This is an expandable combination for engineers, education and hobbyists. There’s a convenient bundle if you don’t want to purchase individual parts.
The P2 Edge is cost-effective efficiently-designed six-layer PCB that includes the main components for most applications, simplifying integration by only requiring one of our 80-pin connectors. The P2 Edge plugs into the P2 Edge Module Breadboard, an expansive area for circuit building with three-pin headers, Propeller 2 Accessory Set and a high-current supply for servos and Parallax’s sensors. Programming requires a PropPlug. Be sure to get a 5V/3A power supply and USB to 2.1mm power cable. too.
The P2 Mini Breakout Board provides another low-cost solution to quickly connect the P2 Edge to the Propeller 2 Accessory Boards, Click Adapter, or WX Adapter.
Be sure to get a 5V/3A power supply and USB to 2.1mm power cable. too.
Our P2 Evaluation Board is the original P2 design for engineers and early adopters, having gone through several revisions since 2019.
The P2 Evaluation Board is the best choice for professional development, especially for those working with precise, high-speed signaling.
The traces are length-matched and controlled for signal measurement and generation, analog inputs, and digital signal processing.
Programming circuitry is built directly into the board and no PropPlug is required. The Propeller 2 Accessory Set plugs directly into the board’s headers.
Parallax also supports 20+ MikroE Click Boards. We’ve made a Click Adapter to connect these to the P2 Edge Module Breadboard or Propeller 2 Evaluation Board.
Clicks share a common connector and interface; over 1,000 of them exist through electronic suppliers like Mouser and Digi-Key.
They provide a quick way to interface commonly used sensors, real-time clocks, motor controllers, RS-485 circuits, and displays.
In most cases, Parallax provides Spin2 source code for the Click boards available from our shop. Check Downloads and Resources under each Click for the Spin2 code examples.
View or join the discussions in the Propeller 2 Forum
We strive to provide the best products and support for all of our customers.
