Avoid some typo reports in comments

[tcpdump] / CHANGES

DayOfTheWeek, Month DD, YYYY / The Tcpdump Group
  Summary for 5.0.0 tcpdump release (so far!)
    Add protocol decoding for:
      ERSPAN: Add support
    Refine protocol decoding for:
      BFD: Add support for S-BFD and spell LAG in uppercase.
      BGP: Parse BGP extended message support capability
      BGP: Deprecate DPA, ADVERTISER and RCID_PATH path attributes
      BGP: Print Enhanced route refresh capability
      BGP: Print enhanced route refresh message subtype
      BGP: Parse rfc9072 (Extended Optional Parameters Length for BGP OPEN Message)
      BGP: Add support for BFD cease subcode
      BGP: Add support for Hard Reset notification and GR N flag
      BGP: Handle ORF in Route-Refresh messages
      BGP: add dissector for BGPsec capability and path
      BGP: Add Origin Validation State extended community
      BGP: Add support for BGP Role capability and OTC attribute
      BGP: Fix most printing code to print directly rather than filling
        in a fixed-size buffer to be printed later
      ICMP: add dissector for ICMP Interface Identification Object
      ICMP: print RFC8335 PROBE extended echo/reply messages.
      IEEE 802.11: include the Mesh ID field while printing management
        frames.
      NetFlow: Use tcp_flag_values[] for TCP flags.
      NTP: Check that the entire extension field is in the capture even
        if it isn't printed
      NTP: Print kiss codes relevant for NTP debugging.
      NTP: Use GET_U_1() to replace a direct dereference.
      MPTCP: parse MPC data_len field, print flags from MP_CAPABLE option.
      OSPF: Fix printing of Traffic Engineering Link TLVs to correctly
        advance the packet data pointer
      OSPF: Print more truncation indications
      OSPF: Add more length checks
      SLL2: Translate interface indices to names on Linux only.
      TCP: Add support for the AE (AccECN) flag.
    User interface:
      Add optional unit suffix on -C file size.
      Add --print-sampling to print every Nth packet instead of all.
      Add --lengths option to print the captured and original packet lengths.
    Source code:
      Drop support for building with versions of libpcap that don't
        support all the libpcap 1.0 APIs.
      Use %zu when printing a sizeof to squelch compiler warnings
      Remove unused missing/snprintf.c.
      Remove unused missing/strdup.c.
      (FIXME: somebody please wrap the line below just before the release)
      AODV, AppleTalk, BOOTP, CHDLC, DCCP, EAP, EGP, EIGRP, ForCES, Geneve, GRE, ICMP, Juniper, L2TP, mobile, MSDP, NetFlow, NFLOG, NTP, OLSR, pflog, PGM, RADIUS, RIP, RSVP, SCTP, SNMP, TCP, UDP, vsock: Modernize packet parsing style
      DCCP, EGP: Replace custom code with tok2str()
      UDP: Clean up address and port printing.
      AppleTalk: Declutter appletalk.h.
      IEEE 802.11: Simplify handle_action().
      Provide GET_ macros for 4-byte and 8-byte floating-point numbers
        and use them rather than custom code
      Disregard setlinebuf(3), always use setvbuf(3).
      Change Sun RPC code licence to BSD-3-Clause.
    Building and testing:
      Autoconf: Remove detection of early IPv6 stacks.
      Detect OS IPv6 support using AF_INET6 only.
      Remove all remaining support for BSD/OS, IRIX, {OSF/1, Digital Unix,
        Tru64 Unix}, SINIX and Ultrix.
      Fix compiling on GNU/Hurd.
      Make illumos build warning-free.
      Makefile.in: Update the .c.o build rule (Remove hacks for old SunOS 4).
      Autoconf: fix buggy tests for ether_ntohost().
      CMake: Skip snprintf(3) tests when cross-compiling.
      Makefile.in: Do not install a version-suffixed tcpdump binary if the
        .devel file does not exists.
      tests: On HP-UX use "diff -c" by default.
      autogen.sh: Allow to configure Autoconf warnings.
      autogen.sh: Delete all trailing blank lines at end of configure.
    Documentation:
      man: Clarify the "any" pseudo-interface further.

DayOfTheWeek, Month DD, YYYY / The Tcpdump Group
  Summary for 4.99.6 tcpdump release (so far!)
    Refine protocol decoding for:
      IPv6: Add a missing comma and remove a colon in the output.
      TCP: Note if the Urgent Pointer is non-zero while URG flag not set,
           if the verbose level is > 1 (option -vv and more).
      TCP: Note if the Acknowledgment Number is non-zero while ACK flag not set,
           if the verbose level is > 1 (option -vv and more).
    Source code:
      Fix '-tt' option printing when time > 2106-02-07T06:28:15Z.

Friday, August 30, 2024 / The Tcpdump Group
  Summary for 4.99.5 tcpdump release
    Refine protocol decoding for:
      Arista: Use the test .pcap file from pull request #955 (HwInfo).
      BGP: Fix an undefined behavior when it tries to parse a too-short packet.
      CARP: Print the protocol name before any GET_().
      CDP: only hex-dump unknown TLVs in verbose mode.
      DHCP: parse the SZTP redirect tag.
      DHCPv6: client-id/server-id DUID type 2 correction; parse the user class,
        boot file URL, and SZTP redirect options; add DUID-UUID printing
        (RFC6355).
      DNS: Detect and correctly handle too-short URI RRs.
      EAP: Assign ndo_protocol in the eap_print() function.
      ESP: Don't use EVP_add_cipher_alias() (fixes building on OpenBSD 7.5).
      Frame Relay (Multilink): Fix the Timestamp Information Element printing.
      ICMPv6: Fix printing the Home Agent Address Discovery Reply Message.
      IEEE 802.11: no need for an element ID in the structures for IEs, make
        the length in the IE structures a u_int, include the "TA" field while
        printing Block Ack Control frame.
      IP: Enable TSO (TCP Segmentation Offload) support; fix printing invalid
        cases as invalid, not truncated; use ND_ICHECKMSG_ZU() to test the
        header length.
      IPv6: Fix printing invalid cases as invalid, not truncated; use
        ND_ICHECKMSG_U() to print an invalid version.
      IPv6: Fix invalid 32-bit versus 64-bit printouts of fragment headers.
      ISAKMP: Fix printing Delete payload SPI when size is zero.
      Kerberos: Print the protocol name, remove a redundant bounds check.
      lwres: Fix an undefined behavior in pointer arithmetic.
      OpenFlow 1.0: Fix indentation of PORT_MOD, improve handling of
          some lengths, and fix handling of snapend.
      TCP: Test ports < 1024 in port order to select the printer.
      UDP: Move source port equal BCM_LI_PORT to bottom of long if else chain.
      UDP: Test ports < 1024 in port order to select the printer.
      LDP: Add missing fields of the Common Session Parameters TLV and fix the
        offset for the A&D bits.
      NFLOG: Use correct AF code points on all OSes.
      NFS: Avoid printing non-ASCII characters.
      OSPF: Pad TLVs in LS_OPAQUE_TYPE_RI to multiples of 4 bytes.
      OSPF: Update LS-Ack printing not to run off the end of the packet.
      OSPF6: Fix an undefined behavior.
      pflog: use nd_ types in struct pfloghdr.
      PPP: Check if there is some data to hexdump.
      PPP: Remove an extra colon before LCP Callback Operation.
      Use the buffer stack for de-escaping PPP; fixes CVE-2024-2397;
        Note: This problem does not affect any tcpdump release.
      PTP: Fix spelling of type SIGNALING, Parse major and minor version
        correctly, Print majorSdoId field instead of just the first bit.
      RIP: Make a couple trivial protocol updates.
      RPKI-Router: Refine length and bounds checks.
      RX: Use the "%Y-%m-%d" date format.
      smbutil.c: Use the "%Y-%m-%d" date format.
      SNMP: Fix two undefined behaviors.
      Text protocols: Fix printing truncation if it is not the case.
      ZEP: Use the "%Y-%m-%d" date format.
      ZMTP: Replace custom code with bittok2str().
    User interface:
      Print the supported time stamp types (-J) to stdout instead of stderr.
      Print the list of data link types (-L) to stdout instead of stderr.
      Use symmetrical quotation characters in error messages.
      Update --version option to print 32/64-bit build and time_t size.
      Improve error messages for invalid interface indexes specified
        with -i.
      Support "3des" as an alias for "des_ede3_cbc" even if the crypto
        library doesn't support adding aliases.
    Source code:
      tcpdump: Fix a memory leak.
      child_cleanup: reap as many child processes as possible.
      Ignore failures when setting the default "any" device DLL to LINUX_SLL2.
      Fix for backends which doesn't support capsicum.
      Update ND_BYTES_BETWEEN() macro for better accuracy.
      Update ND_BYTES_AVAILABLE_AFTER() macro for better accuracy.
      Introduce new ND_ICHECK*() macros to deduplicate more code.
      Skip privilege dropping when using -Z root on --with-user builds.
      Add a nd_printjn() function.
      Make nd_trunc_longjmp() not static inline.
      Include <time.h> from netdissect.h.
      Remove init_crc10_table() and the entourage.
      Initialize tzcode early.
      Capsicum support: Fix a 'not defined' macro error.
      Update the "Error converting time" tests for packet times.
      Fix warnings when building for 32-bit and defining _TIME_BITS=64.
      Free interface list just before exiting where it wasn't being
        freed.
    Building and testing:
      Add a configure option to help debugging (--enable-instrument-functions).
      At build time require a proof of suitable snprintf(3) implementation in
        libc (and document Solaris 9 as unsupported because of that).
      Makefile.in: Add two "touch .devel" commands in the releasecheck target.
      Autoconf: Get --with-user and --with-chroot right.
      Autoconf: Fix --static-pcap-only test on Solaris 10.
      Autoconf: Add some warning flags for clang 13 or newer.
      Autoconf: Update config.{guess,sub}, timestamps 2024-01-01.
      Autoconf: Add autogen.sh, remove configure and config.h.in and put
        these generated files in the release tarball.
      Autoconf: Update the install-sh script to the 2020-11-14.01 version.
      configure: Apply autoupdate 2.69.
      CMake: improve the comment before project(tcpdump C).
      Do not require vsnprintf().
      tests: Use the -tttt option, by default, for the tests.
      Autoconf, CMake: Get the size of a void * and a time_t.
      Fix propagation of cc_werr_cflags() output.
      Makefile.in: Fix the depend target.
      mkdep: Exit with a non-zero status if a command fails.
      Autoconf: use V_INCLS to update the list of include search paths.
      Autoconf: don't put anything before -I and -L flags for local libpcap.
      Autoconf, CMake: work around an Xcode 15+ issue.
      Autoconf, CMake: use pkg-config and Homebrew when looking for
        libcrypto.
      Fix Sun C invocation from CMake.
      mkdep: Use TMPDIR if it is set and not null.
      Add initial support for building with TinyCC.
      Makefile.in: Use the variable MAKE instead of the make command.
      Makefile.in: Add instrumentation configuration in releasecheck target.
      Make various improvements to the TESTrun script.
      Untangle detection of pcap_findalldevs().
      Autoconf: don't use egrep, use $EGREP.
      Autoconf: check for gethostbyaddr(), not gethostbyname().
      Autoconf, CMake: search for gethostbyaddr() in libnetwork.
      Make illumos build warning-free.
    Documentation:
      Fixed errors in doc/README.Win32.md and renamed it to README.windows.md.
      Make various improvements to the man page.
      Add initial README file for Haiku.
      Make various improvements to CONTRIBUTING.md.

