-#!/usr/bin/env bash
+#!/bin/sh -e
# This script runs one build with setup environment variables: BUILD_LIBPCAP,
-# REMOTE, CC, CMAKE, CRYPTO and SMB
-# (default: BUILD_LIBPCAP=no, REMOTE=no, CC=gcc, CMAKE=no, CRYPTO=no, SMB=no).
+# REMOTE, CC, CMAKE, CRYPTO and SMB.
-set -e
+: "${BUILD_LIBPCAP:=no}"
+: "${REMOTE:=no}"
+: "${CC:=gcc}"
+: "${CMAKE:=no}"
+: "${CRYPTO:=no}"
+: "${SMB:=no}"
+: "${TCPDUMP_TAINTED:=no}"
+: "${TCPDUMP_CMAKE_TAINTED:=no}"
+: "${MAKE_BIN:=make}"
-# BUILD_LIBPCAP: no or yes
-BUILD_LIBPCAP=${BUILD_LIBPCAP:-no}
-# REMOTE: no or yes
-REMOTE=${REMOTE:-no}
-# CC: gcc or clang
-CC=${CC:-gcc}
-# CMAKE: no or yes
-CMAKE=${CMAKE:-no}
-# CRYPTO: no or yes
-CRYPTO=${CRYPTO:-no}
-# SMB: no or yes
-SMB=${SMB:-no}
+. ./build_common.sh
# Install directory prefix
-PREFIX=/tmp/local
+if [ -z "$PREFIX" ]; then
+ PREFIX=`mktempdir tcpdump_build`
+ echo "PREFIX set to '$PREFIX'"
+fi
+TCPDUMP_BIN="$PREFIX/bin/tcpdump"
# For TESTrun
-export TCPDUMP_BIN=/tmp/local/bin/tcpdump
+export TCPDUMP_BIN
+
+print_cc_version
+
+# The norm is to compile without any warnings, but tcpdump builds on some OSes
+# are not warning-free for one or another reason. If you manage to fix one of
+# these cases, please remember to remove respective exemption below to help any
+# later warnings in the same matrix subset trigger an error.
+
+case `cc_id`/`os_id` in
+clang-*/SunOS-5.11)
+ # (Clang 9 on OpenIndiana, Clang 11 on OmniOS)
+ # tcpdump.c:2312:51: warning: this function declaration is not a prototype
+ # [-Wstrict-prototypes]
+ # tcpdump.c:2737:11: warning: this function declaration is not a prototype
+ # [-Wstrict-prototypes]
+ [ "`uname -o`" = illumos ] && TCPDUMP_TAINTED=yes
+ ;;
+esac
-travis_fold() {
- local action="$1"
- local name="$2"
- if [ "$TRAVIS" != true ]; then return; fi
- echo -ne "travis_fold:$action:$LABEL.script.$name\\r"
- sleep 1
-}
+[ "$TCPDUMP_TAINTED" != yes ] && CFLAGS=`cc_werr_cflags`
-# Run a command after displaying it
-run_after_echo() {
- echo -n '$ '
- echo "$@"
- $@
-}
+# If necessary, set TCPDUMP_CMAKE_TAINTED here to exempt particular cmake from
+# warnings. Use as specific terms as possible (e.g. some specific version and
+# some specific OS).
+
+[ "$TCPDUMP_CMAKE_TAINTED" != yes ] && CMAKE_OPTIONS='-Werror=dev'
-# LABEL is needed to build the travis fold labels
-LABEL="$BUILD_LIBPCAP.$REMOTE.$CC.$CMAKE.$CRYPTO.$SMB"
if [ "$CMAKE" = no ]; then
- echo '$ ./configure [...]'
