Everand Logo

Welcome to Everand!

  • Discover millions of audiobooks, ebooks, and so much more with a free trial

    From $11.99/month after trial. Cancel anytime.

    Arduino Projects with Tinkercad | Part 2: Design & program advanced Arduino-based electronics projects with Tinkercad
    Arduino Projects with Tinkercad | Part 2: Design & program advanced Arduino-based electronics projects with Tinkercad
    Arduino Projects with Tinkercad | Part 2: Design & program advanced Arduino-based electronics projects with Tinkercad
    Ebook138 pages49 minutes

    Arduino Projects with Tinkercad | Part 2: Design & program advanced Arduino-based electronics projects with Tinkercad

    By M.Eng. Johannes Wild

    ()

    Read preview

    About this ebook

    Attention: This book is a sequel to the book "Arduino Projects with Tinkercad" as well as to the beginner's book "Arduino  Step by Step". This book is aimed at advanced Arduino users and therefore requires some basic knowledge. It is recommended to work through the two books mentioned above before starting with this book.
    In this book, we will create some quite difficult but awesome projects for the Arduino Uno microcontroller. We'll use Autodesk's free online software Tinkercad to simulate and program the projects – just as we did in the preceding book. In Tinkercad, we will create – together and step by step – the circuit for each project, the block-based programming, and will simulate how it works. In each of the projects we will use sensors, e.g., a force sensor, a tilt sensor, a soil moisture sensor, an ambient light sensor and many more components. In addition, we will integrate actuators (servo motor, piezo …) that will perform a specific programmed action.
    I am an engineer (M.Eng.) and I want to introduce you to the topics of electronics, Arduino and block-based programming in Tinkercad. I will do this in a hands-on, enjoyable and easily explained way using DIY projects. You will find a very short refresher about the Arduino and Tinkercad (about 5 pages) in the first two chapters. If you need a more detailed introduction, it is recommended to take a look at the previous books in this series. After that, five quite difficult projects follow. We will realize them step by step (components, schematic, wiring, programming) by selecting the required components and creating the circuit and programming.
    No matter what age you are, whether you are still in school, whether you are already an adult, whether you are a student or a retiree, if you are interested in electronics, Arduino, or Tinkercad, this book is perfect for you! This book is for anyone who already has basic knowledge of using the Arduino and Tinkercad, as well as general basic knowledge of electronics. So, this book is for advanced users.
    Take a look inside now and get your copy as ebook or paperback!

    LanguageEnglish
    Publisher3DTech
    Release dateOct 7, 2022
    ISBN9783987420467
    Arduino Projects with Tinkercad | Part 2: Design & program advanced Arduino-based electronics projects with Tinkercad

    Read more from M.Eng. Johannes Wild

    Related to Arduino Projects with Tinkercad | Part 2

    Related ebooks

    Hardware For You

    View More
    View More

    Related podcast episodes

    Related categories

    Reviews for Arduino Projects with Tinkercad | Part 2

    0 ratings

    0 ratings0 reviews

    What did you think?

    Tap to rate

    Review must be at least 10 words

      Book preview

      Arduino Projects with Tinkercad | Part 2 - M.Eng. Johannes Wild

      Legal information

      © 2022

      Author and Editor: M.Eng. Johannes Wild

      A94689H39927F

      Email: [email protected]

      The complete imprint of the book can be found on the last pages!

      This work is protected by copyright

      The work, including its parts, is protected by copyright. Any use outside the narrow limits of copyright law without the consent of the author is prohibited. This applies in particular to electronic or other reproduction, translation, distribution and making publicly available. No part of the work may be reproduced, processed or distributed without written permission of the author! All rights reserved.

      All information contained in this book has been compiled to the best of our knowledge and has been carefully checked. However, the publisher and the author do not guarantee the timeliness, accuracy, completeness and quality of the information provided. This book is for educational purposes only and does not constitute a recommendation for action. The use of this book and the implementation of the information contained therein is expressly at your own risk. In particular, no warranty or liability is given for damages of a material or immaterial nature on the part of the author and publisher for the use or non-use of information in this book. This book does not claim to be complete or error-free. Legal claims and claims for damages are excluded. The operators of the respective Internet sites referred to in this book are exclusively responsible for the content of their site. The publisher and the author have no influence on the design and contents of third party internet web sites. The publisher and author therefore distance themselves from all external content. At the time of use, no illegal content was present on the websites. The trademarks and common names cited in this book remain the sole property of the respective author or rights holder.

      Caution: Electricity can be life-threatening

      Thank you so much for choosing this book!

      Foreword

      Thank you so much for choosing this book!

      Attention: This book is the sequel to the book Arduino Projects with Tinkercad, as well as to the beginner book Arduino | Step by Step. This book is aimed at advanced Arduino users and therefore requires some basic knowledge. It is best to work through the two books mentioned above before starting with this book.

      In this book we will create together and step by step a few complex and great projects with the microcontroller Arduino Uno. As in the previous book, we will use the easy-to-use and free online software Tinkercad from Autodesk to simulate and program the projects. In Tinkercad, we will create - together and step by step - the schematic for each project, create the programming using the block-based programming method, and simulate how it works. In each of the projects we will use sensors, e.g. a force sensor, a tilt sensor, a soil moisture sensor or an ambient light sensor and other components. In addition, we will integrate actuators (servo motor, piezo ...) that will perform a specific programmed action.

      I am an engineer (M.Eng.) and would like to introduce you to the topics of electronics, Arduino and block-based programming with Tinkercad, application-oriented, playful and simply explained using DIY projects. Therefore you will find in this book in the first two chapters a very short refresher about the Arduino and the program Tinkercad (about 5 pages). If you need a more detailed introduction, you should take a look at the previous books in this series. After that, five more complex projects will follow, which we will implement together and step by step (components, schematic, wiring, programming). Let's go!

      1 Scope of learning

      What you can expect in this book and what you will learn

      In this guide you will find five exciting and great projects that we will implement together and step by step. These projects are a bit more complex, as this book is intended for advanced users. For the electronic projects we use the microcontroller Arduino, as well as the software Tinkercad from Autodesk. In the first two chapters you will find a very short refresher on the Arduino and the Tinkercad program (about 5 pages). If you need a more detailed introduction, you should take a look at the previous books in this series, whose titles are mentioned in the preface.

      In this book, you will also be asked in places to carry out individual steps or even an entire project on your own. The solution will follow on the following pages. Try to implement these prompts, then you learn best!

      This book includes the following projects:

      -DIY project 1: car folding headlight with automatic low beam

      - DIY project 2: Complex alarm system with various sensors

      - DIY project 3: Plant monitoring and supply

      - DIY project 4: Parking aid and garage air

      Enjoying the preview?
      Page 1 of 1