How to Delete a File or Folder Using CMD

How to make a USB Unbootable using cmd?

Last Updated : 29 Oct, 2022

A bootable USB is a disk that is used to boot up a system for the installation of an Operating system like Linux, macOS, windows, etc. A USB can be made bootable using a command line only for the systems that have windows installed (7/8/10 or higher). A normal USB drive is used for purpose of copying data from one computer to transfer data to another computer, while a bootable Pendrive is used for performing upgrades and updates on a computer. After a USB is turned into a bootable drive it also acts like a normal USB storage device that has an ISO image of an Operating system saved on it, if using a USB drive as a storage medium is your priority so you should always consider turning the bootable drive to a normal drive.

Steps to Make USB Unbootable using CMD

Step 1: Open the command prompt by pressing windows + R (and type cmd) or you can go to the Start Menu and type cmd. make sure you run the command prompt as Administrator.

Running-command-as-administrator

Step 2: Type diskpart and press enter, The diskpart commands interpreter helps you manage your computer's drives (disks, partitions, volumes, or virtual hard disks).

Typing-diskpart

Step 3: Type List disk and press enter. This command will list all the active disks in your system.

Typing-list-disk

Step 4: Type select disk n (where n is the number of your disk) and press enter. Usually, the USB drives are disk 1, but make sure you check before selecting any disk.

Selecting-disk-1

Step 5: Type clean and press enter. It is very necessary to clean the disk so that the disk images or iso files could be deleted.

Typing-clean

Step 6: Type create partition primary and press enter.

Typing-create-partition-primary

Step 7: Type Active and press enter.

Typing-active

Step 8: Type format fs= fat32 quick (this is the file system that the disk will be using) and press enter (wait for a while process gets completed). the most famous partition is NTFS and windows also uses this file system but sometimes drives do not support this so use fat32.

Typing-formatfs

Step 9: Type Assign and press enter.

Typing-assign

Now you can exit the command prompt by typing exit, your bootable USB drive is now unbootable and ready to use. You can use it as a normal storage device for transferring data from one to another computer.

How to Delete a File or Folder Using CMD

lucifer2411

Improve

Article Tags :

TechTips

Similar Reads

How to Remove Virus Using CMD?

Viruses and malware can wreak havoc on your computer, causing slow performance, data loss, and security breaches. While there are numerous antivirus programs available, using Command Prompt offers a powerful and direct method to remove viruses without the need for additional software. CMD is a built

How to Shut Down a Computer using Command Prompt?

Shutting down your computer via the Command Prompt is a useful method that can help you perform a clean shutdown without having to use the standard Windows interface. Below are the steps to guide you through the process, along with some variations for advanced shutdown options.Table of Content1. Bas

How to Run Windows From a USB Drive?

Looking to run Windows from a USB drive? Whether you're using it for troubleshooting, testing, or as a portable version of your operating system, booting Windows from a USB drive can be extremely useful. With the right tools and setup, you can create a bootable Windows USB drive that lets you carry

How to Repair Windows 10 Using Command Prompt - 5 Methods

Is your Windows 10 not working right? Maybe itâ€™s slow, keeps crashing, or wonâ€™t start properly. These problems can be annoying, but you donâ€™t have to do something big like reinstalling Windows yet. Thereâ€™s a handy tool called Command Prompt that can fix many Windows issues, and itâ€™s already on your

How to Delete a File or Folder Using CMD?

When working with files on Windows, File Explorer usually makes creating and deleting files simple. But what if File Explorer freezes or stops responding? In such cases, the Command Prompt (CMD) offers a reliable alternative. CMD allows you to create and delete files or folders using simple commands

How to Turn off Safe Mode on Your Android Phone or Tablet?

On Android smartphones, Safe Mode is a helpful debugging tool, but occasionally you may find yourself locked in it. Don't worry if you're wondering how to exit Safe Mode on your Android deviceâ€”returning to regular mode is simple. This article will walk you through the process of taking your Android

How to Hide files using Command-line Interface?

If you're looking to hide files using the command line, it's a quick and efficient way to protect sensitive data on your system. Whether on Windows, macOS, or Linux, you can use the command line to hide files or folders with just a few simple commands. This guide will help you understand how to hide

How to Format a Hard Drive Using the Command Prompt

Formatting a hard drive is a common step when setting up a new disk or repurposing an old one. Although there are various methods to format in Windows, using the Command Prompt offers a fast and efficient option, particularly for advanced users.This article will show you how to format a hard drive u

How to Install Windows 10 From a USB Flash Drive?

Installing Windows 10 from a USB flash drive is one of the most efficient ways to set up or upgrade your operating system. Whether youâ€™re installing Windows 10 on a new PC or performing a clean installation on your existing device, using a bootable USB drive simplifies the process. This method allow

How to Remove RAR/WinRAR Password Using CMD?

Forgetting the password to your RAR or WinRAR file can be incredibly frustrating, especially when you need to access important data quickly. Fortunately, Command Prompt in Windows provides a powerful and effective way to remove the password from your RAR/WinRAR files without the need for third-party