Scribd
Upload
661 views

Aws PQR Form

This document provides details on welding procedure specifications for a welding process, including joint design, base metals, filler metals, electrical characteristics, technique, shielding, postweld heat treatment requirements, and procedure qualification test results. Key information includes the welding process, joint type, base metal specs, filler metal type, welding positions, techniques, preheat and interpass temps, and test results showing the weld meets strength and defect requirements.

Uploaded by

ndi101
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
661 views

Aws PQR Form

This document provides details on welding procedure specifications for a welding process, including joint design, base metals, filler metals, electrical characteristics, technique, shielding, postweld heat treatment requirements, and procedure qualification test results. Key information includes the welding process, joint type, base metal specs, filler metal type, welding positions, techniques, preheat and interpass temps, and test results showing the weld meets strength and defect requirements.

Uploaded by

ndi101
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

WELDING PROCEDURE SPECIFICATION (WPS) PREQUALIFIED QUALIFIED BY TESTING or PROCEDURE QUALIFICATION RECORDS (PQR)

Identification #______________________________ Company Name Welding Process(es) Supporting PQR No.(s) JOINT DESIGN USED Type _ Single Double Weld Backing Yes No Backing Material NONE Root Opening 0 - 1/16 Root Face Dimension 0- 1/16" Groove Angle N / A Radius (J-U) 1/4 Back Gouging Yes No Method N / A BASE METALS Material Spec. Type or Grade Thickness: Groove Diameter (Pipe) FILLER METALS AWS Specification AWS Classification Revision Date Authorized by Type Manual Machine POSITION Position of Groove Vertical Progression Up By ________ Date ____________ Semi-Automatic Automatic Fillet: Down

ELECTRICAL CHARACTERISTICS Transfer Mode (GMAW) Short-Circuiting Globular Spray Current AC DCEP DCEN Pulsed Other Tungsten Electrode (GTAW) Size N/A Type N/A

Fillet

TECHNIQUE Stringer or Weave Bead: Multi-pass or Single Pass (per side) Multiple Number of Electrodes Single Electrode Spacing Longitudinal N / A Lateral N/A SHIELDING Angle N/A Gas Composition Flow Rate Gas Cup Size Contact Tube to Work Distance Peening Interpass Cleaning: POSTWELD HEAT TREATMENT Temp. Time N/A

Flux Electrode-Flux (Class) PREHEAT Preheat Temp. Min. Interpass Temp. Min.

F F

Max

WELDING PROCEDURE Pass or Weld Layer(s) Filler Metals Process Class Dia. Type & Polarity Current Amps or Wire Feed Speed Travel Speed

Volts

Joint Details

Procedure Qualification Record (PQR) # Test Results Specimen No. Tensile Test Ultimate Tensile Load, lb. Ultimate Unit Stress, psi Character of Failure And Location

Width

Thickness

Area

Guided Bend Test Specimen No. Type of Bend Result Remarks

VISUAL INSPECTION Appearance Undercut Piping Porosity Convexity Test Date Witnessed By

Radiographic-Ultrasonic Examination RT Report No. Result UT Report No. Result FILLET WELD TEST RESULTS Minimum size multiple pass, Maximum size single pass Macroetch Macroetch 1. 2. 1. 2. 3. 3. All Weld-Metal Tension Test Tensile strength, psi Yield point/strength, psi Elongation in 2 in., % Laboratory Test No.

Other Tests

Welders name Tests conducted by

Clock No.

Stamp No. Laboratory

Test No. Per We the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded and tested in accordance with the requirements of ANSI/AWS D14.1, ( ).
Year

Signed
Manufacturer or Contractor

By Title Date

You might also like