Introduction To Subnetting
Last Updated :
07 Feb, 2025
Subnetting is the process of dividing a large network into smaller networks called "subnets." Subnets provide each group of devices with their own space to communicate, which ultimately helps the network to work easily. This also boosts security and makes it easier to manage the network, as each subnet can be monitored and controlled separately. In this article, we will discuss Subnetting in detail.
Introduction to Subnet
A subnet is like a smaller group within a large network. It is a way to split a large network into smaller networks so that devices present in one network can transmit data more easily. For example, in a company, different departments can each have their own subnet, keeping their data traffic separate from others. Subnet makes the network faster and easier to manage and also improves the security of the network.
Why Subnetting is Important?
Let's consider a company that follows classful addressing, it has a Class C network (192.168.1.0/24) with 256 IP addresses. It has three departments:
- Sales: 20 devices
- HR: 10 devices
- IT: 50 devices
Without subnetting, all departments share the same network, and all 256 IP addresses are available to everyone, which leads to:
- IP Waste: Only 80 devices are needed (20 + 10 + 50), but all 256 addresses are allocated, wasting 176 addresses.
- Performance Issues: Since all departments are on the same network, any data sent between devices floods the entire network, slowing communication for everyone. For example, heavy data transfer in IT can impact Sales and HR.
- Security Risks: Without subnets, anyone in Sales can access HR or IT devices, exposing sensitive data like payroll systems.
With Subnetting, we split the network into three subnets, allocating just enough IP addresses for each department:
- Sales: 192.168.1.0/27 → 32 IPs (for 20 devices, 12 spare)
- HR: 192.168.1.32/28 → 16 IPs (for 10 devices, 6 spare)
- IT: 192.168.1.48/26 → 64 IPs (for 50 devices, 14 spare)
By subnetting, we:
- Save IP addresses (Efficiency): Only 112 addresses are used (80 + some spare), leaving 144 unused for future growth.
- Keep networks faster (Better Performance): Data within each department stays in its subnet. For example, HR traffic stays in HR, reducing network congestion for Sales and IT.
- Protect sensitive data (Improved Security): Each department is isolated. If someone in Sales tries to access HR systems, subnet restrictions block them.
Key Concepts in Subnetting
IP Addressing
An IP address is made up of different parts, each serving a specific purpose in identifying a device on a network. An IPv4 address consists of four parts called "octets," separated by dots (e.g., 192.168.1.1). It has two main sections:
- Network Portion: Identifies the network the device belongs to.
- Host Portion: Uniquely identifies a device within the network.
IPv4 addresses are divided into classes based on the length of the network and host portions:
- Class A: 8-bit network ID, 24-bit host ID.
- Class B: 16-bit network ID, 16-bit host ID.
- Class C: 24-bit network ID, 8-bit host ID.
For more details, refer to Classful IP Addressing.
What is a Subnet Mask?
A subnet mask is a 32-bit number used in IP addressing to separate the network portion of an IP address from the host portion. It helps computers and devices determine which part of an IP address refers to the network they are present, and which part refers to their specific location or address within that network.
CIDR Notation: A Simplified Approach to Subnetting
Instead of using a long subnet mask (e.g., 255.255.255.0), CIDR uses a simple format like /24. The number after the slash (/n) represents the number of bits used for the network portion of the IP address.
How Subnetting Works?
The working of subnets starts in such a way that firstly it divides the subnets into smaller subnets. For communicating between subnets, routers are used. Each subnet allows its linked devices to communicate with each other. Subnetting for a network should be done in such a way that it does not affect the network bits.
In class C the first 3 octets are network bits so it remains as it is.
- For Subnet-1: The first bit which is chosen from the host id part is zero and the range will be from (193.1.2.00000000 till you get all 1's in the host ID part i.e, 193.1.2.01111111) except for the first bit which is chosen zero for subnet id part.
Thus, the range of subnet 1 is: 193.1.2.0 to 193.1.2.127
Subnet id of Subnet-1 is : 193.1.2.0
The direct Broadcast id of Subnet-1 is: 193.1.2.127
The total number of hosts possible is: 126 (Out of 128, 2 id's are used for Subnet id & Direct Broadcast id)
The subnet mask of Subnet- 1 is: 255.255.255.128
- For Subnet-2: The first bit chosen from the host id part is one and the range will be from (193.1.2.100000000 till you get all 1's in the host ID part i.e, 193.1.2.11111111).
