Getting Started with the Autonomous Kit for the Sphero RVR
Contributors:
santaimpersonator
Resources and Going Further
For more information on the SparkFun Autonomous Kit and the included hardware, check out the resources below:
GitHub Repositories:
Hardware:
Software:
- SparkFun Qwiic Python Package:
- I2C Driver Python Package
- Qwiic Titan GPS Python Package
- Pi Servo Hat Python Package
- Qwiic Mux (TCA9548A) Python Package
- Qwiic ToF (VL53L1X) Python Package
- SparkFun Autonoumous Kit Test Code
- Web Interface for Raspberry Pi Camera
Product Showcase Videos:
ReadtheDocs for Python Modules:
- Qwiic Titan GPS Python Package
- Pi Servo Hat Python Package
- Qwiic Mux (TCA9548A) Python Package
- Qwiic ToF (VL53L1X) Python Package
Raspberry Pi Documentation:
Sphero Resources:
Hardware Hookup Guides:
Setting Up the Pi Zero Wireless Pan-Tilt Camera
This tutorial will show you how to assemble, program, and access the Raspberry Pi Zero as a headless wireless pan-tilt camera.
Getting Started with the Raspberry Pi Zero Wireless
Learn how to setup, configure and use the smallest Raspberry Pi yet, the Raspberry Pi Zero - Wireless.
SparkFun GPS Breakout - XA1110 (Qwiic) Hookup Guide
Figure out where in the world you are with the Qwiic SparkFun GPS Breakout - XA1110.
Qwiic Distance Sensor (VL53L1X, VL53L4CD) Hookup Guide
The Qwiic Distance Sensor - VL53L1X is a time of flight sensor that is capable of several modes, as well as having a range of 4M. It's cousin VL53L4CD is also a time of flight sensor with similar characteristics but it has a range of about 1.3M. Let's hook it up and find out just how far away that thing over there is.
Qwiic MUX Hookup Guide
Have a bunch of sensors with the same I2C address? Put them on the Qwiic MUX (TCA9548A) to get them all talking on the same bus!
Pi Servo pHAT (v2) Hookup Guide
This hookup guide will get you started with connecting and using the Pi Servo pHAT on a Raspberry Pi.
Basic Autonomous Kit for Sphero RVR Assembly Guide
Get your Basic Autonomous Kit for Sphero RVR all hooked up with this guide!
Advanced Autonomous Kit for Sphero RVR Assembly Guide
Get your Advanced Autonomous Kit for the Sphero RVR built up with this hookup guide!
Interested in other robotics projects? Check out some of our robotics related tutorials below:
Hackers In Residence - The Tethered Quad
Our first-ever "Hackers in Residence" Tara Tiger Brown and Sean Bonner created a quadcopter that stays tethered to the ground. Here's how they did it!
ReconBot with the Tessel 2
Build a robot with the Tessel 2 that you can control from a browser on your phone or laptop.
Serial Controlled Motor Driver Hookup Guide
Hookup guide for the Serial Controlled Motor Driver
Building an Autonomous Vehicle: The Batmobile
Documenting a six-month project to race autonomous Power Wheels at the SparkFun Autonomous Vehicle Competition (AVC) in 2016.
SparkFun Inventor's Kit Experiment Guide - v4.0
The SparkFun Inventor's Kit (SIK) Experiment Guide contains all of the information needed to build all five projects, encompassing 16 circuits, in the latest version of the kit, v4.0a.
Wireless RC Robot with Arduino and XBees
In this tutorial, we will expand on the SIK for RedBot to control the robot wirelessly with XBee radios! We'll explore a different microcontroller and wirelessly control the RedBot at a distance.
Pi Servo pHAT (v2) Hookup Guide
This hookup guide will get you started with connecting and using the Pi Servo pHAT on a Raspberry Pi.
SparkFun ProDriver and Mini Stepper Motor Driver Hookup Guide
The SparkFun ProDriver and Mini Stepper Motor Driver boards utilize Toshiba's TC78H670FTG stepper motor driver. The ProDriver features latch pin terminals, which are easier to connect than the "Easy" Drivers. Meanwhile, the Mini Stepper Motor Driver come in smaller PCB footprint, that is pin compatible with breadboards. To get started, follow this hookup guide and you will be spinning stepper motors, in no time.