to 29.13

29.75 to 42.85

NOTES 1 Certain models available in automotive grade. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade.

Z = RoHS compliant part.

58

Embedded Processors and DSP Selection Guide

ADSP-21266 SHARC Processor

32-Bit Floating-Point Processor for Home Theater

The ADSP-21266 is a third generation SHARC processor optimized for consumer audio applications. This processor offers the same features as the ADSP-21262, with the addition of factory programmed ROM to contain the latest multichannel audio decoders from Dolby and DTS. The ADSP-21266 is code-compatible with all prior SHARC processors and pin-compatible with third generation processors. The ADSP-21266 is based on a SIMD core, which supports both 32-bit fixed-point and 32-/40-bit floating-point arithmetic formats, making them particularly suitable for high performance consumer audio applications, such as home theater systems and A/V receiver systems. Features 200 MHz (5 ns) SIMD SHARC core, capable of 1.2 GFLOPS Supports IEEE-compatible 32-bit floating-point, 40-bit floating-point, and 32-bit fixed-point data types 2 Mb SRAM; 4 Mb ROM embedded with industry-standard audio decode and postprocessing algorithms 16-bit parallel port 22 zero-overhead DMA channels Digital applications interface (DAI) enables user-definable access to peripherals, including precision clock generators, IDP, and general-purpose I/O 6 serial ports (SPORTs) supporting I2S, left justified sample pair, and TDM modes SPI-compatible, port-supporting master and slave modes 3 full-featured timers Software PLL capable of a variety of multiplier ratios 136-ball CSP_BGA (12 mm 12 mm) and 144-lead LQFP (20 mm 20 mm) packages Industrial grade BGA available Core voltage: 1.2 V Applications Consumer home theater Professional audio Automotive audio

SHARC Melody Platform

The SHARC Melody platform combines high performance processors with optimized software, offering complete audio solutions to home theater manufacturers. The ADSP-21266 is a large memory, high performance device targeted primarily at mid- to high-end home theater systems. SHARC Melody solutions are offered through on-chip ROM containing industry-standard audio decoder algorithms such as: PCM Dolby Digital Dolby Digital EX2 Dolby Pro Logic IIx DTS 5.1 DTS ES DTS Neo:6 (cinema and music) DTS 96/24 MPEG-2 AAC LC MPEG-2 (BC) 2 channel WMA Pro v7.1 Part Number ADSP-21266SKBCZ-2B ADSP-21266SKBCZ-2C ADSP-21266SKBCZ-2D ADSP-21266SKSTZ-1B ADSP-21266SKSTZ-1C ADSP-21266SKSTZ-1D ADSP-21266SKSTZ-2B ADSP-21266SKSTZ-2C ADSP-21266SKSTZ-2D Max (MHz) 200 200 200 150 150 150 200 200 200

On-Chip Memory Ambient Temperature Range (C) SRAM/SROM (Mb) 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70

Key Peripherals

Package 136-ball CSP_BGA 136-ball CSP_BGA 136-ball CSP_BGA 144-lead LQFP 144-lead LQFP 144-lead LQFP 144-lead LQFP 144-lead LQFP 144-lead LQFP

Price Range @ 1k ($U.S.)1

3 timers, 6 SPORTs, 1 SPI, integrated audio decoders in ROM, 2 PCGs, DAI

Contact ADI

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Z = RoHS compliant part. License agreement required from IP holders before purchase of the ADSP-21266.

www.analog.com/processors

59

ADSP-21262 SHARC Processor

200 MHz, Low Cost, 32-/40-Bit Floating-Point Processor

The ADSP-21262 is a third generation SHARC programmable digital signal processor operating at up to 200 MHz. The design of the ADSP-21262 is based on a SIMD architecture that efficiently supports execution of 32-bit fixed-point and 32-/40-bit floating-point arithmetic formats. With its SIMD core operating at 200 MHz (a 5 ns instruction cycle time), the processor actually operates at up to 400 MMACS/1200 MFLOPS. With such a high bandwidth core, the ADSP-21262 is capable of executing 1024-point complex FFT operations in just 46 s. This is more than 2.6 times faster than comparatively priced processors and provides optimal performance in audio as well as in broad market processor applications. Applications Professional audio Consumer A/V receivers Automotive audio Medical appliances Voice recognition Test and measurement equipment Telephony Wireless communications

Digital Applications Interface (DAI) for Simplified I/O System Development

The ADSP-21262 introduces the DAI, an architecture that enables complete software programmability of various peripherals. The flexibility and ease of use of the SHARC programming model, combined with the DAI, allow manufacturers to deploy one hardware configuration into multiple product offerings with different I/O requirements. Features 200 MHz (5 ns) SIMD SHARC core, capable of 1.2 GFLOPS Code-compatible with all SHARC processors Pin-compatible with all SHARC ADSP-2126x and ADSP-2136x processors Supports IEEE-compatible 32-bit floating-point, 40-bit floating-point, and 32-bit fixed-point data types 2 Mb on-chip, dual-ported SRAM 2.4 GBps on-chip bandwidth 22 zero-overhead DMA channels 6 independent serial portssupports standard DSP serial, I2S, left justified sample pair, and TDM modes SPI-compatible interface and a 16-bit parallel port Digital applications interface (DAI) 4 timers: 1 core and 3 general-purpose 136-ball CSP_BGA (12 mm 12 mm) and 144-lead LQFP (20 mm 20 mm) packages available in commercial and industrial temperature ranges Core voltage: 1.2 V

ADSP-21262 Block Diagram

DAI
7

SPORT 0 MISCELLANEOUS CONTROL PINS

200MHz SIMD SHARC CORE

SPORT 1 SPORT 2

JTAG

SPORT 3 DUAL-PORTED MEMORY SPORT 4 SPORT 5 INTERRUPTS (10) GPIOs (20 IN/20 OUT) SIGNAL ROUTING UNITS
20

GPIO 2Mb SRAM 4 TIMERS 4Mb ROM

PARALLEL PORT/GPIO
4

I/O PROCESSOR WITH 22 ZERO-OVERHEAD DMA CHANNELS

PRECISION CLOCK GENERATOR INPUT DATA PORT/PDAP (8)

SPI

Part Number 1 ADSP-21262SBBC-150 ADSP-21262SBBCZ150 ADSP-21262SKBC-200 ADSP-21262SKBCZ200 ADSP-21262SKSTZ200

Max (MHz) 150 150 200 200 200

On-Chip Ambient Temperature Memory Key Peripherals Range (C) SRAM/SROM (Mb) 2/4 40 to +85 2/4 40 to +85 3 timers, 6 SPORTs, 2/4 0 to 70 1 SPI, 2 PCGs, DAI 2/4 0 to 70 2/4 0 to 70

Package 136-ball CSP_BGA 136-ball CSP_BGA 136-ball CSP_BGA 136-ball CSP_BGA 144-lead LQFP

Price Range @ 1k ($U.S.)2

17.15 to 25.35

NOTES 1 Certain models available in automotive grade.

2

Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade.

Z = RoHS compliant part.

60

Embedded Processors and DSP Selection Guide

ADSP-21261 SHARC Processor

150 MHz, Low Cost, 32-Bit Floating-Point Processor

The ADSP-21261 is the lowest cost member of the third generation of SHARC programmable digital signal processors. It is based on the SIMD SHARC core that supports execution of 32-bit fixed-point and 32-/40-bit floating-point arithmetic formats. With its core running at 150 MHz (6.67 ns instruction cycle time), the ADSP-21261 is capable of executing 1024-point complex FFT operations in 61 s. The processors single-instruction, multiple-data (SIMD) mode effectively doubles the processor performance. The ADSP-21261 is designed with a high level of functional integration, including 1 Mb of on-chip, dual-ported SRAM, which enables sustained processor and I/O performance without the need for external memory. System I/O is achieved through four full-duplex serial ports, four timers, a 16-bit parallel port, a serial peripheral interface (SPI), 18 zero-overhead direct memory access (DMA) channels delivering fast data transfers without processor intervention, and an innovative digital applications interface (DAI), which provides the user complete software control through its signal routing unit (SRU). Features 150 MHz (6.67 ns) SIMD SHARC core, capable of 900 MFLOPS peak performance Code-compatible with all SHARC processors Supports IEEE-compatible 32-bit floating-point, 40-bit floating-point, and 32-bit fixed-point data types 1 Mb on-chip, dual-ported SRAM 18 zero-overhead DMA channels 4 independent serial ports that support standard DSP serial mode, I2S mode, left justified sample-pair mode, and TDM mode SPI-compatible interface and a 16-bit parallel port Digital applications interface (DAI) Software configurable PLL providing many possible multiplier ratios 4 timers: 1 core and 3 general-purpose 136-ball CSP_BGA (12 mm 12 mm) and 144-lead LQFP (20 mm 20 mm) packages available in commercial temperature range Core voltage: 1.2 V Applications Medical appliances Test and measurement equipment Voice recognition Professional audio Consumer A/V receivers Automotive audio Telephony Wireless communications

ADSP-21261 Block Diagram

CORE TIMER 150MHz SIMD SHARC CORE INPUT DATA PORT/PDAP INTERRUPTS (10) JTAG AND CONTROL ON-CHIP MEMORY GPIO 1Mb SRAM 3Mb ROM SPORTs (4)

GPIOs (20)

SIGNAL ROUTING UNIT

TIMERS (3) 16-BIT PARALLEL PORT/GPIO I/O PROCESSOR WITH 18 ZERO-OVERHEAD DMA CHANNELS PRECISION CLOCK GENERATORS (2)