Thus, the range of subnet-2 is: 193.1.2.128 to 193.1.2.255
Subnet id of Subnet-2 is : 193.1.2.128
The direct Broadcast id of Subnet-2 is: 193.1.2.255
The total number of hosts possible is: 126 (Out of 128, 2 id's are used for Subnet id & Direct Broadcast id)
The subnet mask of Subnet- 2 is: 255.255.255.128
The best way to find out the subnet mask of a subnet is to set the fixed bit of host-id to 1 and the rest to 0.
Finally, after using the subnetting the total number of usable hosts is reduced from 254 to 252.
Note:
- To divide a network into four (2 2 ) parts you need to choose two bits from the host id part for each subnet i.e, (00, 01, 10, 11).
- To divide a network into eight (2 3 ) parts you need to choose three bits from the host id part for each subnet i.e, (000, 001, 010, 011, 100, 101, 110, 111) and so on.
- We can say that if the total number of subnets in a network increases the total number of usable hosts decreases.
The network can be divided into two parts: To divide a network into two parts, you need to choose one bit for each Subnet from the host ID part.
In the above diagram, there are two Subnets.
Note: It is a class C IP so, there are 24 bits in the network id part and 8 bits in the host id part.
Example 1: An organization is assigned a class C network address of 201.35.2.0. It uses a netmask of 255.255.255.192 to divide this into sub-networks. Which of the following is/are valid host IP addresses?
- 201.35.2.129
- 201.35.2.191
- 201.35.2.255
- Both (A) and (C)
Solution:
Converting the last octet of the netmask into the binary form: 255.255.255.11000000
Converting the last octet of option 1 into the binary form: 201.35.2.10000001
Converting the last octet of option 2 into the binary form: 201.35.2.10111111
Converting the last octet of option 3 into the binary form: 201.35.2.11111111
From the above, we see that Options 2 and 3 are not valid host IP addresses (as they are broadcast addresses of a subnetwork), and OPTION 1 is not a broadcast address and it can be assigned to a host IP.
Example 2: An organization has a class C network address of 201.32.64.0. It uses a subnet mask of 255.255.255.248. Which of the following is NOT a valid broadcast address for any subnetworks?
- 201.32.64.135
- 201.32.64.240
- 201.32.64.207
- 201.32.64.231
Solution:
Converting the last octet of the netmask into the binary form: 255.255.255.11111000
Converting the last octet of option 1 into the binary form: 201.32.64.10000111
Converting the last octet of option 2 into the binary form: 201.32.64.11110000
Converting the last octet of option 3 into the binary form: 201.32.64.11001111
Converting the last octet of option 4 into the binary form: 201.32.64.11100111
From the above, we can see that in OPTION 1, 3, and 4, all the host bits are 1 and give the valid broadcast address of subnetworks.
and OPTION 2, the last three bits of the Host address are not 1 therefore it's not a valid broadcast address.
Advantages of Subnetting
- It provides security to one network from another network. For example: In an Organization, the code of the Developer department must not be accessed by another department.
- It may be possible that a particular subnet might need higher network priority than others. For example, a Sales department needs to host webcasts or video conferences.
- In the case of Small networks, maintenance is easy.
Disadvantages of Subnetting
- In the case of a single network, only three steps are required to reach a Process i.e Source Host to Destination Network, Destination Network to Destination Host, and then Destination Host to Process.
- In the case of a Single Network only two IP addresses are wasted to represent Network Id and Broadcast address but in the case of Subnetting two IP addresses are wasted for each Subnet.
- The cost of the overall Network also increases. Subnetting requires internal routers, Switches, Hubs, Bridges, etc. which are very costly.
To learn all the basic to advanced subnetting concepts, refer to Subnet Mask Cheat Sheet.
