# Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
-# The Regents of the University of California. All rights reserved.
+# The Regents of the University of California. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that: (1) source code distributions
exec_prefix = @exec_prefix@
datarootdir = @datarootdir@
# Pathname of directory to install the binary
-sbindir = @sbindir@
+bindir = @bindir@
# Pathname of directory to install the man page
mandir = @mandir@
print-null.c \
print-olsr.c \
print-openflow-1.0.c \
+ print-openflow-1.3.c \
print-openflow.c \
print-ospf.c \
print-ospf6.c \
print-otv.c \
+ print-pflog.c \
print-pgm.c \
print-pim.c \
print-pktap.c \
print-pppoe.c \
print-pptp.c \
print-ptp.c \
+ print-quic.c \
print-radius.c \
print-raw.c \
+ print-realtek.c \
print-resp.c \
print-rip.c \
print-ripng.c \
print-rpki-rtr.c \
- print-rrcp.c \
print-rsvp.c \
print-rt6.c \
print-rtsp.c \
print-vxlan-gpe.c \
print-vxlan.c \
print-wb.c \
+ print-whois.c \
print-zep.c \
print-zephyr.c \
print-zeromq.c \
LIBNETDISSECT=libnetdissect.a
-SRC = $(CSRC) $(GENSRC) $(LOCALSRC)
+SRC = $(CSRC) $(LOCALSRC)
-# We would like to say "OBJ = $(SRC:.c=.o)" but Ultrix's make cannot
-# hack the extra indirection
-OBJ = $(CSRC:.c=.o) $(GENSRC:.c=.o)
+OBJ = $(CSRC:.c=.o)
HDR = \
addrtoname.h \
addrtostr.h \
chdlc.h \
compiler-tests.h \
cpack.h \
+ diag-control.h \
ethertype.h \
extract.h \
fptype.h \
+ ftmacros.h \
funcattrs.h \
getservent.h \
gmpls.h \
ospf.h \
oui.h \
pcap-missing.h \
+ pflog.h \
ppp.h \
print.h \
rpc_auth.h \
varattrs.h
TAGHDR = \
- /usr/include/arpa/tftp.h \
- /usr/include/net/if_arp.h \
/usr/include/netinet/if_ether.h \
- /usr/include/netinet/in.h \
- /usr/include/netinet/ip_icmp.h \
- /usr/include/netinet/tcp.h \
- /usr/include/netinet/udp.h \
- /usr/include/protocols/routed.h
+ /usr/include/netinet/in.h
TAGFILES = $(SRC) $(HDR) $(TAGHDR) $(LIBNETDISSECT_SRC) \
- print-pflog.c print-smb.c smbutil.c
+ print-smb.c smbutil.c
-CLEANFILES = $(PROG) $(OBJ) $(GENSRC) $(LIBNETDISSECT_OBJ)
+CLEANFILES = $(PROG) $(OBJ) $(LIBNETDISSECT_OBJ)
EXTRA_DIST = \
CHANGES \
- CONTRIBUTING \
- CREDITS \
CMakeLists.txt \
- INSTALL.txt \
+ CONTRIBUTING.md \
+ CREDITS \
+ INSTALL.md \
LICENSE \
- Makefile.in \
Makefile-devel-adds \
- PLATFORMS \
- README \
+ Makefile.in \
README.md \
- Readme.Win32 \
VERSION \
aclocal.m4 \
+ autogen.sh \
atime.awk \
bpf_dump.c \
- cmake_uninstall.cmake.in \
- cmakeconfig.h.in \
cmake/Modules/FindCRYPTO.cmake \
cmake/Modules/FindPCAP.cmake \
cmake/Modules/FindSMI.cmake \
+ cmake_uninstall.cmake.in \
+ cmakeconfig.h.in \
config.guess \
- config.h.in \
config.sub \
- configure \
configure.ac \