SPI

Part Number ADSP-21261SKBC-150 ADSP-21261SKBCZ150 ADSP-21261SKSTZ150

Max (MHz) 150 150 150

On-Chip Memory SRAM/SROM (Mb) 1/3 1/3 1/3

Ambient Temperature Range (C) 0 to 70 0 to 70 0 to 70

Key Peripherals 3 timers, 4 SPORTs, 1 SPI, 2 PCGs, DAI, 2 link ports, DMA controller

Package 136-ball CSP_BGA 136-ball CSP_BGA 144-lead LQFP

Price Range @ 1k ($U.S.)1

6.64 to 7.68

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Z = RoHS compliant part.

www.analog.com/processors

61

ADSP-21161N SHARC Processor

100 MHz, Low Cost, 32-Bit Processor
The 32-bit floating-point programmable ADSP-21161N processor is based on a SIMD SHARC architecture and is optimized for single processor and small multiprocessor systems. The ADSP-21161N core operates at up to 100 MHz and is capable of 600 MFLOPS. The core is supported by 12 GPIO flags, SPI ports, and serial ports, and it supports external SDRAM and SBSRAM, which make the ADSP-21161N an excellent choice for audio and broad market multiprocessing applications. Applications Speech recognition Professional and high end consumer audio Automotive entertainment Fingerprint recognition Digital audio broadcast Wireless communications Motor control Global positioning systems Medical equipment Telephony Test equipment

Benefits
Cluster multiprocessing and two 100 MBps link ports simplify connection and communication for multiprocessing SDRAM controller improves large DRAM bank throughput 4 serial ports allow 16 channels of data to be transferred in/out of the processor Features 100 MHz (10 ns) SIMD SHARC processor core 600 MFLOPS (32-bit floating-point data), 600 MOPS (32-bit fixed-point data) Code-compatible with ADSP-21x6x SHARC processors Supports IEEE-compatible 32-bit floating-point, 40-bit floating-point, and 32-bit fixed-point math Single-cycle instruction execution, including SIMD operations in both computational units 1 Mb on-chip, dual-ported SRAM 2.4 GBps on-chip data bandwidth 14 zero-overhead DMA channels 4 synchronous serial ports with I2S support Serial ports support 128-channel TDM frames with selection of companding on a per channel basis Integrated support for SDRAM and SBSRAM external memories Support for single-cycle, 100 MHz instruction execution from 48-bit wide external memories Core voltage: 1.8 V Part Number1 ADSP-21161NCCA-100 ADSP-21161NCCAZ100 ADSP-21161NKCA-100 ADSP-21161NKCAZ100
NOTES
1 2

ADSP-21161N Block Diagram

CORE PROCESSOR TIMER INSTRUCTION CACHE 32 48-BIT DUAL-PORTED SRAM TWO INDEPENDENT DUAL-PORTED BLOCKS PROCESSOR PORT I/O PORT ADDR DATA DATA ADDR ADDR DATA DATA ADDR BLOCK0 BLOCK1 JTAG TEST AND EMULATION GPIO FLAGS SDRAM CONTROLLER EXTERNAL PORT ADDRESS BUS MUX MULTIPROCESSOR INTERFACE DATA BUS MUX HOST PORT DATA REGISTER FILE (PEX) 16 40-BIT DATA REGISTER FILE (PEY) 16 40-BIT 32 24 6 12

DAG1 8 4 32

DAG2 8 4 32

PROGRAM SEQUENCER 32 32 IOD 64 IOA 32

PM ADDRESS BUS DM ADDRESS BUS

BUS CONNECT (Px)

PM DATA BUS DM DATA BUS

64 64

MULT

BARREL SHIFTER

BARREL SHIFTER

MULT

IOP REGISTERS (MEMORY MAPPED) CONTROL, STATUS, AND DATA BUFFERS

DMA CONTROLLER SERIAL PORTS (4) LINK PORTS (2) SPI PORTS (1)

5 16 20 4

ALU

ALU

I/O PROCESSOR

Max (MHz) 100 100 100 100

On-Chip Memory SRAM (Mb) 1 1 1 1

Temperature Range (C) 40 to +85 ambient 40 to +85 ambient 0 to 85 case 0 to 85 case

Key Peripherals 3 timers, 4 SPORTs, 1 SPI, 2 PCGs, DAI, 2 link ports, DMA controller

Package 225-ball CSP_BGA 225-ball CSP_BGA 225-ball CSP_BGA 225-ball CSP_BGA

Price Range @ 1k ($U.S.)2 26.17 to 36.27

Certain models available in automotive grade. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade.

Z = RoHS compliant part.

62

Embedded Processors and DSP Selection Guide

ADSP-21160 SHARC Processor

100 MHz, 32-Bit Processor for Multiprocessing Applications

The ADSP-21160 family introduces single-instruction, multiple-data (SIMD) processing to the SHARC processor family. While maintaining code compatibility with previous SHARC family members, the SIMD architecture provides up to a 2 increase in performance on a cycleby-cycle basis. Like all SHARC processors, the ADSP-21160 offers native support of 32-bit fixed-point and 32-/40-bit floating-point data types. Designed specifically for multiprocessing applications, the ADSP-21160 offers a balanced architecture with 600 MFLOPS core performance, 4 Mb on-chip SRAM, zero-overhead DMAs, large I/O bandwidth, and multiprocessing support through cluster and link port interfaces. Applications Audio Medical Military 3D graphics Imaging Communications Features Glueless clusters of up to 6 SHARC processors Link ports for 2D and 3D arrays Distributed bus arbitration Unified memory space Link ports provide up to 80 MBps I/O each 320 MBps external port Hardware support for semaphores 100 MHz (10.5 ns) core instruction rate Single-cycle instruction execution, including SIMD operations in both computational units 570 MFLOPS peak and 380 MFLOPS sustained performance (based on FIR) Dual data address generators (DAGs) with modulo and bit-reverse addressing 4 Mb dual-ported SRAM Zero-overhead looping and single-cycle loop setup, providing efficient program sequencing IEEE 1149.1 JTAG standard test access port and on-chip emulation Core voltage: 1.8 V to 2.5 V

ADSP-21160 Block Diagram

CORE PROCESSOR
TIMER INSTRUCTION CACHE 32 48-BIT

DUAL-PORTED SRAM
BLOCK0 BLOCK1 TWO INDEPENDENT DUAL-PORTED BLOCKS PROCESSOR PORT DATA ADDR ADDR DATA DATA I/O PORT DATA ADDR ADDR JTAG TEST AND EMULATION 7

DAG1 8 4 32

DAG2 8 4 32 PM ADDRESS BUS DM ADDRESS BUS

PROGRAM SEQUENCER 32 32 IOD 64 IOA 32 EXTERNAL PORT ADDRESS MUX BUS MULTIPROCESSOR INTERFACE 32

BUS CONNECT (Px)

PM DATA BUS DM DATA BUS

32/48/64 32/40/64 DATA MUX BUS HOST PORT 64

MULT

DATA REGISTER FILE (PEX) 16 40-BIT

BARREL SHIFTER

BARREL SHIFTER

DATA REGISTER FILE (PEY) 16 40-BIT

MULT

IOP REGISTERS (MEMORY MAPPED) CONTROL, STATUS, AND DATA BUFFERS

DMA CONTROLLER SERIAL PORTS (2) LINK PORTS (6)

4 6 6 60

ALU

ALU

I/O PROCESSOR

Part Number ADSP-21160MKB-80 ADSP-21160MKBZ-80 ADSP-21160NCB-100 ADSP-21160NCBZ-100 ADSP-21160NKB-100 ADSP-21160NKBZ-100

Max (MHz) 80 80 100 100 100 100

On-Chip Memory SRAM (Mb) 4 4 4 4 4 4

Temperature Range (C) 0 to 85 case 0 to 85 case 40 to +100 case 40 to +100 case 0 to 85 case 0 to 85 case

Key Peripherals 2 SPORTs, 4 link ports, DMA controller

Package 400-ball PBGA 400-ball PBGA 400-ball PBGA 400-ball PBGA 400-ball PBGA 400-ball PBGA

Price Range @ 1k ($U.S.)1

169.49 to 209.25

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. Z = RoHS compliant part.

www.analog.com/processors

63

ADSP-21065L SHARC Processor

32-Bit Processor
The ADSP-21065L is a broad market, programmable 32-bit SHARC processor that allows users to program with equal efficiency in both fixed-point and floating-point arithmetic. This programming flexibility, combined with the high performance core and integrated peripherals, make the ADSP-21065L an outstanding price/performance value for a broad base of consumer, communications, automotive, industrial, and computer applications. The ADSP-21065L is code-compatible with the ADI SHARC processor family and, as such, customers have immediate access to software and hardware development tools from ADI and SHARC processor third parties. Applications Keyless entry using voice analysis/recognition Barcode scanners Imaging Ultrasound equipment Digital oscilloscopes Fingerprint recognition Professional audio Automotive audio Consumer audio Features 544 kb configurable, dual-ported, on-chip memory 64M 32-bit word external address space 198 MFLOPS (32-bit floating-point) 198 MOPS (32-bit fixed-point) Glueless SDRAM interface 2 serial transmit/receive ports support 32-channel TDM I2S mode supports up to 16 channels 2 timers with event capture and PWM options 12 programmable I/O pins 10 DMA channels Glueless multiprocessing with two ADSP-21065L processors Code-compatible with all SHARC processors 208-lead MQFP, 196-ball CSP_BGA packages Core voltage: 3.3 V

