arduino-copilot (1.4.0) unstable; urgency=medium * New Copilot.Arduino.Library.EEPROMex module. * Serial: Added FlashString, to display strings directly from flash without copying into ram. * Added millis and micros. * MicroSeconds and MilliSeconds types changed to contain a Word32 not a Word16. * Renamed Voltage to ADC * Added frequency. -- Joey Hess <[email protected]> Sat, 01 Feb 2020 16:30:43 -0400 arduino-copilot (1.3.0) unstable; urgency=medium * New polymorphic "input" action that can be used to read digital and analog pins, as well as read from serial ports, and replaces readfrom, readvoltage, etc. * Replaced PWMDutyCycle with pwm. * Changed the Serial and XBee modules to work with the =: operator and "input". -- Joey Hess <[email protected]> Thu, 30 Jan 2020 22:33:20 -0400 arduino-copilot (1.2.0) unstable; urgency=medium * Bugfix: Doing the same kind of write to two different pins in the same program caused the C generated by Copilot to not compile. * Several changes making the API more FRP style, including adding Behavior and Event types. * Removed writeto and pwm, instead the type of a value connected to a pin with =: determines how the pin is driven. * delay now takes a value in MilliSeconds or MicroSeconds. * Generalized serial port interface, added support for XBee. -- Joey Hess <[email protected]> Tue, 28 Jan 2020 20:39:11 -0400 arduino-copilot (1.1.1) unstable; urgency=medium * New Copilot.Arduino.Library.Serial module. * Added the analog pins for Uno and Nano, and support using them for digital IO, when the hardware allows that to be done. * Support reading voltage from analog pins. * Support PWM. * Added a way to enable pullup resistors for input pins. * Detect if a program tries to use the same pin for both input and output. This is not currently supported, so it will refuse to build the program. * Copilot.Arduino.Internals API changed. -- Joey Hess <[email protected]> Sun, 26 Jan 2020 20:37:26 -0400 arduino-copilot (1.0.1) unstable; urgency=medium * Move example from cabal description (where it did not render correctly) to README. -- Joey Hess <[email protected]> Sat, 25 Jan 2020 16:01:19 -0400 arduino-copilot (1.0.0) unstable; urgency=medium * First release. -- Joey Hess <[email protected]> Sat, 25 Jan 2020 10:33:09 -0400