+ doc/README.aix.md \
+ doc/README.haiku.md \
+ doc/README.NetBSD.md \
+ doc/README.solaris.md \
doc/README.Win32.md \
install-sh \
- lbl/os-osf4.h \
- lbl/os-solaris2.h \
- lbl/os-sunos4.h \
- lbl/os-ultrix4.h \
+ instrument-functions.c \
makemib \
- missing/dlnames.c \
missing/datalinks.c \
- missing/getopt_long.h \
+ missing/dlnames.c \
missing/getopt_long.c \
+ missing/getopt_long.h \
missing/getservent.c \
missing/pcap_dump_ftell.c \
- missing/snprintf.c \
- missing/strdup.c \
missing/strlcat.c \
missing/strlcpy.c \
missing/strsep.c \
- missing/win_ether_ntohost.c \
- missing/win_ether_ntohost.h \
mkdep \
packetdat.awk \
- print-pflog.c \
print-smb.c \
send-ack.awk \
smbutil.c \
stime.awk \
- tcpdump.1.in \
- win32/prj/WinDump.dsp \
- win32/prj/WinDump.dsw \
- win32/prj/WinDump.sln \
- win32/prj/WinDump.vcproj
+ tcpdump.1.in
+
+TEST_DIST= `git -C "$$DIR" ls-files tests | grep -v 'tests/\..*'`
-TEST_DIST= `git ls-files tests | grep -v 'tests/\..*'`
+RELEASE_FILES = $(CSRC) $(HDR) $(LIBNETDISSECT_SRC) $(EXTRA_DIST) $(TEST_DIST)
all: $(PROG)
@rm -f $@
$(CC) $(FULL_CFLAGS) $(LDFLAGS) -o $@ $(OBJ) $(LIBNETDISSECT) $(LIBS)
+instrument_all: $(PROG)
+ @rm -f instrument_functions_global.devel
+ @rm -f instrument_functions_off.devel
+
+instrument_global: $(PROG)
+ @touch instrument_functions_global.devel
+ @rm -f instrument_functions_off.devel
+
+instrument_off: $(PROG)
+ @touch instrument_functions_off.devel
+ @rm -f instrument_functions_global.devel
+
$(LIBNETDISSECT): $(LIBNETDISSECT_OBJ)
@rm -f $@
$(AR) cr $@ $(LIBNETDISSECT_OBJ)
$(CC) $(FULL_CFLAGS) -o $@ -c $(srcdir)/missing/getservent.c
getopt_long.o: $(srcdir)/missing/getopt_long.c
$(CC) $(FULL_CFLAGS) -o $@ -c $(srcdir)/missing/getopt_long.c
-snprintf.o: $(srcdir)/missing/snprintf.c
- $(CC) $(FULL_CFLAGS) -o $@ -c $(srcdir)/missing/snprintf.c
-strdup.o: $(srcdir)/missing/strdup.c
- $(CC) $(FULL_CFLAGS) -o $@ -c $(srcdir)/missing/strdup.c
strlcat.o: $(srcdir)/missing/strlcat.c
$(CC) $(FULL_CFLAGS) -o $@ -c $(srcdir)/missing/strlcat.c
strlcpy.o: $(srcdir)/missing/strlcpy.c
$(CC) $(FULL_CFLAGS) -o $@ -c $(srcdir)/missing/pcap_dump_ftell.c
install: all
- [ -d $(DESTDIR)$(sbindir) ] || \
- (mkdir -p $(DESTDIR)$(sbindir); chmod 755 $(DESTDIR)$(sbindir))
- $(INSTALL_PROGRAM) $(PROG) $(DESTDIR)$(sbindir)/$(PROG)
- $(INSTALL_PROGRAM) $(PROG) $(DESTDIR)$(sbindir)/$(PROG).`cat ${srcdir}/VERSION`
+ [ -d $(DESTDIR)$(bindir) ] || \
+ (mkdir -p $(DESTDIR)$(bindir); chmod 755 $(DESTDIR)$(bindir))
+ $(INSTALL_PROGRAM) $(PROG) $(DESTDIR)$(bindir)/$(PROG)
+ $(INSTALL_PROGRAM) $(PROG) $(DESTDIR)$(bindir)/$(PROG).`cat ${srcdir}/VERSION`
[ -d $(DESTDIR)$(mandir)/man1 ] || \