ADSP-21065L Block Diagram

CORE PROCESSOR
TIMER 1 TIMER 2 INSTRUCTION CACHE 32 48-BIT

DUAL-PORTED SRAM
BLOCK0 BLOCK 1 TWO INDEPENDENT DUAL-PORTED BLOCKS PROCESSOR PORT ADDR DATA ADDR DATA DATA I/O PORT ADDR ADDR DATA

JTAG TEST AND EMULATION EXTERNAL PORT SDRAM INTERFACE MULTIPROCESSOR INTERFACE

DAG1 8 4 32

DAG2 8 4 32

PROGRAM SEQUENCER 24 32 48 40 IOD 48 IOA 17

HOST PORT ADDRESS MUX BUS DATA MUX BUS 24

PM ADDRESS BUS DM ADDRESS BUS PM DATA BUS DM DATA BUS

BUS CONNECT (Px)

32

DATA REGISTER FILE MULTIPLIER 16 40-BIT BARREL SHIFTER ALU

IOP REGISTERS (MEMORY MAPPED) CONTROL, STATUS, AND DATA BUFFERS

DMA CONTROLLER SPORT 0 SPORT 1

(2 Rx, 2 Tx) I2S (2 Rx, 2 Tx) I2S

I/O PROCESSOR

64

Embedded Processors and DSP Selection Guide

ADSP-21065L SHARC Processor

32-Bit Processor

Part Number ADSP-21065LCCA-240 ADSP-21065LCCAZ-240 ADSP-21065LCSZ-240 ADSP-21065LKCA-240 ADSP-21065LKCA-264 ADSP-21065LKCAZ240 ADSP-21065LKCAZ264 ADSP-21065LKSZ-240 ADSP-21065LKSZ-264

Max (MHz) 60 60 60 60 66 60 66 60 66

On-Chip Memory SRAM (kb) 544 544 544 544 544 544 544 544 544

Temperature Range (C) 40 to +100 case 40 to +100 case 40 to +100 case 0 to 85 case 0 to 85 case 0 to 85 case 0 to 85 case 0 to 85 case 0 to 85 case

Key Peripherals

Package 196-ball CSP_BGA 196-ball CSP_BGA 208-lead MQFP 196-ball CSP_BGA 196-ball CSP_BGA 196-ball CSP_BGA 196-ball CSP_BGA 208-lead MQFP 208-lead MQFP

Price Range @ 1k ($U.S.)1

2 SPORTs, DMA controller, 2 timers

22.85 to 69.93

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. L = indicates 3.3 V operation. Z = RoHS compliant part.

www.analog.com/processors

65

SigmaDSP Audio Processors

SigmaDSP digital audio processors enable anyone to use a fully programmable audio DSP that is easily configurable through the SigmaStudio Graphical Development Tool. The latest SigmaDSP products address the automotive and portable audio markets with our highest performance SigmaDSP and most power-conscious processor. The ADAU1442, ADAU1445, and ADAU1446 SigmaDSP devices combine a 172 MHz core with a routing matrix and asynchronous sample rate converters. The routing matrix allows connection of many digital sources running at different sample rates to seamlessly connect to the audio processor. The first low power SigmaDSP processors, the ADAU1761 and ADAU1781, include the same powerful SigmaDSP found in other parts and are paired with stereo ADCs and DACs at an SNR performance greater than 100 dB.

The first low power SigmaDSP devices, the ADAU1761 and ADAU1781, include the same powerful SigmaDSP found in other parts and is paired with stereo ADCs and DACs at an SNR performance greater than 100 dB. The AD1940 and AD1941 feature high processing power with more I/O channels. The ADAU1701 and ADAU1702 incorporate full analog I/O, digital I/O, and standalone functionality to provide a full audio processing system on a single chip. The ADAU1401 has similar functionality to the ADAU1701, but is designed specifically for the automotive market and specified over the extended temperature range.

SigmaDSP Product Selection Tables

Part Number AD1940 Instructions/ Data RAM Digital Analog I/O GPIOs Cycle (k Words) I/O Channels 1536 6 16/16 0/0 0 Other Features Description Package Price @ 1k ($U.S.) 8.45

Multichannel 28-/56-bit audio processor with 4-wire 48-lead LQFP SPI control interface. Multichannel 28-/56-bit audio processor with 48-lead LQFP 2-wire I2C control interface 28-/56-bit automotive audio processor with 2 ADCs and 4 DACs 8 2-channel ASRC, selfboot from EEPROM 2 8-channel ASRC, selfboot from EEPROM Selfboot from EEPROM 48-lead LQFP

AD1941

1536

16/16

0/0

8.45

ADAU1401A

1024

8/8

4/2

12

5.68

ADAU1442

3584

24/24

0/0

12

Digital audio processor with flexible audio routing matrix, 100-lead LQFP 2 8-channel ASRC Digital audio processor with flexible audio routing matrix, 100-lead LQFP 8 2-channel ASRC Digital audio processor with 100-lead LQFP flexible audio routing matrix

9.96

ADAU1445 ADAU1446

3584 3584

8 8

24/24 24/24

0/0 0/0

12 12

9.31 8.28

ADAU1461

1024

8/8

2/2

Digital microphone Stereo, automotive grade, inputs, headphone 96 kHz, 24-bit audio codec 32-lead LFCSP amplifier, with integrated PLL fractional PLL Selfboot from EEPROM Selfboot from EEPROM 28-/56-bit audio processor 48-lead LQFP with 2 ADCs and 4 DACs 28-/56-bit audio processor 48-lead LQFP with 2 ADCs and 4 DACs

4.89

ADAU1701 ADAU1702

1024 512

2 0.5

8/8 8/8

4/2 4/2

12 12

4.52 3.57

ADAU1761

1024

8/8

2/2

Digital microphone Stereo, low power, 96 kHz, inputs, headphone 24-bit audio codec with 32-lead LFCSP amplifier, integrated PLL fractional PLL Digital microphone inputs, mono speaker amplifier, fractional PLL SigmaDSP low-noise stereo audio codec for portable applications 32-lead LFCSP

3.91

ADAU1781

32-lead LFCSP

8/8

2/2

3.19

66

Embedded Processors and DSP Selection Guide

AD1940/AD1941

SigmaDSP Multichannel 28-Bit Audio Processor

The AD1940/AD1941 are complete 28-bit, single-chip, multichannel audio DSPs, for equalization, multiband dynamics processing, delay compensation, speaker compensation, and image enhancement. These algorithms can be used to compensate for the real-world limitations of speakers, amplifiers, and listening environments, resulting in a dramatic improvement of perceived audio quality. The signal processing used in the AD1940/AD1941 is comparable to that found in high end studio equipment. Most of the processing is done in full, 56-bit double-precision mode, resulting in very good low level signal performance and the absence of limit cycles or idle tones. The dynamics processor uses a sophisticated, multiple breakpoint algorithm often found in high end broadcast compressors. The AD1940/AD1941 are fully programmable DSPs. Easy to use software allows the user to graphically configure a custom signal processing flow using blocks such as biquad filters, dynamics processors, and surround sound processors. An extensive control port allows click-free parameter updates, along with readback capability from any point in the algorithm flow. The AD1940s digital input and output ports allow a glueless connection to ADCs and DACs by multiple, 2-channel serial data streams or TDM data streams. When in TDM mode, the AD1940 can input eight or 16 channels of serial data, and can output either eight or 16 channels of serial data. The input and output port configurations can be individually set. The AD1940 is controlled via a 4-wire SPI port, while the AD1941 is controlled with an I2C port. Applications Automotive sound systems Digital televisions Home theater systems (Dolby Digital/DTS postprocessor) Multichannel audio systems Mini-component stereos Multimedia audio Digital speaker crossover Musical instruments In-seat sound systems (aircrafts/motor coaches)

Features 16-channel digital audio processor Accepts sample rates up to 192 kHz 28-bit 28-bit multiplier with full 56-bit accumulator Fully programmable program RAM for custom program download Parameter RAM allows complete control of 1024 parameters SPI (AD1940) or I2C (AD1941) control port features safeload for transparent parameter updates and complete mode and memory transfer control Hardware-accelerated DSP core

AD1940/AD1941 Block Diagram

4

AD1940/AD1941
VOLTAGE REGULATOR 2 SERIAL DATA/ TDM INPUTS 28 - 28 DSP CORE DATA FORMAT: MASTER CLOCK INPUT PLL 5.23 (SINGLE PRECISION) 10.46 (DOUBLE PRECISION) SPI/I2C I/O 4 SERIAL CONTROL INTERFACE 2 2 SERIAL DATA/ TDM OUTPUTS

RAM

ROM

www.analog.com/processors

67

ADAU1401A

SigmaDSP 28-/56-Bit Automotive Audio Processor with Two ADCs and Four DACs

The ADAU1401A is a complete, single-chip audio system with 28-/56-bit audio DSP, ADCs, DACs, and microcontroller-like control interfaces. Signal processing includes equalization, crossover, bass enhancement, multiband dynamics processing, delay compensation, speaker compensation, and stereo image widening. This processing can be used to compensate for real-world limitations of speakers, amplifiers, and listening environments, providing dramatic improvements in perceived audio quality. The signal processing of the ADAU1401A is comparable to that found in high end studio equipment. Most processing is done in full 56-bit, double-precision mode, resulting in very good low level signal performance. The ADAU1401A is a fully programmable DSP. The easy to use SigmaStudio software allows the user to graphically configure a custom signal processing flow using blocks such as biquad filters, dynamics processors, level controls, and GPIO interface controls. The ADAU1401A programs can be loaded on power-up either from a serial EEPROM through its own self-boot mechanism or from an external microcontroller. On power-down, the current state of the parameters can be written back to the EEPROM from the ADAU1401A to be recalled the next time the program is run. Two - ADCs and four - DACs provide a 98.5 dB analog input to analog output dynamic. Each ADC has a THD + N of 83 dB and each DAC has a THD + N of 90 dB. Digital input and output ports allow a glueless connection to additional ADCs and DACs. The ADAU1401A communicates through an I2C bus or a 4-wire SPI port.