Similar Reads
Computer Network Tutorial
A Computer Network is a system where two or more devices are linked together to share data, resources and information. These networks can range from simple setups, like connecting two devices in your home, to massive global systems, like the Internet. Below are the main components of a computer netw
7 min read
Basics of Computer Network
Basics of Computer Networking
A computer network is a collection of interconnected devices that share resources and information. These devices can include computers, servers, printers, and other hardware. Networks allow for the efficient exchange of data, enabling various applications such as email, file sharing, and internet br
14 min read
Introduction to basic Networking Terminology
For a specific purpose if things are connected together, are referred to as a NETWORK. A network can be of many types, like a telephone network, television network, computer network, or even a people network. Similarly, a COMPUTER NETWORK is also a kind of setup, where it connects two or more device
4 min read
Goals of Networks
Computer Network means an interconnection of autonomous (standalone) computers for information exchange. The connecting media could be a copper wire, optical fiber, microwave, or satellite. Networking Elements - The computer network includes the following networking elements: At least two computers
4 min read
Basic Characteristics of Computer Networks
Computer networks allow multiple devices to connect and share resources like files, printers, and internet access. Key characteristics include the network's size (like local or wide area), the way data is transferred (wired or wireless), and the network's layout (such as star or mesh). These feature
5 min read
Challenges of Computer Network
In the age of Internet where everyone loves to work with their computers and smart phones it is impossible to think any work without networking. With advancement of technology use of computer networking is increasing rapidly. In general if we will see, we can feel also how important networking is th
4 min read
Physical Components of Computer Network
The physical components of a computer network include hardware devices and media that enable connectivity and data exchange between devices. The server, client, peer, transmission media, and connecting devices make up the hardware components. A computer network is made up of several computers connec
6 min read
Network Hardware and Software
Types of Computer Networks
A computer network is a system that connects many independent computers to share information (data) and resources. The integration of computers and other different devices allows users to communicate more easily. It is a collection of two or more computer systems that are linked together. A network
11 min read
LAN Full Form - Local area network
A Local area network (LAN) is a network that is used to link devices in a single office, building, or campus of up to a short distance. LAN is restricted in size. In LAN networks internet speed is from 10 Mbps to 100 Mbps (But now much higher speeds can be achieved). The most common topologies used
10 min read
How to Set Up a LAN Network?
LAN (Local Area Network) is a data communication network that locally connects network devices such as workstations, servers, routers, etc. to share the resources within a small area such as a building or campus. Physical or wireless connections are set up between workstations to share the resources
4 min read
MAN Full Form in Computer Networking
A Metropolitan Area Network (MAN) is a type of computer network that spans over a metropolitan area, typically a city. It provides high-speed data communication services such as video, audio, and data transfer between multiple LANs (Local Area Networks) and WANs (Wide Area Networks). The main purpos
9 min read
MAN Full Form
MAN stands for Metropolitan Area Network and it is made by connecting multiple LANs. MAN covers a geographical area which is known as the metropolitan area. It serves as a connection that is larger than LAN(Local Area Network) but smaller than WAN(Wide Area Network). It generally covers the area of
5 min read
WAN Full Form
A WAN (Wide Area Network) is to connect multiple smaller Local Area Networks (LANs). It is a computer network designed. WANs can help in communication, the sharing of information, and much more between systems or devices from around the world through a WAN provider. What is a WAN?WAN stands for Wide
5 min read
Introduction of Internetworking
Internetworking is composed of 2 words, inter and networking, which implies an association between totally different nodes or segments. This connection area unit is established through intercessor devices, such as routers or gateways. The first term for associate degree internetwork was Catenet. Thi
8 min read
Difference between Internet, Intranet and Extranet
Networks are crucial in today’s globalized world because they allow the acquisition, exchange, and organization of knowledge. Of all the first order networks the Internet, Intranet, and Extranet are commonly utilized for various applications. Every network type meets specific roles that are required
5 min read
Protocol Hierarchies in Computer Network
A Protocol Hierarchy is a fixed set of rules and conventions that govern the communication between two or more computers. The hierarchical structure allows for modular design, interoperability, and ease of implementation in computer networks. What is Protocol?A protocol is simply defined as a set of
3 min read
Network Devices (Hub, Repeater, Bridge, Switch, Router, Gateways and Brouter)
Network devices are physical devices that allow hardware on a computer network to communicate and interact with each other. Network devices like hubs, repeaters, bridges, switches, routers, gateways, and brouter help manage and direct data flow in a network. They ensure efficient communication betwe
9 min read
Introduction of a Router
Network devices are physical devices that allow hardware on a computer network to communicate and interact with one another. For example Repeater, Hub, Bridge, Switch, Routers, Gateway, Router, and NIC, etc. What is a Router?A Router is a networking device that forwards data packets between computer
12 min read
Introduction of Gateways
A gateway is a network connectivity device that connects two different configuration networks. Gateways are also known as protocol converters, because they play an important role in converting protocols supported by traffic on different networks. As a result, it allows smooth communication between t
5 min read
What is a Network Switch and How Does it Work?
