Dell Atxpower Pinout
Dell Atxpower Pinout
ru
Page 1 of 1
This non-standard ATX wiring is used in Dell Pentium II and Pentium III systems. wire side view:
20 pin MOLEX 39-299202 connector Color Signal Pin Pin Signal Color 20 pin MOLEX 39-012200 connector
at the motherboard
11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10
+5V GND +5V GND Power_Good +5VSB (standby) +12V -12V GND GND
Red Black Red Black Orange Purple Yellow Blue Black Black
at the cable
18 AWG is recommended for all wires except pin 11, which should be 22 AWG. For 300W configurations 16 AWG is recommended. The connector on the power supplies used in Dell Socket 478 Pentium 4 systems (and other modern Dell computers ?) is standard ATX-12v. Note: some Dell power supplies do not have the -5 (white wire), (2002 v1.2 made optional, 2004 v2.01 removed from specification)
Is this document
correct or incorrect?.
Ads by Google
Power Supply
Wiring Diagram
Connector Pin
Molex Connector
Pinouts.ru > ATX, WTX and other standard and proprietary power supply (PSU) cables connectors > Pinout of DELL ATX motherboard Power Supply and layout of 20 pin MOLEX 39-29-9202 connector and 20 pin MOLEX 39-01-2200 connector
Source(s) of this and additional information: DELL ATX design, http://pinouts.ru/Power/atxpower_pinout.shtml Contributor(s): , pmbasehore Last updated 2012-10-07 18:55:22.
This page contain parts under Copyright 2000-2012 by pinouts.ru team. No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases. Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
http://pinouts.ru/Power/dell_atxpower_pinout.shtml
10/28/2012