* WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
-#ifndef lint
-static const char rcsid[] _U_ =
- "@(#) $Header: /tcpdump/master/tcpdump/print-ether.c,v 1.106 2008-02-06 10:47:53 guy Exp $ (LBL)";
-#endif
#define NETDISSECT_REWORKED
#ifdef HAVE_CONFIG_H
#include <tcpdump-stdinc.h>
#include <stdio.h>
-#include <pcap.h>
#include "interface.h"
#include "extract.h"
#include "addrtoname.h"
#include "ethertype.h"
-
#include "ether.h"
-const struct tok ethertype_values[] = {
+const struct tok ethertype_values[] = {
{ ETHERTYPE_IP, "IPv4" },
{ ETHERTYPE_MPLS, "MPLS unicast" },
{ ETHERTYPE_MPLS_MULTI, "MPLS multicast" },
{ ETHERTYPE_PPPOES, "PPPoE S" },
{ ETHERTYPE_EAPOL, "EAPOL" },
{ ETHERTYPE_RRCP, "RRCP" },
+ { ETHERTYPE_MS_NLB_HB, "MS NLB heartbeat" },
{ ETHERTYPE_JUMBO, "Jumbo" },
{ ETHERTYPE_LOOPBACK, "Loopback" },
{ ETHERTYPE_ISO, "OSI" },
{ ETHERTYPE_CFM_OLD, "CFM (old)" },
{ ETHERTYPE_CFM, "CFM" },
{ ETHERTYPE_LLDP, "LLDP" },
+ { ETHERTYPE_TIPC, "TIPC"},
+ { ETHERTYPE_GEONET_OLD, "GeoNet (old)"},
+ { ETHERTYPE_GEONET, "GeoNet"},
+ { ETHERTYPE_CALM_FAST, "CALM FAST"},
{ 0, NULL}
};
if (!ndo->ndo_qflag) {
if (ether_type <= ETHERMTU)
(void)ND_PRINT((ndo, ", 802.3"));
- else
+ else
(void)ND_PRINT((ndo, ", ethertype %s (0x%04x)",
tok2str(ethertype_values,"Unknown", ether_type),
ether_type));
} else {
if (ether_type <= ETHERMTU)
(void)ND_PRINT((ndo, ", 802.3"));
- else
+ else
(void)ND_PRINT((ndo, ", %s", tok2str(ethertype_values,"Unknown Ethertype (0x%04x)", ether_type)));
}
return (ETHER_HDRLEN);
}
+/*
+ * This is the top level routine of the printer. 'p' points
+ * to the ether header of the packet, 'h->ts' is the timestamp,
+ * 'h->len' is the length of the packet off the wire, and 'h->caplen'
+ * is the number of bytes actually captured.
+ *
+ * This is for DLT_NETANALYZER, which has a 4-byte pseudo-header
+ * before the Ethernet header.
+ */
+u_int
+netanalyzer_if_print(netdissect_options *ndo, const struct pcap_pkthdr *h,
+ const u_char *p)
+{
+ /*
+ * Fail if we don't have enough data for the Hilscher pseudo-header.
+ */
+ if (h->len < 4 || h->caplen < 4) {
+ printf("[|netanalyzer]");
+ return (h->caplen);
+ }
+
+ /* Skip the pseudo-header. */
+ ether_print(ndo, p + 4, h->len - 4, h->caplen - 4, NULL, NULL);
+
+ return (4 + ETHER_HDRLEN);
+}
+
+/*
+ * This is the top level routine of the printer. 'p' points
+ * to the ether header of the packet, 'h->ts' is the timestamp,
+ * 'h->len' is the length of the packet off the wire, and 'h->caplen'
+ * is the number of bytes actually captured.
+ *
+ * This is for DLT_NETANALYZER_TRANSPARENT, which has a 4-byte
+ * pseudo-header, a 7-byte Ethernet preamble, and a 1-byte Ethernet SOF
+ * before the Ethernet header.
+ */
+u_int
+netanalyzer_transparent_if_print(netdissect_options *ndo,
+ const struct pcap_pkthdr *h,
+ const u_char *p)
+{
+ /*
+ * Fail if we don't have enough data for the Hilscher pseudo-header,
+ * preamble, and SOF.
+ */
+ if (h->len < 12 || h->caplen < 12) {
+ printf("[|netanalyzer-transparent]");
+ return (h->caplen);
+ }
+
+ /* Skip the pseudo-header, preamble, and SOF. */
+ ether_print(ndo, p + 12, h->len - 12, h->caplen - 12, NULL, NULL);
+
+ return (12 + ETHER_HDRLEN);
+}
+
/*
* Prints the packet payload, given an Ethernet type code for the payload's
* protocol.
return (1);
case ETHERTYPE_LOOPBACK:
+ loopback_print(ndo, p, length);
return (1);
case ETHERTYPE_MPLS:
mpls_print(/*ndo,*/p, length);
return (1);
+ case ETHERTYPE_TIPC:
+ tipc_print(ndo, p, length, caplen);
+ return (1);
+
+ case ETHERTYPE_MS_NLB_HB:
+ msnlb_print(ndo, p);
+ return (1);
+
+ case ETHERTYPE_GEONET_OLD:
+ case ETHERTYPE_GEONET:
+ geonet_print(ndo, p-14, p, length);
+ return (1);
+
+ case ETHERTYPE_CALM_FAST:
+ calm_fast_print(ndo, p-14, p, length);
+ return (1);
+
case ETHERTYPE_LAT:
case ETHERTYPE_SCA:
case ETHERTYPE_MOPRC: