Scribd
Upload
20 views

Spec Reading Assignment

SPECIFICATION READING ASSIGNMENT 1. PURPOSE of the assignment is improving spec reading skills. Find the answer of these questions from specs. 3. Hints and Tips Use this link for the 3GPP specs.

Uploaded by

Ender Çulha
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
20 views

Spec Reading Assignment

SPECIFICATION READING ASSIGNMENT 1. PURPOSE of the assignment is improving spec reading skills. Find the answer of these questions from specs. 3. Hints and Tips Use this link for the 3GPP specs.

Uploaded by

Ender Çulha
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

SPECIFICATION READING ASSIGNMENT

1. PURPOSE of THE ASSIGMENT


Purpose of this assignment is improving spec reading skills.

2. PREREQUISITES
2.1 Training Documents N/A 2.2 Subjects / Assignments N/A

3. ASSIGMENT BODY
3.1 The Road Map Find the answer of these questions from specs. 1- In which situations does switch send "484 adress Incomplete" message? 2- In which situations does MGW send "Bearer Modification Support" message? (3gpp 29232-860) 3- Which message encapsulates ISUP SUS message for SIP-I? (Q.1912.5) 4- Which messages are sent by MSC-A after receiving "A-Handover-Required" message in basic intra-MSC handover? 5- For which codec speech types are TFO frame formats defined? 6- Which sip message has the same meaning with 606(Not Acceptable) message? 7- For which purposes is MAP_FORWARD_ACCESS_SIGNALLING service message used in GSM/UMTS networks? 8- For Basic Architecture for UMTS to UMTS TrFO Connection, in between which nodes oOB Codec Negotiation is performed? 9- What are Five Adaptive Multi-Rate Codec Types in GSM-UMTS networks? 10- What are BSSMAP Procedures in GSM/UMTS? 11- In a MS to MS call, what can be the values of setup bearer capability speech versions? 12- In a mobile to mobile call, between which nodes is PROGRESS message sent? 13- What can be the values of BICC APM action indicator? 14- In which situations is ISUP IAM message sent? 15 - What does BSSAP header contain?

16- What is MAP_PREPARE_SUBSEQUENT_HANDOVER service used for? 17- What differences are there between overlap signaling and en-block SIP-I call flow? 18- What is CGB message used for? 19- What are the contents of CALL PROCEEDING message? 20- Which side can generate 305 (Use Proxy) message? 3.2 Hints and Tips Use this link for the 3GPP specs: http://www.3gpp.org/specification-numbering Use this link for the ITU/T Recommendations:
http://www.itu.int/ITU-T/recommendations/index.aspx?ser=Q

Useful Notices

4. ADDITIONAL EXPLANATIONS
4.1 Patches & Modules N/A 4.2 Test Cases 4.2.1 Catt Test Cases

N/A 4.2.2 GAP Test Cases

N/A 4.3 Explanations of The Terms N/A 4.4 Examples N/A

5. DEADLINE

1 day

You might also like