Applications Multimedia speaker systems MP3 player speaker docks Automotive head units Minicomponent stereos Digital televisions Studio monitors Speaker crossovers Musical instrument effects processors In-seat sound systems (aircraft/motor coaches) Features 28-/56-bit, 50 MIPS digital audio processor 2 ADCs: SNR of 100 dB, THD + N of 83 dB 4 DACs: SNR of 104 dB, THD + N of 90 dB Complete standalone operation Self-boot from serial EEPROM Auxiliary ADC with 4-input mux for analog control GPIOs for digital controls and outputs Fully programmable with SigmaStudio graphical tool 28-bit 28-bit multiplier with 56-bit accumulator for full doubleprecision processing Clock oscillator for generating master clock from crystal PLL for generating master clock from 64 fS, 256 fS, 384 fS, or 512 fS clocks Flexible serial data input/output ports with I2S-compatible, left-justified, right-justified, and TDM modes Sampling rates of up to 192 kHz supported On-chip voltage regulator for compatibility with 3.3 V systems 48-lead plastic LQFP

ADAU1401A Block Diagram

DIGITAL VDD 3.3V 3 DIGITAL GROUND 3 ANALOG VDD 3 ANALOG GROUND 2 PLL MODE 3 PLL LOOP FILTER CRYSTAL 2 PLL CLOCK OSCILLATOR 2 DAC 28-/56-BIT, 50MIPS AUDIO PROCESSOR CORE, 40ms DELAY MEMORY DAC FILTD/CM 4-CHANNEL ANALOG OUTPUT

2-CHANNEL ANALOG INPUT FILTA/ ADC_RES 2

1.8V REGULATOR STEREO ADC

ADAU1401A

RESET/ MODE SELECT

CONTROL INTERFACE AND SELF-BOOT

8-CHANNEL DIGITAL INPUT

8-BIT AUX ADC

GPIO

8-CHANNEL DIGITAL OUTPUT

INPUT/OUTPUT MATRIX 5 RESET SELF-BOOT I2C/SPI AND WRITEBACK 3 DIGITAL IN OR GPIO 3 AUX ADC OR GPIO 3 DIGITAL OUT OR GPIO

68

Embedded Processors and DSP Selection Guide

ADAU1442/ADAU1445/ADAU1446

SigmaDSP Digital Audio Processor with Flexible Audio Routing Matrix

The ADAU1442/ADAU1445/ADAU1446 are enhanced audio processors that allow full flexibility in routing all input and output signals. The SigmaDSP core features full 28-bit processing (56-bit in double-precision mode), synchronous parameter loading for ensuring filter stability, and 100% code efficiency with the SigmaStudio tools. This DSP allows system designers to compensate for the real-world limitations of speakers, amplifiers, and listening environments, resulting in a dramatic improvement of the perceived audio quality through speaker equalization, multiband compression, limiting, and third-party branded algorithms. The flexible audio routing matrix (FARM) allows the user to multiplex inputs from multiple sources running at various sample rates to or from the SigmaDSP core. This drastically reduces the complexity of signal routing and clocking issues in the audio system. FARM includes up to eight stereo asynchronous sample rate converters (depending on the device model), Sony/Philips digital interconnect format (S/PDIF) input and output, and serial (I2S) and time division multiplexing (TDM) I/Os. Any of these inputs can be routed to the SigmaDSP core or to any of the asynchronous sample rate converters (ASRCs). Similarly, any one of the output signals can be taken from the SigmaDSP core or from any of the ASRC outputs. This routing scheme, which can be modified at any time via control registers, allows for maximum system flexibility. The ADAU1442, ADAU1445, and ADAU1446 differ only in ASRC functionality and packaging. The ADAU1442/ADAU1445 contain 16 channels of ASRCs and are packaged in TQFP packages, whereas the ADAU1446 contains no ASRCs and is packaged in an LQFP. The ADAU1442 can handle nine clock domains, the ADAU1445 can handle three clock domains, and the ADAU1446 can handle one clock domain. The ADAU1442/ADAU1445/ADAU1446 can be controlled in one of two operational modes: the settings of the chip can be loaded and dynamically updated through the SPI/I2C port, or the DSP can self-boot from an external EEPROM in a system with no microcontroller. There is also a bank of multipurpose (MP) pins that can be used as generalpurpose digital I/Os or as inputs to the 4-channel auxiliary control ADC. The ADAU1442/ADAU1445/ADAU1446 are supported by the SigmaStudio graphical development environment. This software includes audio processing blocks such as FIR and IIR filters, dynamics processors, mixers, low level DSP functions, and third-party algorithms for fast development of custom signal flows.

Applications Automotive audio processing Head units Navigation systems Rear-seat entertainment systems DSP amplifiers (sound system amplifiers) Features Fully programmable audio digital signal processor (DSP) for enhanced sound processing Features SigmaStudio, a proprietary graphical programming tool for the development of custom signal flows 172 MHz SigmaDSP core; 3584 instructions per sample at 48 kHz 4k parameter RAM, 8k data RAM Flexible audio routing matrix (FARM) 24-channel digital input and output Up to 8 stereo asynchronous sample rate converters (from 1:8 up to 7.75:1 ratio and 139 dB DNR) Stereo S/PDIF input and output Supports serial and TDM I/O, up to fS = 192 kHz Multichannel byte-addressable TDM serial port Pool of 170 ms digital audio delay (at 48 kHz) Clock oscillator for generating master clock from crystal PLL for generating core clock from common audio clocks I2C and SPI control interfaces Standalone operation Self-boot from serial EEPROM 4-channel, 10-bit auxiliary control ADC Multipurpose pins for digital controls and outputs Easy implementation of available third-party algorithms On-chip regulator for generating 1.8 V from 3.3 V supply 100-lead TQFP and LQFP packages Temperature range: 40C to +105C

www.analog.com/processors

69

ADAU1442/ADAU1445/ADAU1446

SigmaDSP Digital Audio Processor with Flexible Audio Routing Matrix

ADAU1442/ADAU1445/ADAU1446 Block Diagram
SPI/I2C* SELFBOOT MP[11:4] MP[3:0]/ ADC[3:0]

XTALI

XTALO

ADAU1442/ ADAU1445/ ADAU1446

1.8V REGULATOR

I2C/SPI CONTROL INTERFACE AND SELF-BOOT

MP/ AUX ADC

PLL

CLOCK OSCILLATOR

CLKOUT

S/PDIFI

S/PDIF RECEIVER

PROGRAMMABLE AUDIO PROCESSOR CORE

S/PDIF TRANSMITTER

S/PDIFO

FLEXIBLE AUDIO ROUTING MATRIX (FARM)

SDATA_IN[8:0] (24-CHANNEL DIGITAL AUDIO INPUT)

SERIAL DATA INPUT PORT (9)

UP TO 16 CHANNELS OF ASYNCHRONOUS SAMPLE RATE CONVERTERS

SERIAL DATA OUTPUT PORT (9)

SDATA_OUT[8:0] (24-CHANNEL DIGITAL AUDIO OUTPUT)

BIT CLOCK (BCLK) FRAME CLOCK (LRCLK)

SERIAL CLOCK DOMAINS (12)

BIT CLOCK (BCLK) FRAME CLOCK (LRCLK)

*SPI/I2C = THE ADDR0, CLATCH, SCL/CCLK, SDA/COUT, AND ADDR1/CDATA PINS. THERE ARE 12-BIT CLOCKS (BCLK[11:0]) AND 12 FRAME CLOCKS (LRCLK[11:0]) IN TOTAL. OF THE 12 CLOCKS, SIX ARE ASSIGNABLE, THREE MUST BE OUTPUTS, AND THREE MUST BE INPUTS.