- travis_fold start configure
if [ "$BUILD_LIBPCAP" = yes ]; then
echo "Using PKG_CONFIG_PATH=$PKG_CONFIG_PATH"
- ./configure --with-crypto="$CRYPTO" --enable-smb="$SMB" --prefix=$PREFIX
- export LD_LIBRARY_PATH=$PREFIX/lib
+ run_after_echo ./autogen.sh
+ run_after_echo ./configure --with-crypto="$CRYPTO" \
+ --enable-smb="$SMB" --prefix="$PREFIX"
+ LD_LIBRARY_PATH="$PREFIX/lib"
+ export LD_LIBRARY_PATH
else
- ./configure --disable-local-libpcap --with-crypto="$CRYPTO" --enable-smb="$SMB" --prefix=$PREFIX
+ run_after_echo ./autogen.sh
+ run_after_echo ./configure --with-crypto="$CRYPTO" \
+ --enable-smb="$SMB" --prefix="$PREFIX" --disable-local-libpcap
fi
- travis_fold end configure
else
- rm -rf build
- mkdir build
- cd build
- echo '$ cmake [...]'
- travis_fold start cmake
+ # See libpcap build.sh for the rationale.
+ run_after_echo rm -rf CMakeFiles/ CMakeCache.txt build/
+ run_after_echo mkdir build
+ run_after_echo cd build
if [ "$BUILD_LIBPCAP" = yes ]; then
- cmake -DWITH_CRYPTO="$CRYPTO" -DENABLE_SMB="$SMB" -DCMAKE_PREFIX_PATH=$PREFIX -DCMAKE_INSTALL_PREFIX=$PREFIX ..
- export LD_LIBRARY_PATH=$PREFIX/lib
+ run_after_echo cmake "$CMAKE_OPTIONS" \
+ -DWITH_CRYPTO="$CRYPTO" -DENABLE_SMB="$SMB" \
+ ${CFLAGS:+-DEXTRA_CFLAGS="$CFLAGS"} \
+ -DCMAKE_INSTALL_PREFIX="$PREFIX" -DCMAKE_PREFIX_PATH="$PREFIX" ..
+ LD_LIBRARY_PATH="$PREFIX/lib"
+ export LD_LIBRARY_PATH
else
- cmake -DWITH_CRYPTO="$CRYPTO" -DENABLE_SMB="$SMB" -DCMAKE_INSTALL_PREFIX=$PREFIX ..
+ run_after_echo cmake "$CMAKE_OPTIONS" \
+ -DWITH_CRYPTO="$CRYPTO" -DENABLE_SMB="$SMB" \
+ ${CFLAGS:+-DEXTRA_CFLAGS="$CFLAGS"} \
+ -DCMAKE_INSTALL_PREFIX="$PREFIX" ..
fi
- travis_fold end cmake
fi
-run_after_echo "make -s clean"
-run_after_echo "make -s CFLAGS=-Werror"
-echo '$ make install'
-travis_fold start make_install
-make install
-travis_fold end make_install
-run_after_echo "$TCPDUMP_BIN --version"
-run_after_echo "$TCPDUMP_BIN -h"
-run_after_echo "$TCPDUMP_BIN -D"
-system=$(uname -s)
-if [ "$system" = Linux ]; then
- run_after_echo "ldd $TCPDUMP_BIN"
+run_after_echo "$MAKE_BIN" -s clean
+if [ "$CMAKE" = no ]; then
+ run_after_echo "$MAKE_BIN" -s ${CFLAGS:+CFLAGS="$CFLAGS"}
+else
+ # The "-s" flag is a no-op and CFLAGS is set using -DEXTRA_CFLAGS above.
