"Reserved", /* 0 */
"Unspecified reason", /* 1 */
"Previous authentication no longer valid", /* 2 */
- "Deauthenticated because sending station is leaving (or has left) "
+ "Deauthenticated because sending STA is leaving (or has left) "
"IBSS or ESS", /* 3 */
"Disassociated due to inactivity", /* 4 */
"Disassociated because AP is unable to handle all currently "
- " associated stations", /* 5 */
- "Class 2 frame received from nonauthenticated station", /* 6 */
- "Class 3 frame received from nonassociated station", /* 7 */
- "Disassociated because sending station is leaving "
+ " associated STAs", /* 5 */
+ "Class 2 frame received from nonauthenticated STA", /* 6 */
+ "Class 3 frame received from nonassociated STA", /* 7 */
+ "Disassociated because sending STA is leaving "
"(or has left) BSS", /* 8 */
- "Station requesting (re)association is not authenticated with "
- "responding station", /* 9 */
+ "STA requesting (re)association is not authenticated with "
+ "responding STA", /* 9 */
"Disassociated because the information in the Power Capability "
"element is unacceptable", /* 10 */
- "Disassociated because the information in the SupportedChannels "
+ "Disassociated because the information in the Supported Channels "
"element is unacceptable", /* 11 */
- "Invalid Information Element", /* 12 */
- "Reserved", /* 13 */
- "Michael MIC failure", /* 14 */
+ "Disassociated due to BSS transition management", /* 12 */
+ "Invalid element, i.e., an element defined in this standard for "
+ "which the content does not meet the specifications "
+ "in Clause 9", /* 13 */
+ "Message integrity code (MIC) failure", /* 14 */
"4-Way Handshake timeout", /* 15 */
- "Group key update timeout", /* 16 */
+ "Group key handshake timeout", /* 16 */
"Information element in 4-Way Handshake different from (Re)Association"
- "Request/Probe Response/Beacon", /* 17 */
- "Group Cipher is not valid", /* 18 */
- "AKMP is not valid", /* 20 */
- "Unsupported RSN IE version", /* 21 */
- "Invalid RSN IE Capabilities", /* 22 */
- "IEEE 802.1X Authentication failed", /* 23 */
- "Cipher suite is rejected per security policy", /* 24 */
- "Reserved", /* 25 */
- "Reserved", /* 26 */
- "Reserved", /* 27 */
- "Reserved", /* 28 */
- "Reserved", /* 29 */
- "Reserved", /* 30 */
+ "Request/Probe Response/Beacon frame", /* 17 */
+ "Invalid group cipher", /* 18 */
+ "Invalid pairwise cipher", /* 19 */
+ "Invalid AKMP", /* 20 */
+ "Unsupported RSNE version", /* 21 */
+ "Invalid RSNE capabilities", /* 22 */
+ "IEEE 802.1X authentication failed", /* 23 */
+ "Cipher suite rejected because of the security policy", /* 24 */
+ "TDLS direct-link teardown due to TDLS peer STA "
+ "unreachable via the TDLS direct link", /* 25 */
+ "TDLS direct-link teardown for unspecified reason", /* 26 */
+ "Disassociated because session terminated by SSP request",/* 27 */
+ "Disassociated because of lack of SSP roaming agreement",/* 28 */
+ "Requested service rejected because of SSP cipher suite or "
+ "AKM requirement", /* 29 */
+ "Requested service not authorized in this location", /* 30 */
"TS deleted because QoS AP lacks sufficient bandwidth for this "
"QoS STA due to a change in BSS service characteristics or "
"operational mode (e.g. an HT BSS change from 40 MHz channel "
"Disassociated because QoS AP lacks sufficient bandwidth for this "
"QoS STA", /* 33 */
"Disassociated because of excessive number of frames that need to be "
- "acknowledged, but are not acknowledged for AP transmissions "
+ "acknowledged, but are not acknowledged due to AP transmissions "
"and/or poor channel conditions", /* 34 */
"Disassociated because STA is transmitting outside the limits "
"of its TXOPs", /* 35 */
"Reserved", /* 43 */
"Reserved", /* 44 */
"Peer STA does not support the requested cipher suite", /* 45 */
- "Association denied due to requesting STA not supporting HT "
- "features", /* 46 */
+ "In a DLS Teardown frame: The teardown was initiated by the "
+ "DLS peer. In a Disassociation frame: Disassociated because "
+ "authorized access limit reached", /* 46 */
+ "In a DLS Teardown frame: The teardown was initiated by the "
+ "AP. In a Disassociation frame: Disassociated due to external "
+ "service requirements", /* 47 */
+ "Invalid FT Action frame count", /* 48 */
+ "Invalid pairwise master key identifier (PMKID)", /* 49 */
+ "Invalid MDE", /* 50 */
+ "Invalid FTE", /* 51 */
+ "Mesh peering canceled for unknown reasons", /* 52 */
+ "The mesh STA has reached the supported maximum number of "
+ "peer mesh STAs", /* 53 */
+ "The received information violates the Mesh Configuration "
+ "policy configured in the mesh STA profile", /* 54 */
+ "The mesh STA has received a Mesh Peering Close frame "
+ "requesting to close the mesh peering", /* 55 */
+ "The mesh STA has resent dot11MeshMaxRetries Mesh "
+ "Peering Open frames, without receiving a Mesh Peering "
+ "Confirm frame" /* 56 */
+ "The confirmTimer for the mesh peering instance times out", /* 57 */
+ "The mesh STA fails to unwrap the GTK or the values in the "
+ "wrapped contents do not match", /* 58 */
+ "The mesh STA receives inconsistent information about the "
+ "mesh parameters between mesh peering Management frames", /* 59 */
+ "The mesh STA fails the authenticated mesh peering exchange "
+ "because due to failure in selecting either the pairwise "
+ "ciphersuite or group ciphersuite", /* 60 */
+ "The mesh STA does not have proxy information for this "
+ "external destination", /* 61 */
+ "The mesh STA does not have forwarding information for this "
+ "destination", /* 62 */
+ "The mesh STA determines that the link to the next hop of an "
+ "active path in its forwarding information is no longer "
+ "usable", /* 63 */
+ "The Deauthentication frame was sent because the MAC "
+ "address of the STA already exists in the mesh BSS", /* 64 */
+ "The mesh STA performs channel switch to meet regulatory "
+ "requirements", /* 65 */
+ "The mesh STA performs channel switching with unspecified "
+ "reason", /* 66 */
};
#define NUM_REASONS (sizeof(reason_text) / sizeof(reason_text[0]))
projects / tcpdump / blobdiff