2N SIP Speaker: Far More Than Just IP Paging
2N SIP Speaker: Far More Than Just IP Paging
2N SIP Speaker provides an ideal and cost effective solution for Public Address Systems and IP Paging and offers increased safety and security as access control anywhere one requires high quality audio communication and IP paging and intercom capabilities. One can deploy 2N SIP Speaker with existing or installed loudspeakers as a simple Public Address System or as a two-way intercom with attached microphone. With the combination of Standards-based Session Initiation Protocol (SIP) and Multicast, one has the option of sending public announcements to all the devices on the network or selecting individual zones or groups for calling specific devices. 2N SIP Speaker offers a variety of options for interconnection as in video and audio management systems or controlling lights, alarm systems and entry gates and much more. Take a look whats available!
Features:
Standalone unit no need for server Universal input and output Power supply via PoE or adapter Possibility of call initialisation Audio surveillance via RTSP Powerful built-in amplifier and line out Input for external microphone
Benefits:
Effective public address device Utilisation of existing LAN/WAN network Web interface or unified software for centralised configuration Remote control
Target Groups:
Offices and stores Government offices Shopping centres Sports grounds Parking lots and secured areas
If you are interested in our product, please call +420 261 301 500 or email us at [email protected]. For more information visit www.2n.cz.
Basic interconnection
Lighting
2N SIP Speaker
LAN
2N SIP Speaker
Internet
Sensor
Remote control of switches A switch in a 2N SIP Speaker can be controlled from another system using simple commands sent by HTTP protocol. Practical use: One example of use may be, for example, integration in a home automation system. The electric locks of entry doors can be controlled from a central panel independently of a call. IP Relay 2N SIP Speaker can control IP relay connected to the same LAN as 2N SIP Speaker. Relay is controlled by the same way as a normal relay inside of 2N SIP Speaker you just have to specify its IP address and user command. Practical use: IP Relay can be used in case you dont want to connect door lock directly into 2N SIP Speaker for security reasons. This way there is only communication by HTTP command between 2N SIP Speaker and relay that is controlling door lock.
Technical specifications
Dimensions and weight
Dimensions 105 x 34 x 86 mm Dimensions (with L-profiles) 130 x 34 x 86 mm Weight 300 g
Power
Power from external source 12V DC / 1,8A Power from LAN PoE IEEE 802.3af
Amplifier properties
Output of powerful amplifier Speaker impedance Amplifier performance Frequency range Harmonic distortion Signal to noise ratio 4x terminal on rear panel, STEREO/MONO with auto detection 4-8 Up to 2x10W depending on connection 20Hz 20kHz (+/- 0.5dB) 0,05% @ 1kHz 91dB
Interface
Signalling of state Local control Remote control LAN connection Earphone/line out Microphone/Line in Digital input Digital output 3x RG LED 3x Tlatko 1x Infrared detector RJ-45 10/100BASE-TX with function Auto-MDIX 3,5mm jack connector 3,5mm jack connector Galvanically isolated input 5 to 24V DC Galvanically isolated relay output 24V 1A AC/DC
Audio stream
Codecs G.711, G.729
2N TELEKOMUNIKACE a.s.
Modansk 621, 143 01 Prague 4, Czech Republic, Tel.: +420 261 301 500, E-mail: [email protected], www.2n.cz.