Safety: Where to Start if You Haven’t Already (Part 3)
WorkSafe Texas provides outsourced safety support for small businesses, but if you are not ready to start with us, get started anyway. In this third post, we continue our list of high-impact, low-resource actions that can help you create a safer and more efficient workplace.
Here is a brief recap of the previous posts:
1 Make it ok to call a time out.
2 Walk your worksite, talk to people, and create a prioritized list of the greatest risks.
3 Fill in equipment gaps so people can work safely.
4 Write and discuss new safety policies a few at a time. Better to do 5 things that stick, than 50 things that get no traction.
There is more detail in the previous posts, but on to step 5!
5. Train people to do the work and use equipment properly.
Action: Explain the What, How and Why about each policy or procedure:
What is the topic (e.g. ladder Safety)
How explains the do’s, don’ts, and the way work should get done. (E.g. do use three points of contact, don’t use the top 2 steps on A-frame ladders).
Why - Explain the reasoning behind the policy (e.g. falls are the leading cause of death, you need the top two steps to maintain stability).
Pro Tip 1: Before you set policies in stone, talk with people about the What, How and Why. Only wet babies like change, so expect some resistance. If they have better ideas that are just as safe and efficient, adopt them. If they don’t, explaining the rationale and giving people a chance to give input will reduce the resistance.
Pro Tip: You may need to apologize for the times you’ve said “just get it done.” You cannot undo the past, but tomorrow is a new day.
Pro Tip: While you may not feel the need to explain the Why’s, failing to do so usually backfires. One client replaced the 6 lb. sledgehammers used to tighten high-pressure pipes with a 4 lb. version because workers were straining their arms and over-torquing the pipes. They never explained why, so people assumed it was a cost cutting move. Employees purchased their own 6 lb hammers or pounded twice as hard. Mission not accomplished!
6. Inspect what you expect
Action: Go to work sites to verify that tools and procedures are being used as expected. Praise what you see going right, and correct anything that is not up to par.
Why: Make it clear that this is not the latest leadership fad or a phase you are going through. You have provided tools, set clear expectations, and now you are following through.
· Pro Tip: Remember that leaders talk about budgets, schedules, costs, etc., 40-60 times more than they talk about safety, so people have gotten the message about what is really important to you. It will take daily, determined effort to get the safe and efficient message to stick.
Culture change comes slowly, but if you have come this far, you have already made significant strides. More to come after the holidays! May you have a merry and blessed Christmas!
1