BroadWave offers fixed attenuators from 0.5 to 1000-Watts average power in a wide variety of RF connectors including between series connector configurations. Convection and conduction cooled units are in stock or inquire about an application specific solution. #IEEE #Microwave #RF https://lnkd.in/g9MFGrYi
Broadwave Technologies
Appliances, Electrical, and Electronics Manufacturing
Greenwood, IN 196 followers
We are a woman owned business manufacturing in the USA. Our specialty is cost effective application specific solutions.
About us
BroadWave Technologies is a leading manufacturer of test accessories, terminations, fixed attenuators and power dividers for the Aerospace, Automotive, Defense, Medical, Telecommunications, Test and Measurement markets. In addition to standard products BroadWave specializes in low cost custom components. All products are 100% tested. • Impedance Matching Pads: Also called minimum loss pads. These devices are used to transform between different impedances. • DC Blocks: Pass RF up to 23 GHz and breakdown voltages up to 500 Volts. Standard 50 and 75 Ohm (other impedances available) devices exhibit low insertion loss. Inner, outer and inner/outer designs are available. • Feedthru Terminations: Designed to match RF components with high impedance test equipment such as an oscilloscope. Custom impedances are also available. • RF Detectors: Available in positive and negative DC polarity from 100 kHz to 3 GHz. 50 and 75 Ohm units are standard. • Conduction Cooled Terminations: Up to 250 Watts average power mounted to a customer provided heat sink. These devices are lower in cost and much smaller than convection cooled terminations. • Convection Cooled Terminations: Up to 1,000 Watts average power with a traditional air cooled design. • Fixed Attenuators: Precision and low cost models are available. DC passing and reverse polarity available for select models. Standard attenuation values are 1-40 dB. 50 and 75 Ohm are standard. • Power Dividers: Resistive and reactive 50 and 75 Ohm units up to 6 GHz in 2-16 way configurations. • RF Adapters: Same series and between series 50 Ohm adapters. DC-50 GHz depending on connector rating. • Manual Variable Attenuators: Rotary attenuation selection up to 110 dB. 50 Ohm, DC-3 GHz. • Programmable Attenuators: Electro-mechanical and solid state designs up to 2.5 GHz. Voltage controlled and TTL controlled 50 and 75 Ohm units are standard with attenuation up to 127 dB. Single step devices are also available.
- Website
-
http://www.broadwavetechnologies.com
External link for Broadwave Technologies
- Industry
- Appliances, Electrical, and Electronics Manufacturing
- Company size
- 11-50 employees
- Headquarters
- Greenwood, IN
- Type
- Privately Held
- Founded
- 2000
- Specialties
- Impedance Matching Pads, Conduction and Convection Cooled Fixed Attenuators, DC Blocks, Power Dividers, Feedthru Terminations, RF Adapters, RF Detectors, Manual & Programmable Attenuators, Conduction & Convection Cooled Terminations, and RF Passive Components
Locations
-
Primary
Get directions
170 Airport Parkway
Suite A
Greenwood, IN 46143, US
Employees at Broadwave Technologies
Updates
-
This 50 Ohm UHF band power divider exhibits 25 dB typical isolation. BroadWave manufactures 50 and 75 Ohm power dividers with BNC, F, N, TNC, and SMA RF connectors. Mixed connector configurations are also available. #IEEE #Microwave #RF https://lnkd.in/gfZFPpFQ
-
BroadWave DC blocks are available in a wide range of frequency ranges, connector types as well as 50 or 75 Ω standard impedances. Below is a summary of our current DC Block capabilities: ● 50 Ω and 75 Ω DC Blocks are standard (other impedances are available) ● Low insertion loss ● Inner, outer, and inner/outer DC Blocks are available ● Virtually any RF connector combination (BNC, SMA, N, TNC, F, reverse polarity, and others) ● Custom designs are also available. Please consult the factory. #IEEE #Microwave #RF https://lnkd.in/gRyVGAh9
-
BroadWave’s conduction cooled terminations are used in commercial and defense applications. #IEEEE #Microwave #RF https://lnkd.in/g-_Z49ck
-
BroadWave 75 Ohm fixed attenuators lower signal amplitude without introducing much noise or distortion. #IEEE #Microwave #RF https://lnkd.in/gb4sec7h
-
BroadWave offers directional couplers from 500 MHz to 18 GHz with N or SMA connectors. #IEEE, #Microwave, #RF https://lnkd.in/gJRbf_dV
-
These passive devices are essential to divide signals, are available in a wide range of output configurations, and are an indispensable RF component of mission critical communications. #IEEE #Microwave #RF https://lnkd.in/gGAjjq53
-
BroadWave Technologies feed thru terminations are designed to match RF components with high impedance equipment such as amplifier inputs, meter inputs, and oscilloscope inputs. #IEEE #Microwave #RF https://lnkd.in/g2APDXjN
-
High Impedance Terminations We added three high impedance terminations to our product line. These loads are useful in simulating emergency operating conditions of solar panel and electric vehicle charging installations. #IEEE #Microwace #RF https://lnkd.in/gFkCPVgs
-
This between series RF adapter resolves mixed connector interconnect transitions with minimal insertion loss. #IEEE #Microwave #RF https://lnkd.in/gWXXfiyn