(mkdir -p $(DESTDIR)$(mandir)/man1; chmod 755 $(DESTDIR)$(mandir)/man1)
$(INSTALL_DATA) $(PROG).1 $(DESTDIR)$(mandir)/man1/$(PROG).1
uninstall:
- rm -f $(DESTDIR)$(sbindir)/$(PROG)
+ rm -f $(DESTDIR)$(bindir)/$(PROG)
+ rm -f $(DESTDIR)$(bindir)/$(PROG).`cat ${srcdir}/VERSION`
rm -f $(DESTDIR)$(mandir)/man1/$(PROG).1
-lint: $(GENSRC)
+lint:
lint -hbxn $(SRC) $(LIBNETDISSECT_SRC) | \
grep -v 'struct/union .* never defined' | \
grep -v 'possible pointer alignment problem'
clean:
- rm -f $(CLEANFILES) $(PROG)-`cat VERSION`.tar.gz
+ rm -f $(CLEANFILES) $(PROG)-`cat ${srcdir}/VERSION`.tar.gz \
+ config.h.in~ configure~ configure.ac~
-distclean:
- rm -f $(CLEANFILES) Makefile config.cache config.log config.status \
- config.h gnuc.h os-proto.h stamp-h stamp-h.in $(PROG).1 \
+distclean: clean
+ rm -f Makefile config.cache config.log config.status \
+ config.h os-proto.h stamp-h stamp-h.in $(PROG).1 \
libnetdissect.a tests/.failed tests/.passed \
tests/failure-outputs.txt
rm -rf autom4te.cache tests/DIFF tests/NEW
TAGS: $(TAGFILES)
etags $(TAGFILES)
+#
+# Use git archive piped to tar to construct a subdirectory whose name
+# is tcpdump-{release}, containing all the checked-in source files,
+# and then run autoreconf in that directory to generate the configure
+# script and other files from that source. Then remove autom4te.cache,
+# construct the release tarball from that subdirectory, and remove
+# the subdirectory.
+#
+# The --format=tar is to force git archive to write a non-compressed
+# archive, in case the platform's tar command doesn't have built-in
+# decompression.
+#
+# The ^{tree} is there to force git archive not to write out the
+# "helpful" global extended pax header with a commit ID, as not all
+# versions of tar can handle that (Solaris tar can't, for example).
+# (It turns HEAD, or a tag, both of which are apparently "tree-ish"es,
+# into a tree; apparently, unlike HEAD, or a tag, which have a commit
+# ID associated with them, the tree associated with them doesn't have
+# a commit ID, so no commit ID is available to write, and thus
+# git archive doesn't write one.)
+#
releasetar:
- @name=$(PROG)-`cat VERSION` ; \
- mkdir $$name; \
- tar cf - $(CSRC) $(HDR) $(LIBNETDISSECT_SRC) $(EXTRA_DIST) $(TEST_DIST) | (cd $$name; tar xf -); \
- tar -c -z -f $$name.tar.gz $$name; \
- rm -rf $$name
+ @TAG=$(PROG)-`cat VERSION` && \
+ if [ ! -d .git ]; then echo 'Not in a git clone, stop.'; exit 1; fi && \
+ TMPTESTFILE=`mktemp -t tmptestfile_XXXXXXXX` && \
+ rm -f "$$TMPTESTFILE" && \
+ AUTORECONF_DIR=`dirname "$$TMPTESTFILE"`/"$(PROG)"_build_autoreconf_$$$$ && \
+ DIR=`pwd` && \
+ rm -rf "$$AUTORECONF_DIR" && \
