3116 E1 Testing
3116 E1 Testing
Technical Specifications
E1 Network Interface Framing : Framed / Unframed Signal : Framed PCM31 (CCS) frame, PCM30 (CAS) frame CRC4 enable/disable : 2048Kbps + / - 50 ppm : HDB3 : 120 Ohms, Balanced , 75 Ohms, Unbalanced , (Optional) : Recovered timing from E1 : Local or recovered timing from E1 : +/- 3V , +/- 10% for Balanced line. +/- 2.37V, +/- 10% for Unbalanced line : 0 to -43dB : As per ITU-T Rec.G.823. : ITU-T G.703, G.704, G.706,G.736, G.732 and ETSI, ETS 300420 : 12dB for 51 to 102kHz. 18dB for 102 to 2048kHz. 14dB for 2048 to 3072kHz. : RJ - 45
Nominal Bit Rate Line Code Line Impedance Receive Timing Transmit Timing Transmit Level Receiver Sensitivity Jitter Performance E1 Compliance Return Loss
Connector Diagnostics Loop Back : Remote Loop back facility to Test the incoming E1 stream Alarms : Receive Frame sync Loss alarms for all 16E1s streams. NMS Port Interface : DB 9 pin Female Data Rate : 9600 Parity : None Data bits :8 Start bits :1 Power Supply Operating Voltage : 230V AC, 50Hz/ -48V DC Environment Operating Temperature : - 5C to 50C Relative Humidity : 0-90% non-condensing. Physical Dimensions Dimensions : 1U 19
TEAM ENGINEERS
Solutions In Connectivity An ISO 9001 : 2000 Company Regd. Office & Works : # 3-18-3, 1st Floor, Pragathi Nagar Ramanthapur, Hyderabad 500 013. (A.P.), INDIA. Tele : +91-40-27030837/ 27032126 / 27036274 & 75 E-Mail : [email protected] [email protected] url : www.teamengineers.in, www.team-engineers.com