Friday, April 7, 2023 / The Tcpdump Group
  Summary for 4.99.4 tcpdump release
    Source code:
      Fix spaces before tabs in indentation.
    Updated printers:
      LSP ping: Fix "Unused value" warnings from Coverity.
      CVE-2023-1801: Fix an out-of-bounds write in the SMB printer.
      DNS: sync resource types with IANA.
      ICMPv6: Update the output to show a RPL DAO field name.
      Geneve: Fix the Geneve UDP port test.
    Building and testing:
      Require at least autoconf 2.69.
      Don't check for strftime(), as it's in C90 and beyond.
      Update config.{guess,sub}, timestamps 2023-01-01,2023-01-21.
    Documentation:
      man: Document TCP flag names better.

Thursday, January 12, 2023 / The Tcpdump Group
  Summary for 4.99.3 tcpdump release
    Updated printers:
      PTP: Use the proper values for the control field and print un-allocated
        values for the message field as "Reserved" instead of "none".
    Source code:
      smbutil.c: Replace obsolete function call (asctime)
    Building and testing:
      cmake: Update the minimum required version to 2.8.12 (except Windows).
      CI: Introduce and use TCPDUMP_CMAKE_TAINTED.
      Makefile.in: Add the releasecheck target.
      Makefile.in: Add "make -s install" in the releasecheck target.
      Cirrus CI: Run the "make releasecheck" command in the Linux task.
      Makefile.in: Add the whitespacecheck target.
      Cirrus CI: Run the "make whitespacecheck" command in the Linux task.
      Address all shellcheck warnings in update-test.sh.
      Makefile.in: Get rid of a remain of gnuc.h.
    Documentation:
      Reformat the installation notes (INSTALL.txt) in Markdown.
      Convert CONTRIBUTING to Markdown.
      CONTRIBUTING.md: Document the use of "protocol: " in a commit summary.
      Add a README file for NetBSD.
      Fix CMake build to set man page section numbers in tcpdump.1

Saturday, December 31, 2022 / The Tcpdump Group
  Summary for 4.99.2 tcpdump release
    Updated printers:
      BGP: Update cease notification decoding to RFC 9003.
      BGP: decode BGP link-bandwidth extended community properly.
      BGP: Fix parsing the AIGP attribute
      BGP: make sure the path attributes don't go past the end of the packet.
      BGP: Shutdown message can be up to 255 bytes length according to rfc9003
      DSA: correctly determine VID.
      EAP: fix some length checks and output issues.
      802.11: Fix the misleading comment regarding "From DS", "To DS" Frame
        Control Flags.
      802.11: Fetch the CF and TIM IEs a field at a time.
      802.15.4, BGP, LISP: fix some length checks, compiler warnings,
        and undefined behavior warnings.
      PFLOG: handle LINKTYPE_PFLOG/DLT_PFLOG files from all OSes on all
        OSes.
      RRCP: support more Realtek protocols than just RRCP.
      MPLS: show the EXP field as TC, as per RFC 5462.
      ICMP: redo MPLS Extension code as general ICMP Extension code.
      VQP: Do not print unknown error codes twice.
      Juniper: Add some bounds checks.
      Juniper: Don't treat known DLT_ types as "Unknown".
      lwres: Fix a length check, update a variable type.
      EAP: Fix some undefined behaviors at runtime.
      Ethernet: Rework the length checks, add a length check.
      IPX: Add two length checks.
      Zephyr: Avoid printing non-ASCII characters.
      VRRP: Print the protocol name before any GET_().
      DCCP: Get rid of trailing commas in lists.
      Juniper: Report invalid packets as invalid, not truncated.
      IPv6: Remove an obsolete code in an always-false #if wrapper.
      ISAKMP: Use GET_U_1() to replace a direct dereference.
      RADIUS: Use GET_U_1() to replace a direct dereference.
      TCP: Fix an invalid check.
      RESP: Fix an invalid check.
      RESP: Remove an unnecessary test.
      Arista: Refine the output format and print HwInfo.
      sFlow: add support for IPv6 agent, add a length check.
      VRRP: add support for IPv6.
      OSPF: Update to match the Router Properties registry.
      OSPF: Remove two unnecessary dereferences.
      OSPF: Add support bit Nt RFC3101.
      OSPFv3: Remove two unnecessary dereferences.
      ICMPv6: Fix output for Router Renumbering messages.
      ICMPv6: Fix the Node Information flags.
      ICMPv6: Remove an unused macro and extra blank lines.
      ICMPv6: Add a length check in the rpl_dio_print() function.
      ICMPv6: Use GET_IP6ADDR_STRING() in the rpl_dio_print() function.
      IPv6: Add some checks for the Hop-by-Hop Options header
      IPv6: Add a check for the Jumbo Payload Hop-by-Hop option.
      NFS: Fix the format for printing an unsigned int
      PTP: fix printing of the correction fields
      PTP: Use ND_LCHECK_U for checking invalid length.
      WHOIS: Add its own printer source file and printer function
      MPTCP: print length before subtype inside MPTCP options
      ESP: Add a workaround to a "use-of-uninitialized-value".
      PPP: Add tests to avoid incorrectly re-entering ppp_hdlc().
      PPP: Don't process further if protocol is unknown (-e option).
      PPP: Change the pointer to packet data.
      ZEP: Add three length checks.
      Add some const qualifiers.
    Building and testing:
      Update config.guess and config.sub.
      Use AS_HELP_STRING macro instead of AC_HELP_STRING.
      Handle some Autoconf/make errors better.
      Fix an error when cross-compiling.
      Use "git archive" for the "make releasetar" process.
      Remove the release candidate rcX targets.
      Mend "make check" on Solaris 9 with Autoconf.
      Address assorted compiler warnings.
      Fix auto-enabling of Capsicum on FreeBSD with Autoconf.
      Treat "msys" as Windows for test exit statuses.
      Clean up some help messages in configure.
      Use unified diff by default.
      Remove awk code from mkdep.
      Fix configure test errors with Clang 15
      CMake: Prevent stripping of the RPATH on installation.
      AppVeyor CI: update Npcap site, update to 1.12 SDK.
      Cirrus CI: Use the same configuration as for the main branch.
      CI: Add back running tcpdump -J/-L and capture, now with Cirrus VMs.
      Remove four test files (They are now in the libpcap tests directory).
      On Solaris, for 64-bit builds, use the 64-bit pcap-config.
      Tell CMake not to check for a C++ compiler.
      CMake: Add a way to request -Werror and equivalents.
      configure: Special-case macOS /usr/bin/pcap-config as we do in CMake.
      configure: Use pcap-config --static-pcap-only if available.
      configure: Use ac_c_werror_flag to force unknown compiler flags to fail.
      configure: Use AC_COMPILE_IFELSE() and AC_LANG_SOURCE() for testing
        flags.
      Run the test that fails on OpenBSD only if we're not on OpenBSD.
    Source code:
      Fix some snapend-changing routines to protect against pointer
        underflow.
      Use __func__ from C99 in some function calls.
      Memory allocator: Update nd_add_alloc_list() to a static function.
      addrtoname.c: Fix two invalid tests.
      Use more S_SUCCESS and S_ERR_HOST_PROGRAM in main().
      Add some comments about "don't use GET_IP6ADDR_STRING()".
      Assign ndo->ndo_packetp in pretty_print_packet().
      Add ND_LCHECKMSG_U, ND_LCHECK_U, ND_LCHECKMSG_ZU and ND_LCHECK_ZU macros.
      Update tok2strbuf() to a static function.
      netdissect.h: Keep the link-layer dissectors names sorted.
      setsignal(): Set SA_RESTART on non-lethal signals (REQ_INFO, FLUSH_PCAP)
        to avoid corrupting binary pcap output.
      Use __builtin_unreachable().
      Fail if nd_push_buffer() or nd_push_snaplen() fails.
      Improve code style and fix many typos.
    Documentation:
      Some man page cleanups.
      Update the print interface for the packet count to stdout.
      Note that we require compilers to support at least some of C99.
      Update AIX and Solaris-related specifics.
      INSTALL.txt: Add doc/README.*, delete the deleted win32 directory.
      Update README.md and README.Win32.md.
      Update some comments with new RFC numbers.

Wednesday, June 9, 2021 by gharris
  Summary for 4.99.1 tcpdump release
    Source code:
      Squelch some compiler warnings
      ICMP: Update the snapend for some nested IP packets.
      MACsec: Update the snapend thus the ICV field is not payload
        for the caller.
      EIGRP: Fix packet header fields
      SMB: Disable printer by default in CMake builds
      OLSR: Print the protocol name even if the packet is invalid
      MSDP: Print ": " before the protocol name
      ESP: Remove padding, padding length and next header from the buffer
      DHCPv6: Update the snapend for nested DHCPv6 packets
      OpenFlow 1.0: Get snapend right for nested frames.
      TCP: Update the snapend before decoding a MPTCP option
      Ethernet, IEEE 802.15.4, IP, L2TP, TCP, ZEP: Add bounds checks
      ForCES: Refine SPARSEDATA-TLV length check.
      ASCII/hex: Use nd_trunc_longjmp() in truncation cases
      GeoNet: Add a ND_TCHECK_LEN() call
      Replace ND_TCHECK_/memcpy() pairs with GET_CPY_BYTES().
      BGP: Fix overwrites of global 'astostr' temporary buffer
      ARP: fix overwrites of static buffer in q922_string().
      Frame Relay: have q922_string() handle errors better.
    Building and testing:
      Rebuild configure script when building release
      Fix "make clean" for out-of-tree autotools builds
      CMake: add stuff from CMAKE_PREFIX_PATH to PKG_CONFIG_PATH.
    Documentation:
      man: Update a reference as www.cifs.org is gone.
      man: Update DNS sections
    Solaris:
      Fix a compile error with Sun C

