print-bfd.c
print-bgp.c
print-bootp.c
+print-bt.c
print-cdp.c
print-cfm.c
print-chdlc.c
-@(#) $Header: /tcpdump/master/tcpdump/Attic/INSTALL,v 1.70 2007-09-14 01:02:07 guy Exp $ (LBL)
+@(#) $Header: /tcpdump/master/tcpdump/Attic/INSTALL,v 1.71 2007-09-24 23:46:26 guy Exp $ (LBL)
If you have not built libpcap, and your system does not have libpcap
installed, install libpcap first. Your system might provide a version
print-ascii.c - ASCII packet dump routines
print-atalk.c - AppleTalk printer routines
print-atm.c - ATM printer routines
+print-beep.c - BEEP printer routines
print-bgp.c - Border Gateway Protocol printer routines
print-bootp.c - BOOTP and IPv4 DHCP printer routines
-print-beep.c - BEEP printer routines
+print-bt.c - Bluetooth printer routines
print-cdp.c - Cisco Discovery Protocol printer routines
print-chdlc.c - Cisco HDLC printer routines
print-cip.c - Classical-IP over ATM routines
# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
#
-# @(#) $Header: /tcpdump/master/tcpdump/Makefile.in,v 1.316 2007-09-12 19:36:18 guy Exp $ (LBL)
+# @(#) $Header: /tcpdump/master/tcpdump/Makefile.in,v 1.317 2007-09-24 23:46:26 guy Exp $ (LBL)
#
# Various configurable paths (remember to edit Makefile.in, not Makefile)
nlpid.c l2vpn.c machdep.c parsenfsfh.c \
print-802_11.c print-ap1394.c print-ah.c print-arcnet.c \
print-aodv.c print-arp.c print-ascii.c print-atalk.c print-atm.c \
- print-beep.c print-bfd.c print-bgp.c print-bootp.c print-cdp.c \
- print-cfm.c print-chdlc.c print-cip.c print-cnfp.c print-dccp.c print-decnet.c \
+ print-beep.c print-bfd.c print-bgp.c print-bootp.c print-bt.c \
+ print-cdp.c print-cfm.c print-chdlc.c print-cip.c print-cnfp.c \
+ print-dccp.c print-decnet.c \
print-domain.c print-dtp.c print-dvmrp.c print-enc.c print-egp.c \
print-eap.c print-eigrp.c\
print-esp.c print-ether.c print-fddi.c print-fr.c \
* WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*
- * @(#) $Header: /tcpdump/master/tcpdump/interface.h,v 1.279 2007-08-29 12:31:00 mcr Exp $ (LBL)
+ * @(#) $Header: /tcpdump/master/tcpdump/interface.h,v 1.280 2007-09-24 23:46:27 guy Exp $ (LBL)
*/
#ifndef tcpdump_interface_h
extern void bfd_print(const u_char *, u_int, u_int);
extern void sip_print(const u_char *, u_int);
extern void syslog_print(const u_char *, u_int);
+extern u_int bt_if_print(const struct pcap_pkthdr *, const u_char *);
#ifdef INET6
extern void ip6_print(const u_char *, u_int);
--- /dev/null
+/*
+ * Copyright (c) 2007
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that: (1) source code distributions
+ * retain the above copyright notice and this paragraph in its entirety, (2)
+ * distributions including binary code include the above copyright notice and
+ * this paragraph in its entirety in the documentation or other materials
+ * provided with the distribution, and (3) all advertising materials mentioning
+ * features or use of this software display the following acknowledgement:
+ * ``This product includes software developed by Paolo Abeni.''
+ * The name of author may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef lint
+static const char rcsid[] _U_ =
+ "@(#) $Header: /tcpdump/master/tcpdump/print-bt.c,v 1.1 2007-09-24 23:46:27 guy Exp $";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <tcpdump-stdinc.h>
+
+#include <pcap.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "interface.h"
+#include "addrtoname.h"
+
+#ifdef DLT_BLUETOOTH_HCI_H4_WITH_PHDR
+#include <pcap/bluetooth.h>
+
+#define BT_HDRLEN sizeof(pcap_bluetooth_h4_header)
+/*
+ * This is the top level routine of the printer. 'p' points
+ * to the bluetooth header of the packet, 'h->ts' is the timestamp,
+ * 'h->len' is the length of the packet off the wire, and 'h->caplen'
+ * is the number of bytes actually captured.
+ */
+u_int
+bt_if_print(const struct pcap_pkthdr *h, const u_char *p)
+{
+ u_int length = h->len;
+ u_int caplen = h->caplen;
+ const pcap_bluetooth_h4_header* hdr = (const pcap_bluetooth_h4_header*)p;
+
+ if (caplen < BT_HDRLEN) {
+ printf("[|bt]");
+ return (BT_HDRLEN);
+ }
+ caplen -= BT_HDRLEN;
+ length -= BT_HDRLEN;
+ p += BT_HDRLEN;
+ if (eflag)
+ (void)printf("hci length %d, direction %s, ", length, (ntohl(hdr->direction)&0x1)?"in":"out");
+
+ if (!suppress_default_print)
+ default_print(p, caplen);
+
+ return (BT_HDRLEN);
+}
+#endif
+
+
+/*
+ * Local Variables:
+ * c-style: whitesmith
+ * c-basic-offset: 8
+ * End:
+ */
"@(#) Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 2000\n\
The Regents of the University of California. All rights reserved.\n";
static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/tcpdump/tcpdump.c,v 1.270 2007-09-12 19:36:18 guy Exp $ (LBL)";
+ "@(#) $Header: /tcpdump/master/tcpdump/tcpdump.c,v 1.271 2007-09-24 23:46:27 guy Exp $ (LBL)";
#endif
/*
#endif
#ifdef DLT_MFR
{ mfr_if_print, DLT_MFR },
+#endif
+#ifdef DLT_BLUETOOTH_HCI_H4_WITH_PHDR
+ { bt_if_print, DLT_BLUETOOTH_HCI_H4_WITH_PHDR},
#endif
{ NULL, 0 },
};