70

Embedded Processors and DSP Selection Guide

ADAU1461

SigmaDSP Stereo, Low Power, 96 kHz, 24-Bit Audio Codec with Integrated PLL for Automotive Applications

The ADAU1461 is a low power, stereo audio codec with integrated digital audio processing that supports stereo 48 kHz record and playback at 35 mW from a 3.3 V analog supply. The stereo audio ADCs and DACs support sample rates from 8 kHz to 96 kHz as well as a digital volume control. The SigmaDSP core features 28-bit processing (56-bit double precision). The processor allows system designers to compensate for the real-world limitations of microphones, speakers, amplifiers, and listening environments, resulting in a dramatic improvement in the perceived audio quality through equalization, multiband compression, limiting, and third-party branded algorithms. The SigmaStudio graphical development tool is used to program the ADAU1461. This software includes audio processing blocks such as filters, dynamics processors, mixers, and low level DSP functions for fast development of custom signal flows. The record path includes an integrated microphone bias circuit and six inputs. The inputs can be mixed and muxed before the ADC, or they can be configured to bypass the ADC. The ADAU1461 includes a stereo digital microphone input. The ADAU1461 includes five high power output drivers (two differential and three single-ended), supporting stereo headphones, an earpiece, or other output transducer. AC-coupled or capless configurations are supported. Individual fine level controls are supported on all analog outputs. The output mixer stage allows for flexible routing of audio. Applications Automotive head units Automotive amplifiers Navigation systems Rear-seat entertainment systems

Features SigmaDSP 28-/56-bit, 50 MIPS digital audio processor Fully programmable with SigmaStudio graphical tool 24-bit stereo audio ADC and DAC: >98 dB SNR Sampling rates from 8 kHz to 96 kHz Low power: 17 mW record, 18 mW playback, 48 kHz 6 analog input pins, configurable for single-ended or differential inputs Flexible analog input/output mixers Stereo digital microphone input Analog outputs: 2 differential stereo, 2 single-ended stereo, 1 mono headphone output driver PLL supporting input clocks from 8 MHz to 27 MHz Analog automatic level control (ALC) Microphone bias reference voltage Analog and digital I/O: 3.3 V I2C and SPI control interfaces Digital audio serial data I/O: stereo and time-division multiplexing (TDM) modes Software-controllable clickless mute GPIO pins for digital controls and outputs 32-lead, 5 mm 5 mm LFCSP 40C to +105C operating temperature range Qualified for automotive applications

ADAU1461 Block Diagram

DVDDOUT IOVDD DGND AGND AGND AVDD AVDD CM

JACKDET/MICIN

HP JACK DETECTION

REGULATOR

ADAU1461

LAUX LINP LINN RINP RINN RAUX MICROPHONE BIAS SERIAL DATA INPUT/OUTPUT PORTS LRCLK/ GPIO3 ADC_SDATA/ GPIO1 DAC_SDATA/ GPIO0 BCLK/ GPIO2 I2C/SPI CONTROL PORT INPUT MIXERS ALC ADC ADC DIGITAL FILTERS DAC DIGITAL FILTERS DAC OUTPUT MIXERS

LOUTP LOUTN LHP MONOOUT RHP ROUTP ROUTN

ADC

DAC

MICBIAS

PLL MCLK

ADDR0/ ADDR1/ SCL/ SDA/ CLATCH CDATA CCLK COUT

www.analog.com/processors

71

ADAU1701/ADAU1702

SigmaDSP 28-/56-Bit Audio Processor with Two ADCs and Four DACs

The ADAU1701/ADAU1702 are complete single-chip audio systems with a 28-/56-bit audio DSP, ADCs, DACs, and microcontroller-like control interfaces. Signal processing includes equalization, crossover, bass enhancement, multiband dynamics processing, delay compensation, speaker compensation, and stereo image widening and can be used to compensate for real-world limitations of speakers, amplifiers, and listening environments, providing dramatic improvements in perceived audio quality. Its signal processing is comparable to that found in high end studio equipment. Most processing is done in full 56-bit, double-precision mode, resulting in very good low level signal performance. The ADAU1701 is a fully programmable DSP. The easy to use SigmaStudio software allows the user to graphically configure a custom signal processing flow using blocks such as biquad filters, dynamics processors, level controls, and GPIO interface controls. ADAU1701/ADAU1702 programs can be loaded on power-up either from a serial EEPROM through its own self-boot mechanism or from an external microcontroller. On power-down, the current state of the parameters can be written back to the EEPROM from the ADAU1701 to be recalled the next time the program is run. Two - ADCs and four - DACs provide a 98.5 dB analog input to analog output dynamic. Each ADC has a THD + N of 83 dB and each DAC has a THD + N of 90 dB. Digital input and output ports allow a glueless connection to additional ADCs and DACs. The ADAU1701/ ADAU1702 communicates through an I2C bus or a 4-wire SPI port. The ADAU1701 has 1024 instructions/cycle in the program RAM and 2k words of data memory, while the ADAU1702 has 512 instructions/cycle and 0.5k words of data memory.

Applications Multimedia speaker systems MP3 player speaker docks Automotive head units Minicomponent stereos Digital televisions Studio monitors Speaker crossovers Musical instrument effects processors In-seat sound systems (aircraft/motor coaches) Features 28-/56-bit, 50 MIPS digital audio processor Two ADCs: SNR of 100 dB, THD + N of 83 dB Four DACs: SNR of 104 dB, THD + N of 90 dB Complete standalone operation Self-boot from serial EEPROM Auxiliary ADC with 4-input mux for analog control GPIOs for digital controls and outputs Fully programmable with SigmaStudio graphical tool 28-bit 28-bit multiplier with 56-bit accumulator for full double-precision processing Clock oscillator for generating master clock from crystal PLL for generating master clock from 64 fS, 256 fS, 384 fS, or 512 fS clocks Flexible serial data input/output ports with I2S-compatible, left-justified, right-justified, and TDM modes Sampling rates up to 192 kHz supported On-chip voltage regulator for compatibility with 3.3 V systems 48-lead, plastic LQFP

ADAU1701/ADAU1702 Block Diagram

DIGITAL VDD 3.3V 3 DIGITAL GROUND 3 ANALOG VDD 3 ANALOG GROUND 3 PLL MODE 3 PLL LOOP FILTER CRYSTAL 2

1.8V REGULATOR

PLL

CLOCK OSCILLATOR 2 DAC FILTD/CM

ADAU1701
2-CHANNEL ANALOG INPUT FILTA/ ADC_RES 2 STEREO ADC 28-/56-BIT, 50MIPS AUDIO PROCESSOR CORE 40ms DELAY MEMORY

DAC

4-CHANNEL ANALOG OUTPUT

RESET/ MODE SELECT

CONTROL INTERFACE AND SELFBOOT

8-CH DIGITAL INPUT

8-BIT AUX ADC

GPIO

8-CH DIGITAL OUTPUT

INPUT/OUTPUT MATRIX 5 RESET SELF BOOT I2C/SPI AND WRITEBACK 4 DIGITAL IN OR GPIO 4 AUX ADC OR GPIO 4 DIGITAL OUT OR GPIO

72

Embedded Processors and DSP Selection Guide

ADAU1761

SigmaDSP Stereo, Low Power, 96 kHz, 24-Bit Audio Codec with Integrated PLL

The ADAU1761 is a low power stereo audio codec with integrated digital audio processing that supports stereo 48 kHz record and playback at 14 mW from a 1.8 V analog supply. The stereo audio ADCs and DACs support sample rates from 8 kHz to 96 kHz as well as a digital volume control. The SigmaDSP core features 28-bit processing (56-bit double precision). The processor allows system designers to compensate for the realworld limitations of microphones, speakers, amplifiers, and listening environments, resulting in a dramatic improvement in the perceived audio quality through equalization, multiband compression, limiting, and third-party branded algorithms. The SigmaStudio graphical development tool is used to program the ADAU1761. This software includes audio processing blocks such as filters, dynamics processors, mixers, and low level DSP functions for fast development of custom signal flows. The record path includes an integrated microphone bias circuit and six inputs. The inputs can be mixed and muxed before the ADC, or they can be configured to bypass the ADC. The ADAU1761 includes a stereo digital microphone input. The ADAU1761 includes five high power output drivers (two differential and three single-ended), supporting stereo headphones, an earpiece, or other output transducer. AC-coupled or capless configurations are supported. Individual fine level controls are supported on all analog outputs. The output mixer stage allows for flexible routing of audio. Applications Smartphones/multimedia phones Digital still cameras/digital video cameras Portable media players/portable audio players Phone accessories products

Features SigmaDSP 28-/56-bit, 50 MIPS digital audio processor Fully programmable with SigmaStudio graphical tool 24-bit stereo audio ADC and DAC: >98 dB SNR Sampling rates from 8 kHz to 96 kHz Low power: 7 mW record, 7 mW playback, 48 kHz at 1.8 V 6 analog input pins, configurable for single-ended or differential inputs Flexible analog input/output mixers Stereo digital microphone input Analog outputs: 2 differential stereo, 2 single-ended stereo, 1 mono headphone output driver PLL supporting input clocks from 8 MHz to 27 MHz Analog automatic level control (ALC) Microphone bias reference voltage Analog and digital I/O: 1.8 V to 3.65 V I2C and SPI control interfaces Digital audio serial data I/O: stereo and time-division multiplexing (TDM) modes Software-controllable clickless mute Software power-down GPIO pins for digital controls and outputs 32-lead, 5 mm 5 mm LFCSP 40C to +85C operating temperature range

ADAU1761 Block Diagram

DVDDOUT IOVDD DGND AGND AGND AVDD AVDD

CM

JACKDET/MICIN

HP JACK DETECTION

REGULATOR

ADAU1761

LAUX LINP LINN RINP RINN RAUX MICBIAS MICROPHONE BIAS SERIAL DATA INPUT/OUTPUT PORTS LRCLK/ GPIO3 ADC_SDATA/ GPIO1 DAC_SDATA/ GPIO0 BCLK/ GPIO2
ADDR0/ CLATCH

