Jump to content

Module:Location map/data/Canada/doc

විකිපීඩියා වෙතින්
Location map of Canada
name Canada
x 201.7818903*(((tan(pi*(90-$1)/360))*(((1+0.08181919084*sin(pi*$1/180))/(1-0.08181919084*sin(pi*$1/180)))^0.04090959542))^0.9007900864)*sin(0.01572175288*($2+95))+43.98563734
y 238.6252927*(((tan(pi*(90-$1)/360))*(((1+0.08181919084*sin(pi*$1/180))/(1-0.08181919084*sin(pi*$1/180)))^0.04090959542))^0.9007900864)*cos(0.01572175288*($2+95))-15.81495465
image Canada location map 2.svg
image1 Canada relief map 2.svg
Map of Canada

Module:Location map/data/Canada is a location map definition used to overlay markers and labels on a Lambert conformal conic projection map of Canada. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "Canada":

Map definition

  • name = Canada
    Name used in the default map caption
  • image = Canada location map 2.svg
    The default map image, without "Image:" or "File:"
  • image1 = Canada relief map 2.svg
    An alternative map image, usually a relief map, can be displayed via the relief or AlternativeMap parameters
  • x = 201.7818903*(((tan(pi*(90-$1)/360))*(((1+0.08181919084*sin(pi*$1/180))/(1-0.08181919084*sin(pi*$1/180)))^0.04090959542))^0.9007900864)*sin(0.01572175288*($2+95))+43.98563734
    An expression to calculate a location on the map via its longitude; evaluates as 0 along the left edge and 100 along the right edge
  • y = 238.6252927*(((tan(pi*(90-$1)/360))*(((1+0.08181919084*sin(pi*$1/180))/(1-0.08181919084*sin(pi*$1/180)))^0.04090959542))^0.9007900864)*cos(0.01572175288*($2+95))-15.81495465
    An expression to calculate a location on the map via its latitude; evaluates as 0 along the top edge and 100 along the bottom edge

Alternative map

The map defined as image1 (Canada relief map 2.svg) can be displayed by using the relief or AlternativeMap parameters in {{Location map}}, {{Location map many}} and {{Location map+}}. The use of these two parameters is shown in the examples below. Additional examples can be found at:

Examples using location map templates

Location map, using default map (image)

Ottawa is located in Canada
Ottawa
Ottawa
Ottawa (Canada)
{{Location map | Canada
| width   = 250
| lat_deg = 45.42
| lon_deg = -75.7
| label   = Ottawa
}}

Location map many, using relief map (image1)

Location map/data/Canada/doc is located in Canada
Ottawa
Ottawa
Vancouver
Vancouver
Two locations in Canada
{{Location map many | Canada
| relief   = yes
| width    = 250
| caption  = Two locations in Canada
| lat1_deg = 45.42
| lon1_deg = -75.7
| label1   = Ottawa
| lat2_deg = 49.25
| lon2_deg = -123.1
| label2   = Vancouver
}}

Location map+, using AlternativeMap

Location map/data/Canada/doc is located in Canada
Ottawa
Ottawa
Vancouver
Vancouver
Two locations in Canada
{{Location map+ | Canada
| AlternativeMap = Canada_blank_map.svg
| width   = 250
| caption = Two locations in Canada
| places  =
  {{Location map~ | Canada
  | lat_deg = 45.42
  | lon_deg = -75.7
  | label   = Ottawa
  }}
  {{Location map~ | Canada
  | lat_deg = 49.25
  | lon_deg = -123.1
  | label   = Vancouver
  }}
}}

See also

Location map templates
Infobox templates incorporating (passing values to) the Location map template
List