Scribd
Upload
435 views

Machining Processes and Metrology Question Paper

This document is a model question paper for a Machining Processes and Metrology exam for a B.Tech Mechanical Engineering course. It contains two sections with multiple choice and written answer questions. Section A contains 10 multiple choice questions covering topics like chip formation, broaching, tool signatures, cutter types, grinding wheel dressing, and precision measurement. Section B contains 5 longer answer questions, asking students to discuss tool wear mechanisms, the Merchant's circle diagram, radial drilling machines, gear generating processes, abrasive jet machining, and precision measurement tools like the tool makers' microscope and mechanical comparator.

Uploaded by

Harshan Arumugam
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
435 views

Machining Processes and Metrology Question Paper

This document is a model question paper for a Machining Processes and Metrology exam for a B.Tech Mechanical Engineering course. It contains two sections with multiple choice and written answer questions. Section A contains 10 multiple choice questions covering topics like chip formation, broaching, tool signatures, cutter types, grinding wheel dressing, and precision measurement. Section B contains 5 longer answer questions, asking students to discuss tool wear mechanisms, the Merchant's circle diagram, radial drilling machines, gear generating processes, abrasive jet machining, and precision measurement tools like the tool makers' microscope and mechanical comparator.

Uploaded by

Harshan Arumugam
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

VIT

UNIVERSITY
(Estd. u/s 3 of UGC Act 1956)

SCHOOL OF MECHANICAL AND BUILDING SCIENCES Model Question paper (Term End Examination) B.Tech. Mechanical Engineering Course: Machining Processes and Metrology (MEE 217) Time : Three Hours PART A (10 x 4 = 40 Marks) Answer All the questions
1. 2.

Max. Marks: 100

Discuss the mechanism of chip formation during turning process. Define: Machinability. Write an example for evaluating the machinability rate. Draw a Pull Type Broach and mention its specification.

3. What is meant by Tool Signature? List the elements with suitable numerical values.
4.

5. Differentiate between a solid cutter and tipped solid cutter. Give Examples. 6. Explain the need for Dressing and Truing of grinding wheels. 7. List any four Gear Finishing methods and write their capabilities. 8. Illustrate how thread cutting can be performed using Laser Beam. 9. How would you express the four basic grades of gage blocks? Write one application for each grade.
10.

Draw the setup showing the use of a Sine bar for precision measurement of workpiece angles.

PART B (5 x 12 = 60 Marks) Answer All the questions 11 a) Discuss in detail about various mechanism of tool wear. Illustrate the formation of flank wear with suitable sketches. Or b) Draw a Merchants Circle Diagram indicating all the elements. Write the related equations to determine the quantitative values of all the elements mentioned in the diagram.

12 a) Draw a radial drilling machine and explain the constructional & operational features. Or b) List any six work holding devices that can be used in a Lathe and draw suitable sketches to illustrate their application. 13 a) Illustrate the up milling and down milling processes with suitable sketches. Or b) Explain the various bond and bonding processes that are available for manufacturing grinding wheels. 14 a) Briefly explain about any two gear generating methods with simple sketches. Or b) Draw the schematic view of the equipment used for abrasive jet machining process and explain the working principle. 15 a) Explain the working principle of Tool Makers Microscope with the illumination drawing. Or b) Illustrate the working principle of mechanical comparator with a neat sketch.

You might also like