Wednesday, December 30, 2020, by mcr@sandelman.ca, denis and fxl.
  Summary for 4.99.0 tcpdump release
    CVE-2018-16301: For the -F option handle large input files safely.
    Improve the contents, wording and formatting of the man page.
    Print unsupported link-layer protocol packets in hex.
    Add support for new network protocols and DLTs: Arista, Autosar SOME/IP,
      Broadcom LI and Ethernet switches tag, IEEE 802.15.9, IP-over-InfiniBand
      (IPoIB), Linux SLL2, Linux vsockmon, MACsec, Marvell Distributed Switch
      Architecture, OpenFlow 1.3, Precision Time Protocol (PTP), SSH, WHOIS,
      ZigBee Encapsulation Protocol (ZEP).
    Make protocol-specific updates for: AH, DHCP, DNS, ESP, FRF.16, HNCP,
      ICMP6, IEEE 802.15.4, IPv6, IS-IS, Linux SLL, LLDP, LSP ping, MPTCP, NFS,
      NSH, NTP, OSPF, OSPF6, PGM, PIM, PPTP, RADIUS, RSVP, Rx, SMB, UDLD,
      VXLAN-GPE.
    User interface:
      Make SLL2 the default for Linux "any" pseudo-device.
      Add --micro and --nano shorthands.
      Add --count to print a counter only instead of decoding.
      Add --print, to cause packet printing even with -w.
      Add support for remote capture if libpcap supports it.
      Display the "wireless" flag and connection status.
      Flush the output packet buffer on a SIGUSR2.
      Add the snapshot length to the "reading from file ..." message.
      Fix local time printing (DST offset in timestamps).
      Allow -C arguments > 2^31-1 GB if they can fit into a long.
      Handle very large -f files by rejecting them.
      Report periodic stats only when safe to do so.
      Print the number of packets captured only as often as necessary.
      With no -s, or with -s 0, don't specify the snapshot length with newer
        versions of libpcap.
      Improve version and usage message printing.
    Building and testing:
      Install into bindir, not sbindir.
      autoconf: replace --with-system-libpcap with --disable-local-libpcap.
      Require the compiler to support C99.
      Better detect and use various C compilers and their features.
      Add CMake as the second build system.
      Make out-of-tree builds more reliable.
      Use pkg-config to detect libpcap if available.
      Improve Windows support.
      Add more tests and improve the scripts that run them.
      Test both with "normal" and "x87" floating-point.
      Eliminate dependency on libdnet.
    FreeBSD:
      Print a proper error message about monitor mode VAP.
      Use libcasper if available.
      Fix failure to capture on RDMA device.
      Include the correct capsicum header.
    Source code:
      Start the transition to longjmp() for packet truncation handling.
      Introduce new helper functions, including GET_*(), nd_print_protocol(),
        nd_print_invalid(), nd_print_trunc(), nd_trunc_longjmp() and others.
      Put integer signedness right in many cases.
      Introduce nd_uint*, nd_mac_addr, nd_ipv4 and nd_ipv6 types to fix
        alignment issues, especially on SPARC.
      Fix many C compiler, Coverity, UBSan and cppcheck warnings.
      Fix issues detected with AddressSanitizer.
      Remove many workarounds for older compilers and OSes.
      Add a sanity check on packet header length.
      Add and remove plenty of bounds checks.
      Clean up pcap_findalldevs() call to find the first interface.
      Use a short timeout, rather than immediate mode, for text output.
      Handle DLT_ENC files *not* written on the same OS and byte-order host.
      Add, and use, macros to do locale-independent case mapping.
      Use a table instead of getprotobynumber().
      Get rid of ND_UNALIGNED and ND_TCHECK().
      Make roundup2() generally available.
      Resync SMI list against Wireshark.
      Fix many typos.

Friday, September 20, 2019, by mcr@sandelman.ca
  A huge thank you to Denis, Francois-Xavier and Guy who did much of the heavy lifting.
  Summary for 4.9.3 tcpdump release
    Fix buffer overflow/overread vulnerabilities:
      CVE-2017-16808 (AoE)
      CVE-2018-14468 (FrameRelay)
      CVE-2018-14469 (IKEv1)
      CVE-2018-14470 (BABEL)
      CVE-2018-14466 (AFS/RX)
      CVE-2018-14461 (LDP)
      CVE-2018-14462 (ICMP)
      CVE-2018-14465 (RSVP)
      CVE-2018-14881 (BGP)
      CVE-2018-14464 (LMP)
      CVE-2018-14463 (VRRP)
      CVE-2018-14467 (BGP)
      CVE-2018-10103 (SMB - partially fixed, but SMB printing disabled)
      CVE-2018-10105 (SMB - too unreliably reproduced, SMB printing disabled)
      CVE-2018-14880 (OSPF6)
      CVE-2018-16451 (SMB)
      CVE-2018-14882 (RPL)
      CVE-2018-16227 (802.11)
      CVE-2018-16229 (DCCP)
      CVE-2018-16230 (BGP)
      CVE-2018-16452 (SMB)
      CVE-2018-16300 (BGP)
      CVE-2018-16228 (HNCP)
      CVE-2019-15166 (LMP)
      CVE-2019-15167 (VRRP)
    Fix for cmdline argument/local issues:
      CVE-2018-14879 (tcpdump -V)

Sunday September 3, 2017 denis@ovsienko.info
  Summary for 4.9.2 tcpdump release
    Do not use getprotobynumber() for protocol name resolution.  Do not do
      any protocol name resolution if -n is specified.
    Improve errors detection in the test scripts.
    Fix a segfault with OpenSSL 1.1 and improve OpenSSL usage.
    Clean up IS-IS printing.
    Fix buffer overflow vulnerabilities:
      CVE-2017-11543 (SLIP)
      CVE-2017-13011 (bittok2str_internal)
    Fix infinite loop vulnerabilities:
      CVE-2017-12989 (RESP)
      CVE-2017-12990 (ISAKMP)
      CVE-2017-12995 (DNS)
      CVE-2017-12997 (LLDP)
    Fix buffer over-read vulnerabilities:
      CVE-2017-11541 (safeputs)
      CVE-2017-11542 (PIMv1)
      CVE-2017-12893 (SMB/CIFS)
      CVE-2017-12894 (lookup_bytestring)
      CVE-2017-12895 (ICMP)
      CVE-2017-12896 (ISAKMP)
      CVE-2017-12897 (ISO CLNS)
      CVE-2017-12898 (NFS)
      CVE-2017-12899 (DECnet)
      CVE-2017-12900 (tok2strbuf)
      CVE-2017-12901 (EIGRP)
      CVE-2017-12902 (Zephyr)
      CVE-2017-12985 (IPv6)
      CVE-2017-12986 (IPv6 routing headers)
      CVE-2017-12987 (IEEE 802.11)
      CVE-2017-12988 (telnet)
      CVE-2017-12991 (BGP)
      CVE-2017-12992 (RIPng)
      CVE-2017-12993 (Juniper)
      CVE-2017-12994 (BGP)
      CVE-2017-12996 (PIMv2)
      CVE-2017-12998 (ISO IS-IS)
      CVE-2017-12999 (ISO IS-IS)
      CVE-2017-13000 (IEEE 802.15.4)
      CVE-2017-13001 (NFS)
      CVE-2017-13002 (AODV)
      CVE-2017-13003 (LMP)
      CVE-2017-13004 (Juniper)
      CVE-2017-13005 (NFS)
      CVE-2017-13006 (L2TP)
      CVE-2017-13007 (Apple PKTAP)
      CVE-2017-13008 (IEEE 802.11)
      CVE-2017-13009 (IPv6 mobility)
      CVE-2017-13010 (BEEP)
      CVE-2017-13012 (ICMP)
      CVE-2017-13013 (ARP)
      CVE-2017-13014 (White Board)
      CVE-2017-13015 (EAP)
      CVE-2017-11543 (SLIP)
      CVE-2017-13016 (ISO ES-IS)
      CVE-2017-13017 (DHCPv6)
      CVE-2017-13018 (PGM)
      CVE-2017-13019 (PGM)
      CVE-2017-13020 (VTP)
      CVE-2017-13021 (ICMPv6)
      CVE-2017-13022 (IP)
      CVE-2017-13023 (IPv6 mobility)
      CVE-2017-13024 (IPv6 mobility)
      CVE-2017-13025 (IPv6 mobility)
      CVE-2017-13026 (ISO IS-IS)
      CVE-2017-13027 (LLDP)
      CVE-2017-13028 (BOOTP)
      CVE-2017-13029 (PPP)
      CVE-2017-13030 (PIM)
      CVE-2017-13031 (IPv6 fragmentation header)
      CVE-2017-13032 (RADIUS)
      CVE-2017-13033 (VTP)
      CVE-2017-13034 (PGM)
      CVE-2017-13035 (ISO IS-IS)
      CVE-2017-13036 (OSPFv3)
      CVE-2017-13037 (IP)
      CVE-2017-13038 (PPP)
      CVE-2017-13039 (ISAKMP)
      CVE-2017-13040 (MPTCP)
      CVE-2017-13041 (ICMPv6)
      CVE-2017-13042 (HNCP)
      CVE-2017-13043 (BGP)
      CVE-2017-13044 (HNCP)
      CVE-2017-13045 (VQP)
      CVE-2017-13046 (BGP)
      CVE-2017-13047 (ISO ES-IS)
      CVE-2017-13048 (RSVP)
      CVE-2017-13049 (Rx)
      CVE-2017-13050 (RPKI-Router)
      CVE-2017-13051 (RSVP)
      CVE-2017-13052 (CFM)
      CVE-2017-13053 (BGP)
      CVE-2017-13054 (LLDP)
      CVE-2017-13055 (ISO IS-IS)
      CVE-2017-13687 (Cisco HDLC)
      CVE-2017-13688 (OLSR)
      CVE-2017-13689 (IKEv1)
      CVE-2017-13690 (IKEv2)
      CVE-2017-13725 (IPv6 routing headers)

Sunday July 23, 2017 denis@ovsienko.info
  Summary for 4.9.1 tcpdump release
    CVE-2017-11108/Fix bounds checking for STP.
    Make assorted documentation updates and fix a few typos in tcpdump output.
    Fixup -C for file size >2GB (GH #488).
    Show AddressSanitizer presence in version output.
    Fix a bug in test scripts (exposed in GH #613).
    On FreeBSD adjust Capsicum capabilities for netmap.
    On Linux fix a use-after-free when the requested interface does not exist.

Wednesday January 18, 2017 devel.fx.lebail@orange.fr
  Summary for 4.9.0 tcpdump release
    General updates:
    Fix some heap overflows found with American Fuzzy Lop by Hanno Boeck and others
        (More information in the log with CVE-2016-* and CVE-2017-*)
    Change the way protocols print link-layer addresses (Fix heap overflows
        in CALM-FAST and GeoNetworking printers)
    Pass correct caplen value to ether_print() and some other functions
    Fix lookup_nsap() to match what isonsap_string() expects
    Clean up relative time stamp printing (Fix an array overflow)
    Fix some alignment issues with GCC on Solaris 10 SPARC
    Add some ND_TTEST_/ND_TCHECK_ macros to simplify writing bounds checks
    Add a fn_printztn() which returns the number of bytes processed
    Add nd_init() and nd_cleanup() functions. Improve libsmi support
    Add CONTRIBUTING file
    Add a summary comment in all printers
    Compile with more warning options in devel mode if supported (-Wcast-qual, ...)
    Fix some leaks found by Valgrind/Memcheck
    Fix a bunch of de-constifications
    Squelch some Coverity warnings and some compiler warnings
    Update Coverity and Travis-CI setup
    Update Visual Studio files

    Frontend:
    Fix capsicum support to work with zerocopy buffers in bpf
    Try opening interfaces by name first, then by name-as-index
    Work around pcap_create() failures fetching time stamp type lists
    Fix a segmentation fault with 'tcpdump -J'
    Improve addrtostr6() bounds checking
    Add exit_tcpdump() function
    Don't drop CAP_SYS_CHROOT before chrooting
    Fixes issue where statistics not reported when -G and -W options used