+ run_after_echo "$MAKE_BIN"
fi
-if [ "$TRAVIS" = true ]; then
- if [ -n "$LD_LIBRARY_PATH" ]; then
- run_after_echo "sudo LD_LIBRARY_PATH=$LD_LIBRARY_PATH $TCPDUMP_BIN -J"
- run_after_echo "sudo LD_LIBRARY_PATH=$LD_LIBRARY_PATH $TCPDUMP_BIN -L"
- else
- run_after_echo "sudo $TCPDUMP_BIN -J"
- run_after_echo "sudo $TCPDUMP_BIN -L"
- fi
+run_after_echo "$MAKE_BIN" install
+print_so_deps "$TCPDUMP_BIN"
+run_after_echo "$TCPDUMP_BIN" -h
+# The "-D" flag depends on HAVE_PCAP_FINDALLDEVS and it would not be difficult
+# to run the command below only if the macro is defined. That said, it seems
+# more useful to run it anyway: every system that currently runs this script
+# has pcap_findalldevs(), thus if the macro isn't defined, it means something
+# went wrong in the build process (as was observed with GCC, CMake and the
+# system libpcap on Solaris 11).
+run_after_echo "$TCPDUMP_BIN" -D
+if [ "$CIRRUS_CI" = true ]; then
+ # Likewise for the "-J" flag and HAVE_PCAP_SET_TSTAMP_TYPE.
+ run_after_echo sudo \
+ ${LD_LIBRARY_PATH:+LD_LIBRARY_PATH="$LD_LIBRARY_PATH"} \
+ "$TCPDUMP_BIN" -J
+ run_after_echo sudo \
+ ${LD_LIBRARY_PATH:+LD_LIBRARY_PATH="$LD_LIBRARY_PATH"} \
+ "$TCPDUMP_BIN" -L
fi
if [ "$BUILD_LIBPCAP" = yes ]; then
- run_after_echo "make check"
+ run_after_echo "$MAKE_BIN" check
fi
if [ "$CMAKE" = no ]; then
- system=$(uname -s)
- if [ "$system" = Darwin ] || [ "$system" = Linux ]; then
- run_after_echo "make releasetar"
- fi
+ run_after_echo "$MAKE_BIN" releasetar
fi
-if [ "$TRAVIS" = true ]; then
- if [ "$TRAVIS_OS_NAME" = linux ] && [ "$TRAVIS_CPU_ARCH" != ppc64le ] && [ "$TRAVIS_CPU_ARCH" != s390x ] && [ "$TRAVIS_CPU_ARCH" != arm64 ]; then
- if [ -n "$LD_LIBRARY_PATH" ]; then
- run_after_echo "sudo LD_LIBRARY_PATH=$LD_LIBRARY_PATH $TCPDUMP_BIN -#n -c 10"
- else
- run_after_echo "sudo $TCPDUMP_BIN -#n -c 10"
- fi
- fi
+if [ "$CIRRUS_CI" = true ]; then
+ run_after_echo sudo \
+ ${LD_LIBRARY_PATH:+LD_LIBRARY_PATH="$LD_LIBRARY_PATH"} \
+ "$TCPDUMP_BIN" -#n -c 10
fi
-# The DEBUG_BUILD variable is not set by default to avoid Travis error message:
-# "The job exceeded the maximum log length, and has been terminated."
-# Setting it needs to reduce the matrix cases.
-if [ "$TRAVIS" = true ] && [ -n "$DEBUG_BUILD" ] ; then
- echo '$ cat Makefile [...]'
- travis_fold start cat_makefile
- if [ "$CMAKE" = no ]; then
- sed -n '1,/DO NOT DELETE THIS LINE -- mkdep uses it/p' < Makefile
- else
- cat Makefile
- fi
- travis_fold end cat_makefile
- echo '$ cat config.h'
- travis_fold start cat_config_h
- cat config.h
- travis_fold end cat_config_h
- if [ "$CMAKE" = no ]; then
- echo '$ cat config.log'
- travis_fold start cat_config_log
- cat config.log
- travis_fold end cat_config_log
- fi
+handle_matrix_debug
+if [ "$DELETE_PREFIX" = yes ]; then
+ run_after_echo rm -rf "$PREFIX"
fi
# vi: set tabstop=4 softtabstop=0 expandtab shiftwidth=4 smarttab autoindent :
projects / tcpdump / blobdiff