From: itojun <itojun>
Date: Sat, 15 Jan 2000 07:35:56 +0000 (+0000)
Subject: disable ".devel" case as it confuses autoconf 2.13 (at least on NetBSD).
X-Git-Tag: tcpdump-3.5.1~415
X-Git-Url: https://git.tcpdump.org/tcpdump/commitdiff_plain/d4591b562622ea121c365261679857170422673d

disable ".devel" case as it confuses autoconf 2.13 (at least on NetBSD).
---

diff --git a/configure b/configure
index 091fc113..167bfa5a 100755
--- a/configure
+++ b/configure
@@ -4480,9 +4480,15 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 
 
-if test -f .devel ; then
-	cat Makefile.in Makefile-devel-adds > Makefile-devel.in
-	trap '' 1 2 15
+#if test -f .devel ; then
+#	cat Makefile.in Makefile-devel-adds > Makefile-devel.in
+#	AC_OUTPUT(Makefile:Makefile-devel.in, echo timestamp > stamp-h)
+#	make depend
+#else
+#	AC_OUTPUT(Makefile)
+#fi
+#exit 0
+trap '' 1 2 15
 cat > confcache <<\EOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
@@ -4583,7 +4589,7 @@ done
 ac_given_srcdir=$srcdir
 ac_given_INSTALL="$INSTALL"
 
-trap 'rm -fr `echo "Makefile:Makefile-devel.in config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
 EOF
 cat >> $CONFIG_STATUS <<EOF
 
@@ -4683,337 +4689,6 @@ EOF
 
 cat >> $CONFIG_STATUS <<EOF
 
-CONFIG_FILES=\${CONFIG_FILES-"Makefile:Makefile-devel.in"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
-ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
-ac_dC='\3'
-ac_dD='%g'
-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
-ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_uB='\([ 	]\)%\1#\2define\3'
-ac_uC=' '
-ac_uD='\4%g'
-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_eB='$%\1#\2define\3'
-ac_eC=' '
-ac_eD='%g'
-
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
-  CONFIG_HEADERS="config.h"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  echo creating $ac_file
-
-  rm -f conftest.frag conftest.in conftest.out
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  cat $ac_file_inputs > conftest.in
-
-EOF
-
-# Transform confdefs.h into a sed script conftest.vals that substitutes
-# the proper values into config.h.in to produce config.h.  And first:
-# Protect against being on the right side of a sed subst in config.status.
-# Protect against being in an unquoted here document in config.status.
-rm -f conftest.vals
-cat > conftest.hdr <<\EOF
-s/[\\&%]/\\&/g
-s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
-s%ac_d%ac_u%gp
-s%ac_u%ac_e%gp
-EOF
-sed -n -f conftest.hdr confdefs.h > conftest.vals
-rm -f conftest.hdr
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >> conftest.vals <<\EOF
-s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
-EOF
-
-# Break up conftest.vals because some shells have a limit on
-# the size of here documents, and old seds have small limits too.
-
-rm -f conftest.tail
-while :
-do
-  ac_lines=`grep -c . conftest.vals`
-  # grep -c gives empty output for an empty file on some AIX systems.
-  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
-  # Write a limited-size here document to conftest.frag.
-  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
-  echo 'CEOF
-  sed -f conftest.frag conftest.in > conftest.out
-  rm -f conftest.in
-  mv conftest.out conftest.in
-' >> $CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
-  rm -f conftest.vals
-  mv conftest.tail conftest.vals
-done
-rm -f conftest.vals
-
-cat >> $CONFIG_STATUS <<\EOF
-  rm -f conftest.frag conftest.h
-  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
-  cat conftest.in >> conftest.h
-  rm -f conftest.in
-  if cmp -s $ac_file conftest.h 2>/dev/null; then
-    echo "$ac_file is unchanged"
-    rm -f conftest.h
-  else
-    # Remove last slash and all that follows it.  Not all systems have dirname.
-      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-      # The file is in a subdirectory.
-      test ! -d "$ac_dir" && mkdir "$ac_dir"
-    fi
-    rm -f $ac_file
-    mv conftest.h $ac_file
-  fi
-fi; done
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-echo timestamp > stamp-h
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-	make depend
-else
-	trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-DEFS=-DHAVE_CONFIG_H
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
 CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
 EOF
 cat >> $CONFIG_STATUS <<\EOF
@@ -5192,5 +4867,3 @@ chmod +x $CONFIG_STATUS
 rm -fr confdefs* $ac_clean_files
 test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
 
-fi
-exit 0
diff --git a/configure.in b/configure.in
index 13aab89c..c635a911 100644
--- a/configure.in
+++ b/configure.in
@@ -1,4 +1,4 @@
-dnl @(#) $Header: /tcpdump/master/tcpdump/configure.in,v 1.96 2000-01-15 01:58:56 mcr Exp $ (LBL)
+dnl @(#) $Header: /tcpdump/master/tcpdump/configure.in,v 1.97 2000-01-15 07:35:56 itojun Exp $ (LBL)
 dnl
 dnl Copyright (c) 1994, 1995, 1996, 1997
 dnl	The Regents of the University of California.  All rights reserved.
@@ -6,7 +6,7 @@ dnl
 dnl Process this file with autoconf to produce a configure script.
 dnl
 
-AC_REVISION($Revision: 1.96 $)
+AC_REVISION($Revision: 1.97 $)
 AC_INIT(tcpdump.c)
 
 AC_CANONICAL_SYSTEM
@@ -637,12 +637,12 @@ AC_PROG_INSTALL
 
 AC_CONFIG_HEADER(config.h)
 
-
-if test -f .devel ; then
-	cat Makefile.in Makefile-devel-adds > Makefile-devel.in
-	AC_OUTPUT(Makefile:Makefile-devel.in, echo timestamp > stamp-h)
-	make depend
-else
-	AC_OUTPUT(Makefile)
-fi
-exit 0
+dnl if test -f .devel ; then
+dnl 	cat Makefile.in Makefile-devel-adds > Makefile-devel.in
+dnl 	AC_OUTPUT(Makefile:Makefile-devel.in, echo timestamp > stamp-h)
+dnl 	make depend
+dnl else
+dnl 	AC_OUTPUT(Makefile)
+dnl fi
+dnl exit 0
+AC_OUTPUT(Makefile)