+ mkdir "$$AUTORECONF_DIR" && \
+ cd "$$AUTORECONF_DIR" && \
+ if git -C "$$DIR" show-ref --tags --quiet --verify -- "refs/tags/$$TAG"; then \
+ (git -C "$$DIR" archive --format=tar --prefix="$$TAG"/ "$$TAG^{tree}" $(RELEASE_FILES) | \
+ tar xf -) && \
+ echo "Archive build from tag $$TAG."; \
+ else \
+ (git -C "$$DIR" archive --format=tar --prefix="$$TAG"/ "HEAD^{tree}" $(RELEASE_FILES) | \
+ tar xf -) && \
+ echo "No $$TAG tag. Archive build from HEAD."; \
+ fi && \
+ (cd "$$TAG" && "$${AUTORECONF:-autoreconf}" && rm -rf autom4te.cache) && \
+ tar cf "$$DIR/$$TAG".tar "$$TAG" && \
+ rm -f "$$DIR/$$TAG".tar.gz && \
+ gzip --best "$$DIR/$$TAG".tar && \
+ cd "$$DIR" && \
+ rm -rf "$$AUTORECONF_DIR"
+
+releasecheck: releasetar
+ @TAG=$(PROG)-`cat VERSION` && \
+ INSTALL_DIR=/tmp/install_"$$TAG"_$$$$ && \
+ DIR=`pwd` && \
+ cd /tmp && \
+ rm -rf "$$TAG" && \
+ rm -rf "$$INSTALL_DIR" && \
+ tar xf "$$DIR"/"$$TAG".tar.gz && \
+ cd "$$TAG" && \
+ echo "[$@] $$ ./configure --enable-smb --quiet --prefix=$$INSTALL_DIR" && \
+ ./configure --enable-smb --quiet --prefix="$$INSTALL_DIR" && \
+ echo '[$@] $$ make -s all check' && \
+ make -s all check >/dev/null && \
+ echo '[$@] $$ make -s install' && \
+ make -s install && \
+ cd .. && \
+ rm -rf "$$TAG" && \
+ rm -rf "$$INSTALL_DIR" && \
+ tar xf "$$DIR"/"$$TAG".tar.gz && \
+ cd "$$TAG" && \
+ mkdir build && \
+ cd build && \
+ echo '[$@] $$ cmake -DENABLE_SMB=yes [...] ..' && \
+ cmake -DENABLE_SMB=yes \
+ -DCMAKE_INSTALL_PREFIX="$$INSTALL_DIR" \
+ -DCMAKE_MESSAGE_LOG_LEVEL=NOTICE \
+ -DCMAKE_RULE_MESSAGES=OFF \
+ -DCMAKE_INSTALL_MESSAGE=NEVER \
+ .. && \
+ echo '[$@] $$ make -s all check' && \
+ make -s all check >/dev/null && \
+ echo '[$@] $$ make -s install' && \
+ make -s install && \
+ cd ../.. && \
+ rm -rf "$$TAG" && \
+ rm -rf "$$INSTALL_DIR" && \
+ echo '[$@] Done.'
+
+whitespacecheck:
+ @# trailing space(s)?
+ @if git grep -I -n ' $$' $$(git ls-files|grep -v '^tests/'); then \
+ echo 'Error: Trailing space(s).'; \
+ exit 1; \
+ fi
+ @# trailing tab(s)?
+ @# install-sh has a tab at the end of one line
+ @if git grep -I -n ' $$' $$(git ls-files|grep -vE '^(tests/|install-sh$$)'); then \
+ echo 'Error: Trailing tabs(s).'; \
+ exit 1; \
+ fi
+ @# space(s) before tab(s)?
+ @if git grep -I -n '[ ][ ]' $$(git ls-files|grep -v '^tests/'); then \
+ echo 'Error: space(s) before tab(s).'; \
+ exit 1; \
+ fi
testlist:
echo $(TEST_DIST)
-depend: $(GENSRC)
+depend:
$(MKDEP) -c "$(CC)" -m "$(DEPENDENCY_CFLAG)" -s "$(srcdir)" $(DEFS) $(INCLS) $(SRC) $(LIBNETDISSECT_SRC)
+
+shellcheck:
+ shellcheck -f gcc -e SC2006 build.sh build_matrix.sh build_common.sh
projects / tcpdump / blobdiff