Quantic PMI (Planar Monolithics)’s Post

Featured on everything RF... The LM-1G18G-15-10W-500WP-SFF from Quantic PMI (Planar Monolithics) is a Power Limiter that operates from 1 to 18 GHz. It can handle a CW input power of up to 10 W and a peak input power of 500 W (at 0.1% duty cycle, 1 µs pulse width) with a VSWR of <2.0:1. This limiter has an insertion loss of <2.5 dB and provides a leakage of +17 dBm with a recovery time of 100 ns.  Compact housing measuring 1.0" x 1.0" x 0.4" with field replaceable SMA female connectors. https://lnkd.in/eQk4rnSp #RF #RFengineering #microwave #technology

Featured in everything RF... The EQL-DC40-20-292FF from Quantic PMI (Planar Monolithics) is a Passive Gain Equalizer that operates from DC to 40 GHz with a slope of up to 0.5 dB/GHz, an insertion loss of 20 dB, and an amplitude accuracy of ±1 dB. This equalizer can handle an input power of up to 1 W (~30 dBm) and has a VSWR of 1.6:1. It allows both forward and reverse power measurements to be equivalent. This equalizer is available in a module that measures 0.53" x 0.36" x 0.18" with removable 2.92mm (female) connectors. https://lnkd.in/g8NSGu7B #RF #RFengineering #microwave

Featured on everything RF... The PCG-12-0DBM-12V-SFF from Quantic PMI (Planar Monolithics) is a Comb Generator with an input frequency range from 1 to 2 GHz and an output frequency range from 1 to 26 GHz. It requires an input power of 0 to 5 dBm and output power of -20 dBm. This active comb generator requires a DC supply of 12 V and consumes 380 mA of current. The module measures 1.0" x 0.655" x 0.38" with SMA (F) removable connectors. https://lnkd.in/dWZ36QQd #RF #RFengineering #microwave

Featured in the Microwave Product Digest on the On-the-Market... Quantic PMI (Planar Monolithics) Model P16T-100M27G-100-T-DEC is an SP16T absorptive switch that operates from 0.1 to 27 GHz. Insertion loss is 10 dB, isolation ranges from 70 to 90 dB, VSWR is 3:1, and maximum RF input power is 20 dBm CW. It switches in 100 ns, is controlled by TTL logic, and measures 8" x 3" x 0.7" with female 2.92 mm connectors. https://lnkd.in/emManR_F #RF #RFengineering #microwave #switches #technology

Featured in Microwave Product Digest On-the-Market... Quantic PMI (Planar Monolithics) Model P4T-100M18G-80-T-515-SFF-4W-IND single pole four throw absorptive switch operates from 0.1 to 18 GHz that offers 80 dB isolation and insertion loss of 6 dB. It has a switching speed of 200 ns, handles up to 36 dBm of CW RF input power, and is housed in a radial package measuring 1.25 x 0.4 in. https://lnkd.in/e3U_NFf8 #rf #rfengineering #microwave

Featured on everything RF... The LM-1G18G-2W-SFF-BIAS from Quantic PMI (Planar Monolithics) is an RF Limiter that operates from 1 to 18 GHz that can handle a CW input power of 2 W and a peak input power of up to 1000 W (~60 dBm, 0.1% duty cycle). This limiter has an insertion loss of less than 2 dB and a flat leakage of 26.75 dBm. Requires a DC supply from 0 to -10 V and consumes <1 mA of current. This RF limiter is available in a connectorized module that measures 0.53" x 0.69" with internally DC-blocked SMA connectors and can be surface-mounted or connectorized. https://lnkd.in/eQ-5YMuA #RF #RFengineering #microwave

Featured in the April edition of Microwave Journal... Quantic PMI (Planar Monolithics) Model No. PE2-30-20G20R6G-3R0-10-12-SFF is a 20.0 to 26.5 GHz, Low Noise Amplifier. This amplifier offers a gain of +30 dB typical with a gain Flatness of ±1.5 dB maximum; a noise figure of 2.5 dB typical – 3 dB maximum; a OP1dB +10 dBm Min, measured @ +10.7 dBm; and VSWR of 2.0:1. Supplied in our standard PE2 housing that can be used as a SMA connectorized or a surface mount component. https://lnkd.in/ep22pkdH #rf #rfengineering #microwave

Featured on everything RF... The P4T-100M18G-80-T-515-SFF-4W-IND from Quantic PMI (Planar Monolithics) is an Absorptive SP4T Switch that operates from 0.1 to 18 GHz. It has a switching speed of <200 ns and provides an isolation of 80 dB. This switch can handle an input power of up to 36 dBm and has an insertion loss of 4.5 dB. It is available in a radial module that measures 1.25" (Dia.) x 0.4" with SMA (F) removable connectors and requires a DC supply of +5 and -15 V. https://lnkd.in/eCXcXbvG #rf #rfengineering #microwave

Featured on everything RF... The LM-1G18G-2W-SFF-BIAS from Quantic PMI (Planar Monolithics) is an RF Limiter that operates from 1 to 18 GHz that can handle a CW input power of 2 W and a peak input power of up to 1000 W (~60 dBm, 0.1% duty cycle). This limiter has an insertion loss of less than 2 dB and a flat leakage of 26.75 dBm. Requires a DC supply from 0 to -10 V and consumes <1 mA of current. This RF limiter is available in a connectorized module that measures 0.53" x 0.69" with internally DC-blocked SMA connectors and can be surface-mounted or connectorized. https://lnkd.in/eQ-5YMuA #RF #RFengineering #microwave

Featured in everything RF... The PE2-16-300M20G-1R7-15-12-SFF from Quantic PMI (Planar Monolithics) is a Low Noise Amplifier that operates from 0.3 to 20 GHz. It provides a gain of up to 16 dB, P1dB of >12 dBm and has a noise figure of under 3.8 dB. This amplifier requires a supply voltage of 12 to 15 V DC and draws 100 mA of current. It is available in a standard PE2 housing that measures 1.08" x 0.71" x 0.29" with SMA female connectors. https://lnkd.in/eWtcAZ_s #RF #RFengineering #microwave