    Updated printers:
    802.11: Beginnings of 11ac radiotap support
    802.11: Check the Protected bit for management frames
    802.11: Do bounds checking on last_presentp before dereferencing it (Fix a heap overflow)
    802.11: Fix the radiotap printer to handle the special bits correctly
    802.11: If we have the MCS field, it's 11n
    802.11: Only print unknown frame type or subtype messages once
    802.11: Radiotap dBm values get printed as dB; Update a test output accordingly
    802.11: Source and destination addresses were backwards
    AH: Add a bounds check
    AH: Report to our caller that dissection failed if a bounds check fails
    AP1394: Print src > dst, not dst > src
    ARP: Don't assume the target hardware address is <= 6 octets long (Fix a heap overflow)
    ATALK: Add bounds and length checks (Fix heap overflows)
    ATM: Add some bounds checks (Fix a heap overflow)
    ATM: Fix an incorrect bounds check
    BFD: Update specification from draft to RFC 5880
    BFD: Update to print optional authentication field
    BGP: Add support for the AIGP attribute (RFC7311)
    BGP: Print LARGE_COMMUNITY Path Attribute
    BGP: Update BGP numbers from IANA; Print minor values for FSM notification
    BOOTP: Add a bounds check
    Babel: Add decoder for source-specific extension
    CDP: Filter out non-printable characters
    CFM: Fixes to match the IEEE standard, additional bounds and length checks
    CSLIP: Add more bounds checks (Fix a heap overflow)
    ClassicalIPoATM: Add a bounds check on LLC+SNAP header (Fix a heap overflow)
    DHCP: Fix MUDURL and TZ options
    DHCPv6: Process MUDURL and TZ options
    DHCPv6: Update Status Codes with RFCs/IANA names
    DNS: Represent the "DNSSEC OK" bit as "DO" instead of "OK". Add a test case
    DTP: Improve packet integrity checks
    EGP: Fix bounds checks
    ESP: Don't use OpenSSL_add_all_algorithms() in OpenSSL 1.1.0 or later
    Ethernet: Add some bounds checking before calling isoclns_print (Fix a heap overflow)
    Ethernet: Print the Length/Type field as length when needed
    FDDI: Fix -e output for FDDI
    FR: Add some packet-length checks and improve Q.933 printing (Fix heap overflows)
    GRE: Add some bounds checks (Fix heap overflows)
    Geneve: Fix error message with invalid option length; Update list option classes
    HNCP: Fix incorrect time interval format. Fix handling of IPv4 prefixes
    ICMP6: Fetch a 32-bit big-endian quantity with EXTRACT_32BITS()
    IGMP: Add a length check
    IP: Add a bounds check (Fix a heap overflow)
    IP: Check before fetching the protocol version (Fix a heap overflow)
    IP: Don't try to dissect if IP version != 4 (Fix a heap overflow)
    IP: Stop processing IPPROTO_ values once we hit IPPROTO_IPCOMP
    IPComp: Check whether we have the CPI before we fetch it (Fix a heap overflow)
    IPoFC: Fix -e output (IP-over-Fibre Channel)
    IPv6: Don't overwrite the destination IPv6 address for routing headers
    IPv6: Fix header printing
    IPv6: Stop processing IPPROTO_ values once we hit IPPROTO_IPCOMP
    ISAKMP: Clean up parsing of IKEv2 Security Associations
    ISOCLNS/IS-IS: Add support for Purge Originator Identifier (RFC6232) and test cases
    ISOCLNS/IS-IS: Don't overwrite packet data when checking the signature
    ISOCLNS/IS-IS: Filter out non-printable characters
    ISOCLNS/IS-IS: Fix segmentation faults
    ISOCLNS/IS-IS: Have signature_verify() do the copying and clearing
    ISOCLNS: Add some bounds checks
    Juniper: Make sure a Juniper header TLV isn't bigger than what's left in the packet (Fix a heap overflow)
    LLC/SNAP: With -e, print the LLC header before the SNAP header; without it, cut the SNAP header
    LLC: Add a bounds check (Fix a heap overflow)
    LLC: Clean up printing of LLC packets
    LLC: Fix the printing of RFC 948-style IP packets
    LLC: Skip the LLC and SNAP headers with -x for 802.11 and some other protocols
    LLDP: Implement IANA OUI and LLDP MUD option
    MPLS LSP ping: Update printing for RFC 4379, bug fixes, more bounds checks
    MPLS: "length" is now the *remaining* packet length
    MPLS: Add bounds and length checks (Fix a heap overflow)
    NFS: Don't assume the ONC RPC header is nicely aligned
    NFS: Don't overflow the Opaque_Handle buffer (Fix a segmentation fault)
    NFS: Don't run past the end of an NFSv3 file handle
    OLSR: Add a test to cover a HNA sgw case
    OLSR: Fix 'Advertised networks' count
    OLSR: Fix printing of smart-gateway HNAs in IPv4
    OSPF: Add a bounds check for the Hello packet options
    OSPF: Do more bounds checking
    OSPF: Fix a segmentation fault
    OSPF: Fix printing 'ospf_topology_values' default
    OTV: Add missing bounds checks
    PGM: Print the formatted IP address, not the raw binary address, as a string
    PIM: Add some bounds checking (Fix a heap overflow)
    PIMv2: Fix checksumming of Register messages
    PPP: Add some bounds checks (Fix a heap overflow)
    PPP: Report invalid PAP AACK/ANAK packets
    Q.933: Add a missing bounds check
    RADIUS: Add Value 13 "VLAN" to Tunnel-Type attribute
    RADIUS: Filter out non-printable characters
    RADIUS: Translate UDP/1700 as RADIUS
    RESP: Do better checking of RESP packets
    RPKI-RTR: Add a return value check for "fn_printn" call
    RPKI-RTR: Remove printing when truncated condition already detected
    RPL: Fix 'Consistency Check' control code
    RPL: Fix suboption print
    RSVP: An INTEGRITY object in a submessage covers only the submessage
    RSVP: Fix an infinite loop; Add bounds and length checks
    RSVP: Fix some if statements missing brackets
    RSVP: Have signature_verify() do the copying and clearing
    RTCP: Add some bounds checks
    RTP: Add some bounds checks, fix two segmentation faults
    SCTP: Do more bounds checking
    SFLOW: Fix bounds checking
    SLOW: Fix bugs, add checks
    SMB: Before fetching the flags2 field, make sure we have it
    SMB: Do bounds checks on NBNS resource types and resource data lengths
    SNMP: Clean up the "have libsmi but no modules loaded" case
    SNMP: Clean up the object abbreviation list and fix the code to match them
    SNMP: Do bounds checks when printing character and octet strings
    SNMP: Improve ASN.1 bounds checks
    SNMP: More bounds and length checks
    STP: Add a bunch of bounds checks, and fix some printing (Fix heap overflows)
    STP: Filter out non-printable characters
    TCP: Add bounds and length checks for packets with TCP option 20
    TCP: Correct TCP option Kind value for TCP Auth and add SCPS-TP
    TCP: Fix two bounds checks (Fix heap overflows)
    TCP: Make sure we have the data offset field before fetching it (Fix a heap overflow)
    TCP: Put TCP-AO option decoding right
    TFTP: Don't use strchr() to scan packet data (Fix a heap overflow)
    Telnet: Add some bounds checks
    TokenRing: Fix -e output
    UDLD: Fix an infinite loop
    UDP: Add a bounds check (Fix a heap overflow)
    UDP: Check against the packet length first
    VAT: Add some bounds checks
    VTP: Add a test on Mgmt Domain Name length
    VTP: Add bounds checks and filter out non-printable characters
    VXLAN: Add a bound check and a test case
    ZeroMQ: Fix an infinite loop

Tuesday October 25, 2016 mcr@sandelman.ca
  Summary for 4.8.1 tcpdump release
        Fix "-x" for Apple PKTAP and PPI packets
        Improve separation frontend/backend (tcpdump/libnetdissect)
        Fix display of timestamps with -tt, -ttt and -ttttt options
        Add support for the Marvell Extended Distributed Switch Architecture header
        Use PRIx64 to print a 64-bit number in hex.
        Printer for HNCP (RFCs 7787 and 7788).
        dagid is always an IPv6 address, not an opaque 128-bit string, and other fixes to RPL printer.
        RSVP: Add bounds and length checks
        OSPF: Do more bounds checking
        Handle OpenSSL 1.1.x.
        Initial support for the REdis Serialization Protocol known as RESP.
        Add printing function for Generic Protocol Extension for VXLAN
            draft-ietf-nvo3-vxlan-gpe-01
        Network Service Header: draft-ietf-sfc-nsh-01
        Don't recompile the filter if the new file has the same DLT.
        Pass an adjusted struct pcap_pkthdr to the sub-printer.
        Add three test cases for already fixed CVEs
           CVE-2014-8767: OLSR
           CVE-2014-8768: Geonet
           CVE-2014-8769: AODV
        Don't do the DDP-over-UDP heuristic first: GitHub issue #499.
        Use the new debugging routines in libpcap.
        Harmonize TCP source or destination ports tests with UDP ones
        Introduce data types to use for integral values in packet structures.
        RSVP: Fix an infinite loop
        Support of Type 3 and Type 4 LISP packets.
        Don't require IPv6 library support in order to support IPv6 addresses.
        Many many changes to support libnetdissect usage.
        Add a test that makes unaligned accesses: GitHub issue #478.
        add a DNSSEC test case: GH #445 and GH #467.
        BGP: add decoding of ADD-PATH capability
        fixes to LLC header printing, and RFC948-style IP packets

Friday April 10, 2015 guy@alum.mit.edu
  Summary for 4.7.4 tcpdump release
        RPKI to Router Protocol: Fix Segmentation Faults and other problems
        RPKI to Router Protocol: print strings with fn_printn()
        wb: fix some bounds checks

Wednesday March 11, 2015 mcr@sandelman.ca
  Summary for 4.7.3 tcpdump release
        Capsicum fixes for FreeBSD 10

Tuesday March 10, 2015 mcr@sandelman.ca
  Summary for 4.7.2 tcpdump release
        DCCP: update Packet Types with RFC4340/IANA names
        fixes for CVE-2015-0261: IPv6 mobility header check issue
        fixes for CVE-2015-2153, 2154, 2155: kday packets

Friday Nov. 12, 2014 guy@alum.mit.edu
  Summary for 4.7.0 tcpdump release
        changes to hex printing of CDP packets
        Fix PPI printing
        Radius: update Packet Type Codes and Attribute Types with RFC/IANA names
        Add a routine to print "text protocols", and add FTP/HTTP/SMTP/RTSP support.
        improvements to telnet printer, even if not -v
        omit length for bcp, print-tcp uses it
        formatting fixes for a bunch of protocols
        new bounds checks for a number of protocols
        split netflow 1,6, and 6 dissector up.
        added geneve dissector
        CVE-2014-9140 PPP dissector fixed.

Tuesday  Sep.  2, 2014 mcr@sandelman.ca
  Summary for 4.6.2 tcpdump release
        fix out-of-source-tree builds: find libpcap that is out of source
        better configure check for libsmi

Saturday Jul. 19, 2014 mcr@sandelman.ca
  Summary for 4.6.1 tcpdump release
        added FreeBSD capsicum
        add a short option '#', same as long option '--number'

Wednesday Jul. 2, 2014 mcr@sandelman.ca
  Summary for 4.6.0 tcpdump release
        all of tcpdump is now using the new "NDO" code base (Thanks Denis!)
        nflog, mobile, forces, pptp, AODV, AHCP, IPv6, OSPFv4, RPL, DHCPv6 enhancements/fixes
        M3UA decode added.
        many new test cases: 82 in 4.5.1 to 133 in 4.6.0
        many improvements to travis continuous integration system: OSX, and Coverity options
        cleaned up some unnecessary header files
        Added bittok2str().
        a number of unaligned access faults fixed
        -A flag does not consider CR to be printable anymore
        fx.lebail took over coverity baby sitting
        default snapshot size increased to 256K for accommodate USB captures
        WARNING: this release contains a lot of very worthwhile code churn.

Wednesday Jan. 15, 2014 guy@alum.mit.edu
  Summary for 4.5.2 tcpdump release
        Man page fix
        Fix crashes on SPARC

Monday Nov. 11, 2013 mcr@sandelman.ca
  Summary for 4.5.1 tcpdump release
        CREDITS file fixes

Thursday Nov. 7, 2013  mcr@sandelman.ca and guy@alum.mit.edu.
  Summary for 4.5.0 tcpdump release
        some NFSv4 fixes for printing
        fix printing of unknown TCP options, and tcp fast-open
        fixes for syslog parser
        some gcc-version-specific flag tuning
        adopt MacOS deprecation workarounds for openssl
        improvements to babel printing
        add OpenFlow 1.0 (no SSL) and test cases
        GeoNet printer.
        added STBC Rx support
        improvements to DHCPv6 decoder
        clarify which autoconf is needed
        Point users to the the-tcpdump-group repository on GitHub rather
            than the mcr repository
        Add MSDP printer.
        Fixed IPv6 check on Solaris and other OSes requiring extra
            networking libraries.
        Add support for VXLAN (draft-mahalingam-dutt-dcops-vxlan-03),
            and add "vxlan" as an option for -T.
        Add support for OTV (draft-hasmit-otv-04).
        fixes for DLT_IEEE802_11_RADIO datalink types
        added MPTCP decoder

Saturday April 6, 2013 guy@alum.mit.edu.
  Summary for 4.4.0 tcpdump release
        RPKI-RTR (RFC6810) is now official (TCP Port 323)
        Fix detection of OpenSSL libcrypto.
        Add DNSSL (RFC6106) support.
        Add "radius" as an option for -T.
        Update Action codes for handle_action function according to
            802.11s amendment.
        Decode DHCPv6 AFTR-Name option (RFC6334).
        Updates for Babel.
        Fix printing of infinite lifetime in ICMPv6.
        Added support for SPB, SPBM Service Identifier, and Unicast
            Address sub-TLV in ISIS.
        Decode RIPv2 authentication up to RFC4822.
        Fix RIP Request/full table decoding issues.
        On Linux systems with cap-ng.h, drop root privileges
            using Linux Capabilities.
        Add support for reading multiple files.
        Add MS NLB heartbeat printer.
        Separate multiple nexthops in BGP.

Wednesday  November 28, 2012 guy@alum.mit.edu.
  Summary for 4.3.1 tcpdump release
        Print "LLDP, length N" for LLDP packets even when not in verbose
            mode, so something is printed even if only the timestamp is
            present
        Document "-T carp"
        Print NTP poll interval correctly (it's an exponent, so print
            both its raw value and 2^value)
        Document that "-e" is used to get MAC addresses
        More clearly document that you need to escape or quote
            backslashes in filter expressions on the command line
        Fix some "the the" in the man page
        Use the right maximum path length
        Don't treat 192_1_2, when passed to -i, as an interface number

Friday  April 3, 2012.  mcr@sandelman.ca.
  Summary for 4.3.0 tcpdump release
        fixes for forces: SPARSE data (per RFC 5810)
        some more test cases added
        updates to documentation on -l, -U and -w flags.
        Fix printing of BGP optional headers.
        Tried to include DLT_PFSYNC support, failed due to headers required.
        added TIPC support.
        Fix LLDP Network Policy bit definitions.
        fixes for IGMPv3's Max Response Time: it is in units of 0.1 second.
        SIGUSR1 can be used rather than SIGINFO for stats
        permit -n flag to affect print-ip for protocol numbers
        ND_OPT_ADVINTERVAL is in milliseconds, not seconds
        Teach PPPoE parser about RFC 4638


Friday  December 9, 2011.  guy@alum.mit.edu.
  Summary for 4.2.1 tcpdump release
        Only build the Babel printer if IPv6 is enabled.
        Support Babel on port 6696 as well as 6697.
        Include ppi.h in release tarball.
        Include all the test files in the release tarball, and don't
         "include" test files that no longer exist.
        Don't assume we have <rpc/rpc.h> - check for it.
        Support "-T carp" as a way of dissecting IP protocol 112 as CARP
         rather than VRRP.
        Support Hilscher NetAnalyzer link-layer header format.
        Constify some pointers and fix compiler warnings.
        Get rid of never-true test.
        Fix an unintended fall-through in a case statement in the ARP
         printer.
        Fix several cases where sizeof(sizeof(XXX)) was used when just
         sizeof(XXX) was intended.
        Make stricter sanity checks in the ES-IS printer.
        Get rid of some GCCisms that caused builds to fai with compilers
         that don't support them.
        Fix typo in man page.
        Added length checks to Babel printer.

Sunday  July 24, 2011.  mcr@sandelman.ca.
  Summary for 4.2.+
        merged 802.15.4 decoder from Dmitry Eremin-Solenikov <dbaryshkov
          at gmail dot com>
        updates to forces for new port numbers
        Use "-H", not "-h", for the 802.11s option. (-h always help)
        Better ICMPv6 checksum handling.
        add support for the RPKI/Router Protocol, per -ietf-sidr-rpki-rtr-12
        get rid of uuencoded pcap test files, git can do binary.
        sFlow changes for 64-bit counters.
        fixes for PPI packet header handling and printing.
        Add DCB Exchange protocol (DCBX) version 1.01.
        Babel dissector, from Juliusz Chroboczek and Grégoire Henry.
        improvements to radiotap for rate values > 127.
        Many improvements to ForCES decode, including fix SCTP TML port
        updated RPL type code to RPL-17 draft
        Improve printout of DHCPv6 options.
        added support and test case for QinQ (802.1q VLAN) packets
        Handle DLT_IEEE802_15_4_NOFCS like DLT_IEEE802_15_4.
        Build fixes for Sparc and other machines with alignment restrictions.
        Merged changes from Debian package.
        PGM: Add ACK decoding and add PGMCC DATA and FEEDBACK options.
        Build fixes for OSX (Snow Leopard and others)
        Add support for IEEE 802.15.4 packets

Tue.    July 20, 2010.  guy@alum.mit.edu.
  Summary for 4.1.2 tcpdump release
        If -U is specified, flush the file after creating it, so it's
          not zero-length
        Fix TCP flags output description, and some typos, in the man
          page
        Add a -h flag, and only attempt to recognize 802.11s mesh
          headers if it's set
        When printing the link-layer type list, send *all* output to
          stderr
        Include the CFLAGS setting when configure was run in the
          compiler flags

Thu.    April 1, 2010.  guy@alum.mit.edu.
  Summary for 4.1.1 tcpdump release
        Fix build on systems with PF, such as FreeBSD and OpenBSD.
        Don't blow up if a zero-length link-layer address is passed to
          linkaddr_string().

Thu.    March 11, 2010.  ken@netfunctional.ca/guy@alum.mit.edu.
  Summary for 4.1.0 tcpdump release
        Fix printing of MAC addresses for VLAN frames with a length
          field
        Add some additional bounds checks and use the EXTRACT_ macros
          more
        Add a -b flag to print the AS number in BGP packets in ASDOT
          notation rather than ASPLAIN notation
        Add ICMPv6 RFC 5006 support
        Decode the access flags in NFS access requests
        Handle the new DLT_ for memory-mapped USB captures on Linux
        Make the default snapshot (-s) the maximum
        Print name of device (when -L is used)
        Support for OpenSolaris (and SXCE build 125 and later)
        Print new TCP flags
        Add support for RPL DIO
        Add support for TCP User Timeout (UTO)
        Add support for non-standard Ethertypes used by 3com PPPoE gear
        Add support for 802.11n and 802.11s
        Add support for Transparent Ethernet Bridge ethertype in GRE
        Add 4 byte AS support for BGP printer
        Add support for the MDT SAFI 66 BG printer
        Add basic IPv6 support to print-olsr
        Add USB printer
        Add printer for ForCES
        Handle frames with an FCS
        Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames
        Fix TCP sequence number printing
        Report 802.2 packets as 802.2 instead of 802.3
        Don't include -L/usr/lib in LDFLAGS
        On x86_64 Linux, look in lib64 directory too
        Lots of code clean ups
        Autoconf clean ups
        Update testcases to make output changes
        Fix compiling with/out smi (--with{,out}-smi)
        Fix compiling without IPv6 support (--disable-ipv6)

Mon.    October 27, 2008.  ken@netfunctional.ca.  Summary for 4.0.0 tcpdump release
        Add support for Bluetooth Sniffing
        Add support for Realtek Remote Control Protocol (openrrcp.org.ru)
        Add support for 802.11 AVS
        Add support for SMB over TCP
        Add support for 4 byte BGP AS printing
        Add support for compiling on case-insensitive file systems
        Add support for ikev2 printing
        Update support for decoding AFS
        Update DHCPv6 printer
        Use newer libpcap API's (allows -B option on all platforms)
        Add -I to turn on monitor mode
        Bugfixes in lldp, lspping, dccp, ESP, NFS printers
        Cleanup unused files and various cruft

Mon.    September 10, 2007.  ken@xelerance.com.  Summary for 3.9.8 tcpdump release
        Rework ARP printer
        Rework OSPFv3 printer
        Add support for Frame-Relay ARP
        Decode DHCP Option 121 (RFC 3442 Classless Static Route)
        Decode DHCP Option 249 (MS Classless Static Route) the same as Option 121
        TLV: Add support for Juniper .pcap extensions
        Print EGP header in new-world-order style
        Converted print-isakmp.c to NETDISSECT
        Moved AF specific stuff into af.h
        Test subsystem now table driven, and saves outputs and diffs to one place
        Require <net/pfvar.h> for pf definitions - allows reading of pflog formatted
         libpcap files on an OS other than where the file was generated


Wed.    July 23, 2007.  mcr@xelerance.com.  Summary for 3.9.7 libpcap release

        NFS: Print unsigned values as such.
        RX: parse safely.
        BGP: fixes for IPv6-less builds.
        801.1ag: use standard codepoint.
        use /dev/bpf on systems with such a device.
        802.11: print QoS data, avoid dissect of no-data frame, ignore padding.
        smb: make sure that we haven't gone past the end of the captured data.
        smb: squelch an uninitialized complaint from coverity.
        NFS: from NetBSD; don't interpret the reply as a possible NFS reply
                if it got MSG_DENIED.
        BGP: don't print TLV values that didn't fit, from www.digit-labs.org.
        revised INSTALL.txt about libpcap dependency.