LOUTP INPUT MIXERS ALC ADC ADC DIGITAL FILTERS DAC DIGITAL FILTERS DAC OUTPUT MIXERS LOUTN LHP MONOOUT RHP ROUTP ROUTN

ADC

DAC

PLL MCLK

I2C/SPI CONTROL PORT

ADDR1/ CDATA SCL/ CCLK SDA/ COUT

www.analog.com/processors

73

ADAU1781

SigmaDSP Low Noise Stereo Audio Codec for Portable Applications

The ADAU1781 is a low power, 24-bit stereo audio codec. The low noise DAC and ADC support sample rates from 8 kHz to 96 kHz. Low current draw and power saving modes make the ADAU1781 ideal for batterypowered audio applications. A programmable SigmaDSP core provides enhanced record and playback processing to improve overall audio quality. The record path includes two digital stereo microphone inputs and an analog stereo input path. The analog inputs can be configured for either a pseudo differential or a single-ended stereo source. A dedicated analog beep input signal can be mixed into any output path. The ADAU1781 includes a stereo line output and speaker driver, which makes the device capable of supporting dynamic speakers. The serial control bus supports the I2C or SPI protocols, and the serial audio bus is programmable for I2S, left-justified, right-justified, or TDM mode. A programmable PLL supports flexible clock generation for all standard rates and available master clocks from 11 MHz to 20 MHz. Applications Digital still cameras Digital video cameras

Features 24-bit stereo audio ADC and DAC 400 mW speaker amplifier (into 8 load) Programmable SigmaDSP audio processing core Wind noise detection and filtering Enhanced stereo capture (ESC) Dynamics processing Equalization and filtering Volume control and mute Sampling rates from 8 kHz to 96 kHz Stereo pseudo differential microphone input Optional stereo digital microphone input pulse-density modulation (PDM) Stereo line output PLL supporting a range of input clock rates Analog and digital I/O 1.8 V to 3.3 V Software control via SigmaStudio graphical user interface Software-controllable, clickless mute Software register and hardware pin standby mode 32-lead, 5 mm 5 mm LFCSP

ADAU1781 Block Diagram

DVDDOUT AGND1 AGND2 AVDD1 AVDD2 IOVDD DGND CM

REGULATOR BEEP PGA

ADAU1781

LMIC/LMICN/ MICD1 LMICP RMIC/RMICN/ MICD2 RMICP PDN MICBIAS MICROPHONE BIAS PLL PGA RIGHT ADC PGA LEFT ADC

SigmaDSP CORE
WIND NOISE NOTCH FILTER EQUALIZER DIGITAL VOLUME CONTROL DYNAMIC PROCESSING RIGHT DAC LEFT DAC

AOUTL AOUTR OUTPUT MIXER

SPP SPN

SERIAL DATA INPUT/OUTPUT PORTS

I2C/SPI CONTROL PORT

ADDR0/CDATA

LRCLK/GPIO3

ADC_SDATA/ GPIO1

DAC_SDATA/ GPIO0

ADDR1/CLATCH

MCKI

BCLK/GPIO2

SCL/CCLK

74

Embedded Processors and DSP Selection Guide

SDA/COUT

SigmaStudio

Graphical Development Tool for SigmaDSP

The SigmaStudio graphical development tool is the programming, development, and tuning software for the SigmaDSP audio processors. Familiar audio processing blocks can be wired together as in a schematic, and the compiler generates DSP-ready code and a control surface for setting and tuning parameters. This tool allows engineers with no DSP code writing experience to easily implement a DSP into their design and yet is still powerful enough to satisfy the demands of experienced DSP designers. SigmaStudio links with both Analog Devices evaluation boards and production designs to provide full in-circuit real-time IC control. SigmaStudio includes an extensive library of algorithms to perform audio processing such as filtering, mixing, and dynamics processing, as well as basic low level DSP functions and control blocks. Advanced record-side processing algorithms such as enhanced stereo capture and wind noise detection are included in the standard libraries. Plug-in algorithms from Analog Devices and third-party partners can be added to SigmaStudios drag-and-drop library. Along with its graphical DSP signal flow development, SigmaStudio also includes other features to speed up the design cycle from product concept to release. SigmaStudio includes tools for intuitively setting control registers, calculating tables of filter coefficients, visualizing filter magnitude and phase responses, generating C header files, and sequencing a series of controls to ease your transition from SigmaStudio to system implementation on your microcontroller. The latest version of SigmaStudio is available to download directly from the ADI website. The full set of signal processing libraries and features are included with the downloadable version.

Features Included algorithms IIR filters FIR filters Dynamics processors Volume controls Mixers, splitters Muxes, demuxes Sources GPIO conditioning Counters Basic DSP functions

www.analog.com/processors

75

SigmaDSP Audio Processors

SigmaDSP Evaulation Boards

Description Full-featured AD1940 SigmaDSP evaluation board with AD1939 and AD1974 codecs. It provides buffered analog inputs and ouptuts as well as S/PDIF and digital I2S/TDM connectors. 6 V power supply and USBi are included in the package.

Product Other ADI Alternate Product Components AD1940 AD1941 (uses I2C instead of SPI) AD1940 AD1938, ADP3336, ADM811, ADA4841 AD1939, AD1974, AD8606, ADP3339

Model

Analog In Analog Out 3 stereo TRS (3.5 mm) 4 stereo TRS (3.5 mm) 1 stereo TRS (3.5 mm)

GPIO

Digital I/O DC Supply USBi-I2C/SPI, S/PDIF I/O, I2S I/O (4/8, TDM) 6V USBi-I2C/SPI, I2S-I/O (1/3, TDM)

Price ($U.S.)

EVALAD1940AZ

699.00

EVAL-AD1940MINIBZ

Small AD1940 SigmaDSP evaluation board with AD1938 codec and buffered analog inputs and outputs. 6 V power supply and USBi are included in the package. This is the recommended evaluation board for the AD1940. The EVAL-AD1940AZ can be used if this board lacks some necessary functionality or interface.

AD1941 (uses I C instead of SPI)

2

399.00 3 stereo TRS (3.5 mm) 6V

ADAU1401 EVAL-ADAU1401EBZ Full-featured ADAU1401 SigmaDSP evaluation board that operates all of the ADAU1401/ADAU1701/ADAU1702s functions with a full range of analog and digital inputs and outputs as well as a self-boot EEPROM. USBi, 6 V power supply, and an attachable GPIO control board are included in the package. ADAU1701 (not automotive qualified)

1 stereo TRS (3.5 mm) or RCA AD8608, ADM811

ADAU1702 (not automotive qualified and has less memory) Small ADAU1701 SigmaDSP evaluation board with self-boot EEPROM ADAU1701 and stereo 2 W Class-D amplifier. USBi is included in the package ADAU1401 and it provides the 5 V power supply for the board. This is the (automotive qualified) recommended board for evaluation of the ADAU1701 and ADAU1702. ADAU1702 The EVAL-ADAU1401EBZ can be used if this board lacks some (has less memory) necessary functionality or interface. Full-featured ADAU1442 SigmaDSP evaluation board with a full set of analog and digital input/output connections, including I2S, TDM, and S/PDIF. USBi, 6 V power supply, and an attachable GPIO control board are included in the package. ADAU1442 ADAU1445 (has less SRCs)

2 stereo TRS (3.5 mm) or RCA

Rotary encoder, potentiometer, switches, push buttons, potentiometers, LEDs

USBi-I2C/SPI, S/PDIF I/O, I2S-I/O (TDM)

699.00 6V

EVALADAU1701MINIZ

1 stereo TRS (3.5 mm) SSM2306, ADM811, ADP3336 Stereo speaker, 1 stereo TRS (3.5 mm) 3 LED, 3 push button, 1 potentiometer

USBi-I2C/SPI 195.00

5V

AD1938 (2), AD8608, ADP3336, ADP3339, ADM811 AD1938 (2), AD8608, ADP3336, ADP3339, ADM811

EVALADAU1442EBZ

4 stereo TRS (3.5 mm)

8 stereo TRS (3.5 mm)

Full-featured ADAU1446 SigmaDSP evaluation board with a full set of analog and digital input/output connections, including I2S, TDM, and S/PDIF. USBi, 6 V power supply, and an attachable GPIO control board are included in the package.

4 stereo TRS (3.5 mm)

ADAU1446

8 stereo TRS (3.5 mm) 2 differential TRS, 1 stereo TRS (3.5 mm)

ADAU1761 EVAL-ADAU1761Z Full-featured ADAU1761 SigmaDSP evaluation board that operates most functions of the ADAU1761 with a full range of analog and digital inputs and outputs including the digital microphone and capless headphones. USBi is included in the package and it provides the 5 V power supply for the board. ADAU1461 (automotive qualified) ADAU1361 (has no SigmaDSPemulation possible with ADAU1761) AD1938 (2), AD8608, ADP3336

Rotary encoder, USBi-I2C/SPI, S/PDIF potentiometer, I/O, I2S-I/O (TDM) switches, 699.00 push buttons, 6V potentiometers, LEDs Rotary encoder, USBi-I2C/SPI, potentiometer, S/PDIF I/O, I2S-I/O switches, (TDM) 699.00 push buttons, potentiometers, 6V LEDs USBi-I2C, I2S-I/O (1/1, TDM), stereo digital mic Push buttons, LEDs, switches 5V 195.00

EVALADAU1446EBZ

2 differential and stereo TRS, 1 stereo headphone TRS (3.5 mm)

Full-featured ADAU1781 SigmaDSP evaluation board that operates all functions of the ADAU1781 with a full range of analog and digital inputs and outputs including digital microphones and capless headphones. MEMS microphones and a speaker are included on the PCB. USBi is included in the package and it can provide the 5 V power supply for the board.

