]> The Tcpdump Group git mirrors - tcpdump/blob - print-atm.c
Bring in KAME IPv6 tcpdump. replaces esp/ah/isakmp decoder.
[tcpdump] / print-atm.c
1 /*
2 * Copyright (c) 1994, 1995, 1996, 1997
3 * The Regents of the University of California. All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that: (1) source code distributions
7 * retain the above copyright notice and this paragraph in its entirety, (2)
8 * distributions including binary code include the above copyright notice and
9 * this paragraph in its entirety in the documentation or other materials
10 * provided with the distribution, and (3) all advertising materials mentioning
11 * features or use of this software display the following acknowledgement:
12 * ``This product includes software developed by the University of California,
13 * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
14 * the University nor the names of its contributors may be used to endorse
15 * or promote products derived from this software without specific prior
16 * written permission.
17 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
18 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
19 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
20 */
21 #ifndef lint
22 static const char rcsid[] =
23 "@(#) $Header: /tcpdump/master/tcpdump/print-atm.c,v 1.11 1999-10-30 05:11:11 itojun Exp $ (LBL)";
24 #endif
25
26 #include <sys/param.h>
27 #include <sys/time.h>
28 #include <sys/socket.h>
29
30 #if __STDC__
31 struct mbuf;
32 struct rtentry;
33 #endif
34 #include <net/if.h>
35
36 #include <netinet/in.h>
37 #include <netinet/if_ether.h>
38 #include <netinet/in_systm.h>
39 #include <netinet/ip.h>
40 #include <netinet/ip_var.h>
41 #include <netinet/udp.h>
42 #include <netinet/udp_var.h>
43 #include <netinet/tcp.h>
44
45 #include <stdio.h>
46 #include <pcap.h>
47
48 #include "interface.h"
49 #include "addrtoname.h"
50 #include "ethertype.h"
51
52 /*
53 * This is the top level routine of the printer. 'p' is the points
54 * to the LLC/SNAP header of the packet, 'tvp' is the timestamp,
55 * 'length' is the length of the packet off the wire, and 'caplen'
56 * is the number of bytes actually captured.
57 */
58 void
59 atm_if_print(u_char *user, const struct pcap_pkthdr *h, const u_char *p)
60 {
61 u_int caplen = h->caplen;
62 u_int length = h->len;
63 u_short ethertype;
64
65 ts_print(&h->ts);
66
67 if (caplen < 8) {
68 printf("[|atm]");
69 goto out;
70 }
71 if (p[0] != 0xaa || p[1] != 0xaa || p[2] != 0x03) {
72 /*XXX assume 802.6 MAC header from fore driver */
73 if (eflag)
74 printf("%04x%04x %04x%04x ",
75 p[0] << 24 | p[1] << 16 | p[2] << 8 | p[3],
76 p[4] << 24 | p[5] << 16 | p[6] << 8 | p[7],
77 p[8] << 24 | p[9] << 16 | p[10] << 8 | p[11],
78 p[12] << 24 | p[13] << 16 | p[14] << 8 | p[15]);
79 p += 20;
80 length -= 20;
81 caplen -= 20;
82 }
83 ethertype = p[6] << 8 | p[7];
84 if (eflag)
85 printf("%02x %02x %02x %02x-%02x-%02x %04x: ",
86 p[0], p[1], p[2], /* dsap/ssap/ctrl */
87 p[3], p[4], p[5], /* manufacturer's code */
88 ethertype);
89
90 /*
91 * Some printers want to get back at the ethernet addresses,
92 * and/or check that they're not walking off the end of the packet.
93 * Rather than pass them all the way down, we set these globals.
94 */
95 packetp = p;
96 snapend = p + caplen;
97
98 length -= 8;
99 caplen -= 8;
100 p += 8;
101
102 switch (ethertype) {
103
104 case ETHERTYPE_IP:
105 ip_print(p, length);
106 break;
107
108 #ifdef INET6
109 case ETHERTYPE_IPV6:
110 ip6_print(p, length);
111 break;
112 #endif /*INET6*/
113
114 /*XXX this probably isn't right */
115 case ETHERTYPE_ARP:
116 case ETHERTYPE_REVARP:
117 arp_print(p, length, caplen);
118 break;
119 #ifdef notyet
120 case ETHERTYPE_DN:
121 decnet_print(p, length, caplen);
122 break;
123
124 case ETHERTYPE_ATALK:
125 if (vflag)
126 fputs("et1 ", stdout);
127 atalk_print(p, length);
128 break;
129
130 case ETHERTYPE_AARP:
131 aarp_print(p, length);
132 break;
133
134 case ETHERTYPE_LAT:
135 case ETHERTYPE_MOPRC:
136 case ETHERTYPE_MOPDL:
137 /* default_print for now */
138 #endif
139 default:
140 /* ether_type not known, print raw packet */
141 if (!eflag)
142 printf("%02x %02x %02x %02x-%02x-%02x %04x: ",
143 p[0], p[1], p[2], /* dsap/ssap/ctrl */
144 p[3], p[4], p[5], /* manufacturer's code */
145 ethertype);
146 if (!xflag && !qflag)
147 default_print(p, caplen);
148 }
149 if (xflag)
150 default_print(p, caplen);
151 out:
152 putchar('\n');
153 }