\fIsecret\fP is the ASCII text for ESP secret key.
If preceded by 0x, then a hex value will be read.
.IP
-The option assumes RFC2406 ESP, not RFC1827 ESP.
+The option assumes RFC 2406 ESP, not RFC 1827 ESP.
The option is only for debugging purposes, and
the use of this option with a true `secret' key is discouraged.
By presenting IPsec secret key onto command line
packets are assumed to contain an LLC packet.
.LP
\fI(N.B.: The following description assumes familiarity with
-the SLIP compression algorithm described in RFC-1144.)\fP
+the SLIP compression algorithm described in RFC 1144.)\fP
.LP
On SLIP links, a direction indicator (``I'' for inbound, ``O'' for outbound),
packet type, and compression information are printed out.
TCP Packets
.LP
\fI(N.B.:The following description assumes familiarity with
-the TCP protocol described in RFC-793.
+the TCP protocol described in RFC 793.
If you are not familiar
with the protocol, this description will not
be of much use to you.)\fP
.LP
Some UDP services are recognized (from the source or destination
port number) and the higher level protocol information printed.
-In particular, Domain Name service requests (RFC-1034/1035) and Sun
-RPC calls (RFC-1050) to NFS.
+In particular, Domain Name service requests (RFC 1034/1035) and Sun
+RPC calls (RFC 1050) to NFS.
.HD
TCP or UDP Name Server Requests
.LP
\fI(N.B.:The following description assumes familiarity with
-the Domain Service protocol described in RFC-1035.
+the Domain Service protocol described in RFC 1035.
If you are not familiar
with the protocol, the following description will appear to be written
in Greek.)\fP