Scribd
Upload
67 views

Program 17: Find Square of An 8-Bit Number

This document discusses a program for the 8085 microprocessor that finds the square of an 8-bit number stored in memory by adding the number to itself repeatedly and decrementing a counter register. The program flowchart and assembly language instructions are provided along with explanations of how it works.

Uploaded by

Abhijeet Sinha
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
67 views

Program 17: Find Square of An 8-Bit Number

This document discusses a program for the 8085 microprocessor that finds the square of an 8-bit number stored in memory by adding the number to itself repeatedly and decrementing a counter register. The program flowchart and assembly language instructions are provided along with explanations of how it works.

Uploaded by

Abhijeet Sinha
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

8085 Programs

Program 17: Find square of an 8-bit number. Flowchart: Start

Load H-L pair with the address of operands memory location. Move the operand from memory to register B.

Move the same operand from register B to register C.

Initialize register A with 0.

Add B with A.

Decrement register C.

No

Is C = 0?

Yes Increment H-L pair.

Move the result from accumulator to memory.

Stop

Gursharan Singh Tatla

Page 1 of 3

8085 Programs

Program: Address 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 200A 200B 200C 200D 200E Explanation: This program finds the square of an 8-bit number stored in memory location 3000H. The square of a number is found by multiplying it by itself. Therefore, the number is added with itself and is also used as counter. Let us assume that the operands stored at memory location 3000H is 03H. Then, by using successive addition method, we get 03H + 03H + 03H = 09H. Initially, H-L pair is loaded with the address of the operand. The operand is moved to register B from memory location 3000H and then it is copied to register C. Accumulator is initialized to 00H. Register B is added with accumulator and the result is stored in accumulator. Register C (counter) is decremented by 1. Then, counter is checked for zero. If it hasnt become zero yet, then register B is again added with accumulator, and counter is again checked for zero. If counter becomes zero, then H-L pair is incremented and the result is moved from accumulator to memory location 3001H. INX MOV HLT H M, A ADD DCR JNZ B C 2007H MOV MOV MVI B, M C, M A, 00H Mnemonics LXI Operand H, 3000H Opcode 21 00 30 46 4E 3E 00 80 0D C2 07 20 23 77 76 Remarks Load H-L pair with address 3000H. Lower-order of 3000H. Higher-order of 3000H. Move the operand from memory to reg. B. Move the same number from reg. B to reg. C. Initialize accumulator with 00H. Immediate value 00H. Add B with A. Decrement reg. C (counter). Jump back to address 2007H if C 0. Lower-order of 2007H. Higher-order of 2007H. Increment H-L pair. Move the result from accumulator to memory. Halt.

Gursharan Singh Tatla

Page 2 of 3

8085 Programs

Output: Before Execution: 3000H: 03H

After Execution: 3001H: 09H

Gursharan Singh Tatla

Page 3 of 3

You might also like