Scribd
Upload
41 views

Exp 4

The document describes an experiment to obtain the input and output characteristics of a transistor in a CE configuration. The experiment involves connecting a BC107 transistor in a circuit and taking readings for input characteristics by varying the base-emitter voltage VBE and measuring base current IB at different collector-emitter voltages VCE. Output characteristics are obtained by varying the collector-emitter voltage VCE and measuring collector current IC at different base currents IB. The readings are then plotted on graphs to determine the hybrid parameters including input impedance hie, output admittance hoe, forward current gain hfe, and reverse voltage gain hre.

Uploaded by

Uday Kiran
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
41 views

Exp 4

The document describes an experiment to obtain the input and output characteristics of a transistor in a CE configuration. The experiment involves connecting a BC107 transistor in a circuit and taking readings for input characteristics by varying the base-emitter voltage VBE and measuring base current IB at different collector-emitter voltages VCE. Output characteristics are obtained by varying the collector-emitter voltage VCE and measuring collector current IC at different base currents IB. The readings are then plotted on graphs to determine the hybrid parameters including input impedance hie, output admittance hoe, forward current gain hfe, and reverse voltage gain hre.

Uploaded by

Uday Kiran
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Exp. No.

Date :

TRANSISTOR CE CHARACTERISTICS (INPUT & OUTPUT)


AIM

: To obtain the input and output characteristics of a Transistor in CE


configuration and also determine the hybrid parameters.

APPARATUS :
S.No. Name of the Apparatus Range Quantity

1. 2. 3. 4. 5.

BC107 Power Supply Ammeter Voltmeter Resistor

0-30V 0-50 A, 0-10mA 0-10V 100K

1No. 2No. Each 1No. 2No. 1No.

CIRCUIT DIAGRAM:`

0-50A +

0-10mA A + 100k BC107

IC

IB
+

VBB
0-30V

VBE 0-10V

+ -

VCE

+ -

Vcc
0-30V

0-10V -

PROCEDURE:

1. Connect the circuit as shown in figure. 2. For output characteristics Keep IB=10 A by varying VBB. 3. Vary VCC in steps and note down IC and VCE. 4. Repeat step 3 for IB=20 A and 30 A 5. Draw the output characteristics by taking VCE on X-axis and IC on Y-axis for different values of IB. 6. For input characteristics Keep VCE=0, Vary VBB in steps and note down IB and VBE. 7. Repeat step 6 for VCE = 1V and VCE= 2V 8. Draw the input characteristics by taking VBE on X-axis and IB on Y-axis for different values of VCE.

Exp. No.: READINGS : a: Output Characteristics IB= 10A VCE (V) IC (mA) IB= 20A VCE (V) IC (mA) IB= 30A VCE (V) IC (mA)

Date :

b: Input Characteristics VCE = 0V VBE (V) IB (mA) VCE = 1V VBE (V) IB (mA) VCE = 2V VBE (V) IB (mA)

MODEL GRAPHS: Input Characteristics:

Output Characteristics: IC

IB

IB=30 A IB=20 A VCE=0 VCE=1V VCE=2V IB=10 A

VBE

VCE

hie =

VBE = I B VCE cons tan t

h fe =

I C = I B VCE cons tan t

hre =

V BE = VCE I B cons tan t

hoe =

I C = VCB I B cons tan t

RESULTS:

1. Input Impedance, hie= 2. Output admittance, hoe= 3. Forward current gain, hfe= 4. Reverse voltage gain, hre=

You might also like