Wed.    April 25, 2007. ken@xelerance.com.  Summary for 3.9.6 tcpdump release
        Update man page to reflect changes to libpcap
        Changes to both TCP and IP Printer Output
        Fix a potential buffer overflow in the 802.11 printer
        Print basic info about a few more Cisco LAN protocols.
        mDNS cleanup
        ICMP MPLS rework of the extension code
        bugfix: use the correct codepoint for the OSPF simple text auth token
         entry, and use safeputs to print the password.
        Add support in pflog for additional values
        Add support for OIF RSVP Extensions UNI 1.0 Rev. 2 and additional RSVP objects
        Add support for the Message-id NACK c-type.
        Add support for 802.3ah loopback ctrl msg
        Add support for Multiple-STP as per 802.1s
        Add support for rapid-SPT as per 802.1w
        Add support for CFM Link-trace msg, Link-trace-Reply msg,
         Sender-ID tlv, private tlv, port, interface status
        Add support for unidirectional link detection as per
         https://tools.ietf.org/id/draft-foschiano-udld-02.txt
        Add support for the olsr protocol as per RFC 3626 plus the LQ
         extensions from olsr.org
        Add support for variable-length checksum in DCCP, as per section 9 of
         RFC 4340.
        Add support for per-VLAN spanning tree and per-VLAN rapid spanning tree
        Add support for Multiple-STP as per 802.1s
        Add support for the cisco proprietary 'dynamic trunking protocol'
        Add support for the cisco proprietary VTP protocol
        Update dhcp6 options table as per IETF standardization activities


Tue.    September 19, 2006. ken@xelerance.com. Summary for 3.9.5 tcpdump release

        Fix compiling on AIX (, at end of ENUM)
        Updated list of DNS RR typecodes
        Use local Ethernet defs on WIN32
        Add support for Frame-Relay ARP
        Fixes for compiling under MSVC++
        Add support for parsing Juniper .pcap files
        Add support for FRF.16 Multilink Frame-Relay (DLT_MFR)
        Rework the OSPFv3 printer
        Fix printing for 4.4BSD/NetBSD NFS Filehandles
        Add support for Cisco style NLPID encapsulation
        Add cisco prop. eigrp related, extended communities
        Add support for BGP signaled VPLS
        Cleanup the bootp printer
        Add support for PPP over Frame-Relay
        Add some bounds checking to the IP options code, and clean up
         the options output a bit.
        Add additional modp groups to ISAKMP printer
        Add support for Address-Withdraw and Label-Withdraw Msgs
        Add support for the BFD Discriminator TLV
        Fixes for 64bit compiling
        Add support for PIMv2 checksum verification
        Add support for further dissection of the IPCP Compression Option
        Add support for Cisco's proposed VQP protocol
        Add basic support for keyed authentication TCP option
        Lots of minor cosmetic changes to output printers


Mon.    September 19, 2005.  ken@xelerance.com. Summary for 3.9.4 tcpdump release
        Decoder support for more Juniper link-layer types
        Fix a potential buffer overflow (although it can't occur in
                practice).
        Fix the handling of unknown management frame types in the 802.11
                printer.
        Add FRF.16 support, fix various Frame Relay bugs.
        Add support for RSVP integrity objects, update fast-reroute
                object printer to latest spec.
        Clean up documentation of vlan filter expression, document mpls
                filter expression.
        Document new pppoed and pppoes filter expressions.
        Update diffserver-TE codepoints as per RFC 4124.
        Spelling fixes in ICMPv6.
        Don't require any fields other than flags to be present in IS-IS
                restart signaling TLVs, and only print the system ID in
                those TLVs as system IDs, not as node IDs.
        Support for DCCP.

Tue.    July 5, 2005.  ken@xelerance.com. Summary for 3.9.3 tcpdump release

        Option to chroot() when dropping privs
        Fixes for compiling on nearly every platform,
                including improved 64bit support
        Many new testcases
        Support for sending packets
        Many compilation fixes on most platforms
        Fixes for recent version of GCC to eliminate warnings
        Improved Unicode support

        Decoders & DLT Changes, Updates and New:
                AES ESP support
                Juniper ATM, FRF.15, FRF.16, PPPoE,
                        ML-FR, ML-PIC, ML-PPP, PL-PPP, LS-PIC
                        GGSN,ES,MONITOR,SERVICES
                L2VPN
                Axent Raptor/Symantec Firewall
                TCP-MD5 (RFC 2385)
                ESP-in-UDP (RFC 3948)
                ATM OAM
                LMP, LMP Service Discovery
                IP over FC
                IP over IEEE 1394
                BACnet MS/TP
                SS7
                LDP over TCP
                LACP, MARKER as per 802.3ad
                PGM (RFC 3208)
                LSP-PING
                G.7041/Y.1303 Generic Framing Procedure
                EIGRP-IP, EIGRP-IPX
                ICMP6
                Radio - via radiotap
                DHCPv6
                HDLC over PPP

Tue.   March 30, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.3 release

        No changes from 3.8.2. Version bumped only to maintain consistency
        with libpcap 0.8.3.

Mon.   March 29, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.2 release

        Fixes for print-isakmp.c      CVE:    CAN-2004-0183, CAN-2004-0184
        https://web.archive.org/web/20160328035955/https://www.rapid7.com/resources/advisories/R7-0017.jsp
        IP-over-IEEE1394 printing.
        some MINGW32 changes.
        updates for autoconf 2.5
        fixes for print-aodv.c - check for too short packets
        formatting changes to print-ascii for hex output.
        check for too short packets: print-bgp.c, print-bootp.c, print-cdp.c,
                print-chdlc.c, print-domain.c, print-icmp.c, print-icmp6.c,
                print-ip.c, print-lwres.c, print-ospf.c, print-pim.c,
                print-ppp.c,print-pppoe.c, print-rsvp.c, print-wb.c
        print-ether.c - better handling of unknown types.
        print-isoclns.c - additional decoding of types.
        print-llc.c - strings for LLC names added.
        print-pfloc.c - various enhancements
        print-radius.c - better decoding to strings.

Wed.   November 12, 2003. mcr@sandelman.ottawa.on.ca. Summary for 3.8 release

        changed syntax of -E argument so that multiple SAs can be decrypted
        fixes for Digital Unix headers and Documentation
        __attribute__ fixes
        CDP changes from Terry Kennedy <terry@tmk.com>.
        IPv6 mobility updates from Kazushi Sugyo <sugyo@pb.jp.nec.com>
        Fixes for ASN.1 decoder for 2.100.3 forms.
        Added a count of packets received and processed to clarify numbers.
        Incorporated WinDUMP patches for Win32 builds.
        PPPoE payload length headers.
        Fixes for HP C compiler builds.
        Use new pcap_breakloop() and pcap_findalldevs() if we can.
        BGP output split into multiple lines.
        Fixes to 802.11 decoding.
        Fixes to PIM decoder.
        SuperH is a CPU that can't handle unaligned access. Many fixes for
                unaligned access work.
        Fixes to Frame-Relay decoder for Q.933/922 frames.
        Clarified when Solaris can do captures as non-root.
        Added tests/ subdir for examples/regression tests.
        New -U flag.    -flush stdout after every packet
        New -A flag     -print ascii only
        support for decoding IS-IS inside Cisco HDLC Frames
        more verbosity for tftp decoder
        mDNS decoder
        new BFD decoder
        cross compilation patches
        RFC 3561 AODV support.
        UDP/TCP pseudo-checksum properly for source-route options.
        sanitized all files to modified BSD license
        Add support for RFC 2625 IP-over-Fibre Channel.
        fixes for DECnet support.
        Support RFC 2684 bridging of Ethernet, 802.5 Token Ring, and FDDI.
        RFC 2684 encapsulation of BPDUs.

Tuesday, February 25, 2003. fenner@research.att.com.  3.7.2 release

        Fixed infinite loop when parsing invalid isakmp packets.
         (reported by iDefense; already fixed in CVS)
        Fixed infinite loop when parsing invalid BGP packets.
        Fixed buffer overflow with certain invalid NFS packets.
        Pretty-print unprintable network names in 802.11 printer.
        Handle truncated nbp (appletalk) packets.
        Updated DHCPv6 printer to match draft-ietf-dhc-dhcpv6-22.txt
        Print IP protocol name even if we don't have a printer for it.
        Print IP protocol name or number for fragments.
        Print the whole MPLS label stack, not just the top label.
        Print request header and file handle for NFS v3 FSINFO and PATHCONF
         requests.
        Fix NFS packet truncation checks.
        Handle "old" DR-Priority and Bidir-Capable PIM HELLO options.
        Handle unknown RADIUS attributes properly.
        Fix an ASN.1 parsing error that would cause e.g. the OID
         2.100.3 to be misrepresented as 4.20.3 .

Monday, January 21, 2002. mcr@sandelman.ottawa.on.ca. Summary for 3.7 release
        keyword "ipx" added.
        Better OSI/802.2 support on Linux.
        IEEE 802.11 support, from clenahan@fortresstech.com, achirica@ttd.net.
        LLC SAP support for FDDI/token ring/RFC-1483 style ATM
        BXXP protocol was replaced by the BEEP protocol;
        improvements to SNAP demux.
        Changes to "any" interface documentation.
        Documentation on pcap_stats() counters.
        Fix a memory leak found by Miklos Szeredi - pcap_ether_aton().
        Added MPLS encapsulation decoding per RFC3032.
        DNS dissector handles TKEY, TSIG and IXFR.
        adaptive SLIP interface patch from Igor Khristophorov <igor@atdot.org>
        SMB printing has much improved bounds checks
        OUI 0x0000f8 decoded as encapsulated ethernet for Cisco-custom bridging
        Zephyr support, from Nickolai Zeldovich <kolya@MIT.EDU>.
        Solaris - devices with digits in them. Stefan Hudson <hudson@mbay.net>
        IPX socket 0x85be is for Cisco EIGRP over IPX.
        Improvements to fragmented ESP handling.
        SCTP support from Armando L. Caro Jr. <acaro@mail.eecis.udel.edu>
        Linux ARPHDR_ATM support fixed.
        Added a "netbeui" keyword, which selects NetBEUI packets.
        IPv6 ND improvements, MobileIP dissector, 2292bis-02 for RA option.
        Handle ARPHDR_HDLC from Marcus Felipe Pereira <marcus@task.com.br>.
        Handle IPX socket 0x553 -> NetBIOS-over-IPX socket, "nwlink-dgm"
        Better Linux libc5 compat.
        BIND9 lwres dissector added.
        MIPS and SPARC get strict alignment macros (affects print-bgp.c)
        Apple LocalTalk LINKTYPE_ reserved.
        New time stamp formats documented.
        DHCP6 updated to draft-22.txt spec.
        ICMP types/codes now accept symbolic names.
        Add SIGINFO handler from LBL
        encrypted CIPE tunnels in IRIX, from Franz Schaefer <schaefer@mond.at>.
        now we are -Wstrict-prototype clean.
        NetBSD DLT_PPP_ETHER; adapted from Martin Husemann <martin@netbsd.org>.
        PPPoE dissector cleaned up.
        Support for LocalTalk hardware, from Uns Lider <unslider@miranda.org>.
        In dissector, now the caller prints the IP addresses rather than proto.
        cjclark@alum.mit.edu: print the IP proto for non-initial fragments.
        LLC frames with a DSAP and LSAP of 0xe0 are IPX frames.
        Linux cooked frames with a type value of LINUX_SLL_P_802_3 are IPX.
        captures on the "any" device won't be done in promiscuous mode
        Token Ring support on DLPI - Onno van der Linden <onno@simplex.nl>
        ARCNet support, from NetBSD.
        HSRP dissector, from Julian Cowley <julian@lava.net>.
        Handle (GRE-encapsulated) PPTP
        added -C option to rotate save file every optarg * 1,000,000 bytes.
        support for "vrrp" name - NetBSD, by Klaus Klein <kleink@netbsd.org>.
        PPTP support, from Motonori Shindo <mshindo@mshindo.net>.
        IS-IS over PPP support, from Hannes Gredler <hannes@juniper.net>.
        CNFP support for IPv6,format. Harry Raaymakers <harryr@connect.com.au>.
        ESP printing updated to RFC2406.
        HP-UX can now handle large number of PPAs.
        MSDP printer added.
        L2TP dissector improvements from Motonori Shindo.