The Switch is a network device that is used to segment the networks into different subnetworks called subnets or LAN segments. It is responsible for filtering and forwarding the packets between LAN segments based on MAC address. Switches have many ports, and when data arrives at any port, the destin
9 min read
OSI Model
What is OSI Model? - Layers of OSI Model
The OSI (Open Systems Interconnection) Model is a set of rules that explains how different computer systems communicate over a network. OSI Model was developed by the International Organization for Standardization (ISO). The OSI Model consists of 7 layers and each layer has specific functions and re
13 min read
Physical Layer in OSI Model
The physical Layer is the bottom-most layer in the Open System Interconnection (OSI) Model which is a physical and electrical representation of the system. It consists of various network components such as power plugs, connectors, receivers, cable types, etc. The physical layer sends data bits from
4 min read
Data Link Layer in OSI Model
The data link layer is the second layer from the bottom in the OSI (Open System Interconnection) network architecture model. It is responsible for the node-to-node delivery of data within the same local network. Its major role is to ensure error-free transmission of information. DLL is also responsi
5 min read
Session Layer in OSI model
The Session Layer is the 5th layer in the Open System Interconnection (OSI) model which plays an important role in controlling the dialogues (connections) between computers. This layer is responsible for setting up, coordinating, and terminating conversations, exchanges, and dialogues between the ap
6 min read
Presentation Layer in OSI model
Presentation Layer is the 6th layer in the Open System Interconnection (OSI) model. This layer is also known as Translation layer, as this layer serves as a data translator for the network. The data which this layer receives from the Application Layer is extracted and manipulated here as per the req
4 min read
Application Layer in OSI Model
The Application Layer of OSI (Open System Interconnection) model, is the top layer in this model and takes care of network communication. The application layer provides the functionality to send and receive data from users. It acts as the interface between the user and the application. The applicati
5 min read
TCP/IP Model
TCP/IP Model
The TCP/IP model (Transmission Control Protocol/Internet Protocol) is a four-layer networking framework that enables reliable communication between devices over interconnected networks. It provides a standardized set of protocols for transmitting data across interconnected networks, ensuring efficie
7 min read
TCP/IP Ports and Its Applications
A port is like a logical address for different types of internet communication. Each type of service (like websites or email) has its port where data is sent and received. You can think of it as a mailbox where messages are delivered. When data comes in, it goes to the right port (mailbox), and the
7 min read
What is TCP (Transmission Control Protocol)?
Transmission Control Protocol (TCP) is a connection-oriented protocol for communications that helps in the exchange of messages between different devices over a network. It is one of the main protocols of the TCP/IP suite. In OSI model, it operates at the transport layer(Layer 4). It lies between th
5 min read
TCP 3-Way Handshake Process
The TCP 3-Way Handshake is a fundamental process that establishes a reliable connection between two devices over a TCP/IP network. It involves three steps: SYN (Synchronize), SYN-ACK (Synchronize-Acknowledge), and ACK (Acknowledge). During the handshake, the client and server exchange initial sequen
6 min read
Services and Segment structure in TCP
The Transmission Control Protocol is the most common transport layer protocol. It works together with IP and provides a reliable transport service between processes using the network layer service provided by the IP protocol. The various services provided by the TCP to the application layer are as f
5 min read
TCP Connection Establishment
TCP (Transmission Control Protocol) is a core internet protocol that ensures reliable, ordered, and error-checked delivery of data between computers. It establishes a connection using a three-way handshake before data transfer begins, allowing both devices to synchronize and agree on communication p
4 min read
TCP Connection Termination
In TCP 3-way Handshake Process we studied that how connections are established between client and server in Transmission Control Protocol (TCP) using SYN bit segments. In this article, we will study how TCP close connection between Client and Server. Here we will also need to send bit segments to a
5 min read
TCP Timers
TCP uses several timers to ensure that excessive delays are not encountered during communications. Several of these timers are elegant, handling problems that are not immediately obvious at first analysis. Each of the timers used by TCP is examined in the following sections, which reveal its role in
3 min read
Fast Recovery Technique For Loss Recovery in TCP
When the RTO timer expires but an ACK is not received, the sender confirms that the packet is lost due to congestion at intermediary devices. Now sender has to tackle this congestion state carefully. Fast Recovery is the packet loss recovery technique. Recovery means becoming inactive and not transm
4 min read
Difference Between OSI Model and TCP/IP Model