2 differential TRS, 1 stereo TRS (3.5 mm), ADAU1781 1 mono beep TRS (3.5 mm), 2 ADMP401 ADMP401 (2), ADP1711, omni MEMS microphones ADP3339, ADAU1381/ 1 stereo headphone TRS AD8397 ADAU1382 (3.5 mm), mono speaker (have no SigmaDSPout, built-in mono emulation possible speaker with ADAU1761)

EVAL-ADAU1781Z

USBi-I2C/SPI, I2S-I/O (1/1, TDM), stereo digital mic Push buttons, LEDs 5V 195.00

USB to I2C/SPI interface board, also called USBi. This board connects to all SigmaDSP evaluation boards and provides the USB to I2C/SPI conversion. It is the interface between the SigmaDSP evaluation boards and the SigmaStudio software tools. USBi is included with all SigmaDSP evaluation boards but can also be ordered seperately. It ships with USB cable. The SigmaStudio tools package is ADIs award winning software for graphically programming SigmaDSP ICs and controlling evaluation boards. This software should be used with all SigmaDSP evaluation boards and is provided free of charge to evaluation board users.

EVAL-ADUSB2EBZ USBi

USB input, I2C/SPI output 95.00 5 V (USB)

SigmaStudio

Free

76

Embedded Processors and DSP Selection Guide

TigerSHARC Processor Family

Highest Performance Processor for Multiprocessor Systems

The TigerSHARC processor family offers the industrys highest performance per watt and per square inch of board space for the most demanding signal and image processing applications. Its patented link port technology allows glueless interprocessor communication within arrays of two or more TigerSHARC processors, delivering unbounded performance in terms of MMACS and MFLOPS. Based on a 128-bit static superscalar architecture, TigerSHARC processors offer native support of fixed- and floating-point data types and a balanced combination of computational performance, I/O bandwidth, and memory integration. Together, this yields sustained DSP system-level performance that is two to four times greater than conventional DSPs or microprocessors with vector processing units. By providing native support for 1-bit data formats used for chip-rate processing, TigerSHARC pioneers a new class of software-defined radios and serves applications that were previously the exclusive domain of expensive ASICs (application-specific integrated circuits) and FPGAs (fieldprogrammable gate arrays). And by moving to a software-centric design model, TigerSHARC processors allow IP reuse, which greatly enhances R&D productivity throughout each successive product generation. The TigerSHARC processors provide a broad range of price and performance points to meet the needs of many different applications. The ADSp-TS201 is offered at 500 MHz and 600 MHz with 24 Mb of on-chip memory, while the ADSP-TS202 and ADSP-TS203 are offered at 500 MHz with 12 Mb and 4 Mb of on-chip memory, respectively.

Soft Baseband Platform

The TigerSHARC processor supports the massive signal processing and memory demands of communications baseband modem implementations. It is the first general-purpose processor capable of homogeneous, low cost, flexible, and scalable baseband implementations without the use of external ASICs or memory and does not require an internal hardware accelerator. The TigerSHARC processor is designed specifically to handle all of the demands of a various baseband implementation from a MIPS, memory, and I/O perspective. This enables a compact, homogeneous implementation with a simple control interface that is flexible, scalable, and low cost.

TigerSHARC Processor Product Portfolio

TigerSHARC Processor Family Selection Table

Performance Part Number Clock Speeds (MHz) 500 ADSP-TS201 600 ADSP-TS202 ADSP-TS203 500 500 250 ADSP-TS101 300 MMACS 4000 (16-bit) 1000 (32-bit) 4800 (16-bit) 1200 (32-bit) 4000 (16-bit) 1000 (32-bit) 4000 (16-bit) 1000 (32-bit) 2000 (16-bit) 500 (32-bit) 2400 (16-bit) 600 (32-bit) Memory Peripheral Options Voltage (V) Nominal Packaging and Temperature Range Options2, 3 Package 2, 3 Price Temperature @ 1k Availability Range (Non($U.S.) 4 Automotive Grade) 40C to +105C 40C to +85C 40C to +85C 40C to +85C 40C to +85C 252.25 277.47 209.51 184.49 193.88 40C to +85C 231.40 Production Production Total Core DMA On-Chip External Number Core VDDINT External Power Typ L1 DRAM Memory Type (Channels) Ports/Features Timers (mW)1 of GPIOs (Max Speed) (I/O) (Bits) Supported 1.05 24M 14 12M 4M 6M (SRAM) 6M (SRAM) Async, SDRAM 4 LVDS link ports, host port, cluster bus (up to 8) 1.20 4 2 1.05 1.05 1.25 4 1 1.25 3.3 1875 2.5, 1.5 DRAM 2.5, 1.5 DRAM 2.5, 1.6 DRAM 2163 3480 2163 2163 1500

25 mm 25 mm, 1.0 mm, 576-ball BGA_ED 25 mm 25 mm, 1.0 mm, 576-ball BGA_ED 25 mm 25 mm, 1.0 mm, 576-ball BGA_ED 27 mm 27 mm, 1.0 mm, 625-ball PBGA; 19 mm 19 mm, 0.8 mm, 484-ball PBGA

10

2 LVDS link ports, host port, cluster bus (up to 8) 4 link ports, host port, cluster bus (up to 8)

Async

14

NOTES 1 Power (mW) stated for maximum core operating speed of the device at TCASE = 25C (VDD nominal, IDD-TYP supply current). Please refer to associated data sheet and EE notes for further details and complete power calculation information.
2 3 4

All DSP products available in RoHS compliant options. Please refer to data sheet for complete information. All packaging, operating temperature, and grade combinations may not be available. Please refer to data sheet for full information and contact ADI for options outside those listed. Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade.

www.analog.com/processors

77

ADSP-TS203 TigerSHARC Processor

500 MHz Processor with 4 Mb On-Chip DRAM

The ADSP-TS203 TigerSHARC processor is targeted at numerous signal processing applications that rely on multiple processors working together to execute computationally intensive, real-time functions. The TigerSHARC processor is well-suited to video applications as well as defense, medical imaging, and industrial instrumentation. The ADSP-TS203 features a static superscalar architecture that combines RISC, VLIW, and standard DSP functionality. Native support of fixed- and floating-point data types, coupled with leading-edge multiprocessing capabilities, allows the TigerSHARC processor to offer unrivaled performance. At a 500 MHz clock rate, the ADSP-TS203 offers the industrys highest 16-bit fixed-point and 32-bit floating-point performance. The ADSP-TS203 has a 32-bit floating-point 1024-point complex FFT time of 18.8 s and provides 1000 MFLOPS per watt. Features Static superscalar architecture that supports 1-, 8-, 16-, and 32-bit fixed-point, as well as floating-point, data processing High performance 500 MHz, 2 ns instruction rate processor core 4 Mb on-chip embedded DRAM internally organized in 6 banks with user-defined partitioning 10-channel, zero-overhead DMA controller 4 internal 128-bit wide internal buses providing a total memory bandwidth of 32 GBps Single-instruction, multiple-data (SIMD) operation supported by 2 computation blocks, each with an ALU, multiplier, shifter, and 32-word register file 2 LVDS link ports with each operating up to 250 MBps per direction for serial interfacing 32-bit cluster bus with operation up to 500 MBps for parallel interfacing Assembly and C language programmability Core voltage: 1.05 V Applications Video Medical imaging Industrial and instrumentation Military On-Chip Memory DRAM (Mb) 4 4 Price Range @ 1k ($U.S.)1 184.49 to 206.89

ADSP-TS203 Performance
500 MHz, 2 ns instruction rate processor core Executes eight 16-bit MACs with 40-bit accumulation per cycle or two 32-bit MACs with 80-bit accumulation per cycle Executes six single-precision floating-point, or twenty-four 16-bit, fixed-point operations per cycle (3.0 GFLOPS or 12.0 GOPS performance) 2-cycle, interlocked execution pipe Parallelism allows the execution of up to four 32-bit instructions per cycle

Part Number ADSP-TS203SABP-050 ADSP-TS203SABPZ050

Max (MHz) 500 500

Package 576-ball PBGA 576-ball PBGA

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. A = industrial temperature (40C to +85C case). Z = RoHS compliant part.

78

Embedded Processors and DSP Selection Guide

ADSP-TS202 TigerSHARC Processor

500 MHz Processor with 12 Mb On-Chip DRAM

The ADSP-TS202 TigerSHARC processor is targeted at numerous signal processing applications that rely on multiple processors working together to execute computationally intensive, real-time functions. The TigerSHARC processor is well-suited to video and communication applications as well as defense, medical imaging, and industrial instrumentation. The ADSP-TS202 features a static superscalar architecture that combines RISC, VLIW, and standard DSP functionality. Native support of fixed- and floating-point data types, coupled with leading-edge multiprocessing capabilities, allows the TigerSHARC processor to offer unrivaled performance. At a 500 MHz clock rate, the ADSP-TS202 offers the industrys highest 16-bit fixed-point and 32-bit floating-point performance. The ADSP-TS202 has a 32-bit floating-point 1024-point complex FFT time of 18.8 s and provides 1000 MFLOPS per watt. Features Static superscalar architecture that supports 1-, 8-, 16-, and 32-bit fixed-point, as well as floating-point, data processing High performance, 500 MHz, 2 ns instruction rate processor core 12 Mb on-chip embedded DRAM internally organized in 6 banks with user-defined partitioning 14-channel, zero-overhead DMA controller 4 internal 128-bit wide internal buses, providing a total memory bandwidth of 32.0 GBps SIMD operation supported by 2 computation blocks, each with an ALU, multiplier, shifter, and 32-word register file 4 LVDS link ports with each operating up to 500 MBps per direction for serial interfacing Configurable cluster bus (32- or 64-bit) with operation up to 1 GBps for parallel interfacing Assembly and C language programmability Core voltage: 1.05 V Applications Communications Video Medical imaging Industrial and instrumentation Military On-Chip Memory DRAM (Mb) 12 Price @ 1k ($U.S.)1 209.51