Tuesday January 9, 2001. mcr@sandelman.ottawa.on.ca. Summary for 3.6 release
        Cleaned up documentation.
        Promisc mode fixes for Linux
        IPsec changes/cleanups.
        Alignment fixes for picky architectures

        Removed dependency on native headers for packet dissectors.
        Removed Linux specific headers that were shipped

        libpcap changes provide for exchanging capture files between
          systems. Save files now have well known PACKET_ values instead of
          depending upon system dependent mappings of DLT_* types.

        Support for computing/checking IP and UDP/TCP checksums.

        Updated autoconf stock files.

        IPv6 improvements: dhcp (draft-15), mobile-ip6, ppp, ospf6,

        Added dissector support for: ISOCLNS, Token Ring, IGMPv3, bxxp,
                timed, vrrp, radius, chdlc, cnfp, cdp, IEEE802.1d, raw-AppleTalk

        Added filtering support for: VLANs, ESIS, ISIS

        Improvements to: print-telnet, IPTalk, bootp/dhcp, ECN, PPP,
                L2TP, PPPoE

        HP-UX 11.0 -- find the right dlpi device.
        Solaris 8 - IPv6 works
        Linux - Added support for an "any" device to capture on all interfaces

        Security fixes: buffer overrun audit done. Strcpy replaced with
                strlcpy, sprintf replaced with snprintf.
        Look for lex problems, and warn about them.


v3.5 Fri Jan 28 18:00:00 PST 2000

Bill Fenner <fenner@research.att.com>
- switch to config.h for autoconf
- unify RCSID strings
- Updated PIMv1, PIMv2, DVMRP, IGMP parsers, add Cisco Auto-RP parser
- Really fix the RIP printer
- Fix MAC address -> name translation.
- some -Wall -Wformat fixes
- update makemib to parse much of SMIv2
- Print TCP sequence # with -vv even if you normally wouldn't
- Print as much of IP/TCP/UDP headers as possible even if truncated.

itojun@iijlab.net
- -X will make a ascii dump.  from netbsd.
- telnet command sequence decoder (ff xx xx).  from netbsd.
- print-bgp.c: improve options printing.  ugly code exists for
  unaligned option parsing (need some fix).
- const poisoning in SMB decoder.
- -Wall -Werror clean checks.
- bring in KAME IPv6/IPsec decoding code.

Assar Westerlund  <assar@sics.se>
- SNMPv2 and SNMPv3 printer
- If compiled with libsmi, tcpdump can load MIBs on the fly to decode
  SNMP packets.
- Incorporate NFS parsing code from NetBSD.  Adds support for nfsv3.
- portability fixes
- permit building in different directories.

Ken Hornstein <kenh@cmf.nrl.navy.mil>
- bring in code at
  /afs/transarc.com/public/afs-contrib/tools/tcpdump for parsing
  AFS3 packets

Andrew Tridgell <tridge@linuxcare.com>
- SMB printing code

Love <lha@stacken.kth.se>
- print-rx.c: add code for printing MakeDir and StoreStatus.  Also
  change date format to the right one.

Michael C. Richardson  <mcr@sandelman.ottawa.on.ca>
- Created tcpdump.org repository

v3.4 Sat Jul 25 12:40:55 PDT 1998

- Hardwire Linux slip support since it's too hard to detect.

- Redo configuration of "network" libraries (-lsocket and -lnsl) to
  deal with IRIX. Thanks to John Hawkinson (jhawk@mit.edu)

- Added -a which tries to translate network and broadcast addresses to
  names. Suggested by Rob van Nieuwkerk (robn@verdi.et.tudelft.nl)

- Added a configure option to disable gcc.

- Added a "raw" packet printer.

- Not having an interface address is no longer fatal. Requested by John
  Hawkinson.

- Rework signal setup to accommodate Linux.

- OSPF truncation check fix. Also display the type of OSPF packets
  using MD5 authentication. Thanks to Brian Wellington
  (bwelling@tis.com)

- Fix truncation check bugs in the Kerberos printer. Reported by Ezra
  Peisach (epeisach@mit.edu)

- Don't catch SIGHUP when invoked with nohup(1). Thanks to Dave Plonka
  (plonka@mfa.com)

- Specify full install target as a way of detecting if install
  directory does not exist. Thanks to Dave Plonka.

- Bit-swap FDDI addresses for BSD/OS too. Thanks to Paul Vixie
  (paul@vix.com)

- Fix off-by-one bug when testing size of ethernet packets. Thanks to
  Marty Leisner (leisner@sdsp.mc.xerox.com)

- Add a local autoconf macro to check for routines in libraries; the
  autoconf version is broken (it only puts the library name in the
  cache variable name). Thanks to John Hawkinson.

- Add a local autoconf macro to check for types; the autoconf version
  is broken (it uses grep instead of actually compiling a code fragment).

- Modified to support the new BSD/OS 2.1 PPP and SLIP link layer header
  formats.

- Extend OSF ip header workaround to versions 1 and 2.

- Fix some signed problems in the nfs printer. As reported by David
  Sacerdote (davids@silence.secnet.com)

- Detect group wheel and use it as the default since BSD/OS' install
  can't hack numeric groups. Reported by David Sacerdote.

- AIX needs special loader options. Thanks to Jonathan I. Kamens
  (jik@cam.ov.com)

- Fixed the nfs printer to print port numbers in decimal. Thanks to
  Kent Vander Velden (graphix@iastate.edu)

- Find installed libpcap in /usr/local/lib when not using gcc.

- Disallow network masks with non-network bits set.

- Attempt to detect "egcs" versions of gcc.

- Add missing closing double quotes when displaying bootp strings.
  Reported by Viet-Trung Luu (vluu@picard.math.uwaterloo.ca)

v3.3 Sat Nov 30 20:56:27 PST 1996

- Added Linux support.

- GRE encapsulated packet printer thanks to John Hawkinson
  (jhawk@mit.edu)

- Rewrite gmt2local() to avoid problematic os dependencies.

- Suppress nfs truncation message on errors.

- Add missing m4 quoting in AC_LBL_UNALIGNED_ACCESS autoconf macro.
  Reported by Joachim Ott (ott@ardala.han.de)

- Enable "ip_hl vs. ip_vhl" workaround for OSF4 too.

- Print arp hardware type in host order. Thanks to Onno van der Linden
  (onno@simplex.nl)

- Avoid solaris compiler warnings. Thanks to Bruce Barnett
  (barnett@grymoire.crd.ge.com)

- Fix rip printer to not print one more route than is actually in the
  packet. Thanks to Jean-Luc Richier (Jean-Luc.Richier@imag.fr) and
  Bill Fenner (fenner@parc.xerox.com)

- Use autoconf endian detection since BYTE_ORDER isn't defined on all systems.

- Fix dvmrp printer truncation checks and add a dvmrp probe printer.
  Thanks to Danny J. Mitzel (mitzel@ipsilon.com)

- Rewrite ospf printer to improve truncation checks.

- Don't parse tcp options past the EOL. As noted by David Sacerdote
  (davids@secnet.com). Also, check tcp options to make sure they ar
  actually in the tcp header (in addition to the normal truncation
  checks). Fix the SACK code to print the N blocks (instead of the
  first block N times).

- Don't say really small UDP packets are truncated just because they
  aren't big enough to be a RPC. As noted by David Sacerdote.

v3.2.1 Sun Jul 14 03:02:26 PDT 1996

- Added rfc1716 icmp codes as suggested by Martin Fredriksson
  (martin@msp.se)

- Print mtu for icmp unreach need frag packets. Thanks to John
  Hawkinson (jhawk@mit.edu)

- Decode icmp router discovery messages. Thanks to Jeffrey Honig
  (jch@bsdi.com)

- Added a printer entry for DLT_IEEE802 as suggested by Tak Kushida
  (kushida@trl.ibm.co.jp)

- Check igmp checksum if possible. Thanks to John Hawkinson.

- Made changes for SINIX. Thanks to Andrej Borsenkow
  (borsenkow.msk@sni.de)

- Use autoconf's idea of the top level directory in install targets.
  Thanks to John Hawkinson.

- Avoid infinite loop in tcp options printing code. Thanks to Jeffrey
  Mogul (mogul@pa.dec.com)

- Avoid using -lsocket in IRIX 5.2 and earlier since it breaks snoop.
  Thanks to John Hawkinson.

- Added some more packet truncation checks.

- On systems that have it, use sigset() instead of signal() since
  signal() has different semantics on these systems.

- Fixed some more alignment problems on the alpha.

- Add code to massage unprintable characters in the domain and ipx
  printers. Thanks to John Hawkinson.

- Added explicit netmask support. Thanks to Steve Nuchia
  (steve@research.oknet.com)

- Add "sca" keyword (for DEC cluster services) as suggested by Terry
  Kennedy (terry@spcvxa.spc.edu)

- Add "atalk" keyword as suggested by John Hawkinson.

- Added an igrp printer. Thanks to Francis Dupont
  (francis.dupont@inria.fr)

- Print IPX net numbers in hex a la Novell Netware. Thanks to Terry
  Kennedy (terry@spcvxa.spc.edu)

- Fixed snmp extended tag field parsing bug. Thanks to Pascal Hennequin
  (pascal.hennequin@hugo.int-evry.fr)

- Added some ETHERTYPEs missing on some systems.

- Added truncated packet macros and various checks.

- Fixed endian problems with the DECnet printer.

- Use $CC when checking gcc version. Thanks to Carl Lindberg
  (carl_lindberg@blacksmith.com)

- Fixes for AIX (although this system is not yet supported). Thanks to
  John Hawkinson.

- Fix bugs in the autoconf misaligned accesses code fragment.

- Include sys/param.h to get BYTE_ORDER in a few places. Thanks to
  Pavlin Ivanov Radoslavov (pavlin@cs.titech.ac.jp)

v3.2 Sun Jun 23 02:28:10 PDT 1996

- Print new icmp unreachable codes as suggested by Martin Fredriksson
  (martin@msp.se). Also print code value when unknown for icmp redirect
  and time exceeded.

- Fix an alignment endian bug in getname(). Thanks to John Hawkinson.

- Define "new" domain record types if not found in arpa/nameserv.h.
  Resulted from a suggestion from John Hawkinson (jhawk@mit.edu). Also
  fixed an endian bug when printing mx record and added some new record
  types.

- Added RIP V2 support. Thanks to Jeffrey Honig (jch@bsdi.com)

- Added T/TCP options printing. As suggested by Richard Stevens
  (rstevens@noao.edu)

- Use autoconf to detect architectures that can't handle misaligned
  accesses.

v3.1 Thu Jun 13 20:59:32 PDT 1996

- Changed u_int32/int32 to u_int32_t/int32_t to be consistent with bsd
  and bind (as suggested by Charles Hannum).

- Port to GNU autoconf.

- Add support for printing DVMRP and PIM traffic thanks to
  Havard Eidnes (Havard.Eidnes@runit.sintef.no).

