The Tcpdump Group git mirrors - tcpdump/blob - print-sunatm.c

   1 /*
   2  * Copyright (c) 1997 Yen Yen Lim and North Dakota State University
   3  * All rights reserved.
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  * 1. Redistributions of source code must retain the above copyright
   9  *    notice, this list of conditions and the following disclaimer.
  10  * 2. Redistributions in binary form must reproduce the above copyright
  11  *    notice, this list of conditions and the following disclaimer in the
  12  *    documentation and/or other materials provided with the distribution.
  13  * 3. All advertising materials mentioning features or use of this software
  14  *    must display the following acknowledgement:
  15  *      This product includes software developed by Yen Yen Lim and
  16         North Dakota State University
  17  * 4. The name of the author may not be used to endorse or promote products
  18  *    derived from this software without specific prior written permission.
  19  *
  20  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  21  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  22  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  23  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
  24  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  25  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  26  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  28  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
  29  * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  30  * POSSIBILITY OF SUCH DAMAGE.
  31  */
  32
  33 /* \summary: SunATM DLPI capture printer */
  34
  35 #ifdef HAVE_CONFIG_H
  36 #include <config.h>
  37 #endif
  38
  39 #include "netdissect-stdinc.h"
  40
  41 #include "netdissect.h"
  42 #include "extract.h"
  43
  44 #include "atm.h"
  45
  46 /* SunATM header for ATM packet */
  47 #define DIR_POS         0       /* Direction (0x80 = transmit, 0x00 = receive) */
  48 #define VPI_POS         1       /* VPI */
  49 #define VCI_POS         2       /* VCI */
  50 #define PKT_BEGIN_POS   4       /* Start of the ATM packet */
  51
  52 /* Protocol type values in the bottom for bits of the byte at SUNATM_DIR_POS. */
  53 #define PT_LANE         0x01    /* LANE */
  54 #define PT_LLC          0x02    /* LLC encapsulation */
  55
  56 /*
  57  * This is the top level routine of the printer.  'p' points
  58  * to the SunATM pseudo-header for the packet, 'h->ts' is the timestamp,
  59  * 'h->len' is the length of the packet off the wire, and 'h->caplen'
  60  * is the number of bytes actually captured.
  61  */
  62 u_int
  63 sunatm_if_print(netdissect_options *ndo,
  64                 const struct pcap_pkthdr *h, const u_char *p)
  65 {
  66         u_int caplen = h->caplen;
  67         u_int length = h->len;
  68         u_short vci;
  69         u_char vpi;
  70         u_int traftype;
  71
  72         ndo->ndo_protocol = "sunatm_if";
  73         if (caplen < PKT_BEGIN_POS) {
  74                 nd_print_trunc(ndo);
  75                 return (caplen);
  76         }
  77
  78         if (ndo->ndo_eflag) {
  79                 ND_PRINT(EXTRACT_U_1(p + DIR_POS) & 0x80 ? "Tx: " : "Rx: ");
  80         }
  81
  82         switch (EXTRACT_U_1(p + DIR_POS) & 0x0f) {
  83
  84         case PT_LANE:
  85                 traftype = ATM_LANE;
  86                 break;
  87
  88         case PT_LLC:
  89                 traftype = ATM_LLC;
  90                 break;
  91
  92         default:
  93                 traftype = ATM_UNKNOWN;
  94                 break;
  95         }
  96
  97         vci = EXTRACT_BE_U_2(p + VCI_POS);
  98         vpi = EXTRACT_U_1(p + VPI_POS);
  99
 100         p += PKT_BEGIN_POS;
 101         caplen -= PKT_BEGIN_POS;
 102         length -= PKT_BEGIN_POS;
 103         atm_print(ndo, vpi, vci, traftype, p, length, caplen);
 104
 105         return (PKT_BEGIN_POS);
 106 }