Ti 84 Plus Calculator: QuickStudy Laminated Reference Guide

Overview of Keys

General Info & Basics

Turning the Calculator On & Off

To turn the calculator on, press

ON

.

To turn the calculator off, press

2nd

[OFF].

If the calculator is on but not used for about five minutes, it will automatically be powered down. Pressing

ON

will turn the calculator on, and the screen will return exactly as it was before it was powered down

Turning the calculator off by pressing

2nd

[OFF] clears any errors but does not clear settings and memory contents.

Adjusting Contrast

The TI-84 Plus has 40 contrast settings. To change contrast, press

2nd

and hold down or tap

▲

or

▼

. As you change the contrast, a number from 0 through 9 appears in the top-right corner; each number corresponds to four settings.

Choosing Commands

Many of the more advanced calculations that are used with the TI-84 Plus are located in various menus.

To access a menu, select it with the associated function key and then navigate through the menu using the arrows.

Many menus have submenus. To access a particular submenu, use the left and right arrows (

◀

,

▶

).

To select a command from a menu, enter the number or letter of the command or navigate using the arrows and press

ENTER

.

You can also choose commands and operations using the calculator’s catalog. Access the catalog by pressing

2nd

[CATALOG].

Replacing Batteries

The calculator uses four AAA batteries and one lithium battery. When the batteries in the calculator need to be replaced, a message displays on the screen. This message may last up to 1–2 weeks, depending on many factors. The calculator may not be able to download applications when the batteries are below a usable level.

To replace the lithium battery, remove the screw from the lithium battery cover and install the battery with the + side facing up. Replace the cover by screwing it back in place. Replacing both the AAA batteries and lithium battery at the same time is not recommended.

Setting Modes

Mode settings interpret how the TI-84 Plus displays and determines numbers and graphs. To change modes, press

MODE

, then use the arrow keys (

▲

,

▼

,

◀

,

▶

) and press

ENTER

when the desired setting is