- Fix AppleTalk, IPX and DECnet byte order problems due to wrong endian
  define being referenced. Reported by Terry Kennedy.

- Minor fixes to the man page thanks to Mark Andrews.

- Endian fixes to RTP and vat packet dumpers, thanks to Bruce Mah
  (bmah@cs.berkeley.edu).

- Added support for new dns types, thanks to Rainer Orth.

- Fixed tftp_print() to print the block number for ACKs.

- Document -dd and -ddd. Resulted from a bug report from Charlie Slater
  (cslater@imatek.com).

- Check return status from malloc/calloc/etc.

- Check return status from pcap_loop() so we can print an error and
  exit with a bad status if there were problems.

- Bail if ip option length is <= 0. Resulted from a bug report from
  Darren Reed (darrenr@vitruvius.arbld.unimelb.edu.au).

- Print out a little more information for sun rpc packets.

- Add support for Kerberos 4 thanks to John Hawkinson (jhawk@mit.edu).

- Fixed the Fix EXTRACT_SHORT() and EXTRACT_LONG() macros (which were
  wrong on little endian machines).

- Fixed alignment bug in ipx_decode(). Thanks to Matt Crawford
  (crawdad@fnal.gov).

- Fix ntp_print() to not print garbage when the stratum is
  "unspecified." Thanks to Deus Ex Machina (root@belle.bork.com).

- Rewrote tcp options printer code to check for truncation. Added
  selective acknowledgment case.

- Fixed an endian bug in the ospf printer. Thanks to Jeffrey C Honig
  (jch@bsdi.com)

- Fix rip printer to handle 4.4 BSD sockaddr struct which only uses one
  octet for the sa_family member. Thanks to Yoshitaka Tokugawa
  (toku@dit.co.jp)

- Don't checksum ip header if we don't have all of it. Thanks to John
  Hawkinson (jhawk@mit.edu).

- Print out hostnames if possible in egp printer. Thanks to Jeffrey
  Honig (jhc@bsdi.com)


v3.1a1 Wed May  3 19:21:11 PDT 1995

- Include time.h when SVR4 is defined to avoid problems under Solaris
  2.3.

- Fix etheraddr_string() in the ETHER_SERVICE to return the saved
  strings, not the local buffer. Thanks to Stefan Petri
  (petri@ibr.cs.tu-bs.de).

- Detect when pcap raises the snaplen (e.g. with snit). Print a warning
  that the selected value was not used. Thanks to Pascal Hennequin
  (Pascal.Hennequin@hugo.int-evry.fr).

- Add a truncated packet test to print-nfs.c. Thanks to Pascal Hennequin.

- BYTEORDER -> BYTE_ORDER Thanks to Terry Kennedy (terry@spcvxa.spc.edu).

v3.0.3 Sun Oct  1 18:35:00 GMT 1995

- Although there never was a 3.0.3 release, the linux boys cleverly
  "released" one in late 1995.

v3.0.2 Thu Apr 20 21:28:16 PDT 1995

- Change configuration to not use gcc v2 flags with gcc v1.

- Redo gmt2local() so that it works under BSDI (which seems to return
  an empty timezone struct from gettimeofday()). Based on report from
  Terry Kennedy (terry@spcvxa.spc.edu).

- Change configure to recognize IP[0-9]* as "mips" SGI hardware. Based
  on report from Mark Andrews (mandrews@alias.com).

- Don't pass cc flags to gcc. Resulted from a bug report from Rainer
  Orth (ro@techfak.uni-bielefeld.de).

- Fixed printout of connection id for uncompressed tcp slip packets.
  Resulted from a bug report from Richard Stevens (rstevens@noao.edu).

- Hack around deficiency in Ultrix's make.

- Add ETHERTYPE_TRAIL define which is missing from irix5.

v3.0.1 Wed Aug 31 22:42:26 PDT 1994

- Fix problems with gcc2 vs. malloc() and read() prototypes under SunOS 4.

v3.0 Mon Jun 20 19:23:27 PDT 1994

- Added support for printing tcp option timestamps thanks to
  Mark Andrews (mandrews@alias.com).

- Reorganize protocol dumpers to take const pointers to packets so they
  never change the contents (i.e., they used to do endian conversions
  in place).  Previously, whenever more than one pass was taken over
  the packet, the packet contents would be dumped incorrectly (i.e.,
  the output form -x would be wrong on little endian machines because
  the protocol dumpers would modify the data).  Thanks to Charles Hannum
  (mycroft@gnu.ai.mit.edu) for reporting this problem.

- Added support for decnet protocol dumping thanks to Jeff Mogul
  (mogul@pa.dec.com).

- Fix bug that caused length of packet to be incorrectly printed
  (off by ether header size) for unknown ethernet types thanks
  to Greg Miller (gmiller@kayak.mitre.org).

- Added support for IPX protocol dumping thanks to Brad Parker
  (brad@fcr.com).

- Added check to verify IP header checksum under -v thanks to
  Brad Parker (brad@fcr.com).

- Move packet capture code to new libpcap library (which is
  packaged separately).

- Prototype everything and assume an ansi compiler.

- print-arp.c: Print hardware ethernet addresses if they're not
  what we expect.

- print-bootp.c: Decode the cmu vendor field. Add RFC1497 tags.
  Many helpful suggestions from Gordon Ross (gwr@jericho.mc.com).

- print-fddi.c: Improvements. Thanks to Jeffrey Mogul
  (mogul@pa.dec.com).

- print-icmp.c: Byte swap netmask before printing. Thanks to
  Richard Stevens (rstevens@noao.edu). Print icmp type when unknown.

- print-ip.c: Print the inner ip datagram of ip-in-ip encapsulated packets.
  By default, only the inner packet is dumped, appended with the token
  "(encap)".  Under -v, both the inner and output packets are dumped
  (on the same line).  Note that the filter applies to the original packet,
  not the encapsulated packet.  So if you run tcpdump on a net with an
  IP Multicast tunnel, you cannot filter out the datagrams using the
  conventional syntax.  (You can filter away all the ip-in-ip traffic
  with "not ip proto 4".)

- print-nfs.c: Keep pending rpc's in circular table. Add generic
  nfs header and remove os dependences. Thanks to Jeffrey Mogul.

- print-ospf.c: Improvements. Thanks to Jeffrey Mogul.

- tcpdump.c: Add -T flag allows interpretation of "vat", "wb", "rpc"
  (sunrpc) and rtp packets. Added "inbound" and "outbound" keywords
  Add && and || operators

v2.2.1 Tue Jun 6 17:57:22 PDT 1992

- Fix bug with -c flag.

v2.2 Fri May 22 17:19:41 PDT 1992

- savefile.c: Remove hack that shouldn't have been exported. Add
  truncate checks.

- Added the 'icmp' keyword.  For example, 'icmp[0] != 8 and icmp[0] != 0'
  matches non-echo/reply ICMP packets.

- Many improvements to filter code optimizer.

- Added 'multicast' keyword and extended the 'broadcast' keyword can now be
  so that protocol qualifications are allowed. For example, "ip broadcast"
  and "ether multicast" are valid filters.

- Added support for monitoring the loopback interface (i.e. 'tcpdump -i lo').
  Jeffrey Honig (jch@MITCHELL.CIT.CORNELL.EDU) contributed the kernel
  patches to netinet/if_loop.c.

- Added support for the Ungermann-Bass Ethernet on IBM/PC-RTs running AOS.
  Contact Jeffrey Honig (jch@MITCHELL.CIT.CORNELL.EDU) for the diffs.

- Added EGP and OSPF printers, thanks to Jeffrey Honig.

v2.1 Tue Jan 28 11:00:14 PST 1992

- Internal release (never publicly exported).

v2.0.1 Sun Jan 26 21:10:10 PDT

- Various byte ordering fixes.

- Add truncation checks.

- inet.c: Support BSD style SIOCGIFCONF.

- nametoaddr.c: Handle multi addresses for single host.

- optimize.c: Rewritten.

- pcap-bpf.c: don't choke when we get ptraced. only set promiscuous
  for broadcast nets.

- print-atal.c: Fix an alignment bug (thanks to
  stanonik@nprdc.navy.mil) Add missing printf() argument.

- print-bootp.c: First attempt at decoding the vendor buffer.

- print-domain.c: Fix truncation checks.

- print-icmp.c: Calculate length of packets from the ip header.

- print-ip.c: Print frag id in decimal (so it's easier to match up
  with non-frags). Add support for ospf, egp and igmp.

- print-nfs.c: Lots of changes.

- print-ntp.c: Make some verbose output depend on -v.

- print-snmp.c: New version from John LoVerso.

- print-tcp.c: Print rfc1072 tcp options.

- tcpdump.c: Print "0x" prefix for %x formats. Always print 6 digits
  (microseconds) worth of precision. Fix uid bugs.

- A packet dumper has been added (thanks to Jeff Mogul of DECWRL).
  With this option, you can create an architecture independent binary
  trace file in real time, without the overhead of the packet printer.
  At a later time, the packets can be filtered (again) and printed.

- BSD is supported.  You must have BPF in your kernel.
  Since the filtering is now done in the kernel, fewer packets are
  dropped.  In fact, with BPF and the packet dumper option, a measly
  Sun 3/50 can keep up with a busy network.

- Compressed SLIP packets can now be dumped, provided you use our
  SLIP software and BPF.  These packets are dumped as any other IP
  packet; the compressed headers are dumped with the '-e' option.

- Machines with little-endian byte ordering are supported (thanks to
  Jeff Mogul).

- Ultrix 4.0 is supported (also thanks to Jeff Mogul).

- IBM RT and Stanford Enetfilter support has been added by
  Rayan Zachariassen <rayan@canet.ca>.  tcpdump has been tested under
  both the vanilla Enetfilter interface, and the extended interface
  (#ifdef'd by IBMRTPC) present in the MERIT version of the Enetfilter.

- TFTP packets are now printed (requests only).

- BOOTP packets are now printed.

- SNMP packets are now printed. (thanks to John LoVerso of Xylogics).

- Sparc architectures, including the Sparcstation-1, are now
  supported thanks to Steve McCanne and Craig Leres.

- SunOS 4 is now supported thanks to Micky Liu of Columbia
  University (micky@cunixc.cc.columbia.edu).

- IP options are now printed.

- RIP packets are now printed.

- There's a -v flag that prints out more information than the
  default (e.g., it will enable printing of IP ttl, tos and id)
  and -q flag that prints out less (e.g., it will disable
  interpretation of AppleTalk-in-UDP).

- The grammar has undergone substantial changes (if you have an
  earlier version of tcpdump, you should re-read the manual
  entry).

  The most useful change is the addition of an expression
  syntax that lets you filter on arbitrary fields or values in the
  packet.  E.g., "ip[0] > 0x45" would print only packets with IP
  options, "tcp[13] & 3 != 0" would print only TCP SYN and FIN
  packets.

  The most painful change is that concatenation no longer means
  "and" -- e.g., you have to say "host foo and port bar" instead
  of "host foo port bar".  The up side to this down is that
  repeated qualifiers can be omitted, making most filter
  expressions shorter.  E.g., you can now say "ip host foo and
  (bar or baz)" to look at ip traffic between hosts foo and bar or
  between hosts foo and baz.  [The old way of saying this was "ip
  host foo and (ip host bar or ip host baz)".]

v2.0 Sun Jan 13 12:20:40 PST 1991

- Initial public release.