ADSP-TS202 Performance
500 MHz, 2 ns instruction rate processor core Executes eight 16-bit MACs with 40-bit accumulation per cycle or two 32-bit MACs with 80-bit accumulation per cycle Executes six single-precision floating-point, or twenty-four 16-bit fixedpoint, operations per cycle (3.0 GFLOPS or 12.0 GOPS performance) 2-cycle, interlocked execution pipe Parallelism allows the execution of up to four 32-bit instructions per cycle

Part Number ADSP-TS202SABPZ050

Max (MHz) 500

Package 576-ball PBGA

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. A = industrial temperature (40C to +85C case). Z = RoHS compliant part.

www.analog.com/processors

79

ADSP-TS201 TigerSHARC Processor

600 MHz Processor with 24 Mb On-Chip DRAM

The ADSP-TS201 is targeted at numerous signal processing applications that rely on multiple processors working together to execute computationally intensive, real-time functions. The TigerSHARC processor is well-suited to video and communication markets, including the 3G cellular and broadband wireless base stations, as well as defense, medical imaging, and industrial instrumentation. The ADSP-TS201 features a static superscalar architecture that combines RISC, VLIW, and standard DSP functionality. Native support of fixed- and floating-point data types, coupled with leading-edge multiprocessing capabilities, allows the TigerSHARC processor to offer unrivaled performance. At a 600 MHz clock rate, the ADSP-TS201 offers the industrys highest 16-bit fixed-point and 32-bit floating-point performance. The ADSP-TS201 has a 32-bit floating-point 1024-point complex FFT time of 15.7 s and provides 1000 MFLOPS per watt. Features Static superscalar architecture that supports 1-, 8-, 16-, and 32-bit fixed-point, as well as floating-point, data processing High performance, 600 MHz, 1.67 ns instruction rate processor core 24 Mb on-chip embedded DRAM internally organized in 6 banks with user-defined partitioning 14-channel, zero-overhead DMA controller Enhanced communications instruction set for wireless infrastructure applications allows for the TigerSHARC processor to offer complete baseband processing 4 internal 128-bit wide internal buses, providing a total memory bandwidth of 38.4 GBps Software radio approach allows the adoption of a single platform for multiple wireless telecommunication standards SIMD operation supported by 2 computation blocks, each with an ALU, multiplier, shifter, and 32-word register file 4 LVDS link ports with each operating up to 500 MBps per direction for serial interfacing Configurable cluster bus (32- or 64-bit) with operation up to 1 GBps for parallel interfacing Assembly and C language programmability Core voltage: 1.05 V (500 MHz) or 1.2 V (600 MHz)

ADSP-TS201 Performance
Executes eight 16-bit MACs with 40-bit accumulation per cycle or two 32-bit MACs with 80-bit accumulation per cycle Executes six single-precision floating-point, or twenty-four 16-bit fixed-point, operations per cycle (3.6 GFLOPS or 14.4 GOPS) 2-cycle, interlocked execution pipe Parallelism allows the execution of up to four 32-bit instructions per cycle Applications Wireless infrastructure Performance driven embedded applications
Military hardware Medical equipment Industrial and instrumentation Software-defined radios

ADSP-TS201 Block Diagram

SOC BUS

PROGRAM SEQUENCER
ADDR FETCH

DATA ADDRESS GENERATION

INTEGER J ALU 32 32
32 32

24 Mb INTERNAL MEMORY
MEMORY BLOCKS (PAGE CACHE)
4 CROSSBAR CONNECT

JTAG

JTAG PORT EXTERNAL PORT

INTEGER K ALU 32 32 128

HOST MULTIPROC SDRAM CTRL

J-BUS DATA BTB

K-BUS DATA

128 FLYBY SOC INTERFACE DMA

PC

I-BUS DATA

128

LINK PORTS
IN L0 OUT IN OUT IN L2

IAB

S-BUS DATA

128

L1

128

128 128

OUT IN OUT

MULTIPLIER

MULTIPLIER

X REGISTER FILE 32 32

128

DAB

DAB

Y REGISTER FILE 32 32

SHIFTER

SHIFTER

ALU

CLU

COMPUTATIONAL BLOCKS

Part Number ADSP-TS201SABP-050 ADSP-TS201SABP-060 ADSP-TS201SABPZ050 ADSP-TS201SABPZ060 ADSP-TS201SYBP-050 ADSP-TS201SYBPZ050

Max (MHz) 500 600 500 600 500 500

On-Chip Memory DRAM (Mb) 24 24 24 24 24 24

Package 576-ball PBGA 576-ball PBGA 576-ball PBGA 576-ball PBGA 576-ball PBGA 576-ball PBGA

Price Range @ 1k ($U.S.)1

252.25 to 339.43

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. A = industrial temperature (40C to +85C case). Y = automotive temperature (40C to +105C case). Z = RoHS compliant part.

80

Embedded Processors and DSP Selection Guide

CLU

ALU

L3

ADSP-TS101 TigerSHARC Processor

300 MHz Processor with 6 Mb On-Chip SRAM

The ADSP-TS101 is the first member of the TigerSHARC processor family. It is targeted at numerous signal processing applications that rely on multiple processors working together to execute computationally intensive, real-time functions. The ADSP-TS101 features a static superscalar architecture that combines RISC, VLIW, and standard DSP functionality. Native support of fixed- and floating-point data types, coupled with leading-edge multiprocessing capabilities, allows the TigerSHARC processor to offer unrivaled performance. At a 300 MHz clock rate, the ADSP-TS101 offers the 16-bit fixed-point performance and a 32-bit floating-point 1024-point complex FFT time of 32.5 s and 1000 MFLOPS per watt. Features Static superscalar architecture supports 1-, 8-, 16-, and 32-bit fixed-point, as well as floating-point, data processing SIMD operation supported by two computation blocks, each with an ALU, multiplier, shifter, and 32-word register file Assembly and C language programmability Up to 300 MHz, 3.3 ns instruction rate processor core 6 Mb on-chip SRAM internally organized in 3 banks with user-defined partitioning 14-channel, zero-overhead DMA controller 4 LVTLL link ports operating up to 250 MBps for serial interfacing Configurable cluster bus (32- or 64-bit) with operation up to 800 MBps for parallel interfacing Enhanced communications instruction set for wireless infrastructure applications for complete baseband processing 3 internal 128-bit wide internal buses, providing a total memory bandwidth of 14.4 GBps Software radio approach allows for the adoption of a single platform for multiple wireless telecommunication standards Core voltage: 1.2 V

ADSP-TS101 Performance
Executes eight 16-bit MACs with 40-bit accumulation per cycle or two 32-bit MACs with 80-bit accumulation per cycle Executes six single-precision floating-point, or twenty-four 16-bit, fixed-point operations per cycle (1800 MFLOPS or 7.2 GOPS performance) Parallelism allows the execution of up to four 32-bit instructions per cycle Applications Wireless infrastructure Medical, CT, ultrasound Sonar and radar systems Flight simulators Infrastructure equipment Military smart munitions Test equipment Imaging, printers Wireless broadband access Industrial applications Part Number ADSP-TS101SAB1-000 ADSP-TS101SAB1-100 ADSP-TS101SAB1Z000 ADSP-TS101SAB1Z100 ADSP-TS101SAB2-000 ADSP-TS101SAB2-100 ADSP-TS101SAB2Z000 ADSP-TS101SAB2Z100 Max (MHz) 250 300 250 300 250 300 250 300

On-Chip Memory SRAM (Mb) 6 6 6 6 6 6 6 6

Package 625-ball PBGA 625-ball PBGA 625-ball PBGA 625-ball PBGA 484-ball PBGA 484-ball PBGA 484-ball PBGA 484-ball PBGA

Price Range @ 1k ($U.S.)1

193.88 to 259.49

NOTES 1 Prices are quoted in U.S. dollars and represent year 2011 suggested resale pricing. All prices are budgetary and subject to change. Customers are advised to obtain the most current and complete pricing information from ADI prior to placing orders. Prices shown indicate a price range and will vary depending on speed, package type, and/or temperature range and grade. A = industrial temperature (40C to +85C case). Z = RoHS compliant part.

www.analog.com/processors

81

Analog Devices, Inc. Worldwide Headquarters Analog Devices, Inc. One Technology Way P.O. Box 9106 Norwood, MA 02062-9106 U.S.A. Tel: 781.329.4700 (800.262.5643, U.S.A. only) Fax: 781.461.3113 Analog Devices, Inc. Europe Headquarters Analog Devices, Inc. Wilhelm-Wagenfeld-Str. 6 80807 Munich Germany Tel: 49.89.76903.0 Fax: 49.89.76903.157 Analog Devices, Inc. Japan Headquarters Analog Devices, KK New Pier Takeshiba South Tower Building 1-16-1 Kaigan, Minato-ku, Tokyo, 105-6891 Japan Tel: 813.5402.8200 Fax: 813.5402.1064 Analog Devices, Inc. Southeast Asia Headquarters Analog Devices 22/F One Corporate Avenue 222 Hu Bin Road Shanghai, 200021 China Tel: 86.21.2320.8000 Fax: 86.21.2320.8222

2011 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. Printed in the U.S.A. G02458-1.5-10/11(W)

www.analog.com/processors