Data communication is a process or act in which we can send or receive data. Understanding the fundamental structures of networking is crucial for anyone working with computer systems and communication. For data communication two models are available, the OSI (Open Systems Interconnection) Model, an
5 min read
Medium Access Control
MAC Full Form - Media Access Control
MAC refers to Media Access Control, which is an important issue in network technology. In simple words, MAC is a series of rules through which devices can transfer data among them in a network. When a device is connected to a network, it obtains a unique MAC address. It identifies a device connected
5 min read
Channel Allocation Problem in Computer Network
The Channel Allocation Problem arises in communication networks when multiple devices need to share a limited number of communication channels. The goal is to efficiently allocate channels to devices while avoiding interference, reducing congestion, and optimizing network performance. Channel alloca
4 min read
Multiple Access Protocols in Computer Network
Multiple Access Protocols are methods used in computer networks to control how data is transmitted when multiple devices are trying to communicate over the same network. These protocols ensure that data packets are sent and received efficiently, without collisions or interference. They help manage t
9 min read
Carrier Sense Multiple Access (CSMA)
Carrier Sense Multiple Access (CSMA) is a method used in computer networks to manage how devices share a communication channel to transfer the data between two devices. In this protocol, each device first sense the channel before sending the data. If the channel is busy, the device waits until it is
9 min read
Collision Detection in CSMA/CD
CSMA/CD (Carrier Sense Multiple Access/ Collision Detection) is a media access control method that was widely used in Early Ethernet technology/LANs when there used to be shared Bus Topology and each node ( Computers) was connected by Coaxial Cables. Nowadays Ethernet is Full Duplex and Topology is
7 min read
Controlled Access Protocols in Computer Network
Controlled Access Protocols (CAPs) in computer networks control how data packets are sent over a common communication medium. These protocols ensure that data is transmitted efficiently, without collisions, and with little interference from other data transmissions. In this article, we will discuss
6 min read
IP Addressing
What is IPv4?
IP stands for Internet Protocol version v4 stands for Version Four (IPv4), is the most widely used system for identifying devices on a network. It uses a set of four numbers, separated by periods (like 192.168.0.1), to give each device a unique address. This address helps data find its way from one
5 min read
What is IPv6?
The most common version of the Internet Protocol currently is IPv6. The well-known IPv6 protocol is being used and deployed more often, especially in mobile phone markets. IP address determines who and where you are in the network of billions of digital devices that are connected to the Internet. It
5 min read
Introduction of Classful IP Addressing
An IP address is an address that has information about how to reach a specific host, especially outside the LAN. An IP address is a 32-bit unique address having an address space of 232.Classful IP addressing is a way of organizing and managing IP addresses, which are used to identify devices on a ne
11 min read
Classless Addressing in IP Addressing
The Network address identifies a network on the internet. Using this, we can find a range of addresses in the network and total possible number of hosts in the network. Mask is a 32-bit binary number that gives the network address in the address block when AND operation is bitwise applied on the mas
7 min read
Classful vs Classless Addressing
Classful and Classless addressing are methods used in networking to manage IP addresses. Classful addressing divides IP addresses into fixed classes (A, B, C, D, E), each with predefined ranges. In contrast, classless addressing, also known as CIDR (Classless Inter-Domain Routing), offers more flexi
6 min read
Classless Inter Domain Routing (CIDR)
Classless Inter-Domain Routing (CIDR) is a method of IP address allocation and IP routing that allows for more efficient use of IP addresses. CIDR is based on the idea that IP addresses can be allocated and routed based on their network prefix rather than their class, which was the traditional way o
6 min read
Supernetting in Network Layer
Supernetting is the opposite of Subnetting. In subnetting, a single big network is divided into multiple smaller subnetworks. In Supernetting, multiple networks are combined into a bigger network termed a Supernetwork or Supernet. In this article, we'll explore the purpose and advantages of supernet
4 min read
Introduction To Subnetting
Subnetting is the process of dividing a large network into smaller networks called "subnets." Subnets provide each group of devices with their own space to communicate, which ultimately helps the network to work easily. This also boosts security and makes it easier to manage the network, as each sub
8 min read
Difference between Subnetting and Supernetting
Subnetting is the procedure to divide the network into sub-networks or small networks, these smaller networks are known as subnets. The subnet is also defined as an internal address made up of a combination of a small network and host segments. In a subnet, a few bits